So we now have the following system entry code related
files, which define the following system call instruction
and other entry paths:

   entry_32.S            # 32-bit binaries on 32-bit kernels
   entry_64.S            # 64-bit binaries on 64-bit kernels
   entry_64_compat.S	 # 32-bit binaries on 64-bit kernels

Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Really swap arguments #4 and #5 in stub32_clone instead of
"optimizing" it into a move.

Yes, tls_val is currently unused. Yes, on some CPUs XCHG is a
little bit more expensive than MOV. But a cycle or two on an
expensive syscall like clone() is way below noise floor, and
this optimization is simply not worth the obfuscation of logic.

[ There's also ongoing work on the clone() ABI by Josh Triplett
  that will depend on this change later on. ]
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1433339930-20880-2-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The reason for copying of %r8 to %rcx is quite non-obvious.
Add a comment which explains why it is done.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1433339930-20880-1-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Make the 64-bit compat 32-bit syscall entry code a bit more readable:

 - eliminate whitespace noise

 - use consistent vertical spacing

 - use consistent assembly coding style similar to entry_64.S

 - fix various comments

No code changed:

arch/x86/entry/ia32entry.o:

   text	   data	    bss	    dec	    hex	filename
   1391	      0	      0	   1391	    56f	ia32entry.o.before
   1391	      0	      0	   1391	    56f	ia32entry.o.after

md5:
   f28501dcc366e68b557313942c6496d6  ia32entry.o.before.asm
   f28501dcc366e68b557313942c6496d6  ia32entry.o.after.asm

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

SYSENTER and SYSCALL 32-bit entry points differ in handling of
arg2 and arg6.

SYSENTER:
 * ecx  arg2
 * ebp  user stack
 * 0(%ebp) arg6

SYSCALL:
 * ebp  arg2
 * esp  user stack
 * 0(%esp) arg6

Sysenter code loads 0(%ebp) to %ebp right away.
(This destroys %ebp. It means we do not preserve it on return.
It's not causing problems since userspace VDSO code does not
depend on it, and SYSENTER insn can't be sanely used outside of
VDSO).

Syscall code loads 0(%ebp) to %r9. This allows to eliminate one
MOV insn (r9 is a register where arg6 should be for 64-bit ABI),
but on audit/ptrace code paths this requires juggling of r9 and
ebp: (1) ptrace expects arg6 to be in pt_regs->bp;
(2) r9 is callee-clobbered register and needs to be
saved/restored     around calls to C functions.

This patch changes syscall code to load 0(%ebp) to %ebp, making
it more similar to sysenter code. It's a bit smaller:

   text    data     bss     dec     hex filename
   1407       0       0    1407     57f ia32entry.o.before
   1391       0       0    1391     56f ia32entry.o

To preserve ABI compat, we restore ebp on exit.

Run-tested.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1433336169-18964-1-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This macro is small, has only three callsites, and one of them
is slightly different using a conditional parameter.

A few saved lines aren't worth the resulting obfuscation.

Generated machine code is identical.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1433271842-9139-2-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This macro is small, has only four callsites, and one of them is
slightly different using a conditional parameter.

A few saved lines aren't worth the resulting obfuscation.

Generated machine code is identical.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
[ Added comments. ]
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1433271842-9139-1-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

32-bit syscall entry points do not save the complete pt_regs struct,
they leave some fields uninitialized. However, they must be
careful to not leak uninitialized data in pt_regs->r8..r11 to
ptrace users.

CLEAR_RREGS macro is used to zero these fields out when needed.

However, in the int80 code path this zeroing is unconditional.
This patch simplifies it by storing zeroes there right away,
when pt_regs is constructed on stack.

This uses shorter instructions:

   text    data     bss     dec     hex filename
   1423       0       0    1423     58f ia32entry.o.before
   1407       0       0    1407     57f ia32entry.o

Compile-tested.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1433266510-2938-1-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

INTERRUPT_RETURN turns into a jmp instruction.  There's no need
for extra indirection.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/2f2318653dbad284a59311f13f08cea71298fd7c.1433449436.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The wrmsrl_safe macro performs invalid shifts if the value
argument is 32 bits.  This makes it unnecessarily awkward to
write code that puts an unsigned long into an MSR.

Convert it to a real inline function.

For inspiration, see:

  7c74d5b7 ("x86/asm/entry/64: Fix MSR_IA32_SYSENTER_CS MSR value").
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
[ Applied small improvements. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The vsyscall code is entry code too, so move it to arch/x86/entry/vsyscall/.

Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The build time generated syscall definitions are entry code related, move
them into the arch/x86/entry/ directory.

Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

asm/calling.h is private to the entry code, make this more apparent
by moving it to the new arch/x86/entry/ directory.

Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

These are all calling x86 entry code functions, so move them close
to other entry code.

Change lib-y to obj-y: there's no real difference between the two
as we don't really drop any of them during the linking stage, and
obj-y is the more common approach for core kernel object code.

Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Move the ia32entry.S file over into arch/x86/entry/.

Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Create a new directory hierarchy for the low level x86 entry code:

    arch/x86/entry/*

This will host all the low level glue that is currently scattered
all across arch/x86/.

Start with entry_64.S and entry_32.S.

Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

retint_kernel doesn't require %rcx to be pointing to thread info
(anymore?), and the code on the two alternative paths is - not
really surprisingly - identical.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/556C664F020000780007FB64@mail.emea.novell.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Doing so allows adjustments by 128 bytes (occurring for
REMOVE_PT_GPREGS_FROM_STACK 8 uses) to be expressed with a
single byte immediate.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/556C660F020000780007FB60@mail.emea.novell.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

So the dwarf2 annotations in low level assembly code have
become an increasing hindrance: unreadable, messy macros
mixed into some of the most security sensitive code paths
of the Linux kernel.

These debug info annotations don't even buy the upstream
kernel anything: dwarf driven stack unwinding has caused
problems in the past so it's out of tree, and the upstream
kernel only uses the much more robust framepointers based
stack unwinding method.

In addition to that there's a steady, slow bitrot going
on with these annotations, requiring frequent fixups.
There's no tooling and no functionality upstream that
keeps it correct.

So burn down the sick forest, allowing new, healthier growth:

   27 files changed, 350 insertions(+), 1101 deletions(-)

Someone who has the willingness and time to do this
properly can attempt to reintroduce dwarf debuginfo in x86
assembly code plus dwarf unwinding from first principles,
with the following conditions:

 - it should be maximally readable, and maximally low-key to
   'ordinary' code reading and maintenance.

 - find a build time method to insert dwarf annotations
   automatically in the most common cases, for pop/push
   instructions that manipulate the stack pointer. This could
   be done for example via a preprocessing step that just
   looks for common patterns - plus special annotations for
   the few cases where we want to depart from the default.
   We have hundreds of CFI annotations, so automating most of
   that makes sense.

 - it should come with build tooling checks that ensure that
   CFI annotations are sensible. We've seen such efforts from
   the framepointer side, and there's no reason it couldn't be
   done on the dwarf side.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The early_idt_handlers asm code generates an array of entry
points spaced nine bytes apart.  It's not really clear from that
code or from the places that reference it what's going on, and
the code only works in the first place because GAS never
generates two-byte JMP instructions when jumping to global
labels.

Clean up the code to generate the correct array stride (member size)
explicitly. This should be considerably more robust against
screw-ups, as GAS will warn if a .fill directive has a negative
count.  Using '. =' to advance would have been even more robust
(it would generate an actual error if it tried to move
backwards), but it would pad with nulls, confusing anyone who
tries to disassemble the code.  The new scheme should be much
clearer to future readers.

While we're at it, improve the comments and rename the array and
common code.

Binutils may start relaxing jumps to non-weak labels.  If so,
this change will fix our build, and we may need to backport this
change.

Before, on x86_64:

  0000000000000000 <early_idt_handlers>:
     0:   6a 00                   pushq  $0x0
     2:   6a 00                   pushq  $0x0
     4:   e9 00 00 00 00          jmpq   9 <early_idt_handlers+0x9>
                          5: R_X86_64_PC32        early_idt_handler-0x4
  ...
    48:   66 90                   xchg   %ax,%ax
    4a:   6a 08                   pushq  $0x8
    4c:   e9 00 00 00 00          jmpq   51 <early_idt_handlers+0x51>
                          4d: R_X86_64_PC32       early_idt_handler-0x4
  ...
   117:   6a 00                   pushq  $0x0
   119:   6a 1f                   pushq  $0x1f
   11b:   e9 00 00 00 00          jmpq   120 <early_idt_handler>
                          11c: R_X86_64_PC32      early_idt_handler-0x4

After:

  0000000000000000 <early_idt_handler_array>:
     0:   6a 00                   pushq  $0x0
     2:   6a 00                   pushq  $0x0
     4:   e9 14 01 00 00          jmpq   11d <early_idt_handler_common>
  ...
    48:   6a 08                   pushq  $0x8
    4a:   e9 d1 00 00 00          jmpq   120 <early_idt_handler_common>
    4f:   cc                      int3
    50:   cc                      int3
  ...
   117:   6a 00                   pushq  $0x0
   119:   6a 1f                   pushq  $0x1f
   11b:   eb 03                   jmp    120 <early_idt_handler_common>
   11d:   cc                      int3
   11e:   cc                      int3
   11f:   cc                      int3
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: Binutils <binutils@sourceware.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/ac027962af343b0c599cbfcf50b945ad2ef3d7a8.1432336324.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The "movw %ds,%cx" instruction needs a 0x66 prefix, while
"movl %ds,%ecx" does not.

The difference is that latter form (on 64-bit CPUs)
overwrites the entire %ecx, not only its lower half.

But subsequent code doesn't depend on the value of upper
half of %ecx, so we can safely use the shorter instruction.

The new code is also faster than the old one - now we don't
depend on the old value of %ecx, but this code fragment is
not performance-critical so it does not matter much.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1431722346-26585-1-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Make the disassembly look less confusing:

  -- head_64.o.before.asm
  ++ head_64.o.after.asm
   0000000000000120 <early_idt_handler>:
    120:	fc                   	cld
    121:	83 3c 24 02          	cmpl   $0x2,(%rsp)
  - 125:	0f 84 9d 00 00 00    	je     1c8 <is_nmi>
  + 125:	0f 84 9d 00 00 00    	je     1c8 <early_idt_handler+0xa8>
    12b:	83 3d 00 00 00 00 02 	cmpl   $0x2,0x0(%rip)        # 132 <early_idt_handler+0x12>
    132:	74 7e                	je     1b2 <early_idt_handler+0x92>
    134:	ff 05 00 00 00 00    	incl   0x0(%rip)        # 13a <early_idt_handler+0x1a>
  @@ -1198,9 +1198,7 @@ Disassembly of section .init.text:
    1bf:	5a                   	pop    %rdx
    1c0:	59                   	pop    %rcx
    1c1:	58                   	pop    %rax
  - 1c2:	ff 0d 00 00 00 00    	decl   0x0(%rip)        # 1c8 <is_nmi>
  -
  -00000000000001c8 <is_nmi>:
  + 1c2:	ff 0d 00 00 00 00    	decl   0x0(%rip)        # 1c8 <early_idt_handler+0xa8>
    1c8:	48 83 c4 10          	add    $0x10,%rsp
    1cc:	48 cf                	iretq

  -- head_32.o.before.asm
  ++ head_32.o.after.asm
   0000016c <early_idt_handler>:
    16c:  fc                      cld
    16d:  83 3c 24 02             cmpl   $0x2,(%esp)
  - 171:  74 73                   je     1e6 <is_nmi>
  + 171:  74 73                   je     1e6 <ex_entry+0xc>
    173:  36 83 3d 00 00 00 00    cmpl   $0x2,%ss:0x0
    17a:  02
    17b:  74 5a                   je     1d7 <hlt_loop>
  @@ -483,8 +483,6 @@ Disassembly of section .init.text:
    1dd:  59                      pop    %ecx
    1de:  58                      pop    %eax
    1df:  36 ff 0d 00 00 00 00    decl   %ss:0x0
  -
  -000001e6 <is_nmi>:
    1e6:  83 c4 08                add    $0x8,%esp
    1e9:  cf                      iret
    1ea:  66 90                   xchg   %ax,%ax

No functionality change.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1431793079-11153-1-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Conflicts:
	tools/testing/selftests/x86/Makefile
	tools/testing/selftests/x86/run_x86_tests.sh

Packing loops tightly (-falign-loops=1) is beneficial to code size:

     text        data    bss     dec              filename
 12566391        1617840 1089536 15273767         vmlinux.align.16-byte
 12224951        1617840 1089536 14932327         vmlinux.align.1-byte
 11976567        1617840 1089536 14683943         vmlinux.align.1-byte.funcs-1-byte
 11903735        1617840 1089536 14611111         vmlinux.align.1-byte.funcs-1-byte.loops-1-byte

Which reduces the size of the kernel by another 0.6%, so the
the total combined size reduction of the alignment-packing
patches is ~5.5%.

The x86 decoder bandwidth and caching arguments laid out in:

  be6cb027 ("x86: Align jump targets to 1-byte boundaries")

apply to loop alignment as well.

Furtermore, modern CPU uarchs have a loop cache/buffer that
is a L0 cache before even any uop cache, covering a few
dozen most recently executed instructions.

This loop cache generally does not have the 16-byte alignment
restrictions of the uop cache.

Now loop alignment can still be beneficial if:

 - a loop is cache-hot and its surroundings are not.

 - if the loop is so cache hot that the instruction
   flow becomes x86 decoder bandwidth limited

But loop alignment is harmful if:

 - a loop is cache-cold

 - a loop's surroundings are cache-hot as well

 - two cache-hot loops are close to each other

 - if the loop fits into the loop cache

 - if the code flow is not decoder bandwidth limited

and I'd argue that the latter five scenarios are much
more common in the kernel, as our hottest loops are
typically:

 - pointer chasing: this should fit into the loop cache
   in most cases and is typically data cache and address
   generation limited

 - generic memory ops (memset, memcpy, etc.): these generally
   fit into the loop cache as well, and are likewise data
   cache limited.

So this patch packs loop addresses tightly as well.
Acked-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/20150410123017.GB19918@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Pull USB fixes from Greg KH:
 "Here are some USB fixes and new device ids for 4.1-rc4.

  All are pretty minor, and have been in linux-next successfully"

* tag 'usb-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb-storage: Add NO_WP_DETECT quirk for Lacie 059f:0651 devices
  Added another USB product ID for ELAN touchscreen quirks.
  xhci: gracefully handle xhci_irq dead device
  xhci: Solve full event ring by increasing TRBS_PER_SEGMENT to 256
  xhci: fix isoc endpoint dequeue from advancing too far on transaction error
  usb: chipidea: debug: avoid out of bound read
  USB: visor: Match I330 phone more precisely
  USB: pl2303: Remove support for Samsung I330
  USB: cp210x: add ID for KCF Technologies PRN device
  usb: gadget: remove incorrect __init/__exit annotations
  usb: phy: isp1301: work around tps65010 dependency
  usb: gadget: serial: fix re-ordering of tx data
  usb: gadget: hid: Fix static variable usage
  usb: gadget: configfs: Fix interfaces array NULL-termination
  usb: gadget: xilinx: fix devm_ioremap_resource() check
  usb: dwc3: dwc3-omap: correct the register macros

Pull tty/serial fixes from Greg KH:
 "Here's some TTY and serial driver fixes for reported issues.

  All of these have been in linux-next successfully"

* tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  pty: Fix input race when closing
  tty/n_gsm.c: fix a memory leak when gsmtty is removed
  Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open"
  serial: omap: Fix error handling in probe
  earlycon: Revert log warnings

Pull staging / IIO driver fixes from Greg KH:
 "Here's some staging and iio driver fixes to resolve a number of
  reported issues.

  All of these have been in linux-next for a while"

* tag 'staging-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (31 commits)
  iio: light: hid-sensor-prox: Fix memory leak in probe()
  iio: adc: cc10001: Add delay before setting START bit
  iio: adc: cc10001: Fix regulator_get_voltage() return value check
  iio: adc: cc10001: Fix incorrect use of power-up/power-down register
  staging: gdm724x: Correction of variable usage after applying ALIGN()
  iio: adc: cc10001: Fix the channel number mapping
  staging: vt6655: lock MACvWriteBSSIDAddress.
  staging: vt6655: CARDbUpdateTSF bss timestamp correct tsf counter value.
  staging: vt6655: vnt_tx_packet Correct TX order of OWNED_BY_NIC
  staging: vt6655: Fix 80211 control and management status reporting.
  staging: vt6655: implement IEEE80211_TX_STAT_NOACK_TRANSMITTED
  staging: vt6655: device_free_tx_buf use only ieee80211_tx_status_irqsafe
  staging: vt6656: use ieee80211_tx_info to select packet type.
  staging: rtl8712: freeing an ERR_PTR
  staging: sm750: remove incorrect __exit annotation
  iio: kfifo: Set update_needed to false only if a buffer was allocated
  iio: mcp320x: Fix occasional incorrect readings
  iio: accel: mma9553: check input value for activity period
  iio: accel: mma9553: add enable channel for activity
  iio: accel: mma9551_core: prevent buffer overrun
  ...

Pull char/misc fix from Greg KH:
 "Here is one fix, in the extcon subsystem, that resolves a reported
  issue.

  It's been in linux-next for a number of weeks now, sorry for not
  getting it to you sooner"

* tag 'char-misc-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  extcon: usb-gpio: register extcon device before IRQ registration

Pull UML hostfs fix from Richard Weinberger:
 "This contains a single fix for a regression introduced in 4.1-rc1"

* 'for-linus-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  hostfs: Use correct mask for file mode

Pull UBI bufix from Richard Weinberger:
 "This contains a single bug fix for the UBI block driver"

* tag 'upstream-4.1-rc4' of git://git.infradead.org/linux-ubifs:
  UBI: block: Add missing cache flushes

Pull ext4 fixes from Ted Ts'o:
 "Fix a number of ext4 bugs; the most serious of which is a bug in the
  lazytime mount optimization code where we could end up updating the
  timestamps to the wrong inode"

* tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix an ext3 collapse range regression in xfstests
  jbd2: fix r_count overflows leading to buffer overflow in journal recovery
  ext4: check for zero length extent explicitly
  ext4: fix NULL pointer dereference when journal restart fails
  ext4: remove unused function prototype from ext4.h
  ext4: don't save the error information if the block device is read-only
  ext4: fix lazytime optimization

Pull btrfs fixes from Chris Mason:
 "The first commit is a fix from Filipe for a very old extent buffer
  reuse race that triggered a BUG_ON.  It hasn't come up often, I looked
  through old logs at FB and we hit it a handful of times over the last
  year.

  The rest are other corners he hit during testing"

* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix race when reusing stale extent buffers that leads to BUG_ON
  Btrfs: fix race between block group creation and their cache writeout
  Btrfs: fix panic when starting bg cache writeout after IO error
  Btrfs: fix crash after inode cache writeback failure

Pull MIPS fixes from Ralf Baechle:
 "Seven small fixes.  The shortlog below is a good description so no
  need to elaborate.

  It has sat in linux-next and survived the usual automated testing by
  Imagination's test farm"

* 'master' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: tlb-r4k: Fix PG_ELPA comment
  MIPS: Fix up obsolete cpu_set usage
  MIPS: IP32: Fix build errors in reset code in DS1685 platform hook.
  MIPS: KVM: Fix unused variable build warning
  MIPS: traps: remove extra Tainted: line from __show_regs() output
  MIPS: Fix wrong CHECKFLAGS (sparse builds) with GCC 5.1
  MIPS: Fix a preemption issue with thread's FPU defaults

Pull ARC fixes from Vineet Gupta.

* tag 'arc-4.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: inline cache flush toggle helpers
  ARC: With earlycon in use, retire EARLY_PRINTK
  ARC: unbork !LLSC build

Pull ARM SoC fixes from Arnd Bergmann:
 "Nothing frightening this time, just smaller fixes in a number of
  places.

  The other changes contained here are:

   MAINTAINERS file updates:

   - The mach-gemini maintainer is back in action and has a new git tree

   - Krzysztof Kozlowski has volunteered to be a new co-maintainer for
     the samsung platforms

   - updates to the files that belong to Marvell mvebu

  Bug fixes:

   - The largest changes are on omap2, but are only to avoid some
     harmless warnings and to fix reset on omap4

   - a small regression fix on tegra

   - multiple fixes for incorrect IRQ affinity on vexpress

   - the missing system controller on arm64 juno is added

   - one revert of a patch that was accidentally applied twice for
     mach-rockchip

   - two clock related DT fixes for mvebu

   - a workaround for suspend with old DT binaries on new exynos kernels

   - Another fix for suspend on exynos, needs to be backported"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  MAINTAINERS: Add dts entries for some of the Marvell SoCs
  MAINTAINERS: ARM: EXYNOS: Add Krzysztof Kozlowski as co-maintainer
  ARM: EXYNOS: Use of_machine_is_compatible instead of soc_is_exynos4
  ARM: EXYNOS: Fix failed second suspend on Exynos4
  Revert "ARM: rockchip: fix undefined instruction of reset_ctrl_regs"
  ARM: EXYNOS: Fix dereference of ERR_PTR returned by of_genpd_get_from_provider
  ARM: EXYNOS: Don't try to initialize suspend on old DT
  ARM: dts: Add keep-power-in-suspend to WiFi SDIO node for Peach Boards
  ARM: gemini: fix compiler warning due wrong data type
  ARM: vexpress/tc2: Add interrupt-affinity to the PMU node
  ARM: vexpress/ca9: Add interrupt-affinity to the PMU node
  ARM: vexpress/ca9: Add unified-cache property to l2 cache node
  ARM64: juno: add sp810 support and fix sp804 clock frequency
  ARM: Gemini: Maintainers update
  ARM: OMAP2+: Remove bogus struct clk comparison for timer clock
  ARM: dove: Add clock-names to CuBox Si5351 clk generator
  ARM: AM33xx+: hwmod: re-use omap4 implementations for reset functionality
  ARM: OMAP4+: PRM: add support for passing status register/bit info to reset
  ARM: AM43xx: hwmod: add VPFE hwmod entries
  ARM: mvebu: Fix the main PLL frequency on Armada 375, 38x and 39x SoCs
  ...

Pull thermal fixes from Zhang Rui:
 "Specifics:

   - fix an issue in intel_powerclamp driver that idle injection target
     is not accurately maintained on newer Intel CPUs.  Package C8 to
     C10 states are introduced on these CPUs but they were not included
     in the package c-state residency calculation.  From Jacob Pan.

   - fix a problem that package c-state idle injection was missing on
     Broadwell server, by adding its id to intel_powerclamp driver.
     From Jacob Pan.

   - a couple of small fixes and cleanups from Joe Perches, Mathias
     Krause, Dan Carpenter and Anand Moon"

* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  tools/thermal: tmon: fixed the 'make install' command
  thermal: rockchip: fix an error code
  thermal/powerclamp: fix missing newer package c-states
  thermal/intel_powerclamp: add id for broadwell server
  thermal/intel_powerclamp: add __init / __exit annotations
  thermal: Use bool function return values of true/false not 1/0

Merge tag 'linux-kselftest-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "Urgent fix for Kselftest regression introduced in 4.1-rc1 by the new
  x86 test due to its hard dependency on 32-bit build environment.

  A set of 5 patches fix the make kselftest run and kselftest install"

* tag 'linux-kselftest-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests, x86: Rework x86 target architecture detection
  selftests, x86: Remove useless run_tests rule
  selftests/x86: install tests
  selftest/x86: have no dependency on all when cross building
  selftest/x86: build both bitnesses

Pull parisc fixes from Helge Deller:
 "One important patch which fixes crashes due to stack randomization on
  architectures where the stack grows upwards (currently parisc and
  metag only).

  This bug went unnoticed on parisc since kernel 3.14 where the flexible
  mmap memory layout support was added by commit 9dabf60d.  The
  changes in fs/exec.c are inside an #ifdef CONFIG_STACK_GROWSUP section
  and will not affect other platforms.

  The other two patches rename args of the kthread_arg() function and
  fixes a printk output"

* 'parisc-4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc,metag: Fix crashes due to stack randomization on stack-grows-upwards architectures
  parisc: copy_thread(): rename 'arg' argument to 'kthread_arg'
  parisc: %pf is only for function pointers

The ELPA bit in PageGrain is all about large *physical* addresses, so
correct the reference to "large virtual address" in the comment above
where it is set for MIPS64.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10038/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>