- 16 3月, 2017 10 次提交
-
-
由 Mika Kuoppala 提交于
Plan is to make generic residency calculation utility function for usage outside of sysfs. As a first step move residency calculation into intel_pm.c Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Chris Wilson 提交于
lockdep doesn't like us taking the mm->mmap_sem inside the get_pages callback for a couple of reasons. The straightforward deadlock: [13755.434059] ============================================= [13755.434061] [ INFO: possible recursive locking detected ] [13755.434064] 4.11.0-rc1-CI-CI_DRM_297+ #1 Tainted: G U [13755.434066] --------------------------------------------- [13755.434068] gem_userptr_bli/8398 is trying to acquire lock: [13755.434070] (&mm->mmap_sem){++++++}, at: [<ffffffffa00c988a>] i915_gem_userptr_get_pages+0x5a/0x2e0 [i915] [13755.434096] but task is already holding lock: [13755.434098] (&mm->mmap_sem){++++++}, at: [<ffffffff8104d485>] __do_page_fault+0x105/0x560 [13755.434105] other info that might help us debug this: [13755.434108] Possible unsafe locking scenario: [13755.434110] CPU0 [13755.434111] ---- [13755.434112] lock(&mm->mmap_sem); [13755.434115] lock(&mm->mmap_sem); [13755.434117] *** DEADLOCK *** [13755.434121] May be due to missing lock nesting notation [13755.434126] 2 locks held by gem_userptr_bli/8398: [13755.434128] #0: (&mm->mmap_sem){++++++}, at: [<ffffffff8104d485>] __do_page_fault+0x105/0x560 [13755.434135] #1: (&obj->mm.lock){+.+.+.}, at: [<ffffffffa00b887d>] __i915_gem_object_get_pages+0x1d/0x70 [i915] [13755.434156] stack backtrace: [13755.434161] CPU: 3 PID: 8398 Comm: gem_userptr_bli Tainted: G U 4.11.0-rc1-CI-CI_DRM_297+ #1 [13755.434165] Hardware name: GIGABYTE GB-BKi7(H)A-7500/MFLP7AP-00, BIOS F4 02/20/2017 [13755.434169] Call Trace: [13755.434174] dump_stack+0x67/0x92 [13755.434178] __lock_acquire+0x133a/0x1b50 [13755.434182] lock_acquire+0xc9/0x220 [13755.434200] ? i915_gem_userptr_get_pages+0x5a/0x2e0 [i915] [13755.434204] down_read+0x42/0x70 [13755.434221] ? i915_gem_userptr_get_pages+0x5a/0x2e0 [i915] [13755.434238] i915_gem_userptr_get_pages+0x5a/0x2e0 [i915] [13755.434255] ____i915_gem_object_get_pages+0x25/0x60 [i915] [13755.434272] __i915_gem_object_get_pages+0x59/0x70 [i915] [13755.434288] i915_gem_fault+0x397/0x6a0 [i915] [13755.434304] ? i915_gem_fault+0x1a1/0x6a0 [i915] [13755.434308] ? __lock_acquire+0x449/0x1b50 [13755.434311] ? __lock_acquire+0x449/0x1b50 [13755.434315] ? vm_mmap_pgoff+0xa9/0xd0 [13755.434318] __do_fault+0x19/0x70 [13755.434321] __handle_mm_fault+0x863/0xe50 [13755.434325] handle_mm_fault+0x17f/0x370 [13755.434329] ? handle_mm_fault+0x40/0x370 [13755.434332] __do_page_fault+0x279/0x560 [13755.434336] do_page_fault+0xc/0x10 [13755.434339] page_fault+0x22/0x30 [13755.434342] RIP: 0033:0x7f5ab91b5880 [13755.434345] RSP: 002b:00007fff62922218 EFLAGS: 00010216 [13755.434348] RAX: 0000000000b74500 RBX: 00007f5ab7f81000 RCX: 0000000000000000 [13755.434352] RDX: 0000000000100000 RSI: 00007f5ab7f81000 RDI: 00007f5aba61c000 [13755.434355] RBP: 00007f5aba61c000 R08: 0000000000000007 R09: 0000000100000000 [13755.434359] R10: 000000000000037d R11: 00007f5ab91b5840 R12: 0000000000000001 [13755.434362] R13: 0000000000000005 R14: 0000000000000001 R15: 0000000000000000 and cyclic deadlocks: [ 2566.458979] ====================================================== [ 2566.459054] [ INFO: possible circular locking dependency detected ] [ 2566.459127] 4.11.0-rc1+ #26 Not tainted [ 2566.459194] ------------------------------------------------------- [ 2566.459266] gem_streaming_w/759 is trying to acquire lock: [ 2566.459334] (&obj->mm.lock){+.+.+.}, at: [<ffffffffa034bc80>] i915_gem_object_pin_pages+0x0/0xc0 [i915] [ 2566.459605] [ 2566.459605] but task is already holding lock: [ 2566.459699] (&mm->mmap_sem){++++++}, at: [<ffffffff8106fd11>] __do_page_fault+0x121/0x500 [ 2566.459814] [ 2566.459814] which lock already depends on the new lock. [ 2566.459814] [ 2566.459934] [ 2566.459934] the existing dependency chain (in reverse order) is: [ 2566.460030] [ 2566.460030] -> #1 (&mm->mmap_sem){++++++}: [ 2566.460139] lock_acquire+0xfe/0x220 [ 2566.460214] down_read+0x4e/0x90 [ 2566.460444] i915_gem_userptr_get_pages+0x6e/0x340 [i915] [ 2566.460669] ____i915_gem_object_get_pages+0x8b/0xd0 [i915] [ 2566.460900] __i915_gem_object_get_pages+0x6a/0x80 [i915] [ 2566.461132] __i915_vma_do_pin+0x7fa/0x930 [i915] [ 2566.461352] eb_add_vma+0x67b/0x830 [i915] [ 2566.461572] eb_lookup_vmas+0xafe/0x1010 [i915] [ 2566.461792] i915_gem_do_execbuffer+0x715/0x2870 [i915] [ 2566.462012] i915_gem_execbuffer2+0x106/0x2b0 [i915] [ 2566.462152] drm_ioctl+0x36c/0x670 [drm] [ 2566.462236] do_vfs_ioctl+0x12c/0xa60 [ 2566.462317] SyS_ioctl+0x41/0x70 [ 2566.462399] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 2566.462477] [ 2566.462477] -> #0 (&obj->mm.lock){+.+.+.}: [ 2566.462587] __lock_acquire+0x1602/0x1790 [ 2566.462661] lock_acquire+0xfe/0x220 [ 2566.462893] i915_gem_object_pin_pages+0x4c/0xc0 [i915] [ 2566.463116] i915_gem_fault+0x2c2/0x8c0 [i915] [ 2566.463197] __do_fault+0x42/0x130 [ 2566.463276] __handle_mm_fault+0x92c/0x1280 [ 2566.463356] handle_mm_fault+0x1e2/0x440 [ 2566.463443] __do_page_fault+0x1c4/0x500 [ 2566.463529] do_page_fault+0xc/0x10 [ 2566.463613] page_fault+0x1f/0x30 [ 2566.463693] [ 2566.463693] other info that might help us debug this: [ 2566.463693] [ 2566.463820] Possible unsafe locking scenario: [ 2566.463820] [ 2566.463918] CPU0 CPU1 [ 2566.463988] ---- ---- [ 2566.464068] lock(&mm->mmap_sem); [ 2566.464143] lock(&obj->mm.lock); [ 2566.464226] lock(&mm->mmap_sem); [ 2566.464304] lock(&obj->mm.lock); [ 2566.464378] [ 2566.464378] *** DEADLOCK *** [ 2566.464378] [ 2566.464504] 1 lock held by gem_streaming_w/759: [ 2566.464576] #0: (&mm->mmap_sem){++++++}, at: [<ffffffff8106fd11>] __do_page_fault+0x121/0x500 [ 2566.464699] [ 2566.464699] stack backtrace: [ 2566.464801] CPU: 0 PID: 759 Comm: gem_streaming_w Not tainted 4.11.0-rc1+ #26 [ 2566.464881] Hardware name: GIGABYTE GB-BXBT-1900/MZBAYAB-00, BIOS F8 03/02/2016 [ 2566.464983] Call Trace: [ 2566.465061] dump_stack+0x68/0x9f [ 2566.465144] print_circular_bug+0x20b/0x260 [ 2566.465234] __lock_acquire+0x1602/0x1790 [ 2566.465323] ? debug_check_no_locks_freed+0x1a0/0x1a0 [ 2566.465564] ? i915_gem_object_wait+0x238/0x650 [i915] [ 2566.465657] ? debug_lockdep_rcu_enabled.part.4+0x1a/0x30 [ 2566.465749] lock_acquire+0xfe/0x220 [ 2566.465985] ? i915_sg_trim+0x1b0/0x1b0 [i915] [ 2566.466223] i915_gem_object_pin_pages+0x4c/0xc0 [i915] [ 2566.466461] ? i915_sg_trim+0x1b0/0x1b0 [i915] [ 2566.466699] i915_gem_fault+0x2c2/0x8c0 [i915] [ 2566.466939] ? i915_gem_pwrite_ioctl+0xce0/0xce0 [i915] [ 2566.467030] ? __lock_acquire+0x642/0x1790 [ 2566.467122] ? __lock_acquire+0x642/0x1790 [ 2566.467209] ? debug_lockdep_rcu_enabled+0x35/0x40 [ 2566.467299] ? get_unmapped_area+0x1b4/0x1d0 [ 2566.467387] __do_fault+0x42/0x130 [ 2566.467474] __handle_mm_fault+0x92c/0x1280 [ 2566.467564] ? __pmd_alloc+0x1e0/0x1e0 [ 2566.467651] ? vm_mmap_pgoff+0x160/0x190 [ 2566.467740] ? handle_mm_fault+0x111/0x440 [ 2566.467827] handle_mm_fault+0x1e2/0x440 [ 2566.467914] ? handle_mm_fault+0x5d/0x440 [ 2566.468002] __do_page_fault+0x1c4/0x500 [ 2566.468090] do_page_fault+0xc/0x10 [ 2566.468180] page_fault+0x1f/0x30 [ 2566.468263] RIP: 0033:0x557895ced32a [ 2566.468337] RSP: 002b:00007fffd6dd8a10 EFLAGS: 00010202 [ 2566.468419] RAX: 00007f659a4db000 RBX: 0000000000000003 RCX: 00007f659ad032da [ 2566.468501] RDX: 0000000000000000 RSI: 0000000000100000 RDI: 0000000000000000 [ 2566.468586] RBP: 0000000000000007 R08: 0000000000000003 R09: 0000000100000000 [ 2566.468667] R10: 0000000000000001 R11: 0000000000000246 R12: 0000557895ceda60 [ 2566.468749] R13: 0000000000000001 R14: 00007fffd6dd8ac0 R15: 00007f659a4db000 By checking the status of the gup worker (serialized by the obj->mm.lock) we can determine whether it is still active, has failed or has succeeded. If the worker is still active (or failed), we know that it cannot be bound and so we can skip taking struct_mutex (risking potential recursion). As we check the worker status, we mark it to discard any partial results, forcing us to restart on the next get_pages. Reported-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Fixes: 1c8782dd ("drm/i915/userptr: Disallow wrapping GTT into a userptr") Testcase: igt/gem_userptr_blits/map-fixed-invalidate-gup Testcase: igt/gem_userptr_blits/dmabuf-sync Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170315140150.19432-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
-
由 Michal Wajdeczko 提交于
After negative guc fw selection we could leave guc submission flag still turned on. Reorder some checks to cover this case. While here, fix info message and return early if there is no Guc. Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> [tursulin: fixup bad alignment] Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170315133741.150420-1-michal.wajdeczko@intel.com
-
由 Arkadiusz Hiler 提交于
This field is used to determine which kind of firmware the struct describes (GuC/HuC) - the name does not reflect. The enum used here have "type" in the name, so let's go with that. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170315133415.15343-1-arkadiusz.hiler@intel.com
-
由 Chris Wilson 提交于
Tvrtko spotted a stale reference to b->lock (now b->rb_lock) so review the comments and try to improve them in passing. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170315222259.1469-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
-
由 Chris Wilson 提交于
Check that request has not been signaled before acquiring a reference to the request for signaling later in the interrupt handler. The loading of the cacheline (for request->fence.flags) should be "free" when followed by the locked increment of the request->fence.refcount (which then sets the cacheline to exclusive mode), i.e. the cost of test_bit prior to an atomic_inc should be negligible. This should benefit us when we have a pile of bare breadcrumbs (interrupted execbuf) where we may get interrupts faster than we can get rid of the intel_wait, or if the device is too slow to run the bottom-half between interrupts. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-5-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
We need to ensure that we always serialize updates to the bottom-half using the breadcrumbs.irq_lock so that we don't race with a concurrent interrupt handler. This is most important just prior to leaving the waiter (when the intel_wait will be overwritten), so make sure we are not the current bottom-half when skipping the irq locks. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-4-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Before walking the rbtree of waiters (marking them as complete and waking them), decouple the interrupt handler. This prevents a race between the missed waiter waking up and removing its intel_wait (which skips checking the lock) and the interrupt handler dereferencing the intel_wait. (Though we do not expect to encounter waiters during idle!) Fixes: e1c0c91b ("drm/i915: Wake up all waiters before idling") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-3-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
When adding a new request to the breadcrumb rbtree, we mark all those requests inside the rbtree that are already completed as complete. This wakes those waiters up and allows them to skip the spinlock before returning to userspace. If one of those is the current bottom-half and allocated its intel_wait on the stack, it may then overwrite the b->irq_wait upon exiting i915_wait_request() just as the interrupt handler dereferences it. Fixes: 56299fb7 ("drm/i915: Signal first fence from irq handler if complete") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-2-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Since commit 9b6586ae ("drm/i915: Keep a global seqno per-engine") converted intel_breadcrumbs_busy() to reporting a single boolean, we need only compute a boolean internally (and not needlessly compute the flag). Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-1-chris@chris-wilson.co.uk
-
- 15 3月, 2017 12 次提交
-
-
由 Chris Wilson 提交于
We take the runtime pm wakelock during i915_handle_error() to ensure that all paths that reach the error handler keep the device awake during the hw reads. However, we need to extend that from the reset handler to include the earlier capture routines. Reported-by: NAntonio Argenziano <antonio.argenziano@intel.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170314171840.25706-1-chris@chris-wilson.co.ukReviewed-by: NMichel Thierry <michel.thierry@intel.com>
-
由 Michal Wajdeczko 提交于
Manual pointer manipulation is error prone. Let compiler calculate right offsets for us in case we need to change ads layout. v2: don't call it object (Chris) v3: restyle offset assignments (Chris) v4: stylistic reductions Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170314133309.126432-1-michal.wajdeczko@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Arkadiusz Hiler 提交于
`guc_firmware_path` and `huc_firmware_path` module parameters are added. Using the parameter disables version checks and loads desired firmware instead of the default one. v2: make params unsafe && notice about disabled fw check (J. Lahtinen) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Arkadiusz Hiler 提交于
intel_{h,g}uc_init_fw selects correct firmware and then triggers it's preparation (fetch + initial parsing). This change separates out select steps, so those can be called by the sanitize_options(). Then, during the init_fw(), we prepare the firmware if the firmware was selected. Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Arkadiusz Hiler 提交于
Currently fw->path values can represent one of three possible states: 1) NULL - device without the uC 2) '\0' - device with the uC but have no firmware 3) else - device with the uC and we have firmware Second case is used only to WARN at a later stage. We can WARN right away and merge cases 1 and 2. Code can be even further simplified and common (HuC/GuC logic) happening right before the fetch can be offloaded to the common function. v2: fewer temporary variables, more straightforward flow (M. Wajdeczko) v3: DRM_ERROR instead of WARN (M. Wajdeczko) v4: coding standard (J. Lahtinen) v5: non-trivial rebase v6: remove path check, we are checking fetch status (M. Wajdeczko) Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Arkadiusz Hiler 提交于
Current version of intel_guc_init_hw() does a lot: - cares about submission - loads huc - implement WA This change offloads some of the logic to intel_uc_init_hw(), which now cares about the above. v2: rename guc_hw_reset and fix typo in define name (M. Wajdeczko) v3: rename once again v4: remove spurious comments and add some style (J. Lahtinen) v5: flow changes, got rid of dead checks (M. Wajdeczko) v6: rebase v7: rebase & onion teardown (J. Lahtinen) Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Arkadiusz Hiler 提交于
Let intel_guc_init_fw() focus on determining and fetching the correct firmware. This patch introduces intel_uc_sanitize_options() that is called from intel_sanitize_options(). Then, if we have GuC, we can call intel_guc_init_fw() conditionally and we do not have to do the internal checks. v2: fix comment, notify when nuking GuC explicitly enabled (M. Wajdeczko) v3: fix comment again, change the nuke message (M. Wajdeczko) v4: update title to reflect new function name + rebase v5: text && remove 2 uneccessary checks (M. Wajdeczko) Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Arkadiusz Hiler 提交于
Instead of calling intel_guc_init() and intel_huc_init() one by one this patch introduces intel_uc_init_fw() function that calls them both. Called functions are renamed accordingly. Trying to have subject_verb_object ordering and more descriptive names, the intel_huc_init() and intel_guc_init() functions are renamed. For guc_init(): * `intel_guc` is the subject, so those functions now take intel_guc structure, instead of the dev_priv * init is the verb * fw is the object which better describes the function's role huc_init() change follows the same reasoning. v2: settle on intel_uc_fetch_fw name (M. Wajdeczko) v3: yet another rename - intel_uc_init_fw (J. Lahtinen) v4: non-trivial rebase Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Arkadiusz Hiler 提交于
The file fits better. Additionally rename it to intel_uc_prepare_fw(), as the function does more than simple fetch. `obj` cleanup in the function is also fixed (i.e. removed). In the fail scenario it was always 'put' but there's no possible flow that initializes the obj properly and then goes to the fail label. v2: remove second declaration, reorder (M. Wajdeczko) v3: non-trivial rebase v4: remove obj cleanup in the fail scenario (C. Wilson) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Arkadiusz Hiler 提交于
GuC historically has two "startup" functions called _init() and _setup() Then HuC came with it's _init() and _load(). This commit renames intel_guc_setup() and intel_huc_load() to *uc_init_hw() as they called from the i915_gem_init_hw(). The aim is to be consistent in that entry points called during particular driver init phases (e.g. init_hw) are all suffixed by that phase. When reading the leaf functions, it should be clear at what stage during the driver load it is called and therefore what operations are legal at that point. Also, since the functions start with intel_guc and intel_huc they take appropiate structure. v2: commit message update (Chris Wilson) v3: change taken parameters to be more "semantic" (M. Wajdeczko) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Arkadiusz Hiler 提交于
Used to obtain "dev_priv" from huc struct pointer. We already have similar thing for guc. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Arkadiusz Hiler 提交于
Externs are implicit and we generally try to avoid them. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
- 14 3月, 2017 12 次提交
-
-
由 Chris Wilson 提交于
The rcu_barrier() takes the cpu_hotplug mutex which itself is not reclaim-safe, and so rcu_barrier() is illegal from inside the shrinker. [ 309.661373] ========================================================= [ 309.661376] [ INFO: possible irq lock inversion dependency detected ] [ 309.661380] 4.11.0-rc1-CI-CI_DRM_2333+ #1 Tainted: G W [ 309.661383] --------------------------------------------------------- [ 309.661386] gem_exec_gttfil/6435 just changed the state of lock: [ 309.661389] (rcu_preempt_state.barrier_mutex){+.+.-.}, at: [<ffffffff81100731>] _rcu_barrier+0x31/0x160 [ 309.661399] but this lock took another, RECLAIM_FS-unsafe lock in the past: [ 309.661402] (cpu_hotplug.lock){+.+.+.} [ 309.661404] and interrupts could create inverse lock ordering between them. [ 309.661410] other info that might help us debug this: [ 309.661414] Possible interrupt unsafe locking scenario: [ 309.661417] CPU0 CPU1 [ 309.661419] ---- ---- [ 309.661421] lock(cpu_hotplug.lock); [ 309.661425] local_irq_disable(); [ 309.661432] lock(rcu_preempt_state.barrier_mutex); [ 309.661441] lock(cpu_hotplug.lock); [ 309.661446] <Interrupt> [ 309.661448] lock(rcu_preempt_state.barrier_mutex); [ 309.661453] *** DEADLOCK *** [ 309.661460] 4 locks held by gem_exec_gttfil/6435: [ 309.661464] #0: (sb_writers#10){.+.+.+}, at: [<ffffffff8120d83d>] vfs_write+0x17d/0x1f0 [ 309.661475] #1: (debugfs_srcu){......}, at: [<ffffffff81320491>] debugfs_use_file_start+0x41/0xa0 [ 309.661486] #2: (&attr->mutex){+.+.+.}, at: [<ffffffff8123a3e7>] simple_attr_write+0x37/0xe0 [ 309.661495] #3: (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0091b4a>] i915_drop_caches_set+0x3a/0x150 [i915] [ 309.661540] the shortest dependencies between 2nd lock and 1st lock: [ 309.661547] -> (cpu_hotplug.lock){+.+.+.} ops: 829 { [ 309.661553] HARDIRQ-ON-W at: [ 309.661560] __lock_acquire+0x5e5/0x1b50 [ 309.661565] lock_acquire+0xc9/0x220 [ 309.661572] __mutex_lock+0x6e/0x990 [ 309.661576] mutex_lock_nested+0x16/0x20 [ 309.661583] get_online_cpus+0x61/0x80 [ 309.661590] kmem_cache_create+0x25/0x1d0 [ 309.661596] debug_objects_mem_init+0x30/0x249 [ 309.661602] start_kernel+0x341/0x3fe [ 309.661607] x86_64_start_reservations+0x2a/0x2c [ 309.661612] x86_64_start_kernel+0x173/0x186 [ 309.661619] verify_cpu+0x0/0xfc [ 309.661622] SOFTIRQ-ON-W at: [ 309.661627] __lock_acquire+0x611/0x1b50 [ 309.661632] lock_acquire+0xc9/0x220 [ 309.661636] __mutex_lock+0x6e/0x990 [ 309.661641] mutex_lock_nested+0x16/0x20 [ 309.661646] get_online_cpus+0x61/0x80 [ 309.661650] kmem_cache_create+0x25/0x1d0 [ 309.661655] debug_objects_mem_init+0x30/0x249 [ 309.661660] start_kernel+0x341/0x3fe [ 309.661664] x86_64_start_reservations+0x2a/0x2c [ 309.661669] x86_64_start_kernel+0x173/0x186 [ 309.661674] verify_cpu+0x0/0xfc [ 309.661677] RECLAIM_FS-ON-W at: [ 309.661682] mark_held_locks+0x6f/0xa0 [ 309.661687] lockdep_trace_alloc+0xb3/0x100 [ 309.661693] kmem_cache_alloc_trace+0x31/0x2e0 [ 309.661699] __smpboot_create_thread.part.1+0x27/0xe0 [ 309.661704] smpboot_create_threads+0x61/0x90 [ 309.661709] cpuhp_invoke_callback+0x9c/0x8a0 [ 309.661713] cpuhp_up_callbacks+0x31/0xb0 [ 309.661718] _cpu_up+0x7a/0xc0 [ 309.661723] do_cpu_up+0x5f/0x80 [ 309.661727] cpu_up+0xe/0x10 [ 309.661734] smp_init+0x71/0xb3 [ 309.661738] kernel_init_freeable+0x94/0x19e [ 309.661743] kernel_init+0x9/0xf0 [ 309.661748] ret_from_fork+0x2e/0x40 [ 309.661752] INITIAL USE at: [ 309.661757] __lock_acquire+0x234/0x1b50 [ 309.661761] lock_acquire+0xc9/0x220 [ 309.661766] __mutex_lock+0x6e/0x990 [ 309.661771] mutex_lock_nested+0x16/0x20 [ 309.661775] get_online_cpus+0x61/0x80 [ 309.661780] __cpuhp_setup_state+0x44/0x170 [ 309.661785] page_alloc_init+0x23/0x3a [ 309.661790] start_kernel+0x124/0x3fe [ 309.661794] x86_64_start_reservations+0x2a/0x2c [ 309.661799] x86_64_start_kernel+0x173/0x186 [ 309.661804] verify_cpu+0x0/0xfc [ 309.661807] } [ 309.661813] ... key at: [<ffffffff81e37690>] cpu_hotplug+0xb0/0x100 [ 309.661817] ... acquired at: [ 309.661821] lock_acquire+0xc9/0x220 [ 309.661825] __mutex_lock+0x6e/0x990 [ 309.661829] mutex_lock_nested+0x16/0x20 [ 309.661833] get_online_cpus+0x61/0x80 [ 309.661837] _rcu_barrier+0x9f/0x160 [ 309.661841] rcu_barrier+0x10/0x20 [ 309.661847] netdev_run_todo+0x5f/0x310 [ 309.661852] rtnl_unlock+0x9/0x10 [ 309.661856] default_device_exit_batch+0x133/0x150 [ 309.661862] ops_exit_list.isra.0+0x4d/0x60 [ 309.661866] cleanup_net+0x1d8/0x2c0 [ 309.661872] process_one_work+0x1f4/0x6d0 [ 309.661876] worker_thread+0x49/0x4a0 [ 309.661881] kthread+0x107/0x140 [ 309.661884] ret_from_fork+0x2e/0x40 [ 309.661890] -> (rcu_preempt_state.barrier_mutex){+.+.-.} ops: 179 { [ 309.661896] HARDIRQ-ON-W at: [ 309.661901] __lock_acquire+0x5e5/0x1b50 [ 309.661905] lock_acquire+0xc9/0x220 [ 309.661910] __mutex_lock+0x6e/0x990 [ 309.661914] mutex_lock_nested+0x16/0x20 [ 309.661919] _rcu_barrier+0x31/0x160 [ 309.661923] rcu_barrier+0x10/0x20 [ 309.661928] netdev_run_todo+0x5f/0x310 [ 309.661932] rtnl_unlock+0x9/0x10 [ 309.661936] default_device_exit_batch+0x133/0x150 [ 309.661941] ops_exit_list.isra.0+0x4d/0x60 [ 309.661946] cleanup_net+0x1d8/0x2c0 [ 309.661951] process_one_work+0x1f4/0x6d0 [ 309.661955] worker_thread+0x49/0x4a0 [ 309.661960] kthread+0x107/0x140 [ 309.661964] ret_from_fork+0x2e/0x40 [ 309.661968] SOFTIRQ-ON-W at: [ 309.661972] __lock_acquire+0x611/0x1b50 [ 309.661977] lock_acquire+0xc9/0x220 [ 309.661981] __mutex_lock+0x6e/0x990 [ 309.661986] mutex_lock_nested+0x16/0x20 [ 309.661990] _rcu_barrier+0x31/0x160 [ 309.661995] rcu_barrier+0x10/0x20 [ 309.661999] netdev_run_todo+0x5f/0x310 [ 309.662003] rtnl_unlock+0x9/0x10 [ 309.662008] default_device_exit_batch+0x133/0x150 [ 309.662013] ops_exit_list.isra.0+0x4d/0x60 [ 309.662017] cleanup_net+0x1d8/0x2c0 [ 309.662022] process_one_work+0x1f4/0x6d0 [ 309.662027] worker_thread+0x49/0x4a0 [ 309.662031] kthread+0x107/0x140 [ 309.662035] ret_from_fork+0x2e/0x40 [ 309.662039] IN-RECLAIM_FS-W at: [ 309.662043] __lock_acquire+0x638/0x1b50 [ 309.662048] lock_acquire+0xc9/0x220 [ 309.662053] __mutex_lock+0x6e/0x990 [ 309.662058] mutex_lock_nested+0x16/0x20 [ 309.662062] _rcu_barrier+0x31/0x160 [ 309.662067] rcu_barrier+0x10/0x20 [ 309.662089] i915_gem_shrink_all+0x33/0x40 [i915] [ 309.662109] i915_drop_caches_set+0x141/0x150 [i915] [ 309.662114] simple_attr_write+0xc7/0xe0 [ 309.662119] full_proxy_write+0x4f/0x70 [ 309.662124] __vfs_write+0x23/0x120 [ 309.662128] vfs_write+0xc6/0x1f0 [ 309.662133] SyS_write+0x44/0xb0 [ 309.662138] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 309.662142] INITIAL USE at: [ 309.662147] __lock_acquire+0x234/0x1b50 [ 309.662151] lock_acquire+0xc9/0x220 [ 309.662156] __mutex_lock+0x6e/0x990 [ 309.662160] mutex_lock_nested+0x16/0x20 [ 309.662165] _rcu_barrier+0x31/0x160 [ 309.662169] rcu_barrier+0x10/0x20 [ 309.662174] netdev_run_todo+0x5f/0x310 [ 309.662178] rtnl_unlock+0x9/0x10 [ 309.662183] default_device_exit_batch+0x133/0x150 [ 309.662188] ops_exit_list.isra.0+0x4d/0x60 [ 309.662192] cleanup_net+0x1d8/0x2c0 [ 309.662197] process_one_work+0x1f4/0x6d0 [ 309.662202] worker_thread+0x49/0x4a0 [ 309.662206] kthread+0x107/0x140 [ 309.662210] ret_from_fork+0x2e/0x40 [ 309.662214] } [ 309.662220] ... key at: [<ffffffff81e4e1c8>] rcu_preempt_state+0x508/0x780 [ 309.662225] ... acquired at: [ 309.662229] check_usage_forwards+0x12b/0x130 [ 309.662233] mark_lock+0x360/0x6f0 [ 309.662237] __lock_acquire+0x638/0x1b50 [ 309.662241] lock_acquire+0xc9/0x220 [ 309.662245] __mutex_lock+0x6e/0x990 [ 309.662249] mutex_lock_nested+0x16/0x20 [ 309.662253] _rcu_barrier+0x31/0x160 [ 309.662257] rcu_barrier+0x10/0x20 [ 309.662279] i915_gem_shrink_all+0x33/0x40 [i915] [ 309.662298] i915_drop_caches_set+0x141/0x150 [i915] [ 309.662303] simple_attr_write+0xc7/0xe0 [ 309.662307] full_proxy_write+0x4f/0x70 [ 309.662311] __vfs_write+0x23/0x120 [ 309.662315] vfs_write+0xc6/0x1f0 [ 309.662319] SyS_write+0x44/0xb0 [ 309.662323] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 309.662329] stack backtrace: [ 309.662335] CPU: 1 PID: 6435 Comm: gem_exec_gttfil Tainted: G W 4.11.0-rc1-CI-CI_DRM_2333+ #1 [ 309.662342] Hardware name: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.13 07/14/2011 [ 309.662348] Call Trace: [ 309.662354] dump_stack+0x67/0x92 [ 309.662359] print_irq_inversion_bug.part.19+0x1a4/0x1b0 [ 309.662365] check_usage_forwards+0x12b/0x130 [ 309.662369] mark_lock+0x360/0x6f0 [ 309.662374] ? print_shortest_lock_dependencies+0x1a0/0x1a0 [ 309.662379] __lock_acquire+0x638/0x1b50 [ 309.662383] ? __mutex_unlock_slowpath+0x3e/0x2e0 [ 309.662388] ? trace_hardirqs_on+0xd/0x10 [ 309.662392] ? _rcu_barrier+0x31/0x160 [ 309.662396] lock_acquire+0xc9/0x220 [ 309.662400] ? _rcu_barrier+0x31/0x160 [ 309.662404] ? _rcu_barrier+0x31/0x160 [ 309.662409] __mutex_lock+0x6e/0x990 [ 309.662412] ? _rcu_barrier+0x31/0x160 [ 309.662416] ? _rcu_barrier+0x31/0x160 [ 309.662421] ? synchronize_rcu_expedited+0x35/0xb0 [ 309.662426] ? _raw_spin_unlock_irqrestore+0x52/0x60 [ 309.662434] mutex_lock_nested+0x16/0x20 [ 309.662438] _rcu_barrier+0x31/0x160 [ 309.662442] rcu_barrier+0x10/0x20 [ 309.662464] i915_gem_shrink_all+0x33/0x40 [i915] [ 309.662484] i915_drop_caches_set+0x141/0x150 [i915] [ 309.662489] simple_attr_write+0xc7/0xe0 [ 309.662494] full_proxy_write+0x4f/0x70 [ 309.662498] __vfs_write+0x23/0x120 [ 309.662503] ? rcu_read_lock_sched_held+0x75/0x80 [ 309.662507] ? rcu_sync_lockdep_assert+0x2a/0x50 [ 309.662512] ? __sb_start_write+0x102/0x210 [ 309.662516] ? vfs_write+0x17d/0x1f0 [ 309.662520] vfs_write+0xc6/0x1f0 [ 309.662524] ? trace_hardirqs_on_caller+0xe7/0x200 [ 309.662529] SyS_write+0x44/0xb0 [ 309.662533] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 309.662537] RIP: 0033:0x7f507eac24a0 [ 309.662541] RSP: 002b:00007fffda8720e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 309.662548] RAX: ffffffffffffffda RBX: ffffffff81482bd3 RCX: 00007f507eac24a0 [ 309.662552] RDX: 0000000000000005 RSI: 00007fffda8720f0 RDI: 0000000000000005 [ 309.662557] RBP: ffffc9000048bf88 R08: 0000000000000000 R09: 000000000000002c [ 309.662561] R10: 0000000000000014 R11: 0000000000000246 R12: 00007fffda872230 [ 309.662566] R13: 00007fffda872228 R14: 0000000000000201 R15: 00007fffda8720f0 [ 309.662572] ? __this_cpu_preempt_check+0x13/0x20 Fixes: 0eafec6d ("drm/i915: Enable lockless lookup of request tracking via RCU") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100192Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> # v4.9+ Link: http://patchwork.freedesktop.org/patch/msgid/20170314115019.18127-1-chris@chris-wilson.co.ukReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
The 33rd entry in the pre-CSC gamma table in Geminilake can represent a value of 1.0 as 17 bits fixed point with one integer bit. However, the table was generated such that the value of 1.0 would be 0.ffff with all the intervals scaled accordingly. For instance, 0.5 mapped to 0.7fff instead of 0.8000. For a reason that is not clear to the author, the rounding seems to be different when a cursor plane is used, leading to some seemingly random failures of the kms_cursor_crc igt tests. The differences weren't perceptible at 8bpc with images captured by a Chamelium device, but did cause CRC mismatches. Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170310101835.29845-1-ander.conselvan.de.oliveira@intel.com
-
由 Daniel Vetter 提交于
There's really not a reason afaics that we can't just clean up everything at the end, in the terminal postclose hook: Since this is closing a file descriptor we know no one else can have a reference or a thread doing something with that drm_file except the close code. Ordering shouldn't matter, as long as we don't kfree before we clean stuff up. In the past this was more relevant when drivers still had to track and clean up pending drm events, but that's all done by the core now. Reviewed-by: NSean Paul <seanpaul@chromium.org> Reviewed-by: NLiviu Dudau <Liviu.Dudau@arm.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-13-daniel.vetter@ffwll.ch
-
由 Ville Syrjälä 提交于
This reverts commit bb10d4ec. Since commit c8ebfad7 ("drm/i915: Ignore OpRegion panel type except on select machines") we ignore the OpRegion panel type except for specific machines (handled via a DMI match), so having SKL explicitly excluded from using the OpRegion panel type is redundant. So let's remove the SKL check. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170308143334.21216-1-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>
-
由 Daniel Vetter 提交于
The trouble we have is that we can't really test all the shrinker recursion stuff exhaustively in BAT because any kind of thrashing stress test just takes too long. But that leaves a really big gap open, since shrinker recursions are one of the most annoying bugs. Now lockdep already has support for checking allocation deadlocks: - Direct reclaim paths are marked up with lockdep_set_current_reclaim_state() and lockdep_clear_current_reclaim_state(). - Any allocation paths are marked with lockdep_trace_alloc(). If we simply mark up our debugfs with the reclaim annotations, any code and locks taken in there will automatically complete the picture with any allocation paths we already have, as long as we have a simple testcase in BAT which throws out a few objects using this interface. Not stress test or thrashing needed at all. v2: Need to EXPORT_SYMBOL_GPL to make it compile as a module. v3: Fixup rebase fail (spotted by Chris). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-kernel@vger.kernel.org Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170312205340.16202-1-daniel.vetter@ffwll.chSigned-off-by: NDaniel Vetter <daniel.vetter@intel.com>
-
由 Jani Nikula 提交于
The main thing are the DDI ports. If there's a VBT that says there are no outputs, we should trust that, and not have semi-random defaults. Unfortunately, the defaults have resulted in some Chromebooks without VBT to rely on this behaviour, so we split out the defaults for the missing VBT case. Reviewed-by: NManasi Navare <manasi.d.navare@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/95c26079ff640d43f53b944f17e9fc356b36daec.1489152288.git.jani.nikula@intel.com
-
由 Ville Syrjälä 提交于
Use I915_{READ,WRITE}_FW() for updating the DSPARB registers on VLV/CHV. This is less expesive as we can grab the uncore.lock across the entire sequence of reads and writes instead of each register access grabbing it. This also allows us to eliminate the dsparb lock entirely as the uncore.lock now effectively protects the contents of the DSPARB registers. v2: Add a note that interrupts are already disabled (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170309154434.29303-6-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
由 Ville Syrjälä 提交于
Optimize the plane register accesses a little bit by grabbing the uncore lock manually across the entire pile of accesses and using I915_READ_FW(). This helps keep the pipe update vblank evade critical section below our 100 usec deadline, particularly with lockdep enabled. And in general we want to keep that critical section as short as possible as it's executed with interrupts disabled. Not all plane updates currently happen from within the vblank evade critical section, so we must use the irqsave/irqrestore variants of the spinlock functions in the plane hooks. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170309154434.29303-5-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
由 Ville Syrjälä 提交于
Pull all the plane register writes closer together to avoid having a lot of unrelated stuff in between them. This will make things more clear once we'll grab the uncore lock around the entire bunch. Also in the future we might even consider moving more of the register value computation out from the plane update hooks. This should make that easier to do. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170309154434.29303-4-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
由 Ville Syrjälä 提交于
Replace __raw_i915_read32() with I915_READ_FW() in the workaround for the SKL+ scanline counter hardware fail. The two are the same thing but everyone else uses I915_READ_FW() so let's follow suit. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170309154434.29303-3-ville.syrjala@linux.intel.comReviewed-by: NMika Kahola <mika.kahola@intel.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
由 Ville Syrjälä 提交于
Optimize the multi-register read in i915_get_vblank_counter() a little bit by grabbing the uncore lock manually and using I915_READ_FW(). Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170309154434.29303-2-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
由 Ville Syrjälä 提交于
Check that the sink really declared 12bpc support before we enable it. This should not actually never happen since it's mandatory for HDMI sinks to support 12bpc if they support any deep color modes. But reality disagrees with the theory and there are actually sinks in the wild that violate the spec. v2: Fix the output_types check Update commit message to state that these things are in fact real Cc: stable@vger.kernel.org Cc: Nicholas Sielicki <nicholas.sielicki@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99250Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170213175818.24958-1-ville.syrjala@linux.intel.comReviewed-by: NShashank Sharma <shashank.sharma@intel.com>
-
- 13 3月, 2017 6 次提交
-
-
由 Chris Wilson 提交于
i915_drpc_info missed covering a few register read with the runtime pm wakelock. Be simple and cover the entire function with a single wakelock so that new additions are not similarly missed in future. WARNING: CPU: 2 PID: 1334 at drivers/gpu/drm/i915/intel_drv.h:1743 gen6_read32+0x192/0x1e0 [i915] RPM wakelock ref not held during HW access Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver netconsole nfsd auth_rpcgss ipmi_watchdog ipmi_poweroff ipmi_devintf ipmi_msghandler overlay btrfs xor raid6_pq dm_mod sg sd_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ata_generic pata_acpi intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_intel kvm_intel snd_hda_codec kvm eeepc_wmi irqbypass snd_hda_core crct10dif_pclmul crc32_pclmul crc32c_intel asus_wmi sparse_keymap ghash_clmulni_intel snd_hwdep i915 rfkill ppdev pcbc aesni_intel ata_piix crypto_simd glue_helper snd_pcm pata_via cryptd pcspkr snd_timer drm_kms_helper syscopyarea snd sysfillrect libata sysimgblt fb_sys_fops soundcore shpchp drm wmi parport_pc parport tpm_infineon video CPU: 2 PID: 1334 Comm: php5 Not tainted 4.10.0-rc8-01615-g1f58c8e7 #1 Hardware name: System manufacturer System Product Name/P8H67-M PRO, BIOS 1002 04/01/2011 Call Trace: dump_stack+0x63/0x8a __warn+0xcb/0xf0 warn_slowpath_fmt+0x4f/0x60 ? seq_vprintf+0x35/0x50 gen6_read32+0x192/0x1e0 [i915] i915_drpc_info+0x55d/0x990 [i915] seq_read+0xf2/0x3b0 full_proxy_read+0x51/0x80 __vfs_read+0x28/0x130 ? security_file_permission+0x9b/0xc0 ? rw_verify_area+0x4e/0xb0 vfs_read+0xa8/0x170 SyS_read+0x46/0xa0 entry_SYSCALL_64_fastpath+0x1a/0xa9 RIP: 0033:0x7fd97bf175a0 RSP: 002b:00007ffdf730db68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 00007fd978028738 RCX: 00007fd97bf175a0 RDX: 0000000000002000 RSI: 00007fd97740e0d8 RDI: 0000000000000005 RBP: 0000000000000001 R08: 0000000000e97840 R09: 00007fd977ef8d58 R10: 0000000000000027 R11: 0000000000000246 R12: 00007fd977ef8d58 R13: 0000000000000000 R14: 0000000000eb4640 R15: 0000000000000000 Reported-by: Nkernel test robot <xiaolong.ye@intel.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170313095617.29010-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
-
由 Chris Wilson 提交于
gen6_sanitize_rps_pm_mask() is small enough that inlining it shrinks the object code. v2: Use const markup Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170312135426.2216-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
-
由 Chris Wilson 提交于
The patch 791ff39a: "drm/i915: Live testing for context execution" from Feb 13, 2017, leads to the following static checker warning: drivers/gpu/drm/i915/selftests/i915_gem_context.c:347 igt_ctx_exec() error: 'file' dereferencing possible ERR_PTR() Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Fixes: 791ff39a ("drm/i915: Live testing for context execution") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: <drm-intel-fixes@lists.freedesktop.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170313124724.10614-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
-
由 Chris Wilson 提交于
The patch 6e32ab3d: "drm/i915: Fill different pages of the GTT" from Feb 13, 2017, leads to the following static checker warning: drivers/gpu/drm/i915/selftests/i915_gem_gtt.c:583 walk_hole() error: 'vma' dereferencing possible ERR_PTR() Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Fixes: 6e32ab3d ("drm/i915: Fill different pages of the GTT" Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: <drm-intel-fixes@lists.freedesktop.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170313100750.2685-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>
-
由 Chris Wilson 提交于
If the object is coherent, we can simply update the cache domain on the whole object rather than calculate the before/after clflushes. The advantage is that we then get correct tracking of ellided flushes when changing coherency later. Testcase: igt/gem_pwrite_snooped Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170310000942.11661-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
由 Chris Wilson 提交于
The REDIRECT_TO_GUC bit is a strange beast as it is a disable bit - setting the bit in the pm interrupt generation stops the interrupt going to the guc (not sending it to the guc as the name implies). To help the reader rename it to DISABLE_REDIRECT_TO_GUC so that we keep the bspec greppable name without it being as confusing! Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170312132745.9618-1-chris@chris-wilson.co.ukReviewed-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
-