- 04 6月, 2014 9 次提交
-
-
由 Chuck Lever 提交于
Clean up: All remaining callers of rpcrdma_deregister_external() pass NULL as the last argument, so remove that argument. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
If the selected memory registration mode is not supported by the underlying provider/HCA, the NFS mount command reports that there was an invalid mount option, and fails. This is misleading. Reporting a problem allocating memory is a lot closer to the truth. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
An audit of in-kernel RDMA providers that do not support the FRMR memory registration shows that several of them support MTHCAFMR. Prefer MTHCAFMR when FRMR is not supported. If MTHCAFMR is not supported, only then choose ALLPHYSICAL. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
All kernel RDMA providers except amso1100 support either MTHCAFMR or FRMR, both of which are faster than REGISTER. amso1100 can continue to use ALLPHYSICAL. The only other ULP consumer in the kernel that uses the reg_phys_mr verb is Lustre. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
The MEMWINDOWS and MEMWINDOWS_ASYNC memory registration modes were intended as stop-gap modes before the introduction of FRMR. They are now considered obsolete. MEMWINDOWS_ASYNC is also considered unsafe because it can leave client memory registered and exposed for an indeterminant time after each I/O. At this point, the MEMWINDOWS modes add needless complexity, so remove them. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
Clean up: This memory registration mode is slow and was never meant for use in production environments. Remove it to reduce implementation complexity. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
An IB provider can invoke rpcrdma_conn_func() in an IRQ context, thus rpcrdma_conn_func() cannot be allowed to directly invoke generic RPC functions like xprt_wake_pending_tasks(). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Allen Andrews 提交于
Two memory region leaks were found during testing: 1. rpcrdma_buffer_create: While allocating RPCRDMA_FRMR's ib_alloc_fast_reg_mr is called and then ib_alloc_fast_reg_page_list is called. If ib_alloc_fast_reg_page_list returns an error it bails out of the routine dropping the last ib_alloc_fast_reg_mr frmr region creating a memory leak. Added code to dereg the last frmr if ib_alloc_fast_reg_page_list fails. 2. rpcrdma_buffer_destroy: While cleaning up, the routine will only free the MR's on the rb_mws list if there are rb_send_bufs present. However, in rpcrdma_buffer_create while the rb_mws list is being built if one of the MR allocation requests fail after some MR's have been allocated on the rb_mws list the routine never gets to create any rb_send_bufs but instead jumps to the rpcrdma_buffer_destroy routine which will never free the MR's on rb_mws list because the rb_send_bufs were never created. This leaks all the MR's on the rb_mws list that were created prior to one of the MR allocations failing. Issue(2) was seen during testing. Our adapter had a finite number of MR's available and we created enough connections to where we saw an MR allocation failure on our Nth NFS connection request. After the kernel cleaned up the resources it had allocated for the Nth connection we noticed that FMR's had been leaked due to the coding error described above. Issue(1) was seen during a code review while debugging issue(2). Signed-off-by: NAllen Andrews <allen.andrews@emulex.com> Reviewed-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Steve Wise 提交于
Some rdma devices don't support a fast register page list depth of at least RPCRDMA_MAX_DATA_SEGS. So xprtrdma needs to chunk its fast register regions according to the minimum of the device max supported depth or RPCRDMA_MAX_DATA_SEGS. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Reviewed-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 29 5月, 2014 1 次提交
-
-
由 David Rientjes 提交于
rpc_malloc() allocates with GFP_NOWAIT without making any attempt at reclaim so it easily fails when low on memory. This ends up spamming the kernel log: SLAB: Unable to allocate memory on node 0 (gfp=0x4000) cache: kmalloc-8192, object size: 8192, order: 1 node 0: slabs: 207/207, objs: 207/207, free: 0 rekonq: page allocation failure: order:1, mode:0x204000 CPU: 2 PID: 14321 Comm: rekonq Tainted: G O 3.15.0-rc3-12.gfc9498b-desktop+ #6 Hardware name: System manufacturer System Product Name/M4A785TD-V EVO, BIOS 2105 07/23/2010 0000000000000000 ffff880010ff17d0 ffffffff815e693c 0000000000204000 ffff880010ff1858 ffffffff81137bd2 0000000000000000 0000001000000000 ffff88011ffebc38 0000000000000001 0000000000204000 ffff88011ffea000 Call Trace: [<ffffffff815e693c>] dump_stack+0x4d/0x6f [<ffffffff81137bd2>] warn_alloc_failed+0xd2/0x140 [<ffffffff8113be19>] __alloc_pages_nodemask+0x7e9/0xa30 [<ffffffff811824a8>] kmem_getpages+0x58/0x140 [<ffffffff81183de6>] fallback_alloc+0x1d6/0x210 [<ffffffff81183be3>] ____cache_alloc_node+0x123/0x150 [<ffffffff81185953>] __kmalloc+0x203/0x490 [<ffffffffa06b0ee2>] rpc_malloc+0x32/0xa0 [sunrpc] [<ffffffffa06a6999>] call_allocate+0xb9/0x170 [sunrpc] [<ffffffffa06b19d8>] __rpc_execute+0x88/0x460 [sunrpc] [<ffffffffa06b2da9>] rpc_execute+0x59/0xc0 [sunrpc] [<ffffffffa06a932b>] rpc_run_task+0x6b/0x90 [sunrpc] [<ffffffffa077b5c1>] nfs4_call_sync_sequence+0x51/0x80 [nfsv4] [<ffffffffa077d45d>] _nfs4_do_setattr+0x1ed/0x280 [nfsv4] [<ffffffffa0782a72>] nfs4_do_setattr+0x72/0x180 [nfsv4] [<ffffffffa078334c>] nfs4_proc_setattr+0xbc/0x140 [nfsv4] [<ffffffffa074a7e8>] nfs_setattr+0xd8/0x240 [nfs] [<ffffffff811baa71>] notify_change+0x231/0x380 [<ffffffff8119cf5c>] chmod_common+0xfc/0x120 [<ffffffff8119df80>] SyS_chmod+0x40/0x90 [<ffffffff815f4cfd>] system_call_fastpath+0x1a/0x1f ... If the allocation fails, simply return NULL and avoid spamming the kernel log. Reported-by: NMarc Dietrich <marvin24@gmx.de> Signed-off-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 19 5月, 2014 1 次提交
-
-
由 Trond Myklebust 提交于
We're not taking a reference in the case where _gss_mech_get_by_pseudoflavor loops without finding the correct rpcsec_gss flavour, so why are we releasing it? Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 12 4月, 2014 1 次提交
-
-
由 David S. Miller 提交于
Several spots in the kernel perform a sequence like: skb_queue_tail(&sk->s_receive_queue, skb); sk->sk_data_ready(sk, skb->len); But at the moment we place the SKB onto the socket receive queue it can be consumed and freed up. So this skb->len access is potentially to freed up memory. Furthermore, the skb->len can be modified by the consumer so it is possible that the value isn't accurate. And finally, no actual implementation of this callback actually uses the length argument. And since nobody actually cared about it's value, lots of call sites pass arbitrary values in such as '0' and even '1'. So just remove the length argument from the callback, that way there is no confusion whatsoever and all of these use-after-free cases get fixed as a side effect. Based upon a patch by Eric Dumazet and his suggestion to audit this issue tree-wide. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 4月, 2014 1 次提交
-
-
由 Stanislav Kinsbursky 提交于
There could be a case, when NFSd file system is mounted in network, different to socket's one, like below: "ip netns exec" creates new network and mount namespace, which duplicates NFSd mount point, created in init_net context. And thus NFS server stop in nested network context leads to RPCBIND client destruction in init_net. Then, on NFSd start in nested network context, rpc.nfsd process creates socket in nested net and passes it into "write_ports", which leads to RPCBIND sockets creation in init_net context because of the same reason (NFSd monut point was created in init_net context). An attempt to register passed socket in nested net leads to panic, because no RPCBIND client present in nexted network namespace. This patch add check that passed socket's net matches NFSd superblock's one. And returns -EINVAL error to user psace otherwise. v2: Put socket on exit. Reported-by: NWeng Meiling <wengmeiling.weng@huawei.com> Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Cc: stable@vger.kernel.org Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 30 3月, 2014 4 次提交
-
-
由 Kinglong Mee 提交于
Don't move the assign of args->bc_xprt->xpt_bc_xprt out of xs_setup_bc_tcp, because rpc_ping (which is in rpc_create) will using it. Signed-off-by: NKinglong Mee <kinglongmee@gmail.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Kinglong Mee 提交于
Besides checking rpc_xprt out of xs_setup_bc_tcp, increase it's reference (it's important). Signed-off-by: NKinglong Mee <kinglongmee@gmail.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Kinglong Mee 提交于
Signed-off-by: NKinglong Mee <kinglongmee@gmail.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Kinglong Mee 提交于
Backchannel xprt isn't freed right now. Free it in bc_destroy, and put the reference of THIS_MODULE. Signed-off-by: NKinglong Mee <kinglongmee@gmail.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 29 3月, 2014 5 次提交
-
-
由 J. Bruce Fields 提交于
Allow xdr_buf_subsegment(&buf, &buf, base, len) to modify an xdr_buf in-place. Also, none of the callers need the iov_base of head or tail to be zeroed out. Also add documentation. (As it turns out, I'm not really using this new guarantee, but it seems a simple way to make this function a bit more robust.) Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Kinglong Mee 提交于
Creating xprt failed after xs_format_peer_addresses, sunrpc must free those memory of peer addresses in xprt. Signed-off-by: NKinglong Mee <kinglongmee@gmail.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Jeff Layton 提交于
The xdr_off value in dma_map_xdr gets passed to ib_dma_map_page as the offset into the page to be mapped. This calculation does not correctly take into account the case where the data starts at some offset into the page. Increment the xdr_off by the page_base to ensure that it is respected. Cc: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Jeff Layton 提交于
There are two entirely separate modules under xprtrdma/ and there's no reason that enabling one should automatically enable the other. Add config options for each one so they can be enabled/disabled separately. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Tom Tucker 提交于
The server regression was caused by the addition of rq_next_page (afc59400). There were a few places that were missed with the update of the rq_respages array. Signed-off-by: NTom Tucker <tom@ogc.us> Tested-by: NSteve Wise <swise@ogc.us> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 28 3月, 2014 2 次提交
-
-
由 Rashika Kheria 提交于
Mark functions as static in net/sunrpc/svc_xprt.c because they are not used outside this file. This eliminates the following warning in net/sunrpc/svc_xprt.c: net/sunrpc/svc_xprt.c:574:5: warning: no previous prototype for ‘svc_alloc_arg’ [-Wmissing-prototypes] net/sunrpc/svc_xprt.c:615:18: warning: no previous prototype for ‘svc_get_next_xprt’ [-Wmissing-prototypes] net/sunrpc/svc_xprt.c:694:6: warning: no previous prototype for ‘svc_add_new_temp_xprt’ [-Wmissing-prototypes] Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Jeff Layton 提交于
It retries in 1s, not 1000 jiffies. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 21 3月, 2014 2 次提交
-
-
由 Trond Myklebust 提交于
When restarting an rpc call, we should not be carrying over data from the previous call. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 20 3月, 2014 2 次提交
-
-
由 Steve Dickson 提交于
Don't schedule an rpc_delay before checking to see if the task is a SOFTCONN because the tk_callback from the delay (__rpc_atrun) clears the task status before the rpc_exit_task can be run. Signed-off-by: NSteve Dickson <steved@redhat.com> Fixes: 561ec160 (SUNRPC: call_connect_status should recheck...) Link: http://lkml.kernel.org/r/5329CF7C.7090308@RedHat.comSigned-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 18 3月, 2014 4 次提交
-
-
由 Chuck Lever 提交于
The use of KERN_INFO causes garbage characters to appear when debugging is enabled. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Chuck Lever 提交于
After commit a11a2bf4, "SUNRPC: Optimise away unnecessary data moves in xdr_align_pages", Thu Aug 2 13:21:43 2012, READs larger than a few hundred bytes via NFS/RDMA no longer work. This commit exposed a long-standing bug in rpcrdma_inline_fixup(). I reproduce this with an rsize=4096 mount using the cthon04 basic tests. Test 5 fails with an EIO error. For my reproducer, kernel log shows: NFS: server cheating in read reply: count 4096 > recvd 0 rpcrdma_inline_fixup() is zeroing the xdr_stream::page_len field, and xdr_align_pages() is now returning that value to the READ XDR decoder function. That field is set up by xdr_inline_pages() by the READ XDR encoder function. As far as I can tell, it is supposed to be left alone after that, as it describes the dimensions of the reply xdr_stream, not the contents of that stream. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=68391Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
If the rpcbind server is unavailable, we still want the RPC client to respect the timeout. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
When the server is unavailable due to a networking error, etc, we want the RPC client to respect the timeout delays when attempting to reconnect. Reported-by: NNeil Brown <neilb@suse.de> Fixes: 561ec160 (SUNRPC: call_connect_status should recheck bind..) Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 17 2月, 2014 2 次提交
-
-
由 Trond Myklebust 提交于
In gss_alloc_msg(), if the call to gss_encode_v1_msg() fails, we want to release the reference to the pipe_version that was obtained earlier in the function. Fixes: 9d3a2260 (SUNRPC: Fix buffer overflow checking in...) Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
Fix a race in which the RPC client is shutting down while the gss daemon is processing a downcall. If the RPC client manages to shut down before the gss daemon is done, then the struct gss_auth used in gss_release_msg() may have already been freed. Link: http://lkml.kernel.org/r/1392494917.71728.YahooMailNeo@web140002.mail.bf1.yahoo.comReported-by: NJohn <da_audiophile@yahoo.com> Reported-by: NBorislav Petkov <bp@alien8.de> Cc: stable@vger.kernel.org # 3.12+ Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 12 2月, 2014 2 次提交
-
-
由 Trond Myklebust 提交于
Since TCP is a stream protocol, our callback read code needs to take into account the fact that RPC callbacks are not always confined to a single TCP segment. This patch adds support for multiple TCP segments by ensuring that we only remove the rpc_rqst structure from the 'free backchannel requests' list once the data has been completely received. We rely on the fact that TCP data is ordered for the duration of the connection. Reported-by: Nshaobingqing <shaobingqing@bwstor.com.cn> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
The call to xprt_free_allocation() will call list_del() on req->rq_bc_pa_list, which is not attached to a list. This patch moves the list_del() out of xprt_free_allocation() and into those callers that need it. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 11 2月, 2014 2 次提交
-
-
由 Trond Myklebust 提交于
When a send failure occurs due to the socket being out of buffer space, we call xs_nospace() in order to have the RPC task wait until the socket has drained enough to make it worth while trying again. The current patch fixes a race in which the socket is drained before we get round to setting up the machinery in xs_nospace(), and which is reported to cause hangs. Link: http://lkml.kernel.org/r/20140210170315.33dfc621@notabene.brown Fixes: a9a6b52e (SUNRPC: Don't start the retransmission timer...) Reported-by: NNeil Brown <neilb@suse.com> Cc: stable@vger.kernel.org Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
An infinite loop is caused when nfs4_establish_lease() fails with -EACCES. This causes nfs4_handle_reclaim_lease_error() to sleep a bit and resets the NFS4CLNT_LEASE_EXPIRED bit. This in turn causes nfs4_state_manager() to try and reestablished the lease, again, again, again... The problem is a valid RPCSEC_GSS client is being created when rpc.gssd is not running. Link: http://lkml.kernel.org/r/1392066375-16502-1-git-send-email-steved@redhat.com Fixes: 0ea9de0e (sunrpc: turn warn_gssd() log message into a dprintk()) Reported-by: NSteve Dickson <steved@redhat.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 10 2月, 2014 1 次提交
-
-
由 Rashika Kheria 提交于
Mark functions as static in net/sunrpc/svc_xprt.c because they are not used outside this file. This eliminates the following warning in net/sunrpc/svc_xprt.c: net/sunrpc/svc_xprt.c:574:5: warning: no previous prototype for ‘svc_alloc_arg’ [-Wmissing-prototypes] net/sunrpc/svc_xprt.c:615:18: warning: no previous prototype for ‘svc_get_next_xprt’ [-Wmissing-prototypes] net/sunrpc/svc_xprt.c:694:6: warning: no previous prototype for ‘svc_add_new_temp_xprt’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 1月, 2014 1 次提交
-
-
由 Jeff Layton 提交于
The original printk() made sense when the GSSAPI codepaths were called only when sec=krb5* was explicitly requested. Now however, in many cases the nfs client will try to acquire GSSAPI credentials by default, even when it's not requested. Since we don't have a great mechanism to distinguish between the two cases, just turn the pr_warn into a dprintk instead. With this change we can also get rid of the ratelimiting. We do need to keep the EXPORT_SYMBOL(gssd_running) in place since auth_gss.ko needs it and sunrpc.ko provides it. We can however, eliminate the gssd_running call in the nfs code since that's a bit of a layering violation. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-