The layoutreturn code currently relies on pnfs_put_lseg() to initiate the
RPC call when conditions are right. A problem arises when we want to
free the layout segment from inside an inode->i_lock section (e.g. in
pnfs_clear_request_commit()), since we cannot sleep.

The workaround is to move the actual call to pnfs_send_layoutreturn()
to pnfs_put_layout_hdr(), which doesn't have this restriction.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Make it more obvious what we're returning...
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Fix a bug whereby if all the layout segments could be immediately freed,
the call to pnfs_error_mark_layout_for_return() would never result in
a layoutreturn.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If pnfs_mark_matching_lsegs_return() needs to mark a layout segment for
return, then it must also set the return iomode.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

A stateid is a structure, pass it as a pointer.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If the layout segment is invalid, then we should not be adding more
write requests to the commit list. Instead, those writes should be
replayed after requesting a new layout.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If the client needs to delay the layout callback, then speed up the recall
process by marking the remaining layout segments to be actively returned
by the client.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

This ensures that we don't reuse the stateid if a layout return or
implied layout return means that we've returned all layout segments
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

In pNFS/flexfiles, we want to return the layout without necessarily marking
it as having completely failed. We therefore move the call to
pnfs_layout_io_set_failed() out of pnfs_error_mark_layout_for_return(),
and then ensura that pNFS/files layout calls it separately.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Fix a bug in which flexfiles clients are falling back to I/O through the
MDS even when the FF_FLAGS_NO_IO_THRU_MDS flag is set.

The flexfiles client will always report errors through the LAYOUTRETURN
and/or LAYOUTERROR mechanisms, so it should normally be safe for it
to retry the LAYOUTGET until it fails or succeeds.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

When we fail to queue a read page to IO descriptor,
we need to clean it up otherwise it is hanging around
preventing nfs module from being removed.

When we fail to queue a write page to IO descriptor,
we need to clean it up and also save the failure status
to open context. Then at file close, we can try to write
pages back again and drop the page if it fails to writeback
in .launder_page, which will be done in the next patch.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

In case we fail during setting things up for read/write IO, set
pg_error in IO descriptor and do the cleanup in nfs_pageio_add_request,
where we clean up all pages that are still hanging around on the IO
descriptor.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

For ERESTARTSYS/EIO/EROFS/ENOSPC/E2BIG in layoutget, we
should just bail out instead of hiding the error and
retrying inband IO.

Change all the call sites to pop the error all the way up.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Instead of displaying a layout segment pointer in these tracepoints,
let's use the layout stateid, now that Olga gave us a set of tools for
displaying them.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

pnfs_update_layout is really the "nexus" of layout handling. If it
returns NULL then we end up going through the MDS. This patch adds
some tracepoints to that function that allow us to determine the
cause when we end up going through the MDS unexpectedly.
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Jan Stancek reported that I wrecked things for him by fixing things for
Vladimir :/

His report was due to an UNINTERRUPTIBLE wait getting -EINTR, which
should not be possible, however my previous patch made this possible by
unconditionally checking signal_pending().

We cannot use current->state as was done previously, because the
instruction after the store to that variable it can be changed.  We must
instead pass the initial state along and use that.

Fixes: 68985633 ("sched/wait: Fix signal handling in bit wait helpers")
Reported-by: NJan Stancek <jstancek@redhat.com>
Reported-by: NChris Mason <clm@fb.com>
Tested-by: NJan Stancek <jstancek@redhat.com>
Tested-by: NVladimir Murzin <vladimir.murzin@arm.com>
Tested-by: NChris Mason <clm@fb.com>
Reviewed-by: NPaul Turner <pjt@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: tglx@linutronix.de
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: hpa@zytor.com
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

pnfs_layout_process will check the returned layout stateid against what
the kernel has in-core. If it turns out that the stateid we received is
older, then we should resend the LAYOUTGET instead of falling back to
MDS I/O.
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org # 3.18+
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If non rpc-based layout driver return bad length of data, nfs retries
by calling rpc_restart_call_prepare() that cause an NULL reference panic.

This patch lets nfs retry through MDS for non rpc-based layout driver
return bad length of data.

[13034.883329] BUG: unable to handle kernel NULL pointer dereference at           (null)
[13034.884902] IP: [<ffffffffa00db372>] rpc_restart_call_prepare+0x62/0x90 [sunrpc]
[13034.886558] PGD 0
[13034.888126] Oops: 0000 [#1] KASAN
[13034.889710] Modules linked in: blocklayoutdriver(OE) nfsv4(OE) nfs(OE) fscache(E) nfsd(OE) xfs libcrc32c coretemp btrfs crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev vmw_balloon auth_rpcgss shpchp nfs_acl lockd vmw_vmci parport_pc xor raid6_pq grace parport sunrpc i2c_piix4 vmwgfx drm_kms_helper ttm drm mptspi e1000 serio_raw scsi_transport_spi mptscsih mptbase ata_generic pata_acpi [last unloaded: fscache]
[13034.898260] CPU: 0 PID: 10112 Comm: kworker/0:1 Tainted: G           OE   4.3.0-rc5+ #279
[13034.899932] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015
[13034.903342] Workqueue: events bl_read_cleanup [blocklayoutdriver]
[13034.905059] task: ffff88006a9148c0 ti: ffff880035e90000 task.ti: ffff880035e90000
[13034.906827] RIP: 0010:[<ffffffffa00db372>]  [<ffffffffa00db372>] rpc_restart_call_prepare+0x62/0x90 [sunrpc]
[13034.910522] RSP: 0018:ffff880035e97b58  EFLAGS: 00010282
[13034.912378] RAX: fffffbfff04a5a94 RBX: ffff880068fe4858 RCX: 0000000000000003
[13034.914339] RDX: dffffc0000000000 RSI: 0000000000000003 RDI: 0000000000000282
[13034.916236] RBP: ffff880035e97b68 R08: 0000000000000001 R09: 0000000000000001
[13034.918229] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[13034.920007] R13: ffff880068fe4858 R14: ffff880068fe4a60 R15: 0000000000001000
[13034.921845] FS:  0000000000000000(0000) GS:ffffffff82247000(0000) knlGS:0000000000000000
[13034.923645] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[13034.925525] CR2: 0000000000000000 CR3: 00000000063dd000 CR4: 00000000001406f0
[13034.932808] Stack:
[13034.934813]  ffff880068fe4780 0000000000001000 ffff880035e97ba8 ffffffffa08800d2
[13034.936675]  ffffffffa088029d ffff880068fe4780 ffff880068fe4858 ffffffffa089c0a0
[13034.938593]  ffff880068fe47e0 ffff88005d59faf0 ffff880035e97be0 ffffffffa087e08f
[13034.940454] Call Trace:
[13034.942388]  [<ffffffffa08800d2>] nfs_readpage_result+0x112/0x200 [nfs]
[13034.944317]  [<ffffffffa088029d>] ? nfs_readpage_done+0xdd/0x160 [nfs]
[13034.946267]  [<ffffffffa087e08f>] nfs_pgio_result+0x9f/0x120 [nfs]
[13034.948166]  [<ffffffffa09266cc>] pnfs_ld_read_done+0x7c/0x1e0 [nfsv4]
[13034.950247]  [<ffffffffa03b07ee>] bl_read_cleanup+0x2e/0x60 [blocklayoutdriver]
[13034.952156]  [<ffffffff810ebf62>] process_one_work+0x412/0x870
[13034.954102]  [<ffffffff810ebe84>] ? process_one_work+0x334/0x870
[13034.955949]  [<ffffffff810ebb50>] ? queue_delayed_work_on+0x40/0x40
[13034.957985]  [<ffffffff810ec441>] worker_thread+0x81/0x6a0
[13034.959817]  [<ffffffff810ec3c0>] ? process_one_work+0x870/0x870
[13034.961785]  [<ffffffff810f43bd>] kthread+0x17d/0x1a0
[13034.963544]  [<ffffffff810f4240>] ? kthread_create_on_node+0x330/0x330
[13034.965479]  [<ffffffff81100428>] ? finish_task_switch+0x88/0x220
[13034.967223]  [<ffffffff810f4240>] ? kthread_create_on_node+0x330/0x330
[13034.968929]  [<ffffffff81b6ae5f>] ret_from_fork+0x3f/0x70
[13034.970534]  [<ffffffff810f4240>] ? kthread_create_on_node+0x330/0x330
[13034.972176] Code: c7 43 50 40 84 0d a0 e8 3d fe 1c e1 48 8d 7b 58 c7 83 e4 00 00 00 00 00 00 00 e8 ca fe 1c e1 4c 8b 63 58 4c 89 e7 e8 be fe 1c e1 <49> 83 3c 24 00 74 12 48 c7 43 50 f0 a2 0e a0 b8 01 00 00 00 5b
[13034.977148] RIP  [<ffffffffa00db372>] rpc_restart_call_prepare+0x62/0x90 [sunrpc]
[13034.978780]  RSP <ffff880035e97b58>
[13034.980399] CR2: 0000000000000000
Signed-off-by: NKinglong Mee <kinglongmee@gmail.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If we send a layoutreturn asynchronously before close, the close
might reach server first and layoutreturn would fail with BADSTATEID
because there is nothing keeping the layout stateid alive.

Also do not pretend sending layoutreturn if we are not.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If we have a read layout, then sanity check the minimal layout length
so that it does not extend beyond the end of file.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

It's not sufficient to just mark the layout segment for layout return. We
also need to set the NFS_LAYOUT_RETURN_BEFORE_CLOSE flag in the layout header.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

This is needed in order to allow merging of contiguous layout segments,
and also to correct the ordering of layouts for those device drivers that
don't necessarily want to place the read-write layouts first.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Allow advanced users to set the layoutstats timer in order to lengthen
or shorten the period between layoutstat transmissions to the server.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If we return delegation before closing, we fail to do roc check
during close because NFS_LAYOUT_ROC is cleared by delegreturn
and it causes layouts to be still hanging around after delegreturn
+ close, which is a voilation against protocol.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Allow tracing of return-on-close.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If layout is marked by NFS_LAYOUT_RETURN_BEFORE_CLOSE, we should always
send LAYOUTRETURN before close, and we don't need to do ROC drain if we
do send LAYOUTRETURN.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The helper pnfs_roc() has already verified that we have no delegations,
and no further open files, hence no outstanding I/O and it has marked
all the return-on-close lsegs as being invalid.
Furthermore, it sets the NFS_LAYOUT_RETURN bit, thus serialising the
close/delegreturn with all future layoutget calls on this inode.

The checks in pnfs_roc_drain() for valid layout segments are therefore
redundant: those cannot exist until another layoutget completes.
The other check for whether or not NFS_LAYOUT_RETURN is set, actually
causes a hang, since we already know that we hold that flag.

To fix, we therefore strip out all the functionality in pnfs_roc_drain()
except the retrieval of the barrier state, and then rename the function
accordingly.
Reported-by: NChristoph Hellwig <hch@infradead.org>
Fixes: 5c4a79fb ("Don't prevent layoutgets when doing return-on-close")
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

pnfs_clear_layoutreturn_waitbit() should already be calling
rpc_wake_up(&NFS_SERVER(ino)->roc_rpcwaitq) for us.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

layoutget now should already be serialised w.r.t. layout returns
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The NFS_LAYOUT_RETURN bit already suffices to ensure that layoutget
is blocked.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If there is an outstanding return-on-close, then we just want new
layoutget requests to wait rather than fail.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

We should always test for outstanding layout returns, whether or not
pnfs_should_retry_layoutget() is true.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If there are no valid layout segments, then we should already have
checked in pnfs_update_layout() whether or not this is the first
layoutget.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Prevent a potential deadlock.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>