Add the includes that are currently missing in nvec.h
and nvec.c and reorder them alphabetically.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I intent to support this code, especially the parts
I wrote; and will thus enter as co-maintainer.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The nvec_power system polls nvec for battery information. In some
cases, that part seems to be overloaded and unable to respond
fast in which case it sends an incomplete response. We need to
mark the transfer as completed, though, in order to prevent
endless retries which can kill nvec.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Get 4 bytes of data from nvec at once instead of just a single
byte. This makes the driver more similar to nvidias and might
improve reliability.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Return the return value of nvec_write_async() in the methods
returning an int.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Reject incomplete messages, causing the request to be
transmitted again. This should fix various problems
out there.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If no RX buffer is available in state 1, jump to state
0 again. This will produce an incredible amount of
warnings, but it is not supposed to happen anyway.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Allow TX buffers to be allocated only in the upper 75% of the pool
to avoid a completely filled buffer preventing the driver from
processing responses. This also improves performance, as RX
allocations do not require checking buffers allocated for TX
unless there are more than 16 incoming messages -- which is
highly unlikely.

An earlier version used the lower 75% for TX messages, but
that was considered to be not that effective due to the
overlaps of RX and TX buffers mentioned above.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Client code wishing to make use of nvec_write_sync() must
have a way to free the returned pointer, otherwise we run
out of poool memory fairly soon.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Those macros are needed only for implementation purposes and
do not have any use for other code wishing to use nvec.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add kernel-doc comments describing the functions
and structs we currently have.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Change nvec_write_async() to return an integer, 0 by default,
a negative error on failure. Change nvec_write_sync() to
check the return value and abort if it is negative.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When the caps lock key is pressed, toggle the associated
LED. According to Nvidia code, we should send 0x01 where
we sent 0x07, but this does not appear to work correctly
on the AC100.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Forgotten in the last commit(s) which contained the copyrightable
material, so let's add it now. I believe that only my nvec.c
contributions are copyrightable, nvec.h is just interface naming,
so does not deserve that yet.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The scratch area is not part of the pool and thus gets
no allocation message. Printing a free message would
be confusing, and the pointer subtraction would be
undefined behavior.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Rewrite the interrupt handler to use a state machine similar to
that found in the various kernels for the Advent Vega. This also
changes the code to use the new functions introduced in the
previous commits.

This also merges the rewrite sent in August 2011 by Marc
Dietrich, and thus also includes code by him. His original
patch can be found on the mailing list.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add functions nvec_msg_is_event() and nvec_msg_size() which
do just what the say: tell whether the message is an event,
and getting the size of the message.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Introduce nvec_gpio_set_value(), which works like
gpio_set_value(), but also creates a debugging
message, if that's enabled.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Introduce two new functions nvec_msg_alloc() and nvec_msg_free()
that allocate and free message buffers from the internal pool
of messages.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds config dependencies for the NVEC keyboard, mouse,
and power drivers.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds the relevant info to the MAINTAINERS file so people can
find the right person to blame.
Signed-off-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Mostly small stuff only. Hopefully completed during the next
release cycle.
Signed-off-by: NMarc Dietrich <marvin24@gmx.de>
[jak@jak-linux.org: Removed some items no longer valid]
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds support for LEDs connect to a nvec. A single brightness
property is exported to sysfs. LEDs are selected via bitfields in the
brightness value. Also the blinking behavior is selected through this
method. Vendors may use different values for different HW designs.
Signed-off-by: NIlya Petrov <ilya.muromec@gmail.com>
Signed-off-by: NMarc Dietrich <marvin24@gmx.de>
[jak@jak-linux.org: Fixed checkpatch warnings]
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The ec command used was for muting, not unmuting.
Signed-off-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Rework the tegra slave controller init to look more like in
tegra-i2c.c. This makes the nvec init reliable. Also add de-init of
the slave to be used during suspend.
Signed-off-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Split of the previous patch and the next by Marc, as that
patch is not strictly a coding style fix only.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes coding style and adds copyright notices.
Signed-off-by: NMarc Dietrich <marvin24@gmx.de>
[jak@jak-linux.org: Merge later cleanup into that patch]
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Those headers were apparently included by other headers
previously, but are not anymore.
Signed-off-by: NJulian Andres Klode <jak@jak-linux.org>
Acked-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch alters a line of code to make it more readable
and easier to understand. The purpose of the original line
of code was to compute the amount of memory to request from
kmalloc. This mulit-step algorithm was being done in one
line of code, thus making it more difficult to understand.
Therefore, I split this algorithm into three logical steps.
Signed-off-by: NKevin McKinney <klmckinney1@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes two issues within bcm/Bcmchar.c. The
first condition in the or statement checks if variable
IoBuffer.OutputLength, defined from user space, is
greater than the maximum value allowed for an
unsigned short. IoBuffer.OutputLength is then used
in a kmalloc call to return a pointer to memory. If
this size is greater than an unsigned short, it
becomes useless. The second condition in the or statement
checks if the same variable, IoBuffer.OutputLength is
equal to zero before invoking the kmalloc call. In
this case, if a zero size is sent to kmalloc, a valid
pointer to memory is returned instead of the expected NULL.
Signed-off-by: NKevin McKinney <klmckinney1@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Checking carrier status in netvsc_open() is not necessary.
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

param->u.wpa_key.key_len comes from the user.  If it's too large we
would write past the end of the array.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This was originally there to avoid churn during a complex change.
Now everything is stable lets get rid of this as it is missleading
and confusing.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Now that all vmbus audit related comments have been addressed,
update the TODO file to reflect this.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

to declare wireless handlers.
Signed-off-by: NDavid Kilroy <kilroyd@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

WE21 clarified that ESSID should not be NULL terminated.
The existing code didn't NULL terminate, but did play with length
and then reset it again. Just stop it.
Signed-off-by: NDavid Kilroy <kilroyd@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

WEXT changes between versions 15 and 21 have been taken care of,
so update the declared support.
Signed-off-by: NDavid Kilroy <kilroyd@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add recently added events to the capabilities reported in iw_range.
Use capability macros instead of assuming the array offsets.

Explicitly list scan capabilities.
Signed-off-by: NDavid Kilroy <kilroyd@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers: staging: comedi: cb_das16_cs.c
fixed over 80 line issue, and removed a space before tab issue.
Signed-off-by: NChristopher Rice <rice.christopher.a@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Added log subject to printk()s in drivers/staging/comedi/drivers/pcmmio.c.
Signed-off-by: NJohannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>