- 13 7月, 2016 6 次提交
-
-
由 Hans Verkuil 提交于
Lots of fixups relating to references. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Fix those warnings: Documentation/output/videodev2.h.rst:6: WARNING: undefined label: vidioc_unsubscribe_event (if the link has no caption the label must precede a section header) Documentation/media/uapi/v4l/dev-overlay.rst:248: WARNING: Title underline too short. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
This patch touches on places where it shouldn't: image files and code examples. Also, it doesn't fix all array occurrences. So, let's revert it. This reverts commit ffbab694.
-
由 Hans Verkuil 提交于
The timestamp field was split into rx_ts and tx_ts, and the rx/tx_status fields were moved. Update the doc accordingly. Also fix a bug that stated that a non-zero tx_status field signaled an error. That's not true, since TX_STATUS_OK is 1, not 0. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Those characters are used for citations. Better to escape, to avoid them to be misinterpreted. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
According with ReST spec, footnotes should be like: [#name], and not [name]. So, change them. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 12 7月, 2016 18 次提交
-
-
由 Hans Verkuil 提交于
Document V4L2_DV_PROGRESSIVE and V4L2_DV_INTERLACED and fix missing references. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
Fix missing documentation, and its cross reference. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Fix it by adding a header to the flat-table to match to the list of define symbols. As a side-effect, it also removes some exceptions from videodev2.h.rst. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Reorganize the LIRC rst files, using "-" instead of "_" on their names, and creating a separate chapter for syscalls. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Add LIRC_SET_[REC|SEND]_MODE ioctls to the corresponding GET functions, and put all LIRC modes altogether. As now everything is already documented on its own ioctl pages, get rid of lirc_ioctl.rst. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Put documentation for this ioctl on a separate page and improve it. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Place documentation for this ioctl on its own page. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Add a separate page for this ioctl and improve its documentation. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Add a separate page for this ioctl and adds the cross-references. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Add proper documentation for this ioctl, providing some additional information about its usage. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Put each ioctl on its own page and improve documentation, adding cross-references for LIRC_SET_REC_CARRIER_RANGE and LIRC_SET_REC_CARRIER, with can be used together to set a carrier frequency range. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Put documentation for this ioctl on its own page. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Improve the documentation for those ioctls, adding them to a separate file, in order to look like the rest of the book, and to later allow to generate a man page for those ioctls. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Add a separate page for this ioctl. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Improve the documentation for this ioctl, adding it to a separate file, in order to look like the rest of the book, and to later allow to generate a man page for this ioctl. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Move the documentation of this ioctl from lirc_ioctl to its own file, and add a short description about the pulse mode used by IR RX. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Some references were broken. It was also mentioning LIRC_MODE_RAW, with it is not implemented on current LIRC drivers. So, fix the references. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Move the documentation of this ioctl from lirc_ioctl to its own file, and add a short description about the pulse mode used by IR TX. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 11 7月, 2016 5 次提交
-
-
由 Mauro Carvalho Chehab 提交于
The references pointed by LIRC_GET_FEATURES ioctl are broken. Fix them. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
As we removed those ioctls from the header file, do the same at the documentation side. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
While reviewing the documentation gaps on LIRC, it was noticed that several ioctls aren't used by any LIRC drivers (nor at staging or mainstream). It doesn't make sense to document them, as they're not used anywhere. So, let's remove those from the lirc header. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
changeset 68cd5e0b ("[media] doc-rst: add LIRC header to the book") did everything but adding the lirc-reader.rst :-p My fault: I forgot to do a git add for this guy on such changeset. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
The documentation for this ioctl was really crappy. Add a better documentation, using the lirc.4 man pages as a reference, plus what was written originally at the lirc-ioctl. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 10 7月, 2016 10 次提交
-
-
由 Mauro Carvalho Chehab 提交于
There are several notes and warning mesages in the middle of the media docbook. Use the ReST tags for that, as it makes them visually better and hightlights them. While here, modify a few ones to make them clearer. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
There are several notes for this DTV property. Some are outdated, so take some care of it, making it updated. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Make the note better formatted and documented. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Unfortunately, captions are new on Sphinx for c blocks: it was added only on version 1.3. Also, it were already bad enough not being able to auto-numerate them. So, let's give up and use, instead, titles before the examples. Not much is lost, and, as a side track, we don't need to numerate them anymore. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Now that the LIRC header was added, we can cross-reference it and identify the documentation gaps. There are lots of stuff missing there, but at least now we can avoid the gap to increase. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Just like the other parts of the document, let's add the LIRC header, as it is part of the API. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
The lirc syscall documentation uses a very different and simplified way than the rest of the media book. make it closer. Still, there's just one page for all ioctls. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Some files start with an upper letter. Also, they have big names. rename them. No functional changes. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
There's no need to say: Table of Contents there. Also, this generates a duplicated caption xref. So, remove, to use the same format on every part. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Just like the other parts of the media book, group the MC functions together on one chapter. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 09 7月, 2016 1 次提交
-
-
由 Markus Heiser 提交于
Within the old section hierarchy, all doc parts has been placed under the introduction, e.g: * Linux Media Infrastructure API + Introduction - Video for Linux API - Digital TV API - ... With separating the introduction sibling to the other parts we get a more common section hierarchy: * Linux Media Infrastructure API + Introduction + Video for Linux API + Digital TV API + ... BTW: compacting the intro text. This patch is on top of media_tree/docs-next Signed-off-by: NMarkus Heiser <markus.heiser@darmarIT.de>
-