The caam driver use two dma_map_sg path according to SG are chained
or not.
Since dma_map_sg can handle both case, clean the code with all
references to sg chained.

Thus removing dma_map_sg_chained, dma_unmap_sg_chained
and __sg_count functions.
Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The talitos driver use two dma_map_sg path
according to SG are chained or not.
Since dma_map_sg can handle both case, clean the code with all
references to sg chained.

Thus removing talitos_map_sg, talitos_unmap_sg_chain
and sg_count functions.
Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some code cleanups after crypto API changes:
- Change qat_algs_unregister to a void function to keep it consistent
  with qat_asym_algs_unregister.
- Remove empty functions qat_algs_init & qat_algs_exit.
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Module crc32c-intel uses a special read-only data section named .rotata.
This section is defined for K_table, and its name seems to be a spelling
mistake for .rodata.

Fixes: 473946e6 ("crypto: crc32c-pclmul - Shrink K_table to 32-bit words")
Signed-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The sahara_sg_length function of the sahara driver is the same
as sg_nents_for_len from lib/scatterlist.c
Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The get_sg_count function of amcc is the same as sg_nents_for_len from
lib/scatterlist.c
Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The sg_count function in bfin_crc.c is the same function as sg_nents.
Remove the duplicate code and use sg_nents() instead.
Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Restructure the x86 sha512 glue code so we will expose sha512 transforms
based on SSSE3, AVX or AVX2 as separate individual drivers when cpu
provides support. This will make it easy for alternative algorithms to
be used if desired and makes the code cleaner and easier to maintain.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Restructure the x86 sha256 glue code so we will expose sha256 transforms
based on SSSE3, AVX, AVX2 or SHA-NI extension as separate individual
drivers when cpu provides such support. This will make it easy for
alternative algorithms to be used if desired and makes the code cleaner
and easier to maintain.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Restructure the x86 sha1 glue code so we will expose sha1 transforms based
on SSSE3, AVX, AVX2 or SHA-NI extension as separate individual drivers
when cpu provides such support. This will make it easy for alternative
algorithms to be used if desired and makes the code cleaner and easier
to maintain.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch provides the configuration and build support to
include and build the optimized SHA1 and SHA256 update transforms
for the kernel's crypto library.
Originally-by: NChandramouli Narayanan <mouli_7982@yahoo.com>
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the glue code to detect and utilize the Intel SHA
extensions optimized SHA1 and SHA256 update transforms when available.

This code has been tested on Broxton for functionality.
Originally-by: NChandramouli Narayanan <mouli_7982@yahoo.com>
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch includes the Intel SHA Extensions optimized implementation
of SHA-256 update function. This function has been tested on Broxton
platform and measured a speed up of 3.6x over the SSSE3 implementiation
for 4K blocks.
Originally-by: NChandramouli Narayanan <mouli_7982@yahoo.com>
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch includes the Intel SHA Extensions optimized implementation
of SHA-1 update function. This function has been tested on Broxton
platform and measured a speed up of 3.6x over the SSSE3 implementiation
for 4K blocks.
Originally-by: NChandramouli Narayanan <mouli_7982@yahoo.com>
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NPankaj Dev <pankaj.dev@st.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NKieran Bingham <kieranbingham@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If we attempt to use sysfs to change the current RNG in the usual
way i.e. issuing something like:

`echo 8a8a000.rng > /sys/devices/virtual/misc/hw_random/rng_current`

... it will fail because the code doesn't currently take the '\n'
into consideration.  Well, now it does.
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NPeter Korsgaard <peter@korsgaard.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In April 2009, commit d4056405 ("Driver Core: misc: add node name support
for misc devices.") inadvertently changed the device node name from
/dev/hw_random to /dev/hwrng.  Since 6 years has passed since the change
it seems unpractical to change it back, as this node name is probably
considered ABI by now.  So instead, we'll just change the Kconfig help
to match the current situation.

NB: It looks like rng-tools have already been updated.
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NKieran Bingham <kieranbingham@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In April 2009, commit d4056405 ("Driver Core: misc: add node name support
for misc devices.") inadvertently changed the device node name from
/dev/hw_random to /dev/hwrng.  Since 6 years has passed since the change
it seems unpractical to change it back, as this node name is probably
considered ABI by now.  So instead, we'll just change the documentation
to match the current situation.

NB: It looks like rng-tools have already been updated.
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NKieran Bingham <kieranbingham@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

hour, min and sec are unsigned int and they can never be less than zero.
Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Load balancing of crypto instances only used a single device.
There was no problem with that on PF, but since there is only
one or two instance per VF we need to loadbalance across devices.
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit a1efb01f ("jump_label, locking/static_keys: Rename
JUMP_LABEL_TYPE_* and related helpers to the static_key* pattern")
introduced the definition of JUMP_TYPE_MASK in
include/linux/jump_label.h causing the following name collision:

In file included from drivers/crypto/caam/desc_constr.h:7:0,
                 from drivers/crypto/caam/ctrl.c:15:
drivers/crypto/caam/desc.h:1495:0: warning: "JUMP_TYPE_MASK" redefined
 #define JUMP_TYPE_MASK  (0x03 << JUMP_TYPE_SHIFT)
 ^
In file included from include/linux/module.h:19:0,
                 from drivers/crypto/caam/compat.h:9,
                 from drivers/crypto/caam/ctrl.c:11:
include/linux/jump_label.h:131:0: note: this is the location of the previous definition
 #define JUMP_TYPE_MASK 1UL

As JUMP_TYPE_MASK definition in desc.h is never used, we can safely remove
it to avoid the name collision.
Reported-by: NOlof's autobuilder <build@lixom.net>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: NHoria Geant? <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This platform drivers have a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: NLuis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

According to Documentation/CodingStyle:

"The preferred form for passing a size of a struct is the following:

	p = kmalloc(sizeof(*p), ...);"

,so do as suggested.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

There is no need to print a message simply saying that a kernel
driver has been registered, so remove it.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

There is no need to pre-initialize variable 'err' as this
initial value will be overwritten later on.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We can simplify the code by returning the error code immediately
instead of jumping to a goto label.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In some cases we don't want iommu to be enabled but still we want to enable VFs.
Signed-off-by: NJohn Griffin <john.griffin@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use resource managed function devm_hwrng_register instead of
hwrng_register to make the error-path simpler. Also, remove
octeon_rng_remove as it is now redundant.
Signed-off-by: NVaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

MX6SL has the same DCP crypto block as in MX23/MX28, so allow it to be
built for ARCH_MXC.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

These platform drivers have a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: NLuis de Bethencourt <luis@debethencourt.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: NLuis de Bethencourt <luis@debethencourt.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: NLuis de Bethencourt <luis@debethencourt.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The output buffer in test_ahash_speed will point to an address located
within the tcrypt module image.
This causes problems when trying to DMA map the buffer.
For e.g. on ARM-based LS1021A, a page fault occurs within the
DMA API when trying to access the struct page returned by
virt_to_page(output):

insmod tcrypt.ko mode=403

testing speed of async sha1 (sha1-caam)
test  0 (   16 byte blocks,   16 bytes per update,   1 updates):
Unable to handle kernel paging request at virtual address f07e9080
pgd = e58d0e00
[f07e9080] *pgd=80000080007003, *pmd=00000000
Internal error: Oops: 206 [#1] SMP THUMB2
Modules linked in: tcrypt(+)
CPU: 1 PID: 1119 Comm: insmod Not tainted 4.2.0-rc1-256134-gbf433416 #1
Hardware name: Freescale LS1021A
task: ea063900 ti: e5a34000 task.ti: e5a34000
PC is at dma_cache_maint_page+0x38/0xd0
LR is at __dma_page_cpu_to_dev+0x15/0x64
pc : [<800155a0>]    lr : [<8001564d>]    psr: 000f0033
sp : e5a35ca0  ip : 8063df00  fp : f07e9080
r10: 00000cd0  r9 : 8063df00  r8 : 805a2f04
r7 : 0017f804  r6 : 00000002  r5 : ee7f9000  r4 : 00000014
r3 : 80612d40  r2 : 01ff0080  r1 : 00000380  r0 : ee7f9000
Flags: nzcv  IRQs on  FIQs on  Mode SVC_32  ISA Thumb  Segment user
Control: 70c5387d  Table: e58d0e00  DAC: 9b7ede70
Process insmod (pid: 1119, stack limit = 0xe5a34210)
Stack: (0xe5a35ca0 to 0xe5a36000)
[...]
[<800155a0>] (dma_cache_maint_page) from [<8001564d>] (__dma_page_cpu_to_dev+0x15/0x64)
[<8001564d>] (__dma_page_cpu_to_dev) from [<800156eb>] (arm_dma_map_page+0x1f/0x44)
[<800156eb>] (arm_dma_map_page) from [<802935e3>] (ahash_digest+0x35f/0x510)
[<802935e3>] (ahash_digest) from [<7f800d03>] (test_ahash_speed.constprop.6+0x24a/0x4e4 [tcrypt])
[<7f800d03>] (test_ahash_speed.constprop.6 [tcrypt]) from [<7f802fd5>] (do_test+0x1898/0x2058 [tcrypt])
[<7f802fd5>] (do_test [tcrypt]) from [<7f80802f>] (tcrypt_mod_init+0x2e/0x63 [tcrypt])
[<7f80802f>] (tcrypt_mod_init [tcrypt]) from [<80009517>] (do_one_initcall+0xb3/0x134)
[<80009517>] (do_one_initcall) from [<80351ec7>] (do_init_module+0x3b/0x13c)
[<80351ec7>] (do_init_module) from [<8005cc3f>] (load_module+0x97b/0x9dc)
[<8005cc3f>] (load_module) from [<8005cd8d>] (SyS_finit_module+0x35/0x3e)
[<8005cd8d>] (SyS_finit_module) from [<8000d101>] (ret_fast_syscall+0x1/0x4c)
Code: 1aba 0152 eb00 0b02 (5882) 0f92

addr2line -f -i -e vmlinux 800155a0
page_zonenum
include/linux/mm.h:728
page_zone
include/linux/mm.h:881
dma_cache_maint_page
arch/arm/mm/dma-mapping.c:822
Signed-off-by: NHoria Geant? <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Pull ARM fixes from Russell King:
 "Three fixes and a resulting cleanup for -rc2:

   - Andre Przywara reported that he was seeing a warning with the new
     cast inside DMA_ERROR_CODE's definition, and fixed the incorrect
     use.

   - Doug Anderson noticed that kgdb causes a "scheduling while atomic"
     bug.

   - OMAP5 folk noticed that their Thumb-2 compiled X servers crashed
     when enabling support to cover ARMv6 CPUs due to a kernel bug
     leaking some conditional context into the signal handler"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8425/1: kgdb: Don't try to stop the machine when setting breakpoints
  ARM: 8437/1: dma-mapping: fix build warning with new DMA_ERROR_CODE definition
  ARM: get rid of needless #if in signal handling code
  ARM: fix Thumb2 signal handling when ARMv6 is enabled

Merge tag 'linux-kselftest-4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "This update contains 7 fixes for problems ranging from build failurs
  to incorrect error reporting"

* tag 'linux-kselftest-4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: exec: revert to default emit rule
  selftests: change install command to rsync
  selftests: mqueue: simplify the Makefile
  selftests: mqueue: allow extra cflags
  selftests: rename jump label to static_keys
  selftests/seccomp: add support for s390
  seltests/zram: fix syntax error

Pull power management and ACPI updates from Rafael Wysocki:
 "Included are: a somewhat late devfreq update which however is mostly
  fixes and cleanups with one new thing only (the PPMUv2 support on
  Exynos5433), an ACPI cpufreq driver fixup and two ACPI core cleanups
  related to preprocessor directives.

  Specifics:

   - Fix a memory allocation size in the devfreq core (Xiaolong Ye).

   - Fix a mistake in the exynos-ppmu DT binding (Javier Martinez
     Canillas).

   - Add support for PPMUv2 ((Platform Performance Monitoring Unit
     version 2.0) on the Exynos5433 SoCs (Chanwoo Choi).

   - Fix a type casting bug in the Exynos PPMU code (MyungJoo Ham).

   - Assorted devfreq code cleanups and optimizations (Javi Merino,
     MyungJoo Ham, Viresh Kumar).

   - Fix up the ACPI cpufreq driver to use a more lightweight way to get
     to its private data in the ->get() callback (Rafael J Wysocki).

   - Fix a CONFIG_ prefix bug in one of the ACPI drivers and make the
     ACPI subsystem use IS_ENABLED() instead of #ifdefs in function
     bodies (Sudeep Holla)"

* tag 'pm+acpi-4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: acpi-cpufreq: Use cpufreq_cpu_get_raw() in ->get()
  ACPI: Eliminate CONFIG_.*{, _MODULE} #ifdef in favor of IS_ENABLED()
  ACPI: int340x_thermal: add missing CONFIG_ prefix
  PM / devfreq: Fix incorrect type issue.
  PM / devfreq: tegra: Update governor to use devfreq_update_stats()
  PM / devfreq: comments for get_dev_status usage updated
  PM / devfreq: drop comment about thermal setting max_freq
  PM / devfreq: cache the last call to get_dev_status()
  PM / devfreq: Drop unlikely before IS_ERR(_OR_NULL)
  PM / devfreq: exynos-ppmu: bit-wise operation bugfix.
  PM / devfreq: exynos-ppmu: Update documentation to support PPMUv2
  PM / devfreq: exynos-ppmu: Add the support of PPMUv2 for Exynos5433
  PM / devfreq: event: Remove incorrect property in exynos-ppmu DT binding