Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix the bug reported here:

	http://bugzilla.kernel.org/show_bug.cgi?id=10232

use update_memory_range() instead of add_memory_range() directly
to avoid closing the gap.

( the new code only affects and runs on systems where the MTRR
  workaround triggers. )
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

when MTRRs are not covering the whole e820 table, we need to trim the
RAM and need to update e820.

reuse some code on 64-bit as well.

here need to add early_get_cap and use it in early_cpu_detect, and move
mtrr_bp_init early.

The code successfully trimmed the memory map on Justin's system:

from:

 [    0.000000]  BIOS-e820: 0000000100000000 - 000000022c000000 (usable)

to:

 [    0.000000]   modified: 0000000100000000 - 0000000228000000 (usable)
 [    0.000000]   modified: 0000000228000000 - 000000022c000000 (reserved)

According to Justin it makes quite a difference:

|  When I boot the box without any trimming it acts like a 286 or 386,
|  takes about 10 minutes to boot (using raptor disks).
Signed-off-by: NYinghai Lu <yinghai.lu@sun.com>
Tested-by: NJustin Piszcz <jpiszcz@lucidpixels.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Because the EFI memory map are converted to e820 memory map in bootloader, the
EFI memory map handling code is removed to clean up.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch removes the extern struct resource declarations for
data_resource, code_resource and bss_resource on x86 and declares that
three structures as static as done on other architectures like IA64.

On i386, these structures are moved to setup_32.c (from e820_32.c) because
that's code that is not specific to e820 and also required on EFI systems.
That makes the "extern" reference superfluous.

On x86_64, data_resource, code_resource and bss_resource are passed to
e820_reserve_resources() as arguments just as done on i386 and IA64.  That
also avoids the "extern" reference and it's possible to make it static.
Signed-off-by: NBernhard Walle <bwalle@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

To actually write a bootloader (or, say, the lguest launcher)
currently requires duplication of these structures.  Making them
includable from userspace is much nicer.

We merge the common userspace-required definitions of e820_32/64.h
into e820.h for export.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Move the headers to include/asm-x86 and fixup the
header install make rules
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid
confusion (among other things, with CONFIG_SUSPEND introduced in the
next patch).
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On some systems the ACPI NVS area is located in the first 1 MB of RAM and
it is overwritten by the i386 code during the restore after hibernation.
This confuses the ACPI platform firmware that doesn't update the AC adapter
status appropriately as a result
(http://bugzilla.kernel.org/show_bug.cgi?id=7995).

The solution is to register the reserved memory in the first 1 MB as
'nosave', so that swsusp doesn't touch it during the restore.  Also, this
has been done on x86_64 for a long time now, so this patch makes the i386
restore code behave like the x86_64 one.

[akpm@linux-foundation.org: build fix]
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make definitions for struct e820entry and struct e820map
consistent between i386 and x86-64.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Under CONFIG_DISCONTIGMEM, assuming that a !pfn_valid() implies all
subsequent pfn-s are also invalid is wrong. Thus replace this by
explicitly checking against the E820 map.

AK: make e820 on x86-64 not initdata
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Acked-by: NMark Langsdorf <mark.langsdorf@amd.com>

register_memory() becomes double definition in 2.6.20-rc1.  It is defined
in arch/i386/kernel/setup.c as static definition in 2.6.19.  But it is
moved to arch/i386/kernel/e820.c in 2.6.20-rc1.  And same name function is
defined in driver/base/memory.c too.  So, it becomes cause of compile error
of duplicate definition if memory hotplug option is on.
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch moves e820 memory map print and memmap boot param
parsing function from setup.c to e820.c, also adds limit_regions
and print_memory_map declaration in header file.
Signed-off-by: Nbibo,mao <bibo.mao@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

 arch/i386/kernel/e820.c  |  152 +++++++++++++++++++++++++++
 arch/i386/kernel/setup.c |  158 ---------------------------------
 include/asm-i386/e820.h  |    2
 arch/i386/kernel/e820.c  |  152 ++++++++++++++++++++++++++++++++++++++++++++++
 arch/i386/kernel/setup.c |  153 -----------------------------------------------
 include/asm-i386/e820.h  |    2
 3 files changed, 155 insertions(+), 152 deletions(-)

This patch moves e820/efi memmap table walking function from
setup.c to e820.c, also this patch adds extern declaration in
header file.
Signed-off-by: Nbibo,mao <bibo.mao@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

 arch/i386/kernel/e820.c  |  115 +++++++++++++++++++++++++++++++++
 arch/i386/kernel/setup.c |  118 -----------------------------------
 include/asm-i386/e820.h  |    2
 arch/i386/kernel/e820.c  |  115 +++++++++++++++++++++++++++++++++++++++++++++
 arch/i386/kernel/setup.c |  118 -----------------------------------------------
 include/asm-i386/e820.h  |    2
 3 files changed, 117 insertions(+), 118 deletions(-)

Move more code from setup.c into e820.c
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

They cannot be actually freed because the FACS table has a
shared-with-the-BIOS lock.
Signed-off-by: NAndi Kleen <ak@suse.de>

Introduce a e820_all_mapped() function which checks if the entire range
<start,end> is mapped with type.

This is done by moving the local start variable to the end of each
known-good region; if at the end of the function the start address is
still before end, there must be a part that's not of the correct type;
otherwise it's a good region.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The specifications that talk about E820 map doesn't have an upper limit on
the number of e820 entries.  But, today's kernel has a hard limit of 32.
With increase in memory size, we are seeing the number of E820 entries
reaching close to 32.  Patch below bumps the number upto 128.

The patch changes the location of EDDBUF in zero-page (as it comes after E820).
As, EDDBUF is not used by boot loaders, this patch should not have any effect
on bootloader-setup code interface.

Patch covers both i386 and x86-64.

Tested on:
* grub booting bzImage
* lilo booting bzImage with EDID info enabled
* pxeboot of bzImage

Side-effect:
bss increases by ~ 2K and init.data increases by ~7.5K
on all systems, due to increase in size of static arrays.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!