- 23 6月, 2015 5 次提交
-
-
由 Palik, Imre 提交于
Commit edafc132 ("xen-netback: making the bandwidth limiter runtime settable") introduced the capability to change the bandwidth rate limit at runtime. But it also introduced a possible crashing bug. If netback receives two XenbusStateConnected without getting the hotplug-status watch firing in between, then it will try to register the watches for the rate limiter again. But this triggers a BUG() in the watch registration code. The fix modifies connect() to remove the possibly existing packet-rate watches before trying to install those watches. This behaviour is in line with how connect() deals with the hotplug-status watch. Signed-off-by: NImre Palik <imrep@amazon.de> Cc: Matt Wilson <msw@amazon.com> Acked-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Satish Ashok 提交于
When a port goes through a link down/up the multicast router configuration is not restored. Signed-off-by: NSatish Ashok <sashok@cumulusnetworks.com> Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Fixes: 0909e117 ("bridge: Add multicast_router sysfs entries") Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
A ROSE socket doesn't necessarily always have a neighbour pointer so check if the neighbour pointer is valid before dereferencing it. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Tested-by: NBernard Pidoux <f6bvp@free.fr> Cc: stable@vger.kernel.org #2.6.11+ Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Paasch 提交于
tcp_fastopen_reset_cipher really cannot be called from interrupt context. It allocates the tcp_fastopen_context with GFP_KERNEL and calls crypto_alloc_cipher, which allocates all kind of stuff with GFP_KERNEL. Thus, we might sleep when the key-generation is triggered by an incoming TFO cookie-request which would then happen in interrupt- context, as shown by enabling CONFIG_DEBUG_ATOMIC_SLEEP: [ 36.001813] BUG: sleeping function called from invalid context at mm/slub.c:1266 [ 36.003624] in_atomic(): 1, irqs_disabled(): 0, pid: 1016, name: packetdrill [ 36.004859] CPU: 1 PID: 1016 Comm: packetdrill Not tainted 4.1.0-rc7 #14 [ 36.006085] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 36.008250] 00000000000004f2 ffff88007f8838a8 ffffffff8171d53a ffff880075a084a8 [ 36.009630] ffff880075a08000 ffff88007f8838c8 ffffffff810967d3 ffff88007f883928 [ 36.011076] 0000000000000000 ffff88007f8838f8 ffffffff81096892 ffff88007f89be00 [ 36.012494] Call Trace: [ 36.012953] <IRQ> [<ffffffff8171d53a>] dump_stack+0x4f/0x6d [ 36.014085] [<ffffffff810967d3>] ___might_sleep+0x103/0x170 [ 36.015117] [<ffffffff81096892>] __might_sleep+0x52/0x90 [ 36.016117] [<ffffffff8118e887>] kmem_cache_alloc_trace+0x47/0x190 [ 36.017266] [<ffffffff81680d82>] ? tcp_fastopen_reset_cipher+0x42/0x130 [ 36.018485] [<ffffffff81680d82>] tcp_fastopen_reset_cipher+0x42/0x130 [ 36.019679] [<ffffffff81680f01>] tcp_fastopen_init_key_once+0x61/0x70 [ 36.020884] [<ffffffff81680f2c>] __tcp_fastopen_cookie_gen+0x1c/0x60 [ 36.022058] [<ffffffff816814ff>] tcp_try_fastopen+0x58f/0x730 [ 36.023118] [<ffffffff81671788>] tcp_conn_request+0x3e8/0x7b0 [ 36.024185] [<ffffffff810e3872>] ? __module_text_address+0x12/0x60 [ 36.025327] [<ffffffff8167b2e1>] tcp_v4_conn_request+0x51/0x60 [ 36.026410] [<ffffffff816727e0>] tcp_rcv_state_process+0x190/0xda0 [ 36.027556] [<ffffffff81661f97>] ? __inet_lookup_established+0x47/0x170 [ 36.028784] [<ffffffff8167c2ad>] tcp_v4_do_rcv+0x16d/0x3d0 [ 36.029832] [<ffffffff812e6806>] ? security_sock_rcv_skb+0x16/0x20 [ 36.030936] [<ffffffff8167cc8a>] tcp_v4_rcv+0x77a/0x7b0 [ 36.031875] [<ffffffff816af8c3>] ? iptable_filter_hook+0x33/0x70 [ 36.032953] [<ffffffff81657d22>] ip_local_deliver_finish+0x92/0x1f0 [ 36.034065] [<ffffffff81657f1a>] ip_local_deliver+0x9a/0xb0 [ 36.035069] [<ffffffff81657c90>] ? ip_rcv+0x3d0/0x3d0 [ 36.035963] [<ffffffff81657569>] ip_rcv_finish+0x119/0x330 [ 36.036950] [<ffffffff81657ba7>] ip_rcv+0x2e7/0x3d0 [ 36.037847] [<ffffffff81610652>] __netif_receive_skb_core+0x552/0x930 [ 36.038994] [<ffffffff81610a57>] __netif_receive_skb+0x27/0x70 [ 36.040033] [<ffffffff81610b72>] process_backlog+0xd2/0x1f0 [ 36.041025] [<ffffffff81611482>] net_rx_action+0x122/0x310 [ 36.042007] [<ffffffff81076743>] __do_softirq+0x103/0x2f0 [ 36.042978] [<ffffffff81723e3c>] do_softirq_own_stack+0x1c/0x30 This patch moves the call to tcp_fastopen_init_key_once to the places where a listener socket creates its TFO-state, which always happens in user-context (either from the setsockopt, or implicitly during the listen()-call) Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Fixes: 222e83d2 ("tcp: switch tcp_fastopen key generation to net_get_random_once") Signed-off-by: NChristoph Paasch <cpaasch@apple.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stas Sergeev 提交于
The commit 898b2970 ("mvneta: implement SGMII-based in-band link state signaling") changed mvneta_adjust_link() so that it does not clear the auto-negotiation bits in MVNETA_GMAC_AUTONEG_CONFIG register. This was necessary for auto-negotiation mode to work. Unfortunately I haven't checked if these bits are ever initialized. It appears they are not. This patch adds the missing initialization of the auto-negotiation bits in the MVNETA_GMAC_AUTONEG_CONFIG register. It fixes the following regression: https://www.mail-archive.com/netdev@vger.kernel.org/msg67928.html Since the patch was tested to fix a regression, it should be applied to stable tree. Tested-by: NArnaud Ebalard <arno@natisbad.org> CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> CC: Florian Fainelli <f.fainelli@gmail.com> CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: stable@vger.kernel.org Signed-off-by: NStas Sergeev <stsp@users.sourceforge.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 6月, 2015 5 次提交
-
-
由 Willem de Bruijn 提交于
PACKET_FANOUT_LB computes f->rr_cur such that it is modulo f->num_members. It returns the old value unconditionally, but f->num_members may have changed since the last store. Ensure that the return value is always < num. When modifying the logic, simplify it further by replacing the loop with an unconditional atomic increment. Fixes: dc99f600 ("packet: Add fanout support.") Suggested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NWillem de Bruijn <willemb@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
Unfortunately, Michal's change to fix AP_VLAN crypto tailroom caused a locking issue that was reported by lockdep, but only in a few cases - the issue was a classic ABBA deadlock caused by taking the mtx after the key_mtx, where normally they're taken the other way around. As the key mutex protects the field in question (I'm adding a few annotations to make that clear) only the iteration needs to be protected, but we can also iterate the interface list with just RCU protection while holding the key mutex. Fixes: f9dca80b ("mac80211: fix AP_VLAN crypto tailroom calculation") Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolai Stange 提交于
Fix an allmodconfig compilation failer on microblaze due to big endian architectures being apparently unsupported by the NetJet code: drivers/isdn/hisax/nj_s.c: In function 'setup_netjet_s': drivers/isdn/hisax/nj_s.c:265:2: error: #error "not running on big endian machines now" Modify the relevant Kconfig such that the NetJet code is not built on microblaze anymore. Note that endianess on microblaze is not determined through Kconfig, but by means of a compiler provided CPP macro, namely __MICROBLAZEEL__. However, gcc defaults to big endianess on that platform. Signed-off-by: NNicolai Stange <nicstange@gmail.com> Acked-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
The lockless lookups can return entry that is unlinked. Sometimes they get reference before last neigh_cleanup_and_release, sometimes they do not need reference. Later, any modification attempts may result in the following problems: 1. entry is not destroyed immediately because neigh_update can start the timer for dead entry, eg. on change to NUD_REACHABLE state. As result, entry lives for some time but is invisible and out of control. 2. __neigh_event_send can run in parallel with neigh_destroy while refcnt=0 but if timer is started and expired refcnt can reach 0 for second time leading to second neigh_destroy and possible crash. Thanks to Eric Dumazet and Ying Xue for their work and analyze on the __neigh_event_send change. Fixes: 767e97e1 ("neigh: RCU conversion of struct neighbour") Fixes: a263b309 ("ipv4: Make neigh lookups directly in output packet path.") Fixes: 6fd6ce20 ("ipv6: Do not depend on rt->n in ip6_finish_output2().") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: NJulian Anastasov <ja@ssi.bg> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We need to tell compiler it must not read f->num_members multiple times. Otherwise testing if num is not zero is flaky, and we could attempt an invalid divide by 0 in fanout_demux_cpu() Note bug was present in packet_rcv_fanout_hash() and packet_rcv_fanout_lb() but final 3.1 had a simple location after commit 95ec3eb4 ("packet: Add 'cpu' fanout policy.") Fixes: dc99f600 ("packet: Add fanout support.") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 6月, 2015 1 次提交
-
-
由 Nikolay Aleksandrov 提交于
After the ->set() spinlocks were removed br_stp_set_bridge_priority was left running without any protection when used via sysfs. It can race with port add/del and could result in use-after-free cases and corrupted lists. Tested by running port add/del in a loop with stp enabled while setting priority in a loop, crashes are easily reproducible. The spinlocks around sysfs ->set() were removed in commit: 14f98f25 ("bridge: range check STP parameters") There's also a race condition in the netlink priority support that is fixed by this change, but it was introduced recently and the fixes tag covers it, just in case it's needed the commit is: af615762 ("bridge: add ageing_time, stp_state, priority over netlink") Signed-off-by: NNikolay Aleksandrov <razor@blackwall.org> Fixes: 14f98f25 ("bridge: range check STP parameters") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 6月, 2015 1 次提交
-
-
由 Or Gerlitz 提交于
Due to firmware bug, under VPI configuration when port1 = IB and port2 = Eth, Granular QoS per VF isn't working properly. More over, the whole QP0/QP1 Para-Virtualization in the mlx4 IB driver is broken on that config. Hence, we must disable Granular QoS per VF under that configuration till a fix is introduced. Once that happens, a new device capability will be used to mark the feature support on that specific configuration. Reported-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 6月, 2015 1 次提交
-
-
由 Marcelo Ricardo Leitner 提交于
->auto_asconf_splist is per namespace and mangled by functions like sctp_setsockopt_auto_asconf() which doesn't guarantee any serialization. Also, the call to inet_sk_copy_descendant() was backuping ->auto_asconf_list through the copy but was not honoring ->do_auto_asconf, which could lead to list corruption if it was different between both sockets. This commit thus fixes the list handling by using ->addr_wq_lock spinlock to protect the list. A special handling is done upon socket creation and destruction for that. Error handlig on sctp_init_sock() will never return an error after having initialized asconf, so sctp_destroy_sock() can be called without addrq_wq_lock. The lock now will be take on sctp_close_sock(), before locking the socket, so we don't do it in inverse order compared to sctp_addr_wq_timeout_handler(). Instead of taking the lock on sctp_sock_migrate() for copying and restoring the list values, it's preferred to avoid rewritting it by implementing sctp_copy_descendant(). Issue was found with a test application that kept flipping sysctl default_auto_asconf on and off, but one could trigger it by issuing simultaneous setsockopt() calls on multiple sockets or by creating/destroying sockets fast enough. This is only triggerable locally. Fixes: 9f7d653b ("sctp: Add Auto-ASCONF support (core).") Reported-by: NJi Jianwen <jiji@redhat.com> Suggested-by: NNeil Horman <nhorman@tuxdriver.com> Suggested-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 6月, 2015 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix uninitialized struct station_info in cfg80211_wireless_stats(), from Johannes Berg. 2) Revert commit attempt to fix ipv6 protocol resubmission, it adds regressions. 3) Endless loops can be created in bridge port lists, fix from Nikolay Aleksandrov. 4) Don't WARN_ON() if sk->sk_forward_alloc is non-zero in sk_clear_memalloc, it is a legal situation during swap deactivation. Fix from Mel Gorman. 5) Fix order of disabling interrupts and unlocking NAPI in enic driver to avoid a race. From Govindarajulu Varadarajan. 6) High and low register writes are swapped when programming the start of periodic output in igb driver. From Richard Cochran. 7) Fix device rename handling in mpls stack, from Robert Shearman. 8) Do not trigger compaction synchronously when optimistically trying to allocate an order 3 page in alloc_skb_with_frags() and skb_page_frag_refill(). From Shaohua Li. 9) Authentication with COOKIE_ECHO is not handled properly in SCTP, fix from Marcelo Ricardo Leitner. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: Doc: networking: Fix URL for wiki.wireshark.org in udplite.txt sctp: allow authenticating DATA chunks that are bundled with COOKIE_ECHO net: don't wait for order-3 page allocation mpls: handle device renames for per-device sysctls net: igb: fix the start time for periodic output signals enic: fix memory leak in rq_clean enic: check return value for stat dump enic: unlock napi busy poll before unmasking intr net, swap: Remove a warning and clarify why sk_mem_reclaim is required when deactivating swap bridge: fix multicast router rlist endless loop tipc: disconnect socket directly after probe failure Revert "ipv6: Fix protocol resubmission" cfg80211: wext: clear sinfo struct before calling driver
-
由 Masanari Iida 提交于
This patch fix URL (http to https) for wiki.wireshark.org. Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcelo Ricardo Leitner 提交于
Currently, we can ask to authenticate DATA chunks and we can send DATA chunks on the same packet as COOKIE_ECHO, but if you try to combine both, the DATA chunk will be sent unauthenticated and peer won't accept it, leading to a communication failure. This happens because even though the data was queued after it was requested to authenticate DATA chunks, it was also queued before we could know that remote peer can handle authenticating, so sctp_auth_send_cid() returns false. The fix is whenever we set up an active key, re-check send queue for chunks that now should be authenticated. As a result, such packet will now contain COOKIE_ECHO + AUTH + DATA chunks, in that order. Reported-by: NLiu Wei <weliu@redhat.com> Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block layer fixes from Jens Axboe: "Remember about a week ago when I sent the last pull request for 4.1? Well, I lied. Now, I don't want to shift the blame, but Dan, Ming, and Richard made a liar out of me. Here are three small patches that should go into 4.1. More specifically, this pull request contains: - A Kconfig dependency for the pmem block driver, so it can't be selected if HAS_IOMEM isn't availble. From Richard Weinberger. - A fix for genhd, making the ext_devt_lock softirq safe. This makes lockdep happier, since we also end up grabbing this lock on release off the softirq path. From Dan Williams. - A blk-mq software queue release fix from Ming Lei. Last two are headed to stable, first fixes an issue introduced in this cycle" * 'for-linus' of git://git.kernel.dk/linux-block: block: pmem: Add dependency on HAS_IOMEM block: fix ext_dev_lock lockdep report blk-mq: free hctx->ctxs in queue's release handler
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull three more md fixes from Neil Brown: "Hasn't been a good cycle for md has it :-( The main issue fixed here is a rare race which can result in two reshape threads running at once, which doesn't end well. Also a minor issue with a write to a sysfs file returning the wrong value. Backports to 4.0-stable are indicated" * tag 'md/4.1-rc7-fixes' of git://neil.brown.name/md: md: make sure MD_RECOVERY_DONE is clear before starting recovery/resync md: Close race when setting 'action' to 'idle'. md: don't return 0 from array_state_store
-
git://git.infradead.org/intel-iommu由 Linus Torvalds 提交于
Pull VT-d hardware workarounds from David Woodhouse: "This contains a workaround for hardware issues which I *thought* were never going to be seen on production hardware. I'm glad I checked that before the 4.1 release... Firstly, PASID support is so broken on existing chips that we're just going to declare the old capability bit 28 as 'reserved' and change the VT-d spec to move PASID support to another bit. So any existing hardware doesn't support SVM; it only sets that (now) meaningless bit 28. That patch *wasn't* imperative for 4.1 because we don't have PASID support yet. But *even* the extended context tables are broken — if you just enable the wider tables and use none of the new bits in them, which is precisely what 4.1 does, you find that translations don't work. It's this problem which I thought was caught in time to be fixed before production, but wasn't. To avoid triggering this issue, we now *only* enable the extended context tables on hardware which also advertises "we have PASID support and we actually tested it this time" with the new PASID feature bit. In addition, I've added an 'intel_iommu=ecs_off' command line parameter to allow us to disable it manually if we need to" * git://git.infradead.org/intel-iommu: iommu/vt-d: Only enable extended context tables if PASID is supported iommu/vt-d: Change PASID support to bit 40 of Extended Capability Register
-
- 12 6月, 2015 12 次提交
-
-
由 David Woodhouse 提交于
Although the extended tables are theoretically a completely orthogonal feature to PASID and anything else that *uses* the newly-available bits, some of the early hardware has problems even when all we do is enable them and use only the same bits that were in the old context tables. For now, there's no motivation to support extended tables unless we're going to use PASID support to do SVM. So just don't use them unless PASID support is advertised too. Also add a command-line bailout just in case later chips also have issues. The equivalent problem for PASID support has already been fixed with the upcoming VT-d spec update and commit bd00c606 ("iommu/vt-d: Change PASID support to bit 40 of Extended Capability Register"), because the problematic platforms use the old definition of the PASID-capable bit, which is now marked as reserved and meaningless. So with this change, we'll magically start using ECS again only when we see the new hardware advertising "hey, we have PASID support and we actually tested it this time" on bit 40. The VT-d hardware architect has promised that we are not going to have any reason to support ECS *without* PASID any time soon, and he'll make sure he checks with us before changing that. In the future, if hypothetical new features also use new bits in the context tables and can be seen on implementations *without* PASID support, we might need to add their feature bits to the ecs_enabled() macro. Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 NeilBrown 提交于
MD_RECOVERY_DONE is normally cleared by md_check_recovery after a resync etc finished. However it is possible for raid5_start_reshape to race and start a reshape before MD_RECOVERY_DONE is cleared. This can lean to multiple reshapes running at the same time, which isn't good. To make sure it is cleared before starting a reshape, and also clear it when reaping a thread, just to be safe. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
Checking ->sync_thread without holding the mddev_lock() isn't really safe, even after flushing the workqueue which ensures md_start_sync() has been run. While this code is waiting for the lock, md_check_recovery could reap the thread itself, and then start another thread (e.g. recovery might finish, then reshape starts). When this thread gets the lock md_start_sync() hasn't run so it doesn't get reaped, but MD_RECOVERY_RUNNING gets cleared. This allows two threads to start which leads to confusion. So don't both if MD_RECOVERY_RUNNING isn't set, but if it is do the flush and the test and the reap all under the mddev_lock to avoid any race with md_check_recovery. Signed-off-by: NNeilBrown <neilb@suse.de> Fixes: 6791875e ("md: make reconfig_mutex optional for writes to md sysfs files.") Cc: stable@vger.kernel.org (v4.0+)
-
由 NeilBrown 提交于
Returning zero from a 'store' function is bad. The return value should be either len length of the string or an error. So use 'len' if 'err' is zero. Fixes: 6791875e ("md: make reconfig_mutex optional for writes to md sysfs files.") Signed-off-by: NNeilBrown <neilb@suse.de> Cc: stable@vger.kernel (v4.0+)
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "i915 and radeon fixes: i915: fix for connector oops regression DDC probing fix radeon: two radeon reverts, along with a freeze workaround and a fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: Make sure radeon_vm_bo_set_addr always unreserves the BO Revert "drm/radeon: adjust pll when audio is not enabled" Revert "drm/radeon: don't share plls if monitors differ in audio support" drm/radeon: fix freeze for laptop with Turks/Thames GPU. drm/i915: Fix DDC probe for passive adapters drm/i915: Properly initialize SDVO analog connectors
-
由 Shaohua Li 提交于
We saw excessive direct memory compaction triggered by skb_page_frag_refill. This causes performance issues and add latency. Commit 5640f768 introduces the order-3 allocation. According to the changelog, the order-3 allocation isn't a must-have but to improve performance. But direct memory compaction has high overhead. The benefit of order-3 allocation can't compensate the overhead of direct memory compaction. This patch makes the order-3 page allocation atomic. If there is no memory pressure and memory isn't fragmented, the alloction will still success, so we don't sacrifice the order-3 benefit here. If the atomic allocation fails, direct memory compaction will not be triggered, skb_page_frag_refill will fallback to order-0 immediately, hence the direct memory compaction overhead is avoided. In the allocation failure case, kswapd is waken up and doing compaction, so chances are allocation could success next time. alloc_skb_with_frags is the same. The mellanox driver does similar thing, if this is accepted, we must fix the driver too. V3: fix the same issue in alloc_skb_with_frags as pointed out by Eric V2: make the changelog clearer Cc: Eric Dumazet <edumazet@google.com> Cc: Chris Mason <clm@fb.com> Cc: Debabrata Banerjee <dbavatar@gmail.com> Signed-off-by: NShaohua Li <shli@fb.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
Fix for the regression Linus called out, and another for probing dongles. * tag 'drm-intel-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel: drm/i915: Fix DDC probe for passive adapters drm/i915: Properly initialize SDVO analog connectors
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
Two regression reverts, and two fixes, one for a dpm boot freeze. * 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: Make sure radeon_vm_bo_set_addr always unreserves the BO Revert "drm/radeon: adjust pll when audio is not enabled" Revert "drm/radeon: don't share plls if monitors differ in audio support" drm/radeon: fix freeze for laptop with Turks/Thames GPU.
-
由 Robert Shearman 提交于
If a device is renamed and the original name is subsequently reused for a new device, the following warning is generated: sysctl duplicate entry: /net/mpls/conf/veth0//input CPU: 3 PID: 1379 Comm: ip Not tainted 4.1.0-rc4+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 0000000000000000 0000000000000000 ffffffff81566aaf 0000000000000000 ffffffff81236279 ffff88002f7d7f00 0000000000000000 ffff88000db336d8 ffff88000db33698 0000000000000005 ffff88002e046000 ffff8800168c9280 Call Trace: [<ffffffff81566aaf>] ? dump_stack+0x40/0x50 [<ffffffff81236279>] ? __register_sysctl_table+0x289/0x5a0 [<ffffffffa051a24f>] ? mpls_dev_notify+0x1ff/0x300 [mpls_router] [<ffffffff8108db7f>] ? notifier_call_chain+0x4f/0x70 [<ffffffff81470e72>] ? register_netdevice+0x2b2/0x480 [<ffffffffa0524748>] ? veth_newlink+0x178/0x2d3 [veth] [<ffffffff8147f84c>] ? rtnl_newlink+0x73c/0x8e0 [<ffffffff8147f27a>] ? rtnl_newlink+0x16a/0x8e0 [<ffffffff81459ff2>] ? __kmalloc_reserve.isra.30+0x32/0x90 [<ffffffff8147ccfd>] ? rtnetlink_rcv_msg+0x8d/0x250 [<ffffffff8145b027>] ? __alloc_skb+0x47/0x1f0 [<ffffffff8149badb>] ? __netlink_lookup+0xab/0xe0 [<ffffffff8147cc70>] ? rtnetlink_rcv+0x30/0x30 [<ffffffff8149e7a0>] ? netlink_rcv_skb+0xb0/0xd0 [<ffffffff8147cc64>] ? rtnetlink_rcv+0x24/0x30 [<ffffffff8149df17>] ? netlink_unicast+0x107/0x1a0 [<ffffffff8149e4be>] ? netlink_sendmsg+0x50e/0x630 [<ffffffff8145209c>] ? sock_sendmsg+0x3c/0x50 [<ffffffff81452beb>] ? ___sys_sendmsg+0x27b/0x290 [<ffffffff811bd258>] ? mem_cgroup_try_charge+0x88/0x110 [<ffffffff811bd5b6>] ? mem_cgroup_commit_charge+0x56/0xa0 [<ffffffff811d7700>] ? do_filp_open+0x30/0xa0 [<ffffffff8145336e>] ? __sys_sendmsg+0x3e/0x80 [<ffffffff8156c3f2>] ? system_call_fastpath+0x16/0x75 Fix this by unregistering the previous sysctl table (registered for the path containing the original device name) and re-registering the table for the path containing the new device name. Fixes: 37bde799 ("mpls: Per-device enabling of packet input") Reported-by: NScott Feldman <sfeldma@gmail.com> Signed-off-by: NRobert Shearman <rshearma@brocade.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
When programming the start of a periodic output, the code wrongly places the seconds value into the "low" register and the nanoseconds into the "high" register. Even though this is backwards, it slipped through my testing, because the re-arming code in the interrupt service routine is correct, and the signal does appear starting with the second edge. This patch fixes the issue by programming the registers correctly. Signed-off-by: NRichard Cochran <richardcochran@gmail.com> Reviewed-by: NJacob Keller <jacob.e.keller@intel.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Weinberger 提交于
Not all architectures have io memory. Fixes: drivers/block/pmem.c: In function ‘pmem_alloc’: drivers/block/pmem.c:146:2: error: implicit declaration of function ‘ioremap_nocache’ [-Werror=implicit-function-declaration] pmem->virt_addr = ioremap_nocache(pmem->phys_addr, pmem->size); ^ drivers/block/pmem.c:146:18: warning: assignment makes pointer from integer without a cast [enabled by default] pmem->virt_addr = ioremap_nocache(pmem->phys_addr, pmem->size); ^ drivers/block/pmem.c:182:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(pmem->virt_addr); ^ Signed-off-by: NRichard Weinberger <richard@nod.at> Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Linus Torvalds 提交于
Merge tag 'trace-rb-bm-fix-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ring buffer benchmark buglet fix from Steven Rostedt: "Wang Long fixed a minor bug in the module parameter for the ring buffer benchmark, where the produce_fifo was being ignored and the producer thread's priority was being set with the consumer_fifo parameter" * tag 'trace-rb-bm-fix-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer-benchmark: Fix the wrong sched_priority of producer
-
- 11 6月, 2015 9 次提交
-
-
由 Dan Williams 提交于
================================= [ INFO: inconsistent lock state ] 4.1.0-rc7+ #217 Tainted: G O --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (ext_devt_lock){+.?...}, at: [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70 {SOFTIRQ-ON-W} state was registered at: [<ffffffff810bf6b1>] __lock_acquire+0x461/0x1e70 [<ffffffff810c1947>] lock_acquire+0xb7/0x290 [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50 [<ffffffff8143a07d>] blk_alloc_devt+0x6d/0xd0 <-- take the lock in process context [..] [<ffffffff810bf64e>] __lock_acquire+0x3fe/0x1e70 [<ffffffff810c00ad>] ? __lock_acquire+0xe5d/0x1e70 [<ffffffff810c1947>] lock_acquire+0xb7/0x290 [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70 [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50 [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70 [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70 <-- take the lock in softirq [<ffffffff8143bfec>] part_release+0x1c/0x50 [<ffffffff8158edf6>] device_release+0x36/0xb0 [<ffffffff8145ac2b>] kobject_cleanup+0x7b/0x1a0 [<ffffffff8145aad0>] kobject_put+0x30/0x70 [<ffffffff8158f147>] put_device+0x17/0x20 [<ffffffff8143c29c>] delete_partition_rcu_cb+0x16c/0x180 [<ffffffff8143c130>] ? read_dev_sector+0xa0/0xa0 [<ffffffff810e0e0f>] rcu_process_callbacks+0x2ff/0xa90 [<ffffffff810e0dcf>] ? rcu_process_callbacks+0x2bf/0xa90 [<ffffffff81067e2e>] __do_softirq+0xde/0x600 Neil sees this in his tests and it also triggers on pmem driver unbind for the libnvdimm tests. This fix is on top of an initial fix by Keith for incorrect usage of mutex_lock() in this path: 2da78092 "block: Fix dev_t minor allocation lifetime". Both this and 2da78092 are candidates for -stable. Fixes: 2da78092 ("block: Fix dev_t minor allocation lifetime") Cc: <stable@vger.kernel.org> Cc: Keith Busch <keith.busch@intel.com> Reported-by: NNeilBrown <neilb@suse.de> Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Michel Dänzer 提交于
Some error paths didn't unreserve the BO. This resulted in a deadlock down the road on the next attempt to reserve the (still reserved) BO. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90873 Cc: stable@vger.kernel.org Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
This reverts commit 7fe04d6f. Fixes some systems at the expense of others. Need to properly fix the pll divider selection. bug: https://bugzilla.kernel.org/show_bug.cgi?id=99651 Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
This reverts commit a10f0df0. Fixes some systems at the expense of others. Need to properly fix the pll divider selection. bug: https://bugzilla.kernel.org/show_bug.cgi?id=99651 Cc: stable@vger.kernel.org
-
由 Jérôme Glisse 提交于
Laptop with Turks/Thames GPU will freeze if dpm is enabled. It seems the SMC engine is relying on some state inside the CP engine. CP needs to chew at least one packet for it to get in good state for dynamic power management. This patch simply disabled and re-enable DPM after the ring test which is enough to avoid the freeze. Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Wang Long 提交于
The producer should be used producer_fifo as its sched_priority, so correct it. Link: http://lkml.kernel.org/r/1433923957-67842-1-git-send-email-long.wanglong@huawei.com Cc: stable@vger.kernel.org # 2.6.33+ Signed-off-by: NWang Long <long.wanglong@huawei.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
When incoming packet qualifies for rx_copybreak, we copy the data to newly allocated skb. We do not free/unmap the original buffer. At this point driver assumes this buffer is unallocated. When enic_rq_alloc_buf() is called for buffer allocation, it checks if buf->os_buf is NULL. If its not NULL that means buffer can be re-used. When vnic_rq_clean() is called for freeing all rq buffers, and if the rx_copybreak reused buffer falls outside the used desc, we do not free the buffer. The following trace is observer when dma-debug is enabled. Fix is to walk through complete ring and clean if buffer is present. [ 40.555386] ------------[ cut here ]------------ [ 40.555396] WARNING: CPU: 0 PID: 491 at lib/dma-debug.c:971 dma_debug_device_change+0x188/0x1f0() [ 40.555400] pci 0000:06:00.0: DMA-API: device driver has pending DMA allocations while released from device [count=4] One of leaked entries details: [device address=0x00000000ff4cc040] [size=9018 bytes] [mapped with DMA_FROM_DEVICE] [mapped as single] [ 40.555402] Modules linked in: nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 dns_resolver coretemp intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw joydev mousedev gf128mul hid_generic glue_helper mgag200 usbhid ttm hid drm_kms_helper drm ablk_helper syscopyarea sysfillrect sysimgblt i2c_algo_bit i2c_core iTCO_wdt cryptd mac_hid evdev pcspkr sb_edac edac_core tpm_tis iTCO_vendor_support ipmi_si wmi tpm ipmi_msghandler shpchp lpc_ich processor acpi_power_meter hwmon button ac sch_fq_codel nfs lockd grace sunrpc fscache sd_mod ehci_pci ehci_hcd megaraid_sas usbcore scsi_mod usb_common enic(-) crc32c_generic crc32c_intel btrfs xor raid6_pq ext4 crc16 mbcache jbd2 [ 40.555467] CPU: 0 PID: 491 Comm: rmmod Not tainted 4.1.0-rc7-ARCH-01305-gf59b71f #118 [ 40.555469] Hardware name: Cisco Systems Inc UCSB-B200-M4/UCSB-B200-M4, BIOS B200M4.2.2.2.23.061220140128 06/12/2014 [ 40.555471] 0000000000000000 00000000e2f8a5b7 ffff880275f8bc48 ffffffff8158d6f0 [ 40.555474] 0000000000000000 ffff880275f8bca0 ffff880275f8bc88 ffffffff8107b04a [ 40.555477] ffff8802734e0000 0000000000000004 ffff8804763fb3c0 ffff88027600b650 [ 40.555480] Call Trace: [ 40.555488] [<ffffffff8158d6f0>] dump_stack+0x4f/0x7b [ 40.555492] [<ffffffff8107b04a>] warn_slowpath_common+0x8a/0xc0 [ 40.555494] [<ffffffff8107b0d5>] warn_slowpath_fmt+0x55/0x70 [ 40.555498] [<ffffffff812fa408>] dma_debug_device_change+0x188/0x1f0 [ 40.555503] [<ffffffff8109aaef>] notifier_call_chain+0x4f/0x80 [ 40.555506] [<ffffffff8109aecb>] __blocking_notifier_call_chain+0x4b/0x70 [ 40.555510] [<ffffffff8109af06>] blocking_notifier_call_chain+0x16/0x20 [ 40.555514] [<ffffffff813f8066>] __device_release_driver+0xf6/0x120 [ 40.555518] [<ffffffff813f8b08>] driver_detach+0xc8/0xd0 [ 40.555523] [<ffffffff813f7c59>] bus_remove_driver+0x59/0xe0 [ 40.555527] [<ffffffff813f93a0>] driver_unregister+0x30/0x70 [ 40.555534] [<ffffffff8131532d>] pci_unregister_driver+0x2d/0xa0 [ 40.555542] [<ffffffffa0200ec2>] enic_cleanup_module+0x10/0x14e [enic] [ 40.555547] [<ffffffff8110158f>] SyS_delete_module+0x1cf/0x280 [ 40.555551] [<ffffffff811e284e>] ? ____fput+0xe/0x10 [ 40.555554] [<ffffffff810980ec>] ? task_work_run+0xbc/0xf0 [ 40.555558] [<ffffffff815930ee>] system_call_fastpath+0x12/0x71 [ 40.555561] ---[ end trace 4988cadc77c2b236 ]--- [ 40.555562] Mapped at: [ 40.555563] [<ffffffff812fa865>] debug_dma_map_page+0x95/0x150 [ 40.555566] [<ffffffffa01f4a88>] enic_rq_alloc_buf+0x1b8/0x360 [enic] [ 40.555570] [<ffffffffa01f7658>] enic_open+0xf8/0x820 [enic] [ 40.555574] [<ffffffff8148d50e>] __dev_open+0xce/0x150 [ 40.555579] [<ffffffff8148d851>] __dev_change_flags+0xa1/0x170 Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
We do not check the return value of enic_dev_stats_dump(). If allocation fails, we will hit NULL pointer reference. Return only if memory allocation fails. For other failures, we return the previously recorded values. Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
There is a small window between vnic_intr_unmask() and enic_poll_unlock_napi(). In this window if an irq occurs and napi is scheduled on different cpu, it tries to acquire enic_poll_lock_napi() and hits the following WARN_ON message. Fix is to unlock napi_poll before unmasking the interrupt. [ 781.121746] ------------[ cut here ]------------ [ 781.121789] WARNING: CPU: 1 PID: 0 at drivers/net/ethernet/cisco/enic/vnic_rq.h:228 enic_poll_msix_rq+0x36a/0x3c0 [enic]() [ 781.121834] Modules linked in: nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 dns_resolver coretemp intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel mgag200 ttm drm_kms_helper joydev aes_x86_64 lrw drm gf128mul mousedev glue_helper sb_edac ablk_helper iTCO_wdt iTCO_vendor_support evdev ipmi_si syscopyarea sysfillrect sysimgblt i2c_algo_bit i2c_core edac_core lpc_ich mac_hid cryptd pcspkr ipmi_msghandler shpchp tpm_tis acpi_power_meter tpm wmi processor hwmon button ac sch_fq_codel nfs lockd grace sunrpc fscache hid_generic usbhid hid ehci_pci ehci_hcd sd_mod megaraid_sas usbcore scsi_mod usb_common enic crc32c_generic crc32c_intel btrfs xor raid6_pq ext4 crc16 mbcache jbd2 [ 781.122176] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.0-rc6-ARCH-00040-gc46a024e-dirty #106 [ 781.122210] Hardware name: Cisco Systems Inc UCSB-B200-M4/UCSB-B200-M4, BIOS B200M4.2.2.2.23.061220140128 06/12/2014 [ 781.122252] 0000000000000000 bddbbc9d655ec96e ffff880277e43da8 ffffffff81583fe8 [ 781.122286] 0000000000000000 0000000000000000 ffff880277e43de8 ffffffff8107acfa [ 781.122319] ffff880272c01000 ffff880273f18000 ffff880273f1a100 0000000000000000 [ 781.122352] Call Trace: [ 781.122364] <IRQ> [<ffffffff81583fe8>] dump_stack+0x4f/0x7b [ 781.122399] [<ffffffff8107acfa>] warn_slowpath_common+0x8a/0xc0 [ 781.122425] [<ffffffff8107ae2a>] warn_slowpath_null+0x1a/0x20 [ 781.122455] [<ffffffffa01fa9ca>] enic_poll_msix_rq+0x36a/0x3c0 [enic] [ 781.122487] [<ffffffff8148525a>] net_rx_action+0x22a/0x370 [ 781.122512] [<ffffffff8107ed3d>] __do_softirq+0xed/0x2d0 [ 781.122537] [<ffffffff8107f06e>] irq_exit+0x7e/0xa0 [ 781.122560] [<ffffffff8158c424>] do_IRQ+0x64/0x100 [ 781.122582] [<ffffffff8158a42e>] common_interrupt+0x6e/0x6e [ 781.122605] <EOI> [<ffffffff810bd331>] ? cpu_startup_entry+0x121/0x480 [ 781.122638] [<ffffffff810bd2fc>] ? cpu_startup_entry+0xec/0x480 [ 781.122667] [<ffffffff810f2ed3>] ? clockevents_register_device+0x113/0x1f0 [ 781.122698] [<ffffffff81050ab6>] start_secondary+0x196/0x1e0 [ 781.122723] ---[ end trace cec2e9dd3af7b9db ]--- Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-