Fixes:

drivers/gpu/drm/i915/i915_dma.c: In function ‘i915_setup_compression’:
drivers/gpu/drm/i915/i915_dma.c:1311: error: ‘compressed_llb’ may be used uninitialized in this function
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

intel_cleanup_ring_buffer() calls drm_gem_object_unreference() (as
opposed to drm_gem_object_unreference_unlocked()) so it needs to be
called with "struct_mutex" held.  If we don't hold the lock, it triggers
a BUG_ON(!mutex_is_locked(&dev->struct_mutex));

I also audited the other places that call intel_cleanup_ring_buffer()
and they all hold the lock so they're OK.

This was introduced in: 8187a2b7 "drm/i915: introduce
intel_ring_buffer structure (V2)" and it's a regression from v2.6.34.

Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=16247Signed-off-by: NDan Carpenter <error27@gmail.com>
Reported-by: NBenny Halevy <bhalevy@panasas.com>
Tested-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Commit 7a772c49 has two bugs which
made the hotplug problems on my laptop worse instead of better.

First, it did not, in fact, disable the CRT plug interrupt -- it
disabled all the other hotplug interrupts.  It seems rather doubtful
that that bit of the patch fixed anything, so let's just remove it.
(If you want to add it back, you probably meant ~CRT_HOTPLUG_INT_EN.)

Second, on at least my GM45, setting CRT_HOTPLUG_ACTIVATION_PERIOD_64
and CRT_HOTPLUG_VOLTAGE_COMPARE_50 (when they were previously unset)
causes a hotplug interrupt about three seconds later.  The old code
never restored PORT_HOTPLUG_EN so this could only happen once, but
they new code restores those registers.  So just set those bits when
we set up the interrupt in the first place.
Signed-off-by: NAndy Lutomirski <luto@mit.edu>
Signed-off-by: NEric Anholt <eric@anholt.net>

The eDP spec claims a 20% overhead for the 8:10 encoding scheme used
on the wire. Take this into account when picking the lane/clock speed
for the panel.

v3: some panels are out of spec, try our best to deal with them, don't
refuse modes on eDP panels, and try the largest allowed settings if
all else fails on eDP.
v4: fix stupid typo, forgot to git add before amending.

Fixes several reports in bugzilla:

      https://bugs.freedesktop.org/show_bug.cgi?id=28070Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

The register offset for FW_BLC_SELF is a totally different set of bits
on Broadwater (it's actually MI_RDRET_STATE), so don't treat it like
FW_BLC_SELF on 965G chips.

Fixes bug https://bugs.freedesktop.org/show_bug.cgi?id=26874.

Cc: stable@kernel.org
Tested-by: NNorman Yarvin <yarvin@yarchive.net>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

If we fill the tail of the physical ring buffer with NOOP when wrapping,
we need to account for the reduction in available space.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

Gen3 chips have slightly different flip commands, and also contain a bit
that indicates whether a "flip pending" interrupt means the flip has
been queued or has been completed.

So implement support for the gen3 flip command, and make sure we use the
flip pending interrupt correctly depending on the value of ECOSKPD bit
0.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

Hardware will set the flip pending ISR bit as soon as it receives the
flip instruction, and (supposedly) clear it once the flip completes
(e.g. at the next vblank).  If we try to send down a flip instruction
while the ISR bit is set, the hardware can become very confused, and we
may never receive the corresponding flip pending interrupt, effectively
hanging the chip.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

The ring_begin API was taking a number of bytes, while all of our
other begin/end macros take number of dwords.  Change the API over to
dwords to prevent future bugs.
Signed-off-by: NZou Nan hai <nanhai.zou@intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Enable self-refresh on 945 when just one CRTC is activated.
Otherwise user would get display flicker with dual display.

This fixes https://bugs.freedesktop.org/show_bug.cgi?id=27667Signed-off-by: NLi Peng <peng.li@intel.com>
Reviewed-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Unmask, then enable interrupts, then enable interrupt sources; matches
PCH ordering.  The old way (sources, enable, unmask) gives a window
during which interrupt conditions would appear in ISR but would never
reach IIR and thus never raise an IRQ.  Since interrupts only trigger
on rising edges in ISR, this would lead to conditions where (for
example) output hotplugging would never fire an interrupt because it
was already stuck on in ISR.

Also, since we know IIR and PIPExSTAT have been cleared during
irq_preinstall, don't clear them again during irq_postinstall, nothing
good can come of that.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Presence detection of a digital monitor seems not to be reliable using
the HTPLG bit.

Dave Müller <dave.mueller@gmx.ch>

Cursors need to be in the GTT domain when being accessed by the GPU.
Previously this was a fortuitous byproduct of userspace using pwrite()
to upload the image data into the cursor. The redundant clflush was
removed in commit 9b8c4a and so the image was no longer being flushed
out of the caches into main memory. One could also devise a scenario
where the cursor was rendered by the GPU, prior to being attached as the
cursor, resulting in similar corruption due to the missing MI_FLUSH.

Fixes:

  Bug 28335 - Cursor corruption caused by commit 9b8c4a0b
  https://bugs.freedesktop.org/show_bug.cgi?id=28335Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NArkadiusz Miśkiewicz <arekm@maven.pl>
Signed-off-by: NEric Anholt <eric@anholt.net>

This reverts commit cfecde43.

The commit was first created as an attempt to fix LVDS initialiazation
on Ironlake. Testing revealed that it didn't fix that, but it was
assumed to still be correct anyway.

Subsequent testing has revealed that this commit has caused other
regressions:

  * Change in VBlank interrupt frequency causing 60% 3D performance regression
    http://bugs.freedesktop.org/show_bug.cgi?id=27698

  * Black screen on G45
    http://bugs.freedesktop.org/show_bug.cgi?id=27733

So revert this buggy code for now to revisit later when we can fix
actual bugs without causing these regressions.
Signed-off-by: NCarl Worth <cworth@cworth.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Don't export cvt_fd & _df when CONFIG_PPC_FPU is not set
  powerpc/44x: icon: select SM502 and frame buffer console support
  powerpc/85xx: Add P1021MDS board support
  powerpc/85xx: Change MPC8572DS camp dtses for MSI sharing
  powerpc/fsl_msi: add removal path and probe failing path
  powerpc/fsl_msi: enable msi sharing through AMP OSes
  powerpc/fsl_msi: enable msi allocation in all banks
  powerpc/fsl_msi: fix the conflict of virt_msir's chip_data
  powerpc/fsl_msi: Add multiple MSI bank support
  powerpc/kexec: Add support for FSL-BookE
  powerpc/fsl-booke: Move the entry setup code into a seperate file
  powerpc/fsl-booke: fix the case where we are not in the first page
  powerpc/85xx: Enable support for ports 3 and 4 on 8548 CDS
  powerpc/fsl-booke: Add hibernation support for FSL BookE processors
  powerpc/e500mc: Implement machine check handler.
  powerpc/44x: Add basic ICON PPC440SPe board support
  powerpc/44x: Fix UART clocks on 440SPe
  powerpc/44x: Add reset-type to katmai.dts
  powerpc/44x: Adding PCI-E support for PowerPC 460SX based SOC.

* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (41 commits)
  drm/i915: add HAS_BSD check to i915_getparam
  drm/i915: Honor sync polarity from VBT panel timing descriptors
  drm/i915: Unmask interrupt for render engine on Sandybridge
  drm/i915: Fix PIPE_CONTROL command on Sandybridge
  drm/i915: Fix up address spaces in slow_kernel_write()
  drm/i915: Use non-atomic kmap for slow copy paths
  drm/i915: Avoid moving from CPU domain during pwrite
  drm/i915: Cleanup after failed initialization of ringbuffers
  drm/i915: Reject bind_to_gtt() early if object > aperture
  drm/i915: Check error code whilst moving buffer to GTT domain.
  drm/i915: Remove spurious warning "Failure to install fence"
  drm/i915: Rebind bo if currently bound with incorrect alignment.
  drm/i915: Include pitch in set_base debug statement.
  drm/i915: Only print "nothing to do" debug message as required.
  drm/i915: Propagate error from unbinding an unfenceable object.
  drm/i915: Avoid nesting of domain changes when setting display plane
  drm/i915: Hold the spinlock whilst resetting unpin_work along error path
  drm/i915: Only print an message if there was an error
  drm/i915: Clean up leftover bits from hws move to ring structure.
  drm/i915: Add CxSR support on Pineview DDR3
  ...

fscache_write_op() makes unnecessary checks of the page variable to see if it
is NULL.  It can't be NULL at those points as the kernel would already have
crashed a little higher up where we examined page->index.

Furthermore, unless radix_tree_gang_lookup_tag() can return 1 but no page, a
NULL pointer crash should not be encountered there as we can only get there if
r_t_g_l_t() returned 1.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This will let userland only try to use the new media decode
functionality when the appropriate kernel is present.
Signed-off-by: NZou Nan hai <nanhai.zou@intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

I'm actually kind of shocked that it works at all otherwise.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

We should only build hpet_example on x86[-64], where it is implemented.
It can cause build errors on other architectures.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix a possible null pointer dereference in afs_alloc_server(): the server
pointer is NULL if there was an allocation failure, and under such a
condition, we can't dereference it in the _leave() statement.
Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In commit e9fb7631 ("cpu-hotplug: introduce cpu_notify(),
__cpu_notify(), cpu_notify_nofail()") the new helper functions access
cpu_chain.  As a result, it shouldn't be marked __cpuinitdata (via
section mismatch warning).

Alternatively, the helper functions should be forced inline, or marked
__ref or __cpuinit.  In the meantime, this patch silences the warning
the trivial way.
Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits)
  kbuild: Revert part of e8d400a9 to resolve a conflict
  kbuild: Fix checking of scm-identifier variable
  gconfig: add support to show hidden options that have prompts
  menuconfig: add support to show hidden options which have prompts
  gconfig: remove show_debug option
  gconfig: remove dbg_print_ptype() and dbg_print_stype()
  kconfig: fix zconfdump()
  kconfig: some small fixes
  add random binaries to .gitignore
  kbuild: Include gen_initramfs_list.sh and the file list in the .d file
  kconfig: recalc symbol value before showing search results
  .gitignore: ignore *.lzo files
  headerdep: perlcritic warning
  scripts/Makefile.lib: Align the output of LZO
  kbuild: Generate modules.builtin in make modules_install
  Revert "kbuild: specify absolute paths for cscope"
  kbuild: Do not unnecessarily regenerate modules.builtin
  headers_install: use local file handles
  headers_check: fix perl warnings
  export_report: fix perl warnings
  ...

* 'for-linus' of git://www.jni.nu/cris:
  CRIS: Don't use mask_irq as symbol name
  CRIS: Simplify param.h by simply including <asm-generic/param.h>
  CRISv10: Whitespace fixes for hw_settings.S
  CRISv10: Trivial fixes.
  CRISv32: Fix RS485 port 4 CD Kconfig item.
  CRISv32: Remove duplicated Kconfig items.
  cris: push down BKL into some device drivers

Commands with data must set the length in the message.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (28 commits)
  drivers/isdn/hardware/mISDN: Use GFP_ATOMIC when a lock is held
  ksz884x: Add missing validate_addr hook
  ksz884x: convert to netdev_tx_t
  virtio-net: pass gfp to add_buf
  be2net: convert hdr.timeout in be_cmd_loopback_test() to le32
  can: mpc5xxx_can.c: Fix build failure
  net/ipv4/tcp_input.c: fix compilation breakage when FASTRETRANS_DEBUG > 1
  net: sock_queue_err_skb() dont mess with sk_forward_alloc
  netfilter: xtables: stackptr should be percpu
  netfilter: don't xt_jumpstack_alloc twice in xt_register_table
  greth: Fix build after OF device conversions.
  net: fix sk_forward_alloc corruptions
  Phonet: listening socket lock protects the connected socket list
  caif: unlock on error path in cfserl_receive()
  be2net: remove superfluous externs
  be2net: add unlock on error path
  net/rds: Add missing mutex_unlock
  drivers/isdn/hardware/mISDN: Add missing spin_unlock
  fs_enet: Adjust BDs after tx error
  skb: make skb_recycle_check() return a bool value
  ...

clear_user() returns the number of bytes that could not be copied rather than
an error code.  So we should return -EFAULT rather than directly returning the
results.

Without this patch, positive values may be returned to elf_fdpic_map_file()
and the following error handlings do not function as expected.

1.
	ret = elf_fdpic_map_file_constdisp_on_uclinux(params, file, mm);
	if (ret < 0)
		return ret;
2.
	ret = elf_fdpic_map_file_by_direct_mmap(params, file, mm);
	if (ret < 0)
		return ret;
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NMike Frysinger <vapier@gentoo.org>
CC: Alexander Viro <viro@zeniv.linux.org.uk>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Daisuke HATAYAMA <d.hatayama@jp.fujitsu.com>
CC: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The function inittiger is only called from nj_init_card, where a lock is held.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@gfp exists@
identifier fn;
position p;
@@

fn(...) {
 ... when != spin_unlock_irqrestore
     when any
 GFP_KERNEL@p
 ... when any
}

@locked@
identifier gfp.fn;
@@

spin_lock_irqsave(...)
...  when != spin_unlock_irqrestore
fn(...)

@depends on locked@
position gfp.p;
@@

- GFP_KERNEL@p
+ GFP_ATOMIC
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add missing validate_addr hook
Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert TX hook to netdev_tx_t type
Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

virtio-net bounces buffer allocations off to
a thread if it can't allocate buffers from the atomic
pool. However, if posting buffers still requires atomic
buffers, this is unlikely to succeed.
Fix by passing in the proper gfp_t parameter.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current code fails on ppc as hdr.timeout is not being converted
to le32.
Signed-off-by: NSathya Perla <sathyap@serverengines.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes build error caused by the OF device_node pointer
being moved into struct device.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit: c720c7e8 missed these.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Correct sk_forward_alloc handling for error_queue would need to use a
backlog of frames that softirq handler could not deliver because socket
is owned by user thread. Or extend backlog processing to be able to
process normal and error packets.

Another possibility is to not use mem charge for error queue, this is
what I implemented in this patch.

Note: this reverts commit 29030374
(net: fix sk_forward_alloc corruptions), since we dont need to lock
socket anymore.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rafael sees a sometimes crash at precpu_modfree from kernel/module.c; it
only occurred with another (since-reverted) patch, but that patch simply
changed timing to uncover this bug, it was otherwise unrelated.

The comment about the mod being freed is self-explanatory, but neither
Tejun nor I read it.  This bug was introduced in 259354de, after it
had previously been fixed in 6e2b7574.  How embarrassing.
Reported-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Embarrassingly-Acked-by: NTejun Heo <tj@kernel.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Tested-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

commit f3c5c1bf (netfilter: xtables: make ip_tables reentrant)
introduced a performance regression, because stackptr array is shared by
all cpus, adding cache line ping pongs. (16 cpus share a 64 bytes cache
line)

Fix this using alloc_percpu()
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Acked-By: NJan Engelhardt <jengelh@medozas.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

In xt_register_table, xt_jumpstack_alloc is called first, later
xt_replace_table is used. But in xt_replace_table, xt_jumpstack_alloc
will be used again. Then the memory allocated by previous xt_jumpstack_alloc
will be leaked. We can simply remove the previous xt_jumpstack_alloc because
there aren't any users of newinfo between xt_jumpstack_alloc and
xt_replace_table.
Signed-off-by: NXiaotian Feng <dfeng@redhat.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jan Engelhardt <jengelh@medozas.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Acked-By: NJan Engelhardt <jengelh@medozas.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>