- 06 10月, 2012 1 次提交
-
-
由 Fengguang Wu 提交于
To avoid name conflicts: drivers/video/riva/fbdev.c:281:9: sparse: preprocessor token MAX_LEVEL redefined While at it, also make the other names more consistent and add parentheses. [akpm@linux-foundation.org: repair fallout] [sfr@canb.auug.org.au: IB/mlx4: fix for MAX_ID_MASK to MAX_IDR_MASK name change] Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at> Cc: walter harms <wharms@bfs.de> Cc: Glauber Costa <glommer@parallels.com> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 10月, 2012 2 次提交
-
-
由 Or Gerlitz 提交于
Add the rtnl_link_ops changelink and fill_info callbacks, through which the admin can now set/get the driver mode, etc policies. Maintain the proprietary sysfs entries only for legacy childs. For child devices, set dev->iflink to point to the parent device ifindex, such that user space tools can now correctly show the uplink relation as done for vlan, macvlan, etc devices. Pointed out by Patrick McHardy <kaber@trash.net> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Marciniszyn 提交于
Commit 8aac4cc3 ("IB/qib: RCU locking for MR validation") introduced a bug that broke user post sends. The proper validation of the MR was lost in the patch. This patch corrects that validation. Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 01 10月, 2012 31 次提交
-
-
由 Bart Van Assche 提交于
We need to call scsi_done() for commands after we abort them. Signed-off-by: NBart Van Assche <bvanassche@acm.org> Acked-by: NDavid Dillow <dillowda@ornl.gov> Cc: <stable@vger.kernel.org> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Bart Van Assche 提交于
srp_free_req() uses the scsi_cmnd structure contents to unmap buffers, so we must invoke srp_free_req() before we release ownership of that structure. Signed-off-by: NBart Van Assche <bvanassche@acm.org> Acked-by: NDavid Dillow <dillowda@ornl.gov> Cc: <stable@vger.kernel.org> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Dean Luick 提交于
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Tatyana Nikolova 提交于
Removing old variables caused a compile error from nes_debug(). Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Tatyana Nikolova 提交于
Hardware resource types are added and when a resource isn't available, its type is printed. Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Tatyana Nikolova 提交于
When TX checksum offload is disabled for an iWarp connection, skb->ip_summed needs to be set to CHECKSUM_NONE. Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Tatyana Nikolova 提交于
- Remove unnecessary statement "if (1)" - Refactor a statement (wqe_misc |= NES_NIC_SQ_WQE_COMPLETION) out of if/else statement, because it is independant of the flow. - Define netdev->features in one line for clarity. Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Tatyana Nikolova 提交于
In TSO handling code, skb_shared_info() is used to get the MSS instead of the bool function skb_is_gso() (which always returns 1). Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Tatyana Nikolova 提交于
Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Jack Morgenstein 提交于
When we have VFs and PFs on same host, the VFs are activated within the mlx4_core module before the mlx4_ib kernel module is loaded. When the mlx4_ib module initializes the PF (master), it now creates MAD paravirtualization contexts for any VFs that already active. Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Jack Morgenstein 提交于
Previously, the structure of a guest's proxy QPs followed the structure of the PPF special qps (qp0 port 1, qp0 port 2, qp1 port 1, qp1 port 2, ...). The guest then did offset calculations on the sqp_base qp number that the PPF passed to it in QUERY_FUNC_CAP(). This is now changed so that the guest does no offset calculations regarding proxy or tunnel QPs to use. This change frees the PPF from needing to adhere to a specific order in allocating proxy and tunnel QPs. Now QUERY_FUNC_CAP provides each port individually with its proxy qp0, proxy qp1, tunnel qp0, and tunnel qp1 QP numbers, and these are used directly where required (with no offset calculations). To accomplish this change, several fields were added to the phys_caps structure for use by the PPF and by non-SR-IOV mode: base_sqpn -- in non-sriov mode, this was formerly sqp_start. base_proxy_sqpn -- the first physical proxy qp number -- used by PPF base_tunnel_sqpn -- the first physical tunnel qp number -- used by PPF. The current code in the PPF still adheres to the previous layout of sqps, proxy-sqps and tunnel-sqps. However, the PPF can change this layout without affecting VF or (paravirtualized) PF code. Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Jack Morgenstein 提交于
This is necessary in order to support > 1 VF/PF in a VM for software that uses the node guid as a discriminator, such as librdmacm. Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Jack Morgenstein 提交于
Remove the error returns for IB ports from mlx4_ib_add, mlx4_INIT_PORT_wrapper, and mlx4_CLOSE_PORT_wrapper. Currently, SRIOV is supported only for devices for which the link layer is IB on all ports; RoCE support will be added later. Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Jack Morgenstein 提交于
1. Allow only master to change node description. 2. Prevent AH leakage in send mads. 3. Take device part number from PCI structure, so that guests see the VF part number (and not the PF part number). 4. Place the device revision ID into caps structure at startup. 5. SET_PORT in update_gids_task needs to go through wrapper on master. 6. In mlx4_ib_event(), PORT_MGMT_EVENT needs be handled in a work queue on the master, since it propagates events to slaves using GEN_EQE. 7. Do not support FMR on slaves. 8. Add spinlock to slave_event(), since it is called both in interrupt context and in process context (due to 6 above, and also if smp_snoop is used). This fix was found and implemented by Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Jack Morgenstein 提交于
This directory is added only for the master -- slaves do not have it. The sysfs iov directory is used to manage and examine the port P_Key and guid paravirtualization. Under iov/ports, the administrator may examine the gid and P_Key tables as they are present in the device (and as are seen in the "network view" presented to the SM). Under the iov/<pci slot number> directories, the admin may map the index numbers in the physical tables (as under iov/ports) to the paravirtualized index numbers that guests see. For example, if the administrator, for port 1 on guest 2 maps physical pkey index 10 to virtual index 1, then that guest, whenever it uses its pkey index 1, will actually be using the real pkey index 10. Based on patch from Erez Shitrit <erezsh@mellanox.com> Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Jack Morgenstein 提交于
P_Key change and guid change events are not of interest to all slaves, but only to those slaves which "see" the table slots whose contents have change. For example, if the guid at port 1, index 5 has changed in the PPF, we wish to propagate the gid-change event only to the function which has that guid index mapped to its port/guid table (in this case it is slave #5). Other functions should not get the event, since the event does not affect them. Similarly with P_Keys -- P_Key change events are forwarded only to slaves which have that P_Key index mapped to their virtual P_Key table. Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Jack Morgenstein 提交于
For IB ports, we paravirtualize the GUID at index 0 on slaves. The GUID at index 0 seen by a slave is the actual GUID occupying the GUID table at the slave-id index. The driver, by default, requests at startup time that subnet manager populate its entire guid table with GUIDs. These guids are then mapped (paravirtualized) to the slaves, and appear for each slave as its GUID at index 0. Until each slave has such a guid, its port status is DOWN. The guid table is cached to support special QP paravirtualization, and event propagation to slaves on guid change (we test to see if the guid really changed before propagating an event to the slave). To support this caching, add capability to __mlx4_ib_query_gid() to obtain the network view (i.e., physical view) gid at index X, not just the host (paravirtualized) view. Based on a patch from Erez Shitrit <erezsh@mellanox.com> Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Amir Vadai 提交于
In CM para-virtualization: 1. Incoming requests are steered to the correct vHCA according to the embedded GID. 2. Communication IDs on outgoing requests are replaced by a globally unique ID, generated by the PPF, since there is no synchronization of ID generation between guests (and so these IDs are not guaranteed to be globally unique). The guest's comm ID is stored, and is returned to the response MAD when it arrives. Signed-off-by: NAmir Vadai <amirv@mellanox.co.il> Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Oren Duer 提交于
MCG paravirtualization support includes: - Creating multicast groups by VFs, and keeping accounting of them - Leaving multicast groups by VFs - Updating SM only with real changes in the overall picture of MCGs status - Creation of MGID=0 groups (let SM choose MGID) Note that the MCG module maintains its own internal MCG object reference counts. The reason for this is that the IB core is used to track only the multicast groups joins generated by the PF it runs over. The PF IB core layer is unaware of slaves, so it cannot be used to keep track of MCG joins they generate. Signed-off-by: NOren Duer <oren@mellanox.co.il> Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Jack Morgenstein 提交于
The MAD_IFC firmware command fulfills two functions. First, it is used in the QP0/QP1 MAD-handling flow to obtain information from the FW (for answering queries), and for setting variables in the HCA (MAD SET packets). For this, MAD_IFC should provide the FW (physical) view of the data. This is the view that OpenSM needs. We call this the "network view". In the second case, MAD_IFC is used by various verbs to obtain data regarding the local HCA (e.g., ib_query_device()). We call this the "host view". This data needs to be paravirtualized. MAD_IFC therefore needs a wrapper function, and also needs another flag indicating whether it should provide the network view (when it is called by ib_process_mad in special-qp packet handling), or the host view (when it is called while implementing a verb). There are currently 2 flag parameters in mlx4_MAD_IFC already: ignore_bkey and ignore_mkey. These two parameters are replaced by a single "mad_ifc_flags" parameter, with different bits set for each flag. A third flag is added: "network-view/host-view". Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Jack Morgenstein 提交于
Special QPs are paravirtualized. vHCAs are not given direct access to QP0/1. Rather, these QPs are operated by a special context hosted by the PF, which mediates access to/from vHCAs. This is done by opening a "tunnel" per vHCA port per QP0/1. A tunnel comprises a pair of UD QPs: a "Tunnel QP" in the PF-context and a "Proxy QP" in the vHCA. All vHCA MAD traffic must pass through the corresponding tunnel. vHCA QPs cannot be assigned to VL15 and are denied of the well-known QKey. Outgoing messages are "de-multiplexed" (i.e., directed to the wire via the real special QP). Incoming messages are "multiplexed" (i.e. steered by the PPF to the correct VF or to the PF) QP0 access is restricted to the PF vHCA. VF vHCAs also have (virtual) QP0s, but they never receive any SMPs and all SMPs sent are discarded. QP1 traffic is allowed for all vHCAs, but special care is required to bridge the gap between the host and network views. Specifically: - Transaction IDs are mapped to guarantee uniqueness among vHCAs - CM para-virtualization o Incoming requests are steered to the correct vHCA according to the embedded GID o Local communication IDs are mapped to ensure uniqueness among vHCAs (see the patch that adds CM paravirtualization.) - Multicast para-virtualization o The PF context aggregates membership state from all vHCAs o The SA is contacted only when the aggregate membership changes o If the aggregate does not change, the PF context will provide the requesting vHCA with the proper response. (see the patch that adds multicast group paravirtualization) Incoming MADs are steered according to: - the DGID If a GRH is present - the mapped transaction ID for response MADs - the embedded GID in CM requests - the remote communication ID in other CM messages Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Jack Morgenstein 提交于
This requires: 1. Replacing the paravirtualized P_Key index (inserted by the guest) with the real P_Key index. 2. For UD QPs, placing the guest's true source GID index in the address path structure mgid field, and setting the ud_force_mgid bit so that the mgid is taken from the QP context and not from the WQE when posting sends. 3. For UC and RC QPs, placing the guest's true source GID index in the address path structure mgid field. 4. For tunnel and proxy QPs, setting the Q_Key value reserved for that proxy/tunnel pair. Since not all the above adjustments occur in all the QP transitions, the QP transitions require separate wrapper functions. Secondly, initialize the P_Key virtualization table to its default values: Master virtualized table is 1-1 with the real P_Key table, guest virtualized table has P_Key index 0 mapped to the real P_Key index 0, and all the other P_Key indices mapped to the reserved (invalid) P_Key at index 127. Finally, add logic in smp_snoop for maintaining the phys_P_Key_cache. and generating events on the master only if a P_Key actually changed. Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Jack Morgenstein 提交于
Allocate SR-IOV paravirtualization resources and MAD demuxing contexts on the master. This has two parts. The first part is to initialize the structures to contain the contexts. This is done at master startup time in mlx4_ib_init_sriov(). The second part is to actually create the tunneling resources required on the master to support a slave. This is performed the master detects that a slave has started up (MLX4_DEV_EVENT_SLAVE_INIT event generated when a slave initializes its comm channel). For the master, there is no such startup event, so it creates its own tunneling resources when it starts up. In addition, the master also creates the real special QPs. The ib_core layer on the master causes creation of proxy special QPs, since the master is also paravirtualized at the ib_core layer. Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Jack Morgenstein 提交于
1. Introduce the basic SR-IOV parvirtualization context objects for multiplexing and demultiplexing MADs. 2. Introduce support for the new proxy and tunnel QP types. This patch introduces the objects required by the master for managing QP paravirtualization for guests. struct mlx4_ib_sriov is created by the master only. It is a container for the following: 1. All the info required by the PPF to multiplex and de-multiplex MADs (including those from the PF). (struct mlx4_ib_demux_ctx demux) 2. All the info required to manage alias GUIDs (i.e., the GUID at index 0 that each guest perceives. In fact, this is not the GUID which is actually at index 0, but is, in fact, the GUID which is at index[<VF number>] in the physical table. 3. structures which are used to manage CM paravirtualization 4. structures for managing the real special QPs when running in SR-IOV mode. The real SQPs are controlled by the PPF in this case. All SQPs created and controlled by the ib core layer are proxy SQP. struct mlx4_ib_demux_ctx contains the information per port needed to manage paravirtualization: 1. All multicast paravirt info 2. All tunnel-qp paravirt info for the port. 3. GUID-table and GUID-prefix for the port 4. work queues. struct mlx4_ib_demux_pv_ctx contains all the info for managing the paravirtualized QPs for one slave/port. struct mlx4_ib_demux_pv_qp contains the info need to run an individual QP (either tunnel qp or real SQP). Note: We made use of the 2 most significant bits in enum mlx4_ib_qp_flags (based on enum ib_qp_create_flags in ib_verbs.h). We need these bits in the low-level driver for internal purposes. Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Jack Morgenstein 提交于
When P_Key tables potentially contain both full and partial membership copies for the same P_Key, we need a function to find the index for an exact (16-bit) P_Key. This is necessary when the master forwards QP1 MADs sent by guests. If the guest has sent the MAD with a limited membership P_Key, we need to to forward the MAD using the same limited membership P_Key. Since the master may have both the limited and the full member P_Keys in its table, we must make sure to retrieve the limited membership P_Key in this case. Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Jack Morgenstein 提交于
Extend the cached and non-cached P_Key table lookups to handle limited and full membership of the same P_Key to co-exist in the P_Key table. This is necessary for SR-IOV, to allow for some guests would to have the full membership P_Key in their virtual P_Key table, while other guests on the same physical HCA would have the limited one. To support this, we need both the limited and full membership P_Keys to be present in the master's (hypervisor physical port) P_Key table. The algorithm for handling P_Key tables which contain both the limited and the full membership versions of the same P_Key works as follows: When scanning the P_Key table for a 15-bit P_Key: A. If there is a full member version of that P_Key anywhere in the table, return its index (even if a limited-member version of the P_Key exists earlier in the table). B. If the full member version is not in the table, but the limited-member version is in the table, return the index of the limited P_Key. Signed-off-by: NLiran Liss <liranl@mellanox.com> Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Dotan Barak 提交于
Signed-off-by: NDotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Patrick McHardy 提交于
Fix a crash in ipoib_mcast_join_task(). (with help from Or Gerlitz) Commit c8c2afe3 ("IPoIB: Use rtnl lock/unlock when changing device flags") added a call to rtnl_lock() in ipoib_mcast_join_task(), which is run from the ipoib_workqueue, and hence the workqueue can't be flushed from the context of ipoib_stop(). In the current code, ipoib_stop() (which doesn't flush the workqueue) calls ipoib_mcast_dev_flush(), which goes and deletes all the multicast entries. This takes place without any synchronization with a possible running instance of ipoib_mcast_join_task() for the same ipoib device, leading to a crash due to NULL pointer dereference. Fix this by making sure that the workqueue is flushed before ipoib_mcast_dev_flush() is called. To make that possible, we move the RTNL-lock wrapped code to ipoib_mcast_join_finish(). Signed-off-by: NPatrick McHardy <kaber@trash.net> Cc: <stable@vger.kernel.org> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Emil Goode 提交于
The variable ret is assigned return values in a couple of places, but its value is never returned. This patch makes use of the ret variable so that the caller get correct error codes returned. The following changes are also introduced: - The alloc_oc_sq function can return -ENOSYS or -ENOMEM so we want to get the return value from it. - Change the label names to improve readability. Signed-off-by: NEmil Goode <emilgoode@gmail.com> Acked-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Dotan Barak 提交于
CMA multicast joins for the IPoIB port space need to use the same component mask used by the ipoib driver. Otherwise, it's possible for the CMA to create a group to which a join made by ipoib will fail, or vise-versa. Some of the component mask fields set by ipoib weren't set by the CMA, fix that. Signed-off-by: NDotan Barak <dotanb@dev.mellanox.co.il> Reviewed-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Acked-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Dotan Barak 提交于
Remove unused wait objects from ucm/ucma events flow. Signed-off-by: NDotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Acked-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 27 9月, 2012 2 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 21 9月, 2012 2 次提交
-
-
由 Eric W. Biederman 提交于
Acked-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Acked-by: NSerge Hallyn <serge.hallyn@canonical.com> Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
-
由 Or Gerlitz 提交于
Add rtnl_link_ops to IPoIB, with the first usage being child device create/delete through them. Childs devices are now either legacy ones, created/deleted through the ipoib sysfs entries, or RTNL ones. Adding support for RTNL childs involved refactoring of ipoib_vlan_add which is now used by both the sysfs and the link_ops code. Also, added ndo_uninit entry to support calling unregister_netdevice_queue from the rtnl dellink entry. This required removal of calls to ipoib_dev_cleanup from the driver in flows which use unregister_netdevice, since the networking core will invoke ipoib_uninit which does exactly that. Signed-off-by: NErez Shitrit <erezsh@mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 9月, 2012 2 次提交
-
-
由 Mike Marciniszyn 提交于
Commit 3236b2d4 ("IB/qib: MADs with misset M_Keys should return failure") introduced a return code assignment that unfortunately introduced an unconditional exit for the routine due to missing braces. This patch adds the braces to correct the original patch. Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Parav Pandit 提交于
Fix CQE expansion of unsignaled WQE -- don't expand the CQE when the WQE index of the completed CQE matches with last pending WQE (tail) in the queue. Signed-off-by: NParav Pandit <parav.pandit@emulex.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-