It was scheduled to be removed for a long time.

Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netfilter@vger.kernel.org
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Add IPv6 support to the SIP NAT helper. There are no functional differences
to IPv4 NAT, just different formats for addresses.
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Signed-off-by: NPatrick McHardy <kaber@trash.net>

Signed-off-by: NPatrick McHardy <kaber@trash.net>

Convert the IPv4 NAT implementation to a protocol independent core and
address family specific modules.
Signed-off-by: NPatrick McHardy <kaber@trash.net>

In "9cb01766 netfilter: add glue code to integrate nfnetlink_queue and ctnetlink"
the compilation with NF_CONNTRACK disabled is broken. This patch fixes this
issue.

I have moved the conntrack part into nfnetlink_queue_ct.c to avoid
peppering the entire nfnetlink_queue.c code with ifdefs.

I also needed to rename nfnetlink_queue.c to nfnetlink_queue_pkt.c
to update the net/netfilter/Makefile to support conditional compilation
of the conntrack integration.

This patch also adds CONFIG_NETFILTER_QUEUE_CT in case you want to explicitly
disable the integration between nf_conntrack and nfnetlink_queue.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch fixes the compilation of net/netfilter/nfnetlink_cthelper.c
if CONFIG_NF_CONNTRACK is not set.

This patch also moves the definition of the cthelper infrastructure to
the scope of NF_CONNTRACK things.

I have also renamed NETFILTER_NETLINK_CTHELPER by NF_CT_NETLINK_HELPER,
to use similar names to other nf_conntrack_netlink extensions. Better now
that this has been only for two days in David's tree.

Two new dependencies have been added:

* NF_CT_NETLINK
* NETFILTER_NETLINK_QUEUE

Since these infrastructure requires both ctnetlink and nfqueue.
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

There are good reasons to supports helpers in user-space instead:

* Rapid connection tracking helper development, as developing code
  in user-space is usually faster.

* Reliability: A buggy helper does not crash the kernel. Moreover,
  we can monitor the helper process and restart it in case of problems.

* Security: Avoid complex string matching and mangling in kernel-space
  running in privileged mode. Going further, we can even think about
  running user-space helpers as a non-root process.

* Extensibility: It allows the development of very specific helpers (most
  likely non-standard proprietary protocols) that are very likely not to be
  accepted for mainline inclusion in the form of kernel-space connection
  tracking helpers.

This patch adds the infrastructure to allow the implementation of
user-space conntrack helpers by means of the new nfnetlink subsystem
`nfnetlink_cthelper' and the existing queueing infrastructure
(nfnetlink_queue).

I had to add the new hook NF_IP6_PRI_CONNTRACK_HELPER to register
ipv[4|6]_helper which results from splitting ipv[4|6]_confirm into
two pieces. This change is required not to break NAT sequence
adjustment and conntrack confirmation for traffic that is enqueued
to our user-space conntrack helpers.

Basic operation, in a few steps:

1) Register user-space helper by means of `nfct':

 nfct helper add ftp inet tcp

 [ It must be a valid existing helper supported by conntrack-tools ]

2) Add rules to enable the FTP user-space helper which is
   used to track traffic going to TCP port 21.

For locally generated packets:

 iptables -I OUTPUT -t raw -p tcp --dport 21 -j CT --helper ftp

For non-locally generated packets:

 iptables -I PREROUTING -t raw -p tcp --dport 21 -j CT --helper ftp

3) Run the test conntrackd in helper mode (see example files under
   doc/helper/conntrackd.conf

 conntrackd

4) Generate FTP traffic going, if everything is OK, then conntrackd
   should create expectations (you can check that with `conntrack':

 conntrack -E expect

    [NEW] 301 proto=6 src=192.168.1.136 dst=130.89.148.12 sport=0 dport=54037 mask-src=255.255.255.255 mask-dst=255.255.255.255 sport=0 dport=65535 master-src=192.168.1.136 master-dst=130.89.148.12 sport=57127 dport=21 class=0 helper=ftp
[DESTROY] 301 proto=6 src=192.168.1.136 dst=130.89.148.12 sport=0 dport=54037 mask-src=255.255.255.255 mask-dst=255.255.255.255 sport=0 dport=65535 master-src=192.168.1.136 master-dst=130.89.148.12 sport=57127 dport=21 class=0 helper=ftp

This confirms that our test helper is receiving packets including the
conntrack information, and adding expectations in kernel-space.

The user-space helper can also store its private tracking information
in the conntrack structure in the kernel via the CTA_HELP_INFO. The
kernel will consider this a binary blob whose layout is unknown. This
information will be included in the information that is transfered
to user-space via glue code that integrates nfnetlink_queue and
ctnetlink.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The target allows you to create rules in the "raw" and "mangle" tables
which set the skbuff mark by means of hash calculation within a given
range. The nfmark can influence the routing method (see "Use netfilter
MARK value as routing key") and can also be used by other subsystems to
change their behaviour.

[ Part of this patch has been refactorized and modified by Pablo Neira Ayuso ]
Signed-off-by: NHans Schillstrom <hans.schillstrom@ericsson.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch adds the timeout extension, which allows you to attach
specific timeout policies to flows.

This extension is only used by the template conntrack.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch adds the infrastructure to add fine timeout tuning
over nfnetlink. Now you can use the NFNL_SUBSYS_CTNETLINK_TIMEOUT
subsystem to create/delete/dump timeout objects that contain some
specific timeout policy for one flow.

The follow up patches will allow you attach timeout policy object
to conntrack via the CT target and the conntrack extension
infrastructure.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

ipt_LOG and ip6_LOG have a lot of common code, merge them
to reduce duplicate code.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

warning: (NETFILTER_XT_MATCH_NFACCT) selects NETFILTER_NETLINK_ACCT which has
unmet direct dependencies (NET && INET && NETFILTER && NETFILTER_ADVANCED)

and then

ERROR: "nfnetlink_subsys_unregister" [net/netfilter/nfnetlink_acct.ko] undefined!
ERROR: "nfnetlink_subsys_register" [net/netfilter/nfnetlink_acct.ko] undefined!
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using /proc/net/nf_conntrack has been deprecated in favour of the
conntrack(8) tool.
Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Prepare the ECN match for augmentation by an IPv6 counterpart. Since
no symbol dependencies to ipv6.ko are added, having a single ecn match
module is the more so welcome.
Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch adds the match that allows to perform extended
accounting. It requires the new nfnetlink_acct infrastructure.

 # iptables -I INPUT -p tcp --sport 80 -m nfacct --nfacct-name http-traffic
 # iptables -I OUTPUT -p tcp --dport 80 -m nfacct --nfacct-name http-traffic
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

We currently have two ways to account traffic in netfilter:

- iptables chain and rule counters:

 # iptables -L -n -v
Chain INPUT (policy DROP 3 packets, 867 bytes)
 pkts bytes target     prot opt in     out     source               destination
    8  1104 ACCEPT     all  --  lo     *       0.0.0.0/0            0.0.0.0/0

- use flow-based accounting provided by ctnetlink:

 # conntrack -L
tcp      6 431999 ESTABLISHED src=192.168.1.130 dst=212.106.219.168 sport=58152 dport=80 packets=47 bytes=7654 src=212.106.219.168 dst=192.168.1.130 sport=80 dport=58152 packets=49 bytes=66340 [ASSURED] mark=0 use=1

While trying to display real-time accounting statistics, we require
to pool the kernel periodically to obtain this information. This is
OK if the number of flows is relatively low. However, in case that
the number of flows is huge, we can spend a considerable amount of
cycles to iterate over the list of flows that have been obtained.

Moreover, if we want to obtain the sum of the flow accounting results
that match some criteria, we have to iterate over the whole list of
existing flows, look for matchings and update the counters.

This patch adds the extended accounting infrastructure for
nfnetlink which aims to allow displaying real-time traffic accounting
without the need of complicated and resource-consuming implementation
in user-space. Basically, this new infrastructure allows you to create
accounting objects. One accounting object is composed of packet and
byte counters.

In order to manipulate create accounting objects, you require the
new libnetfilter_acct library. It contains several examples of use:

libnetfilter_acct/examples# ./nfacct-add http-traffic
libnetfilter_acct/examples# ./nfacct-get
http-traffic = { pkts = 000000000000,   bytes = 000000000000 };

Then, you can use one of this accounting objects in several iptables
rules using the new nfacct match (which comes in a follow-up patch):

 # iptables -I INPUT -p tcp --sport 80 -m nfacct --nfacct-name http-traffic
 # iptables -I OUTPUT -p tcp --dport 80 -m nfacct --nfacct-name http-traffic

The idea is simple: if one packet matches the rule, the nfacct match
updates the counters.

Thanks to Patrick McHardy, Eric Dumazet, Changli Gao for reviewing and
providing feedback for this contribution.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

firewalld in Fedora 16 needs this.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Distributions are using this in their default scripts, so don't hide
them behind the advanced setting.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are numerous broken references to Documentation files (in other
Documentation files, in comments, etc.). These broken references are
caused by typo's in the references, and by renames or removals of the
Documentation files. Some broken references are simply odd.

Fix these broken references, sometimes by dropping the irrelevant text
they were part of.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This avoids pulling in the ipv6 module when using (ipv4-only) iptables
-m addrtype.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

The kernel will refuse certain types that do not work in ipv6 mode.
We can then add these features incrementally without risk of userspace
breakage.
Signed-off-by: NFlorian Westphal <fwestphal@astaro.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Followup patch will add ipv6 support.

ipt_addrtype.h is retained for compatibility reasons, but no longer used
by the kernel.
Signed-off-by: NFlorian Westphal <fwestphal@astaro.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Add a new 'devgroup' match to match on the device group of the
incoming and outgoing network device of a packet.
Signed-off-by: NPatrick McHardy <kaber@trash.net>

The patch adds the combined module of the "SET" target and "set" match
to netfilter. Both the previous and the current revisions are supported.
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

The patch adds the IP set core support to the kernel.

The IP set core implements a netlink (nfnetlink) based protocol by which
one can create, destroy, flush, rename, swap, list, save, restore sets,
and add, delete, test elements from userspace. For simplicity (and backward
compatibilty and for not to force ip(6)tables to be linked with a netlink
library) reasons a small getsockopt-based protocol is also kept in order
to communicate with the ip(6)tables match and target.

The netlink protocol passes all u16, etc values in network order with
NLA_F_NET_BYTEORDER flag. The protocol enforces the proper use of the
NLA_F_NESTED and NLA_F_NET_BYTEORDER flags.

For other kernel subsystems (netfilter match and target) the API contains
the functions to add, delete and test elements in sets and the required calls
to get/put refereces to the sets before those operations can be performed.

The set types (which are implemented in independent modules) are stored
in a simple RCU protected list. A set type may have variants: for example
without timeout or with timeout support, for IPv4 or for IPv6. The sets
(i.e. the pointers to the sets) are stored in an array. The sets are
identified by their index in the array, which makes possible easy and
fast swapping of sets. The array is protected indirectly by the nfnl
mutex from nfnetlink. The content of the sets are protected by the rwlock
of the set.

There are functional differences between the add/del/test functions
for the kernel and userspace:

- kernel add/del/test: works on the current packet (i.e. one element)
- kernel test: may trigger an "add" operation  in order to fill
  out unspecified parts of the element from the packet (like MAC address)
- userspace add/del: works on the netlink message and thus possibly
  on multiple elements from the IPSET_ATTR_ADT container attribute.
- userspace add: may trigger resizing of a set
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

This patch adds flow-based timestamping for conntracks. This
conntrack extension is disabled by default. Basically, we use
two 64-bits variables to store the creation timestamp once the
conntrack has been confirmed and the other to store the deletion
time. This extension is disabled by default, to enable it, you
have to:

echo 1 > /proc/sys/net/netfilter/nf_conntrack_timestamp

This patch allows to save memory for user-space flow-based
loogers such as ulogd2. In short, ulogd2 does not need to
keep a hashtable with the conntrack in user-space to know
when they were created and destroyed, instead we use the
kernel timestamp. If we want to have a sane IPFIX implementation
in user-space, this nanosecs resolution timestamps are also
useful. Other custom user-space applications can benefit from
this via libnetfilter_conntrack.

This patch modifies the /proc output to display the delta time
in seconds since the flow start. You can also obtain the
flow-start date by means of the conntrack-tools.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Adding support for SNMP broadcast connection tracking. The SNMP
broadcast requests are now paired with the SNMP responses.
Thus allowing using SNMP broadcasts with firewall enabled.

Please refer to the following conversation:
http://marc.info/?l=netfilter-devel&m=125992205006600&w=2

Patrick McHardy wrote:
> > The best solution would be to add generic broadcast tracking, the
> > use of expectations for this is a bit of abuse.
> > The second best choice I guess would be to move the help() function
> > to a shared module and generalize it so it can be used for both.
This patch implements the "second best choice".

Since the netbios-ns conntrack module uses the same helper
functionality as the snmp, only one helper function is added
for both snmp and netbios-ns modules into the new object -
nf_conntrack_broadcast.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

NFLOG already does the same thing for NETFILTER_NETLINK_LOG.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

This patch adds a new netfilter target which creates audit records
for packets traversing a certain chain.

It can be used to record packets which are rejected administraively
as follows:

  -N AUDIT_DROP
  -A AUDIT_DROP -j AUDIT --type DROP
  -A AUDIT_DROP -j DROP

a rule which would typically drop or reject a packet would then
invoke the new chain to record packets before dropping them.

  -j AUDIT_DROP

The module is protocol independant and works for iptables, ip6tables
and ebtables.

The following information is logged:
 - netfilter hook
 - packet length
 - incomming/outgoing interface
 - MAC src/dst/proto for ethernet packets
 - src/dst/protocol address for IPv4/IPv6
 - src/dst port for TCP/UDP/UDPLITE
 - icmp type/code

Cc: Patrick McHardy <kaber@trash.net>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: NThomas Graf <tgraf@redhat.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Fix dependencies of netfilter realm match: it depends on NET_CLS_ROUTE,
which itself depends on NET_SCHED; this dependency is missing from netfilter.

Since matching on realms is also useful without having NET_SCHED enabled and
the option really only controls whether the tclassid member is included in
route and dst entries, rename the config option to IP_ROUTE_CLASSID and move
it outside of traffic scheduling context to get rid of the NET_SCHED dependeny.
Reported-by: NVladis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

One of the previous tproxy related patches split IPv6 defragmentation and
connection tracking, but did not correctly add Kconfig stanzas to handle the
new dependencies correctly. This patch fixes that by making the config options
mirror the setup we have for IPv4: a distinct config option for defragmentation
that is automatically selected by both connection tracking and
xt_TPROXY/xt_socket.

The patch also changes the #ifdefs enclosing IPv6 specific code in xt_socket
and xt_TPROXY: we only compile these in case we have ip6tables support enabled.
Signed-off-by: NKOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In some situations a CPU match permits a better spreading of
connections, or select targets only for a given cpu.

With Remote Packet Steering or multiqueue NIC and appropriate IRQ
affinities, we can distribute trafic on available cpus, per session.
(all RX packets for a given flow is handled by a given cpu)

Some legacy applications being not SMP friendly, one way to scale a
server is to run multiple copies of them.

Instead of randomly choosing an instance, we can use the cpu number as a
key so that softirq handler for a whole instance is running on a single
cpu, maximizing cache effects in TCP/UDP stacks.

Using NAT for example, a four ways machine might run four copies of
server application, using a separate listening port for each instance,
but still presenting an unique external port :

iptables -t nat -A PREROUTING -p tcp --dport 80 -m cpu --cpu 0 \
        -j REDIRECT --to-port 8080

iptables -t nat -A PREROUTING -p tcp --dport 80 -m cpu --cpu 1 \
        -j REDIRECT --to-port 8081

iptables -t nat -A PREROUTING -p tcp --dport 80 -m cpu --cpu 2 \
        -j REDIRECT --to-port 8082

iptables -t nat -A PREROUTING -p tcp --dport 80 -m cpu --cpu 3 \
        -j REDIRECT --to-port 8083
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

This implements the kernel-space side of the netfilter matcher xt_ipvs.

[ minor fixes by Simon Horman <horms@verge.net.au> ]
Signed-off-by: NHannes Eder <heder@google.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>
[ Patrick: added xt_ipvs.h to Kbuild ]
Signed-off-by: NPatrick McHardy <kaber@trash.net>

This adds a `CHECKSUM' target, which can be used in the iptables mangle
table.

You can use this target to compute and fill in the checksum in
a packet that lacks a checksum.  This is particularly useful,
if you need to work around old applications such as dhcp clients,
that do not work well with checksum offloads, but don't want to
disable checksum offload in your device.

The problem happens in the field with virtualized applications.
For reference, see Red Hat bz 605555, as well as
http://www.spinics.net/lists/kvm/msg37660.html

Typical expected use (helps old dhclient binary running in a VM):
iptables -A POSTROUTING -t mangle -p udp --dport bootpc \
	-j CHECKSUM --checksum-fill

Includes fixes by Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

CONFIG_NF_CT_ACCT has been deprecated for awhile and
was originally scheduled for removal by 2.6.29.

Removing support for this config option also stops
this deprecation warning message in the kernel log.

[   61.669627] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   61.669850] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   61.669852] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[   61.669853] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Signed-off-by: NTim Gardner <tim.gardner@canonical.com>
[Patrick: changed default value to 0]
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Destination was spelled wrong in KConfig.
Signed-off-by: NArnd Hannemann <hannemann@nets.rwth-aachen.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

This patch implements an idletimer Xtables target that can be used to
identify when interfaces have been idle for a certain period of time.

Timers are identified by labels and are created when a rule is set with a new
label.  The rules also take a timeout value (in seconds) as an option.  If
more than one rule uses the same timer label, the timer will be restarted
whenever any of the rules get a hit.

One entry for each timer is created in sysfs.  This attribute contains the
timer remaining for the timer to expire.  The attributes are located under
the xt_idletimer class:

/sys/class/xt_idletimer/timers/<label>

When the timer expires, the target module sends a sysfs notification to the
userspace, which can then decide what to do (eg. disconnect to save power).

Cc: Timo Teras <timo.teras@iki.fi>
Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>