Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer asics use different registers so abstract it.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: agd: integrate Christian's comments.
v3: print error message if call fails
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This lets each asic set whichever flags it supports.
Signed-off-by: NAlex Xie <AlexBin.Xie@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set asic specific gart pte flags in the gmc IP module for
each asic.
Signed-off-by: NAlex Xie <AlexBin.Xie@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This will be used for newer asics.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Necessary for new asics.
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The contextID field (formerly known as src_data) of the IH
vector stores client specific information about an interrupt.
It was expanded from 32 bits to 128 on newer asics.  Expand the
src_id field to handle this.
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer asics have a two levels of irq ids now:
client id - the IP
src id - the interrupt src within the IP

v2: integrated Christian's comments.
v3: fix rebase fail in SI and CIK
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Reviewed-by: NKen Wang <Qingqing.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer asics need 64 bit doorbells.

v2: fix comment (Nils)
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer asics need 64 bit writeback slots.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer asics need 64 bit wptrs.  If the wptr is now
smaller than the rptr that doesn't indicate a wrap-around
anymore.

v2: integrate Christian's comments.
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: agd: move apertures to mc structure
Signed-off-by: NFlora Cui <Flora.Cui@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Again no apparent explanation for the split except hysterical raisins.
Merging them also makes it a bit more obviuos what's going on wrt the
runtime pm refdancing.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Again no apparent explanation for the split except hysterical raisins.
Merging them also makes it a bit more obviuos what's going on wrt the
runtime pm refdancing.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This information is intended to provide the required data to associate
amdgpu tracepoints with their corresponding dma_fence_* events.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Most of the traces have uniform format except for two of them. Having
all the traces match makes it simple to run awk on the ftrace output.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Because different HWs have different definition for CE & DE meta
data, follow mqd design to move the structures to vi_structs.h.

And change the prefix from amdgpu to vi as the structures is only
for VI family.
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NJunshan Fang <Junshan.Fang@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Was missed when polaris12 support was added.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Not used in a while.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NKen Wang <Qingqing.Wang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Disable avfs to make voltage change take effect.
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There is no need to repeat information that printed by PCI core at boot time.

Besides that printing was potentially wrong since resource_size_t might be
bigger than 32 bits and there is a dedicated specifier for such type, i.e.
%pap. Someone can fix it and use even better approach, i.e. %pR.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: fix merge error.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NXiaojie Yuan <Xiaojie.Yuan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We completely bypass the HDP now.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use a more common logging style.

Miscellanea:

o Coalesce formats and realign arguments
o Neaten a few macros now using pr_<level>
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Using 'printk("\n")' is not preferred anymore and
using printk to continue logging messages now produces
multiple line logging output unless the continuations
use KERN_CONT.

Convert these uses to appropriately use pr_cont or a
single printk where possible.

Miscellanea:

o Use a temporary const char * instead of multiple printks
o Remove trailing space from logging by using a leading space instead
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There still seem to be some blocks that make accesses
in the lower part of the address space.  This works around
this.
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Program the VCE BAR and offsets properly.  The current code
was carried over from a limitation from older VCE versions.
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To enable eventual removal of pr_warning

This makes pr_warn use consistent for drivers/gpu

Prior to this patch, there were 15 uses of pr_warning and
20 uses of pr_warn in drivers/gpu
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.orgamd-gfx@lists.freedesktop.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Aux transfers always fail with non-zero status flags when there's
nothing connected on the port, so we don't usually need to see all of
the debugging information from it. Also, we try reprobing a -lot-, so
without ratelimiting most of the kernel log is filled up with messages
from radeon_dp_aux_transfer_native.
Signed-off-by: NLyude <lyude@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This enables the LEDs that light up based on DPM states
on some Fiji boards.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=97590Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In some cases, manually insmod/rmmod amdgpu is necessary. When
unloading amdgpu, the KIQ IRQ enable/disable function will case
system hang. The root cause is, in the sequence of function
amdgpu_fini, the sw_fini of IP block AMD_IP_BLOCK_TYPE_GFX will be
invoked earlier than that of AMD_IP_BLOCK_TYPE_IH. So continue to use
the variable freed by AMD_IP_BLOCK_TYPE_GFX will cause system hang.
Signed-off-by: NTrigger Huang <trigger.huang@amd.com>
Reviewed-by: Xiangliang Yu < Xiangliang.Yu@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: agd: bump version
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>