- 13 12月, 2019 4 次提交
-
-
由 Nicolas Dichtel 提交于
commit 22d6552f827ef76ade3edf6bbb3f05048a0a7d8b upstream. With the current implementation, phydev cannot be removed: $ ip link add dummy type dummy $ ip link add xfrm1 type xfrm dev dummy if_id 1 $ ip l d dummy kernel:[77938.465445] unregister_netdevice: waiting for dummy to become free. Usage count = 1 Manage it like in ip tunnels, ie just keep the ifindex. Not that the side effect, is that the phydev is now optional. Fixes: f203b76d ("xfrm: Add virtual xfrm interfaces") Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: NJulien Floret <julien.floret@6wind.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Nicolas Dichtel 提交于
commit c5d1030f23002430c2a336b2b629b9d6f72b3564 upstream. dev_net(dev) is the netns of the device and xi->net is the link netns, where the device has been linked. changelink() must operate in the link netns to avoid a corruption of the xfrm lists. Note that xi->net and dev_net(xi->physdev) are always the same. Before the patch, the xfrmi lists may be corrupted and can later trigger a kernel panic. Fixes: f203b76d ("xfrm: Add virtual xfrm interfaces") Reported-by: NJulien Floret <julien.floret@6wind.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: NJulien Floret <julien.floret@6wind.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Nicolas Dichtel 提交于
commit e9e7e85d75f3731079ffd77c1a66f037aef04fe7 upstream. The new parameters must not be stored in the netdev_priv() before validation, it may corrupt the interface. Note also that if data is NULL, only a memset() is done. $ ip link add xfrm1 type xfrm dev lo if_id 1 $ ip link add xfrm2 type xfrm dev lo if_id 2 $ ip link set xfrm1 type xfrm dev lo if_id 2 RTNETLINK answers: File exists $ ip -d link list dev xfrm1 5: xfrm1@lo: <NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/none 00:00:00:00:00:00 brd 00:00:00:00:00:00 promiscuity 0 minmtu 68 maxmtu 1500 xfrm if_id 0x2 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 => "if_id 0x2" Fixes: f203b76d ("xfrm: Add virtual xfrm interfaces") Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: NJulien Floret <julien.floret@6wind.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> -
由 Nicolas Dichtel 提交于
commit 56c5ee1a5823e9cf5288b84ae6364cb4112f8225 upstream. The following commands produce a backtrace and return an error but the xfrm interface is created (in the wrong netns): $ ip netns add foo $ ip netns add bar $ ip -n foo netns set bar 0 $ ip -n foo link add xfrmi0 link-netnsid 0 type xfrm dev lo if_id 23 RTNETLINK answers: Invalid argument $ ip -n bar link ls xfrmi0 2: xfrmi0@lo: <NOARP,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/none 00:00:00:00:00:00 brd 00:00:00:00:00:00 Here is the backtrace: [ 79.879174] WARNING: CPU: 0 PID: 1178 at net/core/dev.c:8172 rollback_registered_many+0x86/0x3c1 [ 79.880260] Modules linked in: xfrm_interface nfsv3 nfs_acl auth_rpcgss nfsv4 nfs lockd grace sunrpc fscache button parport_pc parport serio_raw evdev pcspkr loop ext4 crc16 mbcache jbd2 crc32c_generic ide_cd_mod ide_gd_mod cdrom ata_$ eneric ata_piix libata scsi_mod 8139too piix psmouse i2c_piix4 ide_core 8139cp mii i2c_core floppy [ 79.883698] CPU: 0 PID: 1178 Comm: ip Not tainted 5.2.0-rc6+ #106 [ 79.884462] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 79.885447] RIP: 0010:rollback_registered_many+0x86/0x3c1 [ 79.886120] Code: 01 e8 d7 7d c6 ff 0f 0b 48 8b 45 00 4c 8b 20 48 8d 58 90 49 83 ec 70 48 8d 7b 70 48 39 ef 74 44 8a 83 d0 04 00 00 84 c0 75 1f <0f> 0b e8 61 cd ff ff 48 b8 00 01 00 00 00 00 ad de 48 89 43 70 66 [ 79.888667] RSP: 0018:ffffc900015ab740 EFLAGS: 00010246 [ 79.889339] RAX: ffff8882353e5700 RBX: ffff8882353e56a0 RCX: ffff8882353e5710 [ 79.890174] RDX: ffffc900015ab7e0 RSI: ffffc900015ab7e0 RDI: ffff8882353e5710 [ 79.891029] RBP: ffffc900015ab7e0 R08: ffffc900015ab7e0 R09: ffffc900015ab7e0 [ 79.891866] R10: ffffc900015ab7a0 R11: ffffffff82233fec R12: ffffc900015ab770 [ 79.892728] R13: ffffffff81eb7ec0 R14: ffff88822ed6cf00 R15: 00000000ffffffea [ 79.893557] FS: 00007ff350f31740(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 [ 79.894581] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 79.895317] CR2: 00000000006c8580 CR3: 000000022c272000 CR4: 00000000000006f0 [ 79.896137] Call Trace: [ 79.896464] unregister_netdevice_many+0x12/0x6c [ 79.896998] __rtnl_newlink+0x6e2/0x73b [ 79.897446] ? __kmalloc_node_track_caller+0x15e/0x185 [ 79.898039] ? pskb_expand_head+0x5f/0x1fe [ 79.898556] ? stack_access_ok+0xd/0x2c [ 79.899009] ? deref_stack_reg+0x12/0x20 [ 79.899462] ? stack_access_ok+0xd/0x2c [ 79.899927] ? stack_access_ok+0xd/0x2c [ 79.900404] ? __module_text_address+0x9/0x4f [ 79.900910] ? is_bpf_text_address+0x5/0xc [ 79.901390] ? kernel_text_address+0x67/0x7b [ 79.901884] ? __kernel_text_address+0x1a/0x25 [ 79.902397] ? unwind_get_return_address+0x12/0x23 [ 79.903122] ? __cmpxchg_double_slab.isra.37+0x46/0x77 [ 79.903772] rtnl_newlink+0x43/0x56 [ 79.904217] rtnetlink_rcv_msg+0x200/0x24c In fact, each time a xfrm interface was created, a netdev was allocated by __rtnl_newlink()/rtnl_create_link() and then another one by xfrmi_newlink()/xfrmi_create(). Only the second one was registered, it's why the previous commands produce a backtrace: dev_change_net_namespace() was called on a netdev with reg_state set to NETREG_UNINITIALIZED (the first one). CC: Lorenzo Colitti <lorenzo@google.com> CC: Benedict Wong <benedictwong@google.com> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Shannon Nelson <shannon.nelson@oracle.com> CC: Antony Antony <antony@phenome.org> CC: Eyal Birger <eyal.birger@gmail.com> Fixes: f203b76d ("xfrm: Add virtual xfrm interfaces") Reported-by: NJulien Floret <julien.floret@6wind.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 26 5月, 2019 1 次提交
-
-
由 Martin Willi 提交于
[ Upstream commit 025c65e119bf58b610549ca359c9ecc5dee6a8d2 ] If an xfrmi is associated to a vrf layer 3 master device, xfrm_policy_check() fails after traffic decapsulation. The input interface is replaced by the layer 3 master device, and hence xfrmi_decode_session() can't match the xfrmi anymore to satisfy policy checking. Extend ingress xfrmi lookup to honor the original layer 3 slave device, allowing xfrm interfaces to operate within a vrf domain. Fixes: f203b76d ("xfrm: Add virtual xfrm interfaces") Signed-off-by: NMartin Willi <martin@strongswan.org> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
- 24 3月, 2019 1 次提交
-
-
由 Tobias Brunner 提交于
[ Upstream commit 660899ddf06ae8bb5bbbd0a19418b739375430c5 ] After moving an XFRM interface to another namespace it stays associated with the original namespace (net in `struct xfrm_if` and the list keyed with `xfrmi_net_id`), allowing processes in the new namespace to use SAs/policies that were created in the original namespace. For instance, this allows a keying daemon in one namespace to establish IPsec SAs for other namespaces without processes there having access to the keys or IKE credentials. This worked fine for outbound traffic, however, for inbound traffic the lookup for the interfaces and the policies used the incorrect namespace (the one the XFRM interface was moved to). Fixes: f203b76d ("xfrm: Add virtual xfrm interfaces") Signed-off-by: NTobias Brunner <tobias@strongswan.org> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
- 02 10月, 2018 1 次提交
-
-
由 Li RongQing 提交于
The device gro_cells has been initialized, it should be freed, otherwise it will be leaked Fixes: f203b76d ("xfrm: Add virtual xfrm interfaces") Signed-off-by: NZhang Yu <zhangyu31@baidu.com> Signed-off-by: NLi RongQing <lirongqing@baidu.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 27 7月, 2018 1 次提交
-
-
由 kbuild test robot 提交于
net/xfrm/xfrm_interface.c:692:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Fixes: 44e2b838 ("xfrm: Return detailed errors from xfrmi_newlink") CC: Benedict Wong <benedictwong@google.com> Signed-off-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 26 7月, 2018 1 次提交
-
-
由 Benedict Wong 提交于
Currently all failure modes of xfrm interface creation return EEXIST. This change improves the granularity of errnos provided by also returning ENODEV or EINVAL if failures happen in looking up the underlying interface, or a required parameter is not provided. This change has been tested against the Android Kernel Networking Tests, with additional xfrmi_newlink tests here: https://android-review.googlesource.com/c/kernel/tests/+/715755Signed-off-by: NBenedict Wong <benedictwong@google.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 20 7月, 2018 1 次提交
-
-
由 Benedict Wong 提交于
In order to remove performance impact of having the extra u32 in every single flowi, this change removes the flowi_xfrm struct, prefering to take the if_id as a method parameter where needed. In the inbound direction, if_id is only needed during the __xfrm_check_policy() function, and the if_id can be determined at that point based on the skb. As such, xfrmi_decode_session() is only called with the skb in __xfrm_check_policy(). In the outbound direction, the only place where if_id is needed is the xfrm_lookup() call in xfrmi_xmit2(). With this change, the if_id is directly passed into the xfrm_lookup_with_ifid() call. All existing callers can still call xfrm_lookup(), which uses a default if_id of 0. This change does not change any behavior of XFRMIs except for improving overall system performance via flowi size reduction. This change has been tested against the Android Kernel Networking Tests: https://android.googlesource.com/kernel/tests/+/master/net/testSigned-off-by: NBenedict Wong <benedictwong@google.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 23 6月, 2018 1 次提交
-
-
由 Steffen Klassert 提交于
This patch adds support for virtual xfrm interfaces. Packets that are routed through such an interface are guaranteed to be IPsec transformed or dropped. It is a generic virtual interface that ensures IPsec transformation, no need to know what happens behind the interface. This means that we can tunnel IPv4 and IPv6 through the same interface and support all xfrm modes (tunnel, transport and beet) on it. Co-developed-by: NLorenzo Colitti <lorenzo@google.com> Co-developed-by: NBenedict Wong <benedictwong@google.com> Signed-off-by: NLorenzo Colitti <lorenzo@google.com> Signed-off-by: NBenedict Wong <benedictwong@google.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Acked-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NBenedict Wong <benedictwong@google.com> Tested-by: NAntony Antony <antony@phenome.org> Reviewed-by: NEyal Birger <eyal.birger@gmail.com>
-