This commit reworks device initialization so that we always enable the
FIFO at driver load, deferring SVGA enable until either first modeset
or fbdev enable.
This should always leave the fifo properly enabled for render- and
control nodes.
In addition,
*) We disable the use of VRAM when SVGA is not enabled.
*) We simplify PM support so that we only throw out resources on hibernate,
not on suspend, since the device keeps its state on suspend.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

A regression introduced when the master ttm lock was split into two.
Reported-and-tested-by: NBrian Paul <brianp@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>

Merge tag 'topic/connector-locking-2015-07-23' of git://anongit.freedesktop.org/drm-intel into drm-next

connector hotplug locking cleanup and fixes to make it save against
atomic. Note that because of depencies this is based on top of the
drm-intel-next pull, so that one needs to go in before this one.

I've also thrown in the mode_group removal on top since it's defunct,
never worked really, no one seems to care and the code can be resurrected
easily.

* tag 'topic/connector-locking-2015-07-23' of git://anongit.freedesktop.org/drm-intel:
  drm: gc now dead mode_group code
  drm: Stop filtering according to mode_group in getresources
  drm: Roll out drm_for_each_{plane,crtc,encoder}
  drm/cma-helper: Fix locking in drm_fb_cma_debugfs_show
  drm: Roll out drm_for_each_connector more
  drm: Amend connector list locking rules
  drm/radeon: Take all modeset locks for DP MST hotplug
  drm/i915: Take all modeset locks for DP MST hotplug
  drm: Check locking in drm_for_each_fb
  drm/i915: Use drm_for_each_fb in i915_debugfs.c
  drm: Check locking in drm_for_each_connector
  drm/fbdev-helper: Grab mode_config.mutex in drm_fb_helper_single_add_all_connectors
  drm/probe-helper: Grab mode_config.mutex in poll_init/enable
  drm: Add modeset object iterators
  drm: Simplify drm_for_each_legacy_plane arguments

crystalcove pmic support from Shobhit. Patch series has all acks/r-bs from
other mainainers so ok to pull into drm-next. But I'm cc'ing all other
maintainers as fyi and in case they want to pull it into their trees too
to avoid conflicts.

* tag 'topic/crc-pmic-2015-07-23' of git://anongit.freedesktop.org/drm-intel:
  mfd: Add GPIOLIB dependency if INTEL_SOC_PMIC is to be enabled
  drm/i915: Backlight control using CRC PMIC based PWM driver
  drm/i915: Use the CRC gpio for panel enable/disable
  pwm: crc: Add Crystalcove (CRC) PWM driver
  mfd: intel_soc_pmic_core: ADD PWM lookup table for CRC PMIC based PWM
  mfd: intel_soc_pmic_crc: Add PWM cell device for Crystalcove PMIC
  mfd: intel_soc_pmic_core: Add lookup table for Panel Control as GPIO signal
  gpiolib: Add support for removing registered consumer lookup table

- prelim hw support dropped for skl after Damien fixed an ABI issue around
  planes
- legacy modesetting is done using atomic infrastructure now (Maarten)!
- more gen9 workarounds (Arun&Nick)
- MOCS programming (cache control for better performance) for skl/bxt
- vlv/chv dpll improvements (Ville)
- PSR fixes from Rodrigo
- fbc improvements from Paulo
- plumb requests into execlist submit functions (Mika)
- opregion code cleanup from Jani
- resource streamer support from Abdiel for mesa
- final fixes for 12bpc hdmi + enabling support from Ville
drm-intel-next-2015-07-03:
- dsi improvements (Gaurav)
- bxt ddi dpll hw state readout (Imre)
- chv dvfs support and overall wm improvements for both vlv and chv (Ville)
- ppgtt polish from Mika and Michel
- cdclk support for bxt (Bob Pauwe)
- make frontbuffer tracking more precise
- OLR removal (John Harrison)
- per-ctx WA batch buffer support (Arun Siluvery)
- remvoe KMS Kconfig option (Chris)
- more hpd handling refactoring from Jani
- use atomic states throughout modeset code and integrate with atomic plane
  update (Maarten)
drm-intel-next-2015-06-19:
- refactoring hpd irq handlers (Jani)
- polish skl dpll code a bit (Damien)
- dynamic cdclk adjustement (Ville & Mika)
- fix up 12bpc hdmi and enable it for real again (Ville)
- extend hsw cmd parser to be useful for atomic configuration (Franscico Jerez)
- even more atomic conversion and rolling state handling out across modeset code
  from Maarten & Ander
- fix DRRS idleness detection (Ramalingam)
- clean up dsp address alignment handling (Ville)
- some fbc cleanup patches from Paulo
- prevent hard-hangs when trying to reset the gpu on skl (Mika)

* tag 'drm-intel-next-2015-07-17' of git://anongit.freedesktop.org/drm-intel: (386 commits)
  drm/i915: Update DRIVER_DATE to 20150717
  drm/i915/skl: Drop the preliminary_hw_support flag
  drm/i915/skl: Don't expose the top most plane on gen9 display
  drm/i915: Fix divide by zero on watermark update
  drm/i915: Invert fastboot check
  drm/i915: Clarify logic for initial modeset
  drm/i915: Unconditionally check gmch pfit state
  drm/i915: always disable irqs in intel_pipe_update_start
  drm/i915: Remove use of runtime pm in atomic commit functions
  drm/i915: Call plane update functions directly from intel_atomic_commit.
  drm/i915: Use full atomic modeset.
  drm/i915/gen9: Add WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken
  drm/i915/gen9: Add WaFlushCoherentL3CacheLinesAtContextSwitch workaround
  drm/i915/gen9: Add WaDisableCtxRestoreArbitration workaround
  drm/i915: Enable WA batch buffers for Gen9
  drm/i915/gen9: Implement WaDisableKillLogic for gen 9
  drm/i915: Use expcitly fixed type in compat32 structs
  drm/i915: Fix noatomic crtc disabling, v2.
  drm/i915: fill in more mode members
  drm/i915: Added BXT check in HAS_CORE_RING_FREQ macro
  ...

Update drm-misc pull request since the first one didn't go in yet. Few
atomic helper patches, rejecting some old dri1 crap for modern drivers and
a few trivial things on top.

* tag 'topic/drm-misc-2015-07-23' of git://anongit.freedesktop.org/drm-intel:
  drm/mgag200: remove unneeded variable
  drm/mgag200: remove unused variables
  drm/atomic: Only update crtc->x/y if it's part of the state, v2.
  drm/fb: drop panic handling
  drm: Fix warning with make xmldocs caused by drm_irq.c
  drm/gem: rip out drm vma accounting for gem mmaps
  drm/fourcc: Add formats R8, RG88, GR88
  drm/atomic: Cleanup on error properly in the atomic ioctl.
  drm: Update plane->fb also for page_flip
  drm: remove redundant code form drm_ioc32.c
  drm: reset empty state in transitional helpers
  drm/crtc-helper: Fixup error handling in drm_helper_crtc_mode_set
  drm/atomic: Update old_fb after setting a property.
  drm: Remove useless blank line
  drm: Reject DRI1 hw lock ioctl functions for kms drivers
  drm: Convert drm_legacy_ctxbitmap_init to void return type
  drm: Turn off Legacy Context Functions

- Add Carrizo support for amdkfd, using the new amdgpu driver as the relevant
  kgd. The support includes interfaces with amdgpu both for gfx7 (Kaveri) and
  gfx8 (Carrizo). However, gfx7 interface is used for debugging purposes only,
  so amdkfd defaults to using radeon when Kaveri is installed.

I would like to note that no new IOCTLs are being introduced, and there is no
change in the current IOCTLs, as they are suited both for gfx7 and gfx8.

* tag 'drm-amdkfd-next-2015-07-20' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: Set correct doorbell packet type for Carrizo
  drm/amdkfd: Use generic defines in new amd headers
  drm/amdkfd: Implement create_map_queues() for Carrizo
  drm/amdkfd: fix runlist length calculation
  drm/amdkfd: Add support for VI in DQM
  drm/amdkfd: add support for VI in MQD manager
  drm/amdkfd: add CP HWS packet headers for VI
  drm/amdkfd: add supported CZ devices PCI IDs to amdkfd
  drm/amdkfd: Add dependency of DRM_AMDGPU to Kconfig
  drm/amdgpu: Add amdgpu <--> amdkfd gfx8 interface
  drm/amdgpu: add amdgpu <--> amdkfd gfx7 interface
  drm/amdgpu: Add H/W agnostic amdgpu <--> amdkfd interface
  drm/radeon: Modify kgd_engine_type enum to match CZ

Two nice things here:
- drm_dev_register will truly register everything in the right order
  if the driver doesn't have a ->load callback. Before this we had to
  init the primary mode_group after the device nodes where already
  registered.

- Less things to keep track of when reworking the connector locking,
  yay!
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

It's been dead code since forever since mode groups haven't ever been
implemented. On top of that it's also been non-functional since we
only ever filtered the getresources ioctl and not any of the others
nor the mode object lookup code.

Given overwhelming evidence it looks like this isn't a feature we
need, hence remove it.
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Remaining manual work in the drm core&helpers. Nothing special here,
no surprises.
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

This function takes two locks, both of them the wrong ones. This
wasn't an oversight from my fb locking rework since both patches
landed in parallel. We really only need fb_lock when walking that
list, since everything we can reach from that is refcounted properly
already.

v2: Drop unused dev spotted by 0day.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Now that we also grab the connection_mutex and so fixed the race with
atomic modeset we can use the iterator there too.

The other special case is drm_connector_unplug_all which would have a
locking inversion with the sysfs store/show functions if we'd grab the
mode_config.mutex around the unplug. We could just grab
connection_mutex instead, but that's a bit too much a dirty trick for
my taste. Also it's only used by udl, which doesn't do any other kind
of connector hotplugging, so should be race-free. Hence just stick
with a comment for now.
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Now that dp mst hotplug takes all locks we can amend the locking rules
for the iterators. This is needed before we can roll these out in the
atomic code to avoid getting burried in WARNINGs.

v2: Rebase onto the extracted list locking assert and add a comment to
explain the rules.

v3: Fixup German->English translation fail in the comment.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Similar with the i915 take all modeset locks for mst hotplug. This is
needed to make sure radeon holds both mode_config.mutex and
mode_config.connection_mutex when updating the connector_list, which
is the new (interim) locking regime we want for that.
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

While auditing various users of the connector/encoder lists I realized
that the atomic code is a very prolific user of them. And it only ever
grabs the mode_config->connection_mutex, but not the
mode_config->mutex like all the other code walking encoder/connector
lists.

The problem is that we can't grab the mode_config.mutex late in atomic
code since that would lead to locking inversions. And we don't want to
grab it unconditionally like the legacy set_config modeset path since
that would render all the fine-grained locking moot.

Instead just grab more locks in the dp mst hotplug code. Note that
drm_connector_init (which is the one adding the connector to these
lists) already uses drm_modeset_lock_all.

The other reason for grabbing all locks is that the dpms off in the
unplug function amounts to a modeset, so better to take all required
locks for that.
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Ever since framebuffers are reference counted we have a special lock
for the global fb list. Make sure users of that list do hold that
lock when using the new iterators.
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Just so I have a user for this macro.

v2: Use the right macro - somehow I thought gcc should scream at me,
but list_for_each isn't really typesafe unfortunately. Spotted by
Ville.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Because of DP MST connectors can now be hotplugged and we must hold
the right lock when walking the connector lists.  Enforce this by
checking the locking in our shiny new list walking macros.

v2: Extract the locking check into a small static inline helper to
help readability. This will be more important when we make the
read list access rules more complicated in later patches. Inspired by
comments from Chris. Unfortunately, due to header loops around the
definition of struct drm_device the function interface is a bit funny.

v3: Encoders aren't hotadded/removed. For each dp mst encoder we
statically create one fake encoder per pipe so that we can support as
many mst sinks as the hw can (Dave).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

This is now truly only duct-tape to keep locking checks happy since
calling this function when hpd or polling are already enabled is a
bug. The fbdev helper can't cope with hotplug changes yet at this
point, only after that.

Otoh a bit more robustness in this function can't hurt, and with this
fbdev can actually cope with hotplug changes. And it's also more
consistent with the connector hotadd/remove dp mst needs to do.
Therefore document this as new official behavior.
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

So on first looks this seems superflous since drivers should ensure
correct ordering to not make this a problem. Otoh ordering constraints
between hdp, fbdev load and enabling polling are already tricky on
some hardware and it helps to be more robust.

But the real goal is to just shut up a locking WARN_ON I'd like to
add, which means init code gets some additional locks just for
uniformity.

v2: Also grab the lock for the public poll_enable, not just poll_init
which is used for resume, with the same justification.
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

And roll them out across drm_* files. The point here isn't code
prettification (it helps with that too) but that some of these lists
aren't static any more. And having macros will gives us a convenient
place to put locking checks into.

I didn't add an iterator for props since that's only used by a
list_for_each_entry_safe in the driver teardown code.

Search&replace was done with the below cocci spatch. Note that there's
a bunch more places that didn't match and which would need some manual
changes, but I've intentially left these out for this mostly automated
patch.

iterator name drm_for_each_crtc;
struct drm_crtc *crtc;
struct drm_device *dev;
expression head;
@@
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ drm_for_each_crtc (crtc, dev) {
...
}

@@
iterator name drm_for_each_encoder;
struct drm_encoder *encoder;
struct drm_device *dev;
expression head;
@@
- list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ drm_for_each_encoder (encoder, dev) {
...
}

@@
iterator name drm_for_each_fb;
struct drm_framebuffer *fb;
struct drm_device *dev;
expression head;
@@
- list_for_each_entry(fb, &dev->mode_config.fb_list, head) {
+ drm_for_each_fb (fb, dev) {
...
}

@@
iterator name drm_for_each_connector;
struct drm_connector *connector;
struct drm_device *dev;
expression head;
@@
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ drm_for_each_connector (connector, dev) {
...
}
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

No need to pass the planelist when everyone just uses
dev->mode_config.plane_list anyway.

I want to add a pile more of iterators with unified (obj, dev)
arguments. This is just prep.
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

This is needed as the CRC PMIC has support for Panel
enable/diable as gpio which needs 'gpiod_add_lookup_table'
and 'gpiod_remove_lookup_table' from gpiolib. This patch
can be squashed with below commit in topic/crc-pmic branch

    commit 61dd2ca2
    Author: Shobhit Kumar <shobhit.kumar@intel.com>
    Date:   Fri Jun 26 14:32:05 2015 +0530

    mfd: intel_soc_pmic_core: Add lookup table for Panel Control as GPIO
    signal

    On some Intel SoC platforms, the panel enable/disable signals
    are controlled by CRC PMIC. Add those control as a new GPIO in a
    lookup table for gpio-crystalcove chip during CRC driver load

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Use the CRC PWM device in intel_panel.c and add new MIPI backlight
specififc callbacks

v2: Modify to use pwm_config callback
v3: Addressed Jani's comments
    - Renamed all function as pwm_* instead of vlv_*
    - Call intel_panel_actually_set_backlight in enable function
    - Return -ENODEV in case pwm_get fails
    - in case pwm_config error return error cdoe from pwm_config
    - Cleanup pwm in intel_panel_destroy_backlight
v4: Removed unused #defines and initialized backlight with INVALID_PIPE (Ville)

CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The CRC (Crystal Cove) PMIC, controls the panel enable and disable
signals for BYT for dsi panels. This is indicated in the VBT fields. Use
that to initialize and use GPIO based control for these signals.

v2: Use the newer gpiod interface(Alexandre)
v3: Remove the redundant checks and unused code (Ville)
v4: Moved PWM vs SoC backlight #defines to intel_bios.h (Jani)

CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Tested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The Crystalcove PMIC provides three PWM signals and this driver exports
one of them on the BYT platform which is used to control backlight for
DSI panel. This is platform device implementation of the drivers/mfd
cell device for CRC PMIC.

CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Tested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NVarka Bhadram <varkabhadram@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On some BYT PLatform the PWM is controlled using CRC PMIC. Add a lookup
entry for the same to be used by the consumer (Intel GFX)

CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Tested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Needed for PWM control suuported by the PMIC

CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Tested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On some Intel SoC platforms, the panel enable/disable signals are
controlled by CRC PMIC. Add those control as a new GPIO in a lookup
table for gpio-crystalcove chip during CRC driver load

CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Tested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In case we unload and load a driver module again that is registering a
lookup table, without this it will result in multiple entries. Provide
an option to remove the lookup table on driver unload

Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Tested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NBen Goz <ben.goz@amd.com>
Reviewed-by: NYair Shachar <yair.shachar@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This patch makes use of the new amd headers (that are part of the new
amdgpu driver), instead of private defines.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Signed-off-by: NBen Goz <ben.goz@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

The MAP_QUEUES packet length for Carrizo is different than for Kaveri.
Therefore, we now need to calculate the runlist length with regard to the
underlying H/W.
Signed-off-by: NBen Goz <ben.goz@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This patch adds support for the VI APU in the DQM module.

Most of the functionality of DQM is shared between CI and VI. Therefore,
only a handful of functions are required to be in the
H/W-specific part of DQM.
Signed-off-by: NBen Goz <ben.goz@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This patch implements all the VI MQD manager functions.
This is done in a different file as the MQD format is different
between CI and VI
Signed-off-by: NBen Goz <ben.goz@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Signed-off-by: NBen Goz <ben.goz@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This patch adds the PCI IDs of supported CZ devices to the
supported_devices structure in amdkfd. That structure is used during the
amdkfd probing stage, to check if the currently probed device is eligible
to be handled by amdkfd.
Signed-off-by: NBen Goz <ben.goz@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This patch adds the gfx8 interface file between amdgpu and amdkfd. This
interface file is currently in use when running on a Carrizo-based
system.

The interface itself is represented by a pointer to struct
kfd_dev. The pointer is located inside amdgpu_device structure.

All the register accesses that amdkfd need are done using this
interface. This allows us to avoid direct register accesses in
amdkfd proper, while also allows us to avoid locking between
amdkfd and amdgpu.

The single exception is the doorbells that are used in both of
the drivers. However, because they are located in separate pci
bar pages, the danger of sharing registers between the drivers
is minimal.

Having said that, we are planning to move the doorbells as well
to amdgpu.
Signed-off-by: NBen Goz <ben.goz@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>