- 24 10月, 2007 2 次提交
-
-
由 Alan Cox 提交于
Did a complete audit of these and found we have another error case. ata_bus_softreset calls ata_check_status which means that it tries to do an ioread8 on the port blindly and check versus 0xFF for an error. It should of course be using the ap->ops method for this via chk_status, and this bug causes a wrog status call on the NS87415 at least. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 23 10月, 2007 1 次提交
-
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 20 10月, 2007 6 次提交
-
-
由 Jeff Garzik 提交于
sata_sis has the same restrictions as other SFF controllers, and so must use LIBATA_MAX_PRD to denote that SCSI may only fill ATA_MAX_PRD/2 entries, due to our need to handle IOMMU merging. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
* Fix out-of-bound array access for MWDMA modes. * Bump driver version. Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
SCR read for controllers which uses PCI configuration space for SCR access got broken while adding @val argument to SCR accessors. Fix it. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Randy Dunlap 提交于
Fix libata kernel-doc parameter name. Warning(linux-2.6.23-git13//drivers/ata/libata-core.c:1415): No description found for parameter 'sgl' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Adrian Bunk 提交于
Spotted by David Miller <davem@davemloft.net>. Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Robert P. J. Day 提交于
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
- 19 10月, 2007 2 次提交
-
-
由 Stephen Hemminger 提交于
Get rid of sparse related warnings from places that use integer as NULL pointer. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Cc: Andi Kleen <ak@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Ian Kent <raven@themaw.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Garzik 提交于
Short term, this works around a bug introduced by early sg-chaining work. Long term, removing this function eliminates a branch from a hot path loop in each scatter/gather table build. Also, as this code demonstrates, we don't need to _track_ the end of the s/g list, as long as we mark it in some way. And doing so programatically is nice. So its a useful cleanup, regardless of its short term effects. Based conceptually on a quick patch by Jens Axboe. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 18 10月, 2007 4 次提交
-
-
由 Sonic Zhang 提交于
Changes: 1. Remove irq_ack() and port_disable() methods 2. Acocomodate for the libata-link patches 3. Change Kconfig ATAPI mode option into a module param. 4. Add supported WMDMA mode. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
ata_check_status() does an SFF compliant check ata_chk_status() does a generic call to ap->ops->check_status (usually ata_check_status) libata-sff uses the wrong one. Hardly suprising given the naming here, which ought to get fixed to ata_sff_check_status() perhaps ? Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Li Yang 提交于
This patch adds support for Freescale 3.0Gbps SATA Controller supporting Native Command Queueing(NCQ), device hotplug, and ATAPI. This controller can be found on MPC8315 and MPC8378. Signed-off-by: NAshish Kalra <ashish.kalra@freescale.com> Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
There are configurations where CONFIG_ACPI but !CONFIG_PM. In this case, pata_acpi can be selected but won't build. Fix it. Reported by Avuton Olrich. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Avuton Olrich <avuton@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 16 10月, 2007 13 次提交
-
-
由 FUJITA Tomonori 提交于
LIBATA_MAX_PRD is the maximum number of DMA scatter/gather elements permitted by the HBA's DMA engine. It's properly set to q->max_hw_segments via the sg_tablesize parameter. libata shouldn't call blk_queue_max_phys_segments. Now LIBATA_MAX_PRD is equal to SCSI_MAX_PHYS_SEGMENTS by default (both is 128), so everything is fine. But if they are changed, some code (like the scsi mid layer, sg chaining, etc) might not work properly. (Addition from Jens) The basic issue is that the physical segment setting is purely a driver issue. And since SCSI is managing the sglist, libata has no business changing the setting. All libata should care about is the hw segment setting. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 FUJITA Tomonori 提交于
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
This converts libata to using the sg helpers for looking up sg elements, instead of doing it manually. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Randy Dunlap 提交于
Fix libata docbook warnings. Warning(linux-2.6.23-git8//drivers/ata/libata-scsi.c:3251): No description found for parameter 'dev' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Garzik 提交于
This driver was using hooks that were very recently removed. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Kristoffer Ericson 提交于
Signed-off-by: NKristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Andrew Paprocki 提交于
The strn_pattern_cmp routine does not handle a blank name parameter properly. The only patterns which should match a blank name are "*" and an explicit "". If the function is passed a blank name in current code, it will always match against the patt parameter. The bug manifests itself as the device with the empty model name always matching the first device in the DMA blacklist, forcing it to revert to PIO mode. Signed-off-by: NAndrew Paprocki <andrew@ishiboo.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jason Gaston 提交于
This patch adds a port map for ICH9 and ICH8 SATA controllers that have only 2 ports available in that mode. Signed-off-by: NJason Gaston <jason.d.gaston@intel.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Martin K. Petersen 提交于
This is a driver for the ATA controller on the Geode CS5536 companion chip. The PCI device ID for this device was previously claimed by pata_amd.c but the PIO timings were not correct. This driver also works around a bug in some BIOSes that handle unaligned access to the PCI config registers poorly. Finally, the driver allows fallback to using MSR registers for configuration on BIOSes that are truly broken. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
ST9160821AS / 3.CCD does spurious completions too. Blacklist it. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
After commands which can change device configuration, EH is scheduled to revalidate and reconfigure the device. Host link was incorrectly used unconditionally when scheduling EH action. This resulted in bogus revalidation request and mismatched configuration between device and driver. Fix it. This bug was reported by Igor Durdanovic. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Igor Durdanovic <idurdanovic@comcast.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Kuan Luo 提交于
Add the Software NCQ support to sata_nv.c for MCP51/MCP55/MCP61 SATA controller. NCQ function is disable by default, you can enable it with 'swncq=1'. NCQ will be turned off if the drive is Maxtor on MCP51 or MCP55 rev 0xa2 platform. [akpm@linux-foundation.org: build fix] Signed-off-by: NKuan Luo <kluo@nvidia.com> Signed-off-by: NPeer Chen <pchen@nvidia.com> Cc: Zoltan Boszormenyi <zboszor@dunaweb.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Benjamin Herrenschmidt 提交于
This patch adds MMIO support to the pata_sil680 for taskfile IOs, based on what the old siimage does. I haven't bothered changing the chip setup stuff from PCI config cycles to MMIO though (siimage does it), I don't think it matters, I've only adapted it to use MMIO for taskfile accesses. I've tested it on a Cell blade and it seems to work fine. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 15 10月, 2007 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 10月, 2007 1 次提交
-
-
由 Grant Likely 提交于
Trivial unused variable fix Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 10月, 2007 10 次提交
-
-
由 Jeff Garzik 提交于
* remove pointless pci_dev_to_dev() wrapper. Just directly reference the embedded struct device like everyone else does. * pata_cs5520: delete cs5520_remove_one(), it was a duplicate of ata_pci_remove_one() * linux/libata.h: don't bother including linux/pci.h, we don't need it. Simply declare 'struct pci_dev' and assume interested parties will include the header, as they should be doing anyway. * linux/libata.h: consolidate all CONFIG_PCI declarations into a single location in the header. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tejun Heo 提交于
PMP registers used to be accessed with dedicated accessors ->pmp_read and ->pmp_write. During reset, those callbacks are called with the port frozen so they should be able to run without depending on interrupt delivery. To achieve this, they were implemented polling. However, as resetting the host port makes the PMP to isolate fan-out ports until SError.X is cleared, resetting fan-out ports while port is frozen doesn't buy much additional safety. This patch updates libata PMP support such that PMP registers are accessed using regular ata_exec_internal() mechanism and kills ->pmp_read/write() callbacks. The following changes are made. * PMP access helpers - sata_pmp_read_init_tf(), sata_pmp_read_val(), sata_pmp_write_init_tf() are folded into sata_pmp_read/write() which are now standalone PMP register access functions. * sata_pmp_read/write() returns err_mask instead of rc. This is consistent with other functions which issue internal commands and allows more detailed error reporting. * ahci interrupt handler is modified to ignore BAD_PMP and spurious/illegal completion IRQs while reset is in progress. These conditions are expected during reset. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Implement ATA_PFLAG_RESETTING. This flag is set while reset is in progress. It's set before prereset is called and cleared after reset fails or postreset is finished. This flag itself doesn't have any function. It will be used by LLDs to tell whether reset is in progress if it needs to behave differently during reset. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Add @timeout argument to ata_exec_internal[_sg](). If 0, default timeout ata_probe_timeout is used. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Asynchronous notification on ICH9 didn't work because it didn't write AN FIS into the RX area - it only updates SNotification. Also, snooping SDB_FIS RX area is racy against further SDB FIS receptions. Let sata_async_notification() determine using SNTF if it's available and snoop RX area iff SNTF isn't available Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Now that we have pp->intr_mask, move PORT_IRQ_BAD_PMP enabling to ahci_pmp_attach/detach() where it belongs. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
ahci had problems with NCQ over PMP and NCQ used to be disabled while PMP was attached. After fixing the problem, the temporary NCQ disabling code wasn't removed completely. Kill the remaining piece. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Tasks in uninterruptible sleep might be woken up by unrelated events and should check whether the condition it was waiting for has actually triggered. Wrap schedule_timeout_uninterruptible() in loop to achieve it. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
ATA_EHI_NO_AUTOPSY and ATA_EHI_QUIET are used during initial probing to skip exception analysis and reporting. Usually, there's nothing to report but on some allowed but rare corner cases (e.g. phy status changed interrupt when IRQ is enabled on frozen port - this happens if IRQ pending status isn't cleared in the IRQ router or controller) exception messages get printed. Skip reporting if ATA_EHI_QUIET is set. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
ehi description field is used to carry LLD specific controller description. Sometimes, it's used without clearing before and LLD description gets printed with exception information one more time. Clear after printing. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-