- 08 7月, 2005 1 次提交
-
-
由 Jeff Dike 提交于
There is absolutely no reason to flush the kernel's VM area during a tlb_flush_mm. This results in a noticable performance increase in the kernel build benchmark. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 6月, 2005 7 次提交
-
-
由 Jeff Dike 提交于
Clean up the hot-unplugging code. There is now an id procedure which is called to figure out what device we're talking to. The error messages from that are now done from mconsole_remove instead of the driver. remove is now called with the device number, after it has been checked, so doesn't need to do sanity checking on it. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
user_time_init_skas and user_time_init_tt were essentially the same. So, this merges them, deleting the mode-specific functions and declarations. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
kmalloc wasn't being disabled during panic. This patch ensures that, no matter how UML is exiting, it is disabled. This matters because part of the cleanup is to remove the umid file, which involves readdir, which calls malloc. This must map to libc malloc, rather than kmalloc or vmalloc. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
In skas mode, the call to uml_idle_timer permanently shut off the virtual timer, resulting in no timer ticks to anything but the idle thread. This is likely the cause of the soft lockups that are seen sporadically in recent UMLs. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
Fix the do_fork calling convention: normal arch pass the regs and the new sp value to do_fork instead of NULL. Currently the arch-independent code ignores these values, while the UML code (actually it's copy_thread) gets the right values by itself. With this patch, things are fixed up. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
Here's a small patch to remove a few unnessesary NULL pointer checks before kfree() in arch/um/drivers/daemon_user.c Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk> Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Size of pointer doesn't seem right, but maybe my solution isn't either (sig_size maybe?). Signed-off-by: NDomen Puncer <domen@coderock.org> Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 6月, 2005 2 次提交
-
-
由 Robert Love 提交于
Convert a bunch of strdup() implementations and their callers to the new kstrdup(). A few remain, for example see sound/core, and there are tons of open coded strdup()'s around. Sigh. But this is a start. Signed-off-by: NRobert Love <rml@novell.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Hansen 提交于
For all architectures, this just means that you'll see a "Memory Model" choice in your architecture menu. For those that implement DISCONTIGMEM, you may eventually want to make your ARCH_DISCONTIGMEM_ENABLE a "def_bool y" and make your users select DISCONTIGMEM right out of the new choice menu. The only disadvantage might be if you have some specific things that you need in your help option to explain something about DISCONTIGMEM. Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 6月, 2005 5 次提交
-
-
With Al Viro <viro@parcelfarce.linux.theplanet.co.uk> To make sure switcheroo() can execute when we remap all the executable image, we used a trick to make it use a local copy of errno... this trick does not work with NPTL glibc, only with LinuxThreads, so use another (simpler) one to make it work anyway. Hopefully, a lot improved thanks to merging with the version of Al Viro (which had his part of problems, though, i.e. removing a fix to another bug and not fixing the problem on i386). Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
With Chris Wedgwood <cw@f00f.org> As suggested by Chris, we can make the "just added" method ->release conditional to UML only (better: to archs requesting it, i.e. only UML currently), so that other archs don't get this unneeded crud, and if UML won't need it any more we can kill this. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> CC: Ingo Molnar <mingo@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
This occurrence of free_irq_by_irq_and_dev() was missed when converting UML to the use of hw_controller_type->release. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
With Chris Wedgwood <cw@f00f.org> Currently UML must explicitly call the UML-specific free_irq_by_irq_and_dev() for each free_irq call it's done. This is needed because ->shutdown and/or ->disable are only called when the last "action" for that irq is removed. Instead, for UML shared IRQs (UML IRQs are very often, if not always, shared), for each dev_id some setup is done, which must be cleared on the release of that fd. For instance, for each open console a new instance (i.e. new dev_id) of the same IRQ is requested(). Exactly, a fd is stored in an array (pollfds), which is after read by a host thread and passed to poll(). Each event registered by poll() triggers an interrupt. So, for each free_irq() we must remove the corresponding host fd from the table, which we do via this -release() method. In this patch we add an appropriate hook for this, and remove all uses of it by pointing the hook to the said procedure; this is safe to do since the said procedure. Also some cosmetic improvements are included. This is heavily based on some work by Chris Wedgwood, which however didn't get the patch merged for something I'd call a "misunderstanding" (the need for this patch wasn't cleanly explained, thus adding the generic hook was felt as undesirable). Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> CC: Ingo Molnar <mingo@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Badari Pulavarty 提交于
Remove PG_highmem, to save a page flag. Use is_highmem() instead. It'll generate a little more code, but we don't use PageHigheMem() in many places. Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 14 6月, 2005 4 次提交
-
-
由 Jeff Dike 提交于
This patch merges a lot of duplicated code in the slip and slirp drivers, abstracts out the slip protocol, and makes the slip driver work in 2.6. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
Convert the boot-time host ptrace testing from clone to fork. They were essentially doing fork anyway. This cleans up the code a bit, and makes valgrind a bit happier about grinding it. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
Fix a build failure when CONFIG_MODE_SKAS is disabled and make a Makefile comment fit in 80 columns. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
A few files include the same header twice. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 6月, 2005 4 次提交
-
-
由 Jeff Dike 提交于
This cleans an error path which used to leak file descriptors by returning without trying to tidy up. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
It turns out that we need to check for pending signals when a newly forked process is run for the first time. With strace -f, strace needs to know about the forked process before it gets going. If it doesn't, then it ptraces some bogus values into its registers, and the process segfaults. So, I added calls to interrupt_end, which does that, plus checks for reschedules. There shouldn't be any of those, but x86 does the same thing, so I'm copying that behavior to be safe. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
This is a bunch of compile fixes provoked by building UML with gcc 4. There are a bunch of signedness mismatches, a couple of uninitialized references, and a botched C99 structure initialization which had somehow gone unnoticed. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
This makes the minimal fixes needed to make the UML iomem driver work in 2.6. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 5月, 2005 11 次提交
-
-
This var is currently useless, as it's apparent from reading the code. Until 2.6.11 it was used in some code related to jail mode, in the same proc.: if(jail){ while(!reading) sched_yield(); } jail mode has been dropped, together with that use, so let's finish dropping this. Also, remove some other useless definitions I met. Acked-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
Fix it a bit (after some cross checking with "man arch_prctl"). There were: *) typos FS/GS and back *) FS in place of FS_BASE (and the same for GS) *) the procedure used put_user on &addr, where addr was the parameter (i.e. changed its param with put_user, completely useless) rather than interpreting addr as a pointer, as requested in this case (see the man page). Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
Copy (and adapt) to UML the stack code dumper used in i386 when CONFIG_FRAME_POINTER is enabled. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
Until now, FRAME_POINTER was set = DEBUG_INFO for UML. Change it to be the default way, so that it can be enabled alone (for instance to get better backtraces on crashes). The call-trace dumper which uses the frame pointer is not yet in, I'm going to introduce it in a separate patch. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
Add a MODULE_LICENSE("GPL") to the driver, remove some unused macros and add the GPL license (it's GPL-licensed anyway since it's a GPL-derivative, apart that Jeff Dike releases GPL software, in case anybody is wondering). Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
This removes two now unused files and a couple of unused functions. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
We need to disable signals on exit in all cases, not just when rebooting. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
One of the ubd driver help strings was bust. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
Remove old useless header that was used in Ye Olde Times during 2.4->2.5 porting to abstract differences. It's definitions are no more used anyway, so let's finally kill it. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
We should turn off kmalloc when getting a fatal signal regardless of the mode we're in. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
Eliminate an unused variable warning in ptrace.c and a size mismatch warning by adding a cast to __pa. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 5月, 2005 6 次提交
-
-
由 Jeff Dike 提交于
From: Al Viro - we have error messages with KERN_ERR in them, so they should be printk-ed rather than printf-ed. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
From: Al Viro - add three-level page table support to fixrange_init. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
Finally rip out the ubd-mmap code, which turned out to be broken by design. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
The serial UML OS-abstraction layer patch (um/kernel dir). This moves all systemcalls from initrd_user.c file under os-Linux dir and join initrd_user.c and initrd_kern.c files in new file initrd.c Signed-off-by: NGennady Sharapov <Gennady.V.Sharapov@intel.com> Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
From: Oleg Drokin: This patch is needed to support kernel modules that want to use clear_user() (that is exported symbol on all other architectures). Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
Byte-swapping of the port and IP address passed in to the multicast driver by the user used to happen in different places, which was a bug in itself. The port also was swapped before being printk-ed, which led to a misleading message. This patch moves the port swapping to the same place as the IP address swapping. It also cleans up the error paths of mcast_open. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-