Support the new memory registration API by allocating a
private page list array in iwch_mr and populate it when
iwch_map_mr_sg is invoked. Also, support IB_WR_REG_MR
by duplicating build_fastreg just take the needed information
from different places:
- page_size, iova, length (ib_mr)
- page array (iwch_mr)
- key, access flags (ib_reg_wr)

The IB_WR_FAST_REG_MR handlers will be removed later when
all the ULPs will be converted.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Support the new memory registration API by allocating a
private page list array in ocrdma_mr and populate it when
ocrdma_map_mr_sg is invoked. Also, support IB_WR_REG_MR
by duplicating IB_WR_FAST_REG_MR, but take the needed
information from different places:
- page_size, iova, length, access flags (ib_mr)
- page array (ocrdma_mr)
- key (ib_reg_wr)

The IB_WR_FAST_REG_MR handlers will be removed later when
all the ULPs will be converted.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Support the new memory registration API by allocating a
private page list array in mlx4_ib_mr and populate it when
mlx4_ib_map_mr_sg is invoked. Also, support IB_WR_REG_MR
by setting the exact WQE as IB_WR_FAST_REG_MR, just take the
needed information from different places:
- page_size, iova, length, access flags (ib_mr)
- page array (mlx4_ib_mr)
- key (ib_reg_wr)

The IB_WR_FAST_REG_MR handlers will be removed later when
all the ULPs will be converted.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Tested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Support the new memory registration API by allocating a
private page list array in mlx5_ib_mr and populate it when
mlx5_ib_map_mr_sg is invoked. Also, support IB_WR_REG_MR
by setting the exact WQE as IB_WR_FAST_REG_MR, just take the
needed information from different places:
- page_size, iova, length, access flags (ib_mr)
- page array (mlx5_ib_mr)
- key (ib_reg_wr)

The IB_WR_FAST_REG_MR handlers will be removed later when
all the ULPs will be converted.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Just function declarations - no need for those
laying arround. If for some reason someone will want
FMR support in mlx5, it should be easy enough to restore
a few structs.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The new fast registration  verb ib_map_mr_sg receives a scatterlist
and converts it to a page list under the verbs API thus hiding
the specific HW mapping details away from the consumer.

The provider drivers are provided with a generic helper ib_sg_to_pages
that converts a scatterlist into a vector of page addresses. The
drivers can still perform any HW specific page address setting
by passing a set_page function pointer which will be invoked for
each page address. This allows drivers to avoid keeping a shadow
page vectors and convert them to HW specific translations by doing
extra copies.

This API will allow ULPs to remove the duplicated code of constructing
a page vector from a given sg list.

The send work request ib_reg_wr also shrinks as it will contain only
mr, key and access flags in addition.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Tested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NDoug Ledford <dledford@redhat.com>

Conflicts:
	drivers/infiniband/ulp/isert/ib_isert.c - Commit 4366b19c
	(iser-target: Change the recv buffers posting logic) changed the
	logic in isert_put_datain() and had to be hand merged

Add support for network namespaces from user space. This is done by passing
the network namespace of the process instead of init_net.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NYotam Kenneth <yotamke@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Signed-off-by: NGuy Shapiro <guysh@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support for network namespaces in the ib_cma module. This is
accomplished by:

1. Adding network namespace parameter for rdma_create_id. This parameter is
   used to populate the network namespace field in rdma_id_private.
   rdma_create_id keeps a reference on the network namespace.
2. Using the network namespace from the rdma_id instead of init_net inside
   of ib_cma, when listening on an ID and when looking for an ID for an
   incoming request.
3. Decrementing the reference count for the appropriate network namespace
   when calling rdma_destroy_id.

In order to preserve the current behavior init_net is passed when calling
from other modules.
Signed-off-by: NGuy Shapiro <guysh@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NYotam Kenneth <yotamke@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Keep a struct for each network namespace containing the IDRs for the RDMA
CM port spaces. The struct is created dynamically using the generic_net
mechanism.

This patch is internal infrastructure work for the following patches. In
this patch, init_net is statically used as the network namespace for
the new port-space API.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NYotam Kenneth <yotamke@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Signed-off-by: NGuy Shapiro <guysh@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add network namespace support to the ib_addr module. For that, all the
address resolution and matching should be done using the appropriate
namespace instead of init_net.

This is achieved by:

1. Adding an explicit network namespace argument to exported function that
   require a namespace.
2. Saving the namespace in the rdma_addr_client structure.
3. Using it when calling networking functions.

In order to preserve the behavior of calling modules, &init_net is
passed as the parameter in calls from other modules. This is modified as
namespace support is added on more levels.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NYotam Kenneth <yotamke@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Signed-off-by: NGuy Shapiro <guysh@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

iser is perfectly capable supporting SG clustering as it translates
the SG list to a page vector. Enabling SG clustering can dramatically
reduce the number of SG elements, which doesn't make much of a difference
at this point, but with arbitrary SG list support, reducing the
number of SG elements can benefit greatly as as it would reduce
the length of the HW descriptors array.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The block layer can reliably guarantee that SG lists won't
contain gaps (page unaligned) if a driver set the queue
virt_boundary.

With this setting the block layer will:
- refuse merges if bios are not aligned to the virtual boundary
- split bios/requests that are not aligned to the virtual boundary
- or, bounce buffer SG_IOs that are not aligned to the virtual boundary

Since iser is working in 4K page size, set the virt_boundary to
4K pages. With this setting, we can now safely remove the bounce
buffering logic in iser.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Detected this by compiling with W=1.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Detected this by compiling with W=1.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The GID cache accompanies every GID with attributes.
The GID attributes link the GID with its netdevice, which could be
resolved to smac and vlan id easily. Since we've added the netdevice
(ifindex and net) to the path record, storing the L2 attributes is
duplicated data and hence these attributes are removed.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Smac and vlan id could be resolved from the GID attribute, and thus
these attributes aren't needed anymore. Removing them.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The cm and cma don't need to explicitly handle vlan and smac,
as they are resolved from the GID index now. Removing this
portion of code.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Previously, vlan id and source MAC were used from QP attributes. Since
the net device is now stored in the GID attributes, they could be used
instead of getting this information from the QP attributes.

IB_QP_SMAC, IB_QP_ALT_SMAC, IB_QP_VID and IB_QP_ALT_VID were removed
because there is no known libibverbs that uses them.

This commit also modifies the vendors (mlx4, ocrdma) drivers in order
to use the new approach.

ocrdma driver changes were done by Somnath Kotur <Somnath.Kotur@Avagotech.Com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

GID cache API users might want to search for GIDs with specific
attributes rather than just specifying GID, net device and port.
This is used in a later patch, where we find the sgid index by
L2 Ethernet attributes.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Previously, cma_validate_port searched for GIDs in IB cache and then
tried to verify the found port. This could fail when there are
identical GIDs on both ports. In addition, netdevice should be taken
into account when searching the GID table.
Fixing cma_validate_port to search only the relevant port's cache
and netdevice.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Previously, the CM has searched the cache for any sgid_index whose
GID matches the path's GID. Since the path record stores the net
device, the CM should now search only for GIDs which originated from
this net device.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In order to find the sgid_index, one could just query the IB cache
with the correct GID and netdevice. Therefore, instead of storing
the L2 attributes directly in the path, we only store the
ifindex and net and use them later to get the sgid_index.
The vlan_id and smac L2 attributes are removed in a later patch.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Sometime consumers might want to search for a GID in a specific port.
For example, when a WC arrives and we want to search the GID
that matches that port - it's better to search only the relevant
port.
Exposing and renaming ib_cache_gid_find_by_port in order to match
the naming convention of the module.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Adding an ability to query the IB cache by a netdev and get the
attributes of a GID. These parameters are necessary in order to
successfully resolve the required GID (when the netdevice is known)
and get the Ethernet L2 attributes from a GID.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK is now supported downstream.

In addition, this flag was supported only for IB_QPT_UD, now, with the
new implementation it is supported for all QP types.

Support IB_USER_VERBS_EX_CMD_CREATE_QP in order to get the flag from
user space using the extension create qp command.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Current implementation for MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK is not
supported when link layer is Ethernet.

This patch will add counter based implementation for multicast loopback
prevention. HW can drop multicast loopback packets if sender QP counter
index is equal to receiver QP counter index. If qp flag
MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK is set and link layer is Ethernet,
create a new counter and attach it to the QP so it will continue
receiving multicast loopback traffic but it's own.

The decision if to create a new counter is being made at the qp
modification to RTR after the QP's port is set. When QP is destroyed or
moved back to reset state, delete the counter.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This is an infrastructure step for allocating and attaching more than
one counter to QPs on the same port. Allocate a counters table and
manage the insertion and removals of the counters in load and unload of
mlx4 IB.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Set the mcast loopback prevention bit in the QPC for ETH MLX QPs (not
RSS QPs), when the firmware supports this feature. In addition, all rx
ring QPs need to be updated in order not to enforce loopback checks.
This prevents getting packets we sent both from the network stack and
the HCA. Loopback prevention is done by comparing the counter indices of
the sent and receiving QPs. If they're equal, packets aren't
loopback-ed.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Update device capabilities regarding HW filtering multicast loopback support.

Add MLX4_UPDATE_QP_ETH_SRC_CHECK_MC_LB attribute to mlx4_update_qp to
enable changing QP context to support filtering incoming multicast
loopback traffic according the sender's counter index.

Set the corresponding bits in QP context to force the loopback source
checks if attribute is given and HW supports it.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Allow setting IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK at create_flags in
ib_uverbs_create_qp_ex.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

ib_uverbs_ex_create_qp follows the extension verbs
mechanism. New features (for example, QP creation flags
field which is added in a downstream patch) could used
via user-space libraries without breaking the ABI.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Updating the version number to 11.0.0.0
Signed-off-by: NSelvin Xavier <selvin.xavier@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Changing CQ-Doorbell(DB) logic to prevent DB floods, it is supposed to be
pressed only if any hw CQE is polled. If cq-arm was requested
previously then don't bother about number of hw CQEs polled and
arm the CQ.
Signed-off-by: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Some versions of the FW sends wrong QP or CQ IDs in the
Async CQE. Adding a check to see whether qp or cq structures
associated with the CQE is valid.
Signed-off-by: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

debugfs_remove should be called before freeing the driver
stats resources to avoid any crash during ocrdma_remove.
Signed-off-by: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

ocrdma_dev_list is not used by the driver. So removing
the references of this variable. dev->rcu was introduced
for the ipv6 notifier for GID management. This is no longer
required as the GID management is outside the HW driver.
Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@avagotech.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>