Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Customize the SEC interrupt priority array in machine ints-priority.c.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Turn SEC related macro CONFIG_BF60x into SEC_GCTL.
Move machine specific GPIO_PINT macros to machine gpio header.
Split SEC init_arch_irq() and vec_to_irq() from old SIC.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

It's the same for both bf5xx and bf6xx soc.
Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Add capabilities in adv7183_inputs to indicate that S_STD is supported.
Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

PPI driver has changed blank units from clocks to pixels.
Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Musb can't work since the marco name has been changed.
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Add pint suspend and resume if defined BFIN_GPIO_PINT.
Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

save and restore pint sec CTL
save and restore pint registers
add pint suspend and resume when suspend to mem
Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Pass wake up source mask and wakeup source polarity to deepsleep and
hibernate.
Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Set .probe_type = "map_rom" for norflash so that xip_test can run
correctly.
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Otherwise, the compiler may optimize assemble code into 8bit access instruction
when target register is 8 bit width.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Add irq_set_wake to bfin_sec_irqchip, drivers like stmmac need it.
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Add add deepsleep for bf60x.
1. Call DMC init functions to enter and exit DDR self refresh mode.
2. Wait till CGU PLL is locked after wake up and exit DDR self refresh mode.
3. Make asessembly function enter_deepsleep comply with C funtion ABI in
order to call other C functions.
4. Switch kernel stack by register EX_SCRATCH_REG.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

ROM range of bf60x is above 0xb0000000.
Signed-off-by: NBob Liu <lliubbo@gmail.com>

So that user can set the clocks through menuconfig.
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Otherwise, chained sg list may be missed.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

We need larger DMA region to support HD video.
Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

Extend chip select number supported by spi master as well
because we can accept SPISEL1-SPISEL7 and all GPIO.
Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

The SYSTEM_SUSPEND_DISK system state is never used, so drop it.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge emailed kgdb dmesg fixups patches from Anton Vorontsov:
 "The dmesg command appears to be broken after the printk rework.  The
  old logic in the kdb code makes no sense in terms of current
  printk/logging storage format, and KDB simply hangs forever upon
  entering 'dmesg' command.

  The first patch revives the command by switching to kmsg_dumper
  iterator.  As a side-effect, the code is now much more simpler.

  A few changes were needed in the printk.c: we needed unlocked variant
  of the kmsg_dumper iterator, but these can surely wait for 3.6.

  It's probably too late even for the first patch to go to 3.5, but I'll
  try to convince otherwise.  :-) Here we go:

   - The current code is broken for sure, and has no hope to work at
     all.  It is a regression
   - The new code works for me, and probably works for everyone else;
   - If it compiles (and I urge everyone to compile-test it on your
     setup), it hardly can make things worse."

* Merge emailed patches from Anton Vorontsov: (4 commits)
  kdb: Switch to nolock variants of kmsg_dump functions
  printk: Implement some unlocked kmsg_dump functions
  printk: Remove kdb_syslog_data
  kdb: Revive dmesg command