- 21 10月, 2010 40 次提交
-
-
由 Julia Lawall 提交于
In this code, 0 is returned on failure, even though other failures return -ENOMEM or other similar values. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @a@ identifier alloc; identifier ret; constant C; expression x; @@ x = alloc(...); if (x == NULL) { <+... \(ret = -C; \| return -C; \) ...+> } @@ identifier f, a.alloc; expression ret; expression x,e1,e2,e3; @@ ret = 0 ... when != ret = e1 *x = alloc(...) ... when != ret = e2 if (x == NULL) { ... when != ret = e3 return ret; } // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 James Hogan 提交于
On resume, call request_irq() after resetting the hardware rather than before. It's a shared interrupt so the handler could be called immediately if another device on the same irq interrupts (and will be called immediately if CONFIG_DEBUG_SHIRQ=y), but unless the hardware is reinitialised with b44_init_hw() the read of the interrupt status register will hang the system. Signed-off-by: NJames Hogan <james@albanarts.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Make functions only used in one file local. Remove lots of dead code, relating to unsupported functions in mainline driver like RSS, IPv6, and TCP offload. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NDimitris Michailidis <dm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaud Patard 提交于
Commit c477d044 added support for RGMII rx/tx delays except that it ends up clearing rx/tx delays bit for modes differents that RGMII*ID. Due to this, ethernet is not working anymore on my guruplug server +. This patch is fixing that. Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yi Zou 提交于
The FCoE offload is enabled/disabled per adapter, but upper FCoE protocol stack could have multiple FCoE instances created on the same physical network interface, e.g., FCoE on multiple VLAN interfaces on the same physical network interface. In this case we want to turn on FCoE offload at the first request from ndo_fcoe_enable() but only turn off FCoE offload at the very last call to ndo_fcoe_disable(). This is fixed by adding a refcnt in the per adapter FCoE structure and tear down FCoE offload when refcnt decrements to zero. Signed-off-by: NYi Zou <yi.zou@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Current ixgbe stats have following problems : - Not 64 bit safe (on 32bit arches) - Not safe in ixgbe_clean_rx_irq() : All cpus dirty a common location (netdev->stats.rx_bytes & netdev->stats.rx_packets) without proper synchronization. This slow down a bit multiqueue operations, and possibly miss some updates. Fixes : Implement ndo_get_stats64() method to provide accurate 64bit rx|tx bytes/packets counters, using 64bit safe infrastructure. ixgbe_get_ethtool_stats() also use this infrastructure to provide 64bit safe counters. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Emil Tantilov 提交于
Update copyright notice Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guo-Fu Tseng 提交于
Advance version number and update copyright info Signed-off-by: NGuo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guo-Fu Tseng 提交于
Adding mii-tool support for some distribution only have mii-tool installed by default. Signed-off-by: NGuo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guo-Fu Tseng 提交于
Adding read memory barrier in between flag reading and data reading of receive descriptors. This prevents the data being read before hardware complete writing informations. Reported-by: NStefan Hajnoczi <stefanha@gmail.com> Signed-off-by: NGuo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guo-Fu Tseng 提交于
Explains what `fdc` variable is for. Signed-off-by: NGuo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guo-Fu Tseng 提交于
Adding phy_on in opposition to phy_off. Signed-off-by: NGuo-Fu Tseng <cooldavid@cooldavid.org> Cc: <stable@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bandan Das 提交于
checkpatch.pl cleanup : Remove braces from single statement blocks. Signed-off-by: NBandan Das <bandan.das@stratus.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bandan Das 提交于
checkpatch.pl cleanup: Added spaces around operators at various places. Also fixed some c99 style comments that I came across. Signed-off-by: NBandan Das <bandan.das@stratus.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bernard Blackham 提交于
The smsc95xx driver currently generates a new random MAC address every time the interface is brought up. This makes it impossible to override using the standard `ifconfig hw ether` approach. Past patches tried to make the MAC address a module parameter or base it off the die ID, but it seems to me much simpler (and hopefully less controversial) to stick with the current random generation scheme, but allow the user to change the address. This patch does exactly that - it moves the random address generation from smsc95xx_reset() into smsc95xx_bind(), so that it is done once on module load, not on every ifup. The user can then override this using the standard mechanisms. Applies against 2.6.35 and linux-2.6 head. Signed-off-by: NBernard Blackham <b-omap@largestprime.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
A number of customers are reporting packet loss under certain workloads (e.g. heavy bursts of small packets) with flow control disabled. A larger rx ring helps to prevent these losses. No change in default rx ring size and memory consumption. Signed-off-by: NAndy Gospodarek <andy@greyhouse.net> Acked-by: NJohn Feeney <jfeeney@redhat.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Only used in main file. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NAndy Gospodarek <andy@greyhouse.net> Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Make routines that are only used in one file static. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Gcc doesn't usually handle inline across compilation units, and the functions don't have to be global in scope. Move the set/reset flag functions int the existing vmxnet3 header. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NShreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NFlavio Leitner <fleitner@redhat.com> Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Make local functions and variable static. Do some rearrangement of the string table stuff to put it where it gets used. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
If dma mapping fail we are dropping packages or fail to open device. But exact reason of drop/fail stays unknow for a user, so print errors. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
Fix switching device to low-speed mode after resume reported in: https://bugzilla.redhat.com/show_bug.cgi?id=502974Reported-and-tested-by: NLaurentiu Badea <bugzilla-redhat@wotevah.com> Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
Since we do not change rx buffer size any longer, we can clean up rtl8169_change_mtu and in consequence rtl8169_down. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
Only increase tx_{packets,dropped} statistics when transmit or drop full skb, not just fragment. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
Check possible dma mapping errors and do clean up if it happens. Fix overwrap bug in rtl8169_tx_clear on the way. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hao Zheng 提交于
Make the bnx2x driver use the new vlan accleration model. Signed-off-by: NHao Zheng <hzheng@nicira.com> Signed-off-by: NJesse Gross <jesse@nicira.com> CC: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Gross 提交于
Make the ixgbe driver use the new vlan accleration model. Signed-off-by: NJesse Gross <jesse@nicira.com> CC: Peter Waskiewicz <peter.p.waskiewicz.jr@intel.com> CC: Emil Tantilov <emil.s.tantilov@intel.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Gross 提交于
Make the bnx2 driver use the new vlan accleration model. Signed-off-by: NJesse Gross <jesse@nicira.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Gross 提交于
Many (but not all) drivers check to see whether there is a vlan group configured before using a tag stored in the skb. There's not much point in this check since it just throws away data that should only be present in the expected circumstances. However, it will soon be legal and expected to get a vlan tag when no vlan group is configured, so remove this check from all drivers to avoid dropping the tags. Signed-off-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Gross 提交于
VLAN_GROUP_ARRAY_LEN is simply the number of possible vlan VIDs. Since vlan groups will soon be more of an implementation detail for vlan devices, rename the constant to be descriptive of its actual purpose. Signed-off-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasanthy Kolluri 提交于
Fix a log message Signed-off-by: NVasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NDavid Wang <dwang2@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasanthy Kolluri 提交于
Change min MTU to 68. Signed-off-by: NVasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NDavid Wang <dwang2@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasanthy Kolluri 提交于
Replace no wait CMD_ENABLE firmware devcmd with CMD_ENABLE_WAIT Signed-off-by: NVasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NDavid Wang <dwang2@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasanthy Kolluri 提交于
Let the firmware know about the mac address set by the user using ndo_set_mac_address Signed-off-by: NVasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NDavid Wang <dwang2@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasanthy Kolluri 提交于
Add support for multiple hardware receive queues. The ingress traffic is hashed into one of the receive queues based on IP or TCP or both headers. The max no. of receive queues supported is 8. Signed-off-by: NVasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NDavid Wang <dwang2@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-