DRM_CONNECTOR_POLL_CONNECT only enables polling for connections, not
disconnections. Because of this, we end up losing hotplug polling for
analog connectors once they get connected.

Easy way to reproduce:
 - Grab a machine with a radeon GPU and a VGA port
 - Plug a monitor into the VGA port, wait for it to update the connector
   from disconnected to connected
 - Disconnect the monitor on VGA, a hotplug event is never sent for the
   removal of the connector.

Originally, only using DRM_CONNECTOR_POLL_CONNECT might have been a good
idea since doing VGA polling can sometimes result in having to mess with
the DAC voltages to figure out whether or not there's actually something
there since VGA doesn't have HPD. Doing this would have the potential of
showing visible artifacts on the screen every time we ran a poll while a
VGA display was connected. Luckily, radeon_vga_detect() only resorts to
this sort of polling if the poll is forced, and DRM's polling helper
doesn't force it's polls.

Additionally, this removes some assignments to connector->polled that
weren't actually doing anything.

Cc: stable@vger.kernel.org
Signed-off-by: NLyude <cpaul@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

V2: Add wait_for_mc_idle after stopping fb access
V3:
	1. Remove resume fb access since there is no need to
   	do that for gpu reset.
	2. Move stop fb access to amdgpu_gpu_reset function,
	since it's the same for all asics.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com> (V1)
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In commit 195567e9,
use true/false instead of 1/0 to fix build warning.
But the original logic: '0' means true and '1' means false.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

A regular spin_lock/unlock should do here as well.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Record the gpu reset count in vmid to identify if gpu reset happened.
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Record the gpu reset count in vmid to identify if gpu reset happened.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We want to keep the newest fence, not the oldest one.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This flag was being set unconditionally at runtime so just set it at
compile time instead.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NFrank Binns <frank.binns@imgtec.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If reservation_object_get_fences_rcu failed, we'd previously go directly
to the cleanup label, so we'd leave the BO pinned.

While we're at it, remove two amdgpu_bo_unreserve calls in favour of two
new labels.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixed mc stop and resume hardware programming sequence.
Signed-off-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Skip IP blocks that are not enabled.
Reviewed-by: NChunming zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Saves a few CPU cycles.
Reviewed-by: NChunming zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Helpers to to call the IP functions for the selected IP.
Reviewed-by: NChunming zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Not enabled yet, but missing the call.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use UPDATE_IMMEDIATE (update on next data request boundary) rather
than UPDATE_H_RETRACE (update on next line boundary).  The data
request boundary is less than a scanline, so it update will happen
sooner.

Cc: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Now that we can pipeline evictions we need to wait for
them to finish when we cleanup a memory domain.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's just overhead to do so and allocating a VMID
when we don't need one is actually a bit dangerous.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Flush and invalidate the HDP caches.

v2: fix typo in comment
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch changes pcie_gen_cap magic code to macro to make it more
readable.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Cc: Eric Huang <JinHuiEric.Huang@amd.com>
Cc: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Not used outside of gfx7.
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

gfx8 already uses them.  Remove the direct exports and
use the callbacks fpr gfx7.
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's gfx IP specific, not asic specific, so move to a
gfx callback.
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's gfx IP specific, not asic specific, so move to a
gfx callback.
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Only used in the gmc IP modules so just call the local
function directly.
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These are not used outside of the respective gmc ip modules.
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We don't need to validate them again if the eviction counter didn't changed.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Keep track of the number of evictions since boot.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

irq need to update when gpu reset happens.
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch is a port of similar patch for amdgpu
when PP is disabled. Since the code flow is little
different when PP is enabled, we need to make sure
the patch is applied for PP enabled path as well.

With the current code, when we boot with the amdgpu
driver enabled and loaded, the VCE also automatically
remains enabled since bootup. This can be verified from
the output of amdgpu_pm_info. It does not matter whether
we boot into command line directly or into X, the VCE
stays enabled the entire time.

This patch addresses the issue and makes sure that
VCE is turned on only during playback, and remains
disabled otherwise.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NArindam Nath <arindam.nath@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With the current code, when we boot with the amdgpu
driver enabled and loaded, the VCE also automatically
remains enabled since bootup. This can be verified from
the output of amdgpu_pm_info. It does not matter whether
we boot into command line directly or into X, the VCE
stays enabled the entire time.

This patch addresses the issue and makes sure that
VCE is turned on only during playback, and remains
disaled otherwise.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NArindam Nath <arindam.nath@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No need to stall the pipe when we are using firmware with the
fix.
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: do not overwrite register when bitmap is zero
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: do not overwrite register when bitmap is zero
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This parameter will allow disabling individual CUs on module load, e.g.
amdgpu.disable_cu=2.0.3,2.0.4 to disable CUs 3 and 4 of SE2.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>