This patch add support for s3c2410/s3c2416/s3c2440/s3c2443 ADC. The s3c24xx
is alomost same as ADCv1. But, There are a little difference as following:
- ADCMUX register address
- ADCDAT mask (10 bit or 12 bit ADC resolution according to SoC version)
- s3c24xx/s3c64xx has not included ADC_PHY enable register
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The ADC in s3c64xx is almost the same as exynosv1, but
has a different 'select' method. Adding this here will be
helpful to move over the existing s3c64xx platform from the
legacy plat-samsung/adc driver to the new exynos-adc.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The ADC is a 3-channel signal-ended 10-bit Successive Approximation
Register (SAR) A/D Converter. It uses the supply and ground as its reference
and converts the analog input signal into 10-bit binary digital codes.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch introduces the use of devm_iio_device_register and does away
with the unregister in the remove function.
Signed-off-by: NHimangi Saraogi <himangi774@gmail.com>
Acked-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch introduces the use of devm_iio_device_register and does away
with the unregister in the remove function. The remove function is no
longer required and is completely removed.
Signed-off-by: NHimangi Saraogi <himangi774@gmail.com>
Acked-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch adds support for ADC128S052 from TI.
Signed-off-by: NAngelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Added any-motion trigger documentation.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This change implements BMC150 accelerometer driver. A BMC150 package
consist of a compass and an accelerometer. This driver only implements
accelerometer part.
Spec downloaded from:
http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-03.pdf

This sensor chip supports many advanced features, but this driver
implements minimum feature set which is a must to be useful.
This driver can be enhanced incrementally.
If the sensor vendor wants to update full featured version, they
can substitute or enhance this driver when they get chance.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This chip can support 3 different ranges. Allowing range specification.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

In an effort to improve raw read performance and at the same time enter
low power state at every possible chance.
For raw reads, it will keep the system powered on for a default or user
specified time, via autosuspend_delay attribute of device power.
This will help read multiple samples without power on/off sequence.
For triggers it will keep the system on till, requested to be turned
off by trigger state by utilizing run time PM usage counters.

When runtime pm is not enabled, then it keeps the chip in operation
mode always.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch fixes a warning from checkpatch.pl script :
"WARNING: Missing a blank line after declarations"
Signed-off-by: NOussama Jabbari <oussama.jabbari@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Convert a zero return value on error to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch adds missing blank lines between declarations and code and
fixes lines starting by spaces, satisfying checkpatch.pl.
Signed-off-by: NMurilo Opsfelder Araujo <mopsfelder@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NMurilo Opsfelder Araujo <mopsfelder@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Silence the following sparse warnings by changing cast from u16 to
__be16:

  CHECK   drivers/staging/iio/accel/adis16240_core.c
drivers/staging/iio/accel/adis16240_core.c:128:51: warning: incorrect
type in argument 3 (different signedness)
drivers/staging/iio/accel/adis16240_core.c:128:51:    expected unsigned
short [usertype] *val
drivers/staging/iio/accel/adis16240_core.c:128:51:    got signed short
*<noident>
drivers/staging/iio/accel/adis16240_core.c:142:51: warning: incorrect
type in argument 3 (different signedness)
drivers/staging/iio/accel/adis16240_core.c:142:51:    expected unsigned
short [usertype] *val
drivers/staging/iio/accel/adis16240_core.c:142:51:    got signed short
*<noident>
Signed-off-by: NTeodora Baluta <teodora.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Fix the following sparse warning:

drivers/staging/iio/light/isl29018.c:508:50: warning: incorrect type in
argument 3 (different signedness)
drivers/staging/iio/light/isl29018.c:508:50:    expected unsigned int
*conf_adc_bit
drivers/staging/iio/light/isl29018.c:508:50:    got int *<noident>
Signed-off-by: NTeodora Baluta <teodora.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Fix the following sparse warnings:

 CHECK   drivers/staging/iio/magnetometer/hmc5843_core.c
drivers/staging/iio/magnetometer/hmc5843_core.c:138:70: warning:
incorrect type in argument 3 (different signedness)
drivers/staging/iio/magnetometer/hmc5843_core.c:138:70:    expected
unsigned int *val
drivers/staging/iio/magnetometer/hmc5843_core.c:138:70:    got int
*<noident>
drivers/staging/iio/magnetometer/hmc5843_core.c:215:64: warning:
incorrect type in argument 3 (different signedness)
drivers/staging/iio/magnetometer/hmc5843_core.c:215:64:    expected
unsigned int *val
drivers/staging/iio/magnetometer/hmc5843_core.c:215:64:    got int
*<noident>
drivers/staging/iio/magnetometer/hmc5843_core.c:354:72: warning:
incorrect type in argument 3 (different signedness)
drivers/staging/iio/magnetometer/hmc5843_core.c:354:72:    expected
unsigned int *val
drivers/staging/iio/magnetometer/hmc5843_core.c:354:72:    got int
*<noident>
drivers/staging/iio/magnetometer/hmc5843_core.c:362:72: warning:
incorrect type in argument 3 (different signedness)
drivers/staging/iio/magnetometer/hmc5843_core.c:362:72:    expected
unsigned int *val
drivers/staging/iio/magnetometer/hmc5843_core.c:362:72:    got int
*<noident>
Signed-off-by: NTeodora Baluta <teodora.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

When copying multiple multiple samples that are adjacent in both the source as
well as the destination buffer, instead of creating a new demux table entry for
each sample just increase the length of the previous entry by the size of the
new sample. This makes the demuxing process slightly more efficient.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Makes the code slightly shorter and a bit easier to understand.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Fix the following sparse warnings:

  CHECK   drivers/staging/iio/impedance-analyzer/ad5933.c
drivers/staging/iio/impedance-analyzer/ad5933.c:241:17: warning:
incorrect type in assignment (different base types)
drivers/staging/iio/impedance-analyzer/ad5933.c:241:17:    expected
unsigned int [unsigned] [usertype] d32
drivers/staging/iio/impedance-analyzer/ad5933.c:241:17:    got
restricted __be32 [usertype] <noident>
drivers/staging/iio/impedance-analyzer/ad5933.c:263:13: warning:
incorrect type in assignment (different base types)
drivers/staging/iio/impedance-analyzer/ad5933.c:263:13:    expected
unsigned short [unsigned] dat
drivers/staging/iio/impedance-analyzer/ad5933.c:263:13:    got
restricted __be16 [usertype] <noident>
drivers/staging/iio/impedance-analyzer/ad5933.c:271:13: warning:
incorrect type in assignment (different base types)
drivers/staging/iio/impedance-analyzer/ad5933.c:271:13:    expected
unsigned short [unsigned] [addressable] dat
drivers/staging/iio/impedance-analyzer/ad5933.c:271:13:    got
restricted __be16 [usertype] <noident>
drivers/staging/iio/impedance-analyzer/ad5933.c:310:19: warning: cast to
restricted __be32
drivers/staging/iio/impedance-analyzer/ad5933.c:310:19: warning: cast to
restricted __be32
drivers/staging/iio/impedance-analyzer/ad5933.c:310:19: warning: cast to
restricted __be32
drivers/staging/iio/impedance-analyzer/ad5933.c:310:19: warning: cast to
restricted __be32
drivers/staging/iio/impedance-analyzer/ad5933.c:310:19: warning: cast to
restricted __be32
drivers/staging/iio/impedance-analyzer/ad5933.c:310:19: warning: cast to
restricted __be32
drivers/staging/iio/impedance-analyzer/ad5933.c:446:21: warning:
incorrect type in assignment (different base types)
drivers/staging/iio/impedance-analyzer/ad5933.c:446:21:    expected
unsigned short [unsigned] dat
drivers/staging/iio/impedance-analyzer/ad5933.c:446:21:    got
restricted __be16 [usertype] <noident>
drivers/staging/iio/impedance-analyzer/ad5933.c:454:21: warning:
incorrect type in assignment (different base types)
drivers/staging/iio/impedance-analyzer/ad5933.c:454:21:    expected
unsigned short [unsigned] [addressable] dat
drivers/staging/iio/impedance-analyzer/ad5933.c:454:21:    got
restricted __be16 [usertype] <noident>
drivers/staging/iio/impedance-analyzer/ad5933.c:548:23: warning: cast to
restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:548:23: warning: cast to
restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:548:23: warning: cast to
restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:548:23: warning: cast to
restricted __be16
Signed-off-by: NTeodora Baluta <teodora.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NPhilippe Reynes <tremyfr@yahoo.fr>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Fix build warning, sizeof() called on dynamically
sized pointer, by removing the call and the dependent
function parameter. It is not needed or used in this
driver, when pushing values to an iio buffer.

Changes from v1
- Fix mistake in varible name
Signed-off-by: NReyad Attiyat <reyad.attiyat@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch fixes the following checkpatch.pl issues in gdm_usb.c:
ERROR: that open brace { should be on the previous line
Signed-off-by: NCihangir Akturk <cakturk@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix sparse warnings:
drivers/staging/rtl8188eu/core/rtw_cmd.c:52:5: warning:
  symbol '_rtw_enqueue_cmd' was not declared. Should it be static?
drivers/staging/rtl8188eu/core/rtw_wlan_util.c:1225:5: warning:
  symbol 'wifirate2_ratetbl_inx' was not declared. Should it be static?
drivers/staging/rtl8188eu/hal/HalPhyRf_8188e.c:25:4: warning:
  symbol 'ODM_GetRightChnlPlaceforIQK' was not declared. Should it be static?
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:3109:5: warning:
  symbol 'rtw_ioctl' was not declared. Should it be static?
Signed-off-by: NJeff Oczek <jeffoczek@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Replacing MP_CLEAR_FLAG
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Replacing MP_SET_FLAG
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

merge u32 flag into unsigned long Flags

Replacing fMP_DISCONNECTED with DEVICE_FLAGS_DISCONNECTED
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Just test FLag and remove not.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

MP_IS_READY(fMP_DISCONNECTED) is used to block thread in vnt_tx_context
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed redundant comments from bssdb.h header file.
Signed-off-by: NIgor Bezukh <igbzkh@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed redundant comments in baseband.h header file.
Signed-off-by: NIgor Bezukh <igbzkh@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds a documentation file for all of the interfaces that were moved
to sysfs by the other patches in this set.
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove remnant code left over from the diagdump proc entry.
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the chipsetready proc entry to sysfs under a new directory guest. This
entry is used by Unisys application software on the guest to acknowledge
completion of specific events for integration purposes, but these
acknowledgements are not required for the guest to operate correctly.

The store function is simplified as well, to use scanf() instead of copying
the buffer and using strsep().
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The installer entry in /proc/visorchipset/installer was composed of three
separate fields as one entry. This patch removes the proc entry and associated
functions, and creates new fields with distinct entries under sysfs in the
visorchipset/install directory. The fields are:

	textid: used to send the ID of a string that should be displayed on
		s-Par's automatic installation progress screen. Setting this
		field when not in installation mode (boottotool was set on
		the previous guest boot) has no effect.

	remaining_steps: used to set the value of the progress bar on the
		s-Par automatic installation progress screen. This field has
		no effect if not in installation mode.

	error: used to send the ID of a string that should be displayed on
		s-Par's automatic installation progress screen when an error
		is encountered during installation. This field has no effect
		if not in installation mode.
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes trailing semicolon from macros within et131x.h
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fix spelling typos in comments and printk
within et131x.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>