- 25 5月, 2008 1 次提交
-
-
由 Alexey Starikovskiy 提交于
-
- 01 5月, 2008 4 次提交
-
-
由 Linus Torvalds 提交于
So Ingo finally did figure out why UML broke with this option: UML passes gcc the -fno-unit-at-a-time flag, and apparently that wreaks havoc with gcc's inlining. We could turn off -fno-unit-at-a-time for UML for gcc4+ (which is what x86 does), but there's bad blood about this whole option, and it does show that the thing is just fragile as heck. So let tempers cool, and disable the thing, and we can revisit the decision later. Cc: Adrian Bunk <bunk@kernel.org> Cc: David Miller <davem@davemloft.net> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Molnar 提交于
Switch back to 8K stacks as the safer default. Out-of-memory situations are less problematic than silent and hard to debug stack corruption. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
default to inline optimizing off. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Andrew noticed that OPTIMIZE_INLINING appeared in the toplevel menu - fix it. Reported-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 26 4月, 2008 1 次提交
-
-
由 Ingo Molnar 提交于
add CONFIG_OPTIMIZE_INLINING=y. allow gcc to optimize the kernel image's size by uninlining functions that have been marked 'inline'. Previously gcc was forced by Linux to always-inline these functions via a gcc attribute: #define inline inline __attribute__((always_inline)) Especially when the user has already selected CONFIG_OPTIMIZE_FOR_SIZE=y this can make a huge difference in kernel image size (using a standard Fedora .config): text data bss dec hex filename 5613924 562708 3854336 10030968 990f78 vmlinux.before 5486689 562708 3854336 9903733 971e75 vmlinux.after that's a 2.3% text size reduction (!). Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 25 4月, 2008 2 次提交
-
-
由 Ingo Molnar 提交于
default to the old semantics. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arjan van de Ven 提交于
This patch introduces a restriction on /dev/mem: Only non-memory can be read or written unless the newly introduced config option is set. The X server needs access to /dev/mem for the PCI space, but it doesn't need access to memory; both the file permissions and SELinux permissions of /dev/mem just make X effectively super-super powerful. With the exception of the BIOS area, there's just no valid app that uses /dev/mem on actual memory. Other popular users of /dev/mem are rootkits and the like. (note: mmap access of memory via /dev/mem was already not allowed since a really long time) People who want to use /dev/mem for kernel debugging can enable the config option. The restrictions of this patch have been in the Fedora and RHEL kernels for at least 4 years without any problems. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 17 4月, 2008 4 次提交
-
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
These new controls toggle experimental support for a new CPU feature, the straightforward extension of largepages from the pmd level to the pud level, which allows 1GB (kernel) TLBs instead of 2MB TLBs. Turn it off by default, as this code has not been tested well enough yet. Use the CONFIG_DIRECT_GBPAGES=y .config option or gbpages on the boot line can be used to enable it. If enabled in the .config then nogbpages boot option disables it. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 H. Peter Anvin 提交于
Clean up the page table dumper (fix boundary conditions, table driven address ranges, some formatting changes since it is no longer using the kernel log but a separate virtual file), and generalize to 32 bits. [ mingo@elte.hu: x86: fix the pagetable dumper ] Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Arjan van de Ven 提交于
This patch adds code to the kernel to have an (optional) /proc/kernel_page_tables debug file that basically dumps the kernel pagetables; this allows us kernel developers to verify that nothing fishy is going on and that the various mappings are set up correctly. This was quite useful in finding various change_page_attr() bugs, and is very likely to be useful in the future as well. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Cc: mingo@elte.hu Cc: tglx@tglx.de Cc: hpa@zytor.com Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 19 2月, 2008 1 次提交
-
-
由 Ingo Molnar 提交于
change back the IO delay to 0x80. Alan says that 0xed is known to break some older boxes, and given that the get-rid-of-outb-APIs efforts are well underway we should just let them be finished. Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 10 2月, 2008 1 次提交
-
-
由 Thomas Gleixner 提交于
Now, that the page pool is in place we can enable DEBUG_PAGEALLOC on 64bit. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 07 2月, 2008 1 次提交
-
-
由 Ingo Molnar 提交于
delay the CPA self-test so that any impact (corruption) of user-space pagetables can be triggered. Repeat the test every 30 seconds. this would have prevented the bug fixed by 8cb2a7c1, at its source. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 30 1月, 2008 14 次提交
-
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
make CONFIG_DEBUG_PAGEALLOC universally available. CONFIG_HIBERNATION and CONFIG_HUGETLBFS was disabling it, for no particular reason. If there are any unfixed bugs here we'll fix it, but do not disable vital debugging facilities like that .. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
enable CONFIG_DEBUG_PAGEALLOC=y on 64-bit kernels too. preliminary testing shows that it's working fine. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andi Kleen 提交于
When CONFIG_DEBUG_RODATA is enabled undo the ro mapping and redo it again. This gives some simple testing for change_page_attr(). Signed-off-by: NAndi Kleen <ak@suse.de> Acked-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
fix kconfig text and make DEBUG_RODATA default. this helps debugging quite a bit. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 travis@sgi.com 提交于
Provide a means to trap usages of per_cpu map variables before they are setup. Define CONFIG_DEBUG_PER_CPU_MAPS to activate. Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Enable CONFIG_EMBEDDED to select CONFIG_EARLY_PRINTK on 64-bit as well. saves ~2K: text data bss dec hex filename 7290283 3672091 1907848 12870222 c4624e vmlinux.before 7288373 3671795 1907848 12868016 c459b0 vmlinux.after Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Huang, Ying 提交于
This patch export the boot parameters via debugfs for debugging. The files added are as follow: boot_params/data : binary file for struct boot_params boot_params/version : boot protocol version This patch is based on 2.6.24-rc5-mm1 and has been tested on i386 and x86_64 platform. This patch is based on the Peter Anvin's proposal. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
Combine the 32 and 64 bit specific Makefiles in one file. While doing so link order was (almost) preserved on 32 bit but on 64 bit link order changed a lot. Patch was checked with defconfig + allyesconfig builds. The same .o files were linked in these configurations. To keep readability of the Makefiles a few Kconfig symbols was added/modified and it was checked that they were not used anywhere else. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
make io_delay=0xed the default. This frees up port 0x80 which is a debug port on some machines and locks up certain laptops. Testing only for now. Try the io_delay=0x80 boot option if this does not work for you. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
various changes to the in_p/out_p delay details: - add the io_delay=none method - make each method selectable from the kernel config - simplify the delay code a bit by getting rid of an indirect function call - add the /proc/sys/kernel/io_delay_type sysctl - change 'io_delay=standard|alternate' to io_delay=0x80 and io_delay=0xed - make the io delay config not depend on CONFIG_DEBUG_KERNEL Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Tested-by: N"David P. Reed" <dpreed@reed.com>
-
由 Rene Herman 提交于
x86: provide a DMI based port 0x80 I/O delay override. Certain (HP) laptops experience trouble from our port 0x80 I/O delay writes. This patch provides for a DMI based switch to the "alternate diagnostic port" 0xed (as used by some BIOSes as well) for these. David P. Reed confirmed that port 0xed works for him and provides a proper delay. The symptoms of _not_ working are a hanging machine, with "hwclock" use being a direct trigger. Earlier versions of this attempted to simply use udelay(2), with the 2 being a value tested to be a nicely conservative upper-bound with help from many on the linux-kernel mailinglist but that approach has two problems. First, pre-loops_per_jiffy calibration (which is post PIT init while some implementations of the PIT are actually one of the historically problematic devices that need the delay) udelay() isn't particularly well-defined. We could initialise loops_per_jiffy conservatively (and based on CPU family so as to not unduly delay old machines) which would sort of work, but... Second, delaying isn't the only effect that a write to port 0x80 has. It's also a PCI posting barrier which some devices may be explicitly or implicitly relying on. Alan Cox did a survey and found evidence that additionally some drivers may be racy on SMP without the bus locking outb. Switching to an inb() makes the timing too unpredictable and as such, this DMI based switch should be the safest approach for now. Any more invasive changes should get more rigid testing first. It's moreover only very few machines with the problem and a DMI based hack seems to fit that situation. This also introduces a command-line parameter "io_delay" to override the DMI based choice again: io_delay=<standard|alternate> where "standard" means using the standard port 0x80 and "alternate" port 0xed. This retains the udelay method as a config (CONFIG_UDELAY_IO_DELAY) and command-line ("io_delay=udelay") choice for testing purposes as well. This does not change the io_delay() in the boot code which is using the same port 0x80 I/O delay but those do not appear to be a problem as David P. Reed reported the problem was already gone after using the udelay version. He moreover reported that booting with "acpi=off" also fixed things and seeing as how ACPI isn't touched until after this DMI based I/O port switch I believe it's safe to leave the ones in the boot code be. The DMI strings from David's HP Pavilion dv9000z are in there already and we need to get/verify the DMI info from other machines with the problem, notably the HP Pavilion dv6000z. This patch is partly based on earlier patches from Pavel Machek and David P. Reed. Signed-off-by: NRene Herman <rene.herman@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 30 10月, 2007 3 次提交
-
-
由 Adrian Bunk 提交于
This patch removes the dead X86_REMOTE_DEBUG option. Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Adrian Bunk 提交于
This patch merges the x86_64 EARLY_PRINTK option into the i386 one. Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Joerg Roedel 提交于
This patch renames the IOMMU config option to GART_IOMMU because in fact it means the GART and not general support for an IOMMU on x86. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Acked-by: NMuli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 26 10月, 2007 1 次提交
-
-
由 Randy Dunlap 提交于
Adding proper dependencies so the two Kconfig.debug files are now identical and move the result file to x86. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 30 7月, 2007 1 次提交
-
-
由 Rafael J. Wysocki 提交于
Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid confusion (among other things, with CONFIG_SUSPEND introduced in the next patch). Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 6月, 2007 1 次提交
-
-
由 Arjan van de Ven 提交于
Do not mark the kernel text read only if KPROBES is in the kernel; kprobes needs to hot-patch the kernel text to insert it's instrumentation. In this case, only mark the .rodata segment as read only. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Tested-by: NS. P. Prasanna <prasanna@in.ibm.com> Cc: Andi Kleen <ak@suse.de> Cc: William Cohen <wcohen@redhat.com> Cc: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 6月, 2007 1 次提交
-
-
由 Andi Kleen 提交于
Right now Kprobes cannot write to the write protected kernel text when DEBUG_RODATA is enabled. Disallow this in Kconfig for now. Temporary fix for 2.6.22. In .23 add code to temporarily unprotect it. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 5月, 2007 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Remove CONFIG_DEBUG_PARAVIRT. When inlining code, this option attempts to trash registers in the patch-site's "clobber" field, on the grounds that this should find bugs with incorrect clobbers. Unfortunately, the clobber field really means "registers modified by this patch site", which includes return values. Because of this, this option has outlived its usefulness, so remove it. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Rusty Russell <rusty@rustcorp.com.au>
-
- 13 2月, 2007 1 次提交
-
-
由 Zachary Amsden 提交于
Deliberate register clobber around performance critical inline code is great for testing, bad to leave on by default. Many people ship with DEBUG_KERNEL turned on, so stop making DEBUG_PARAVIRT default on. Signed-off-by: NZachary Amsden <zach@vmware.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
- 07 12月, 2006 1 次提交
-
-
由 Rusty Russell 提交于
It turns out that the most called ops, by several orders of magnitude, are the interrupt manipulation ops. These are obvious candidates for patching, so mark them up and create infrastructure for it. The method used is that the ops structure has a patch function, which is called for each place which needs to be patched: this returns a number of instructions (the rest are NOP-padded). Usually we can spare a register (%eax) for the binary patched code to use, but in a couple of critical places in entry.S we can't: we make the clobbers explicit at the call site, and manually clobber the allowed registers in debug mode as an extra check. And: Don't abuse CONFIG_DEBUG_KERNEL, add CONFIG_DEBUG_PARAVIRT. And: AK: Fix warnings in x86-64 alternative.c build And: AK: Fix compilation with defconfig And: ^From: Andrew Morton <akpm@osdl.org> Some binutlises still like to emit references to __stop_parainstructions and __start_parainstructions. And: AK: Fix warnings about unused variables when PARAVIRT is disabled. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NZachary Amsden <zach@vmware.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
- 04 7月, 2006 1 次提交
-
-
由 Ingo Molnar 提交于
Add irqflags-tracing support to i386. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-