In order to allow KVM to run on Cortex-A53 implementations, wire the
minimal support required.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

PSCIv0.2 adds a new function called AFFINITY_INFO, which
can be used to query if a specified CPU has actually gone
offline. Calling this function via cpu_kill ensures that
a CPU has quiesced after a call to cpu_die. This helps
prevent the CPU from doing arbitrary bad things when data
or instructions are clobbered (as happens with kexec)
in the window between a CPU announcing that it is dead
and said CPU leaving the kernel.
Signed-off-by: NAshwin Chaugule <ashwin.chaugule@linaro.org>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>

The PSCI v0.2+ spec defines standard values for PSCI function IDs.
Add a new binding entry so that pre v0.2 implementations can
use DT entries for function IDs and v0.2+ implementations use
standard entries as defined by the PSCIv0.2 specification.
Signed-off-by: NAshwin Chaugule <ashwin.chaugule@linaro.org>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NRob Herring <robh@kernel.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>

The PSCIv0.2 spec defines standard values of function IDs
and introduces a few new functions. Detect version of PSCI
and appropriately select the right PSCI functions.
Signed-off-by: NAshwin Chaugule <ashwin.chaugule@linaro.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>

We have PSCI v0.2 emulation available in KVM ARM/ARM64
hence advertise this to user space (i.e. QEMU or KVMTOOL)
via KVM_CHECK_EXTENSION ioctl.
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

This patch adds emulation of PSCI v0.2 CPU_SUSPEND function call for
KVM ARM/ARM64. This is a CPU-level function call which can suspend
current CPU or current CPU cluster. We don't have VCPU clusters in
KVM so we only suspend the current VCPU.

The CPU_SUSPEND emulation is not tested much because currently there
is no CPUIDLE driver in Linux kernel that uses PSCI CPU_SUSPEND. The
PSCI CPU_SUSPEND implementation in ARM64 kernel was tested using a
Simple CPUIDLE driver which is not published due to unstable DT-bindings
for PSCI.
(For more info, http://lwn.net/Articles/574950/)

For simplicity, we implement CPU_SUSPEND emulation similar to WFI
(Wait-for-interrupt) emulation and we also treat power-down request
to be same as stand-by request. This is consistent with section
5.4.1 and section 5.4.2 of PSCI v0.2 specification.
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

As-per PSCI v0.2, the source CPU provides physical address of
"entry point" and "context id" for starting a target CPU. Also,
if target CPU is already running then we should return ALREADY_ON.

Current emulation of CPU_ON function does not consider physical
address of "context id" and returns INVALID_PARAMETERS if target
CPU is already running.

This patch updates kvm_psci_vcpu_on() such that it works for both
PSCI v0.1 and PSCI v0.2.
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

This patch adds emulation of PSCI v0.2 MIGRATE, MIGRATE_INFO_TYPE, and
MIGRATE_INFO_UP_CPU function calls for KVM ARM/ARM64.

KVM ARM/ARM64 being a hypervisor (and not a Trusted OS), we cannot provide
this functions hence we emulate these functions in following way:
1. MIGRATE - Returns "Not Supported"
2. MIGRATE_INFO_TYPE - Return 2 i.e. Trusted OS is not present
3. MIGRATE_INFO_UP_CPU - Returns "Not Supported"
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

This patch adds emulation of PSCI v0.2 AFFINITY_INFO function call
for KVM ARM/ARM64. This is a VCPU-level function call which will be
used to determine current state of given affinity level.
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

The PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET functions are system-level
functions hence cannot be fully emulated by in-kernel PSCI emulation code.

To tackle this, we forward PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET function
calls from vcpu to user space (i.e. QEMU or KVMTOOL) via kvm_run structure
using KVM_EXIT_SYSTEM_EVENT exit reasons.
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Currently, we don't have an exit reason to notify user space about
a system-level event (for e.g. system reset or shutdown) triggered
by the VCPU. This patch adds exit reason KVM_EXIT_SYSTEM_EVENT for
this purpose. We can also inform user space about the 'type' and
architecture specific 'flags' of a system-level event using the
kvm_run structure.

This newly added KVM_EXIT_SYSTEM_EVENT will be used by KVM ARM/ARM64
in-kernel PSCI v0.2 support to reset/shutdown VMs.
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Currently, the kvm_psci_call() returns 'true' or 'false' based on whether
the PSCI function call was handled successfully or not. This does not help
us emulate system-level PSCI functions where the actual emulation work will
be done by user space (QEMU or KVMTOOL). Examples of such system-level PSCI
functions are: PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET.

This patch updates kvm_psci_call() to return three types of values:
1) > 0 (success)
2) = 0 (success but exit to user space)
3) < 0 (errors)
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

We have in-kernel emulation of PSCI v0.2 in KVM ARM/ARM64. To provide
PSCI v0.2 interface to VCPUs, we have to enable KVM_ARM_VCPU_PSCI_0_2
feature when doing KVM_ARM_VCPU_INIT ioctl.

The patch updates documentation of KVM_ARM_VCPU_INIT ioctl to provide
info regarding KVM_ARM_VCPU_PSCI_0_2 feature.
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Currently, the in-kernel PSCI emulation provides PSCI v0.1 interface to
VCPUs. This patch extends current in-kernel PSCI emulation to provide
PSCI v0.2 interface to VCPUs.

By default, ARM/ARM64 KVM will always provide PSCI v0.1 interface for
keeping the ABI backward-compatible.

To select PSCI v0.2 interface for VCPUs, the user space (i.e. QEMU or
KVMTOOL) will have to set KVM_ARM_VCPU_PSCI_0_2 feature when doing VCPU
init using KVM_ARM_VCPU_INIT ioctl.
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

We need a common place to share PSCI related defines among ARM kernel,
ARM64 kernel, KVM ARM/ARM64 PSCI emulation, and user space.

We introduce uapi/linux/psci.h for this purpose. This newly added
header will be first used by KVM ARM/ARM64 in-kernel PSCI emulation
and user space (i.e. QEMU or KVMTOOL).
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: NAshwin Chaugule <ashwin.chaugule@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

User space (i.e. QEMU or KVMTOOL) should be able to check whether KVM
ARM/ARM64 supports in-kernel PSCI v0.2 emulation. For this purpose, we
define KVM_CAP_ARM_PSCI_0_2 in KVM user space interface header.
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Now we can flush all the TLBs out of the mmu lock without TLB corruption when
write-proect the sptes, it is because:
- we have marked large sptes readonly instead of dropping them that means we
  just change the spte from writable to readonly so that we only need to care
  the case of changing spte from present to present (changing the spte from
  present to nonpresent will flush all the TLBs immediately), in other words,
  the only case we need to care is mmu_spte_update()

- in mmu_spte_update(), we haved checked
  SPTE_HOST_WRITEABLE | PTE_MMU_WRITEABLE instead of PT_WRITABLE_MASK, that
  means it does not depend on PT_WRITABLE_MASK anymore
Acked-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Relax the tlb flush condition since we will write-protect the spte out of mmu
lock. Note lockless write-protection only marks the writable spte to readonly
and the spte can be writable only if both SPTE_HOST_WRITEABLE and
SPTE_MMU_WRITEABLE are set (that are tested by spte_is_locklessly_modifiable)

This patch is used to avoid this kind of race:

      VCPU 0                         VCPU 1
lockless wirte protection:
      set spte.w = 0
                                 lock mmu-lock

                                 write protection the spte to sync shadow page,
                                 see spte.w = 0, then without flush tlb

				 unlock mmu-lock

                                 !!! At this point, the shadow page can still be
                                     writable due to the corrupt tlb entry
     Flush all TLB
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Currently, kvm zaps the large spte if write-protected is needed, the later
read can fault on that spte. Actually, we can make the large spte readonly
instead of making them un-present, the page fault caused by read access can
be avoided

The idea is from Avi:
| As I mentioned before, write-protecting a large spte is a good idea,
| since it moves some work from protect-time to fault-time, so it reduces
| jitter.  This removes the need for the return value.

This version has fixed the issue reported in 6b73a960, the reason of that
issue is that fast_page_fault() directly sets the readonly large spte to
writable but only dirty the first page into the dirty-bitmap that means
other pages are missed. Fixed it by only the normal sptes (on the
PT_PAGE_TABLE_LEVEL level) can be fast fixed
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Using sp->role.level instead of @level since @level is not got from the
page table hierarchy

There is no issue in current code since the fast page fault currently only
fixes the fault caused by dirty-log that is always on the last level
(level = 1)

This patch makes the code more readable and avoids potential issue in the
further development
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This reverts commit 5befdc38.

Since we will allow flush tlb out of mmu-lock in the later
patch
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

If EFER.LMA is off, cs.l does not determine execution mode.
Currently, the emulation engine assumes differently.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The IN instruction is not be affected by REP-prefix as INS is.  Therefore, the
emulation should ignore the REP prefix as well.  The current emulator
implementation tries to perform writeback when IN instruction with REP-prefix
is emulated. This causes it to perform wrong memory write or spurious #GP
exception to be injected to the guest.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

According to Intel specifications, PAE and non-PAE does not have any reserved
bits.  In long-mode, regardless to PCIDE, only the high bits (above the
physical address) are reserved.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

If a guest enables a performance counter but does not enable PMI, the
hypervisor currently does not reprogram the performance counter once it
overflows.  As a result the host performance counter is kept with the original
sampling period which was configured according to the value of the guest's
counter when the counter was enabled.

Such behaviour can cause very bad consequences. The most distrubing one can
cause the guest not to make any progress at all, and keep exiting due to host
PMI before any guest instructions is exeucted. This situation occurs when the
performance counter holds a very high value when the guest enables the
performance counter. As a result the host's sampling period is configured to be
very short. The host then never reconfigures the sampling period and get stuck
at entry->PMI->exit loop. We encountered such a scenario in our experiments.

The solution is to reprogram the counter even if the guest does not use PMI.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Some Type 1 hypervisors such as XEN won't enable VMX without it present
Signed-off-by: NBandan Das <bsd@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This feature emulates the "Acknowledge interrupt on exit" behavior.
We can safely emulate it for L1 to run L2 even if L0 itself has it
disabled (to run L1).
Signed-off-by: NBandan Das <bsd@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

For single context invalidation, we fall through to global
invalidation in handle_invept() except for one case - when
the operand supplied by L1 is different from what we have in
vmcs12. However, typically hypervisors will only call invept
for the currently loaded eptp, so the condition will
never be true.
Signed-off-by: NBandan Das <bsd@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

When entering an exception after an ICEBP, the saved instruction
pointer should point to after the instruction.

This fixes the bug here: https://bugs.launchpad.net/qemu/+bug/1119686Signed-off-by: NHuw Davies <huw@codeweavers.com>
Reviewed-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Merge tag 'kvm-s390-20140422' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into queue

Lazy storage key handling
-------------------------
Linux does not use the ACC and F bits of the storage key. Newer Linux
versions also do not use the storage keys for dirty and reference
tracking. We can optimize the guest handling for those guests for faults
as well as page-in and page-out by simply not caring about the guest
visible storage key. We trap guest storage key instruction to enable
those keys only on demand.

Migration bitmap

Until now s390 never provided a proper dirty bitmap.  Let's provide a
proper migration bitmap for s390. We also change the user dirty tracking
to a fault based mechanism. This makes the host completely independent
from the storage keys. Long term this will allow us to back guest memory
with large pages.

per-VM device attributes
------------------------
To avoid the introduction of new ioctls, let's provide the
attribute semanantic also on the VM-"device".

Userspace controlled CMMA
-------------------------
The CMMA assist is changed from "always on" to "on if requested" via
per-VM device attributes. In addition a callback to reset all usage
states is provided.

Proper guest DAT handling for intercepts
----------------------------------------
While instructions handled by SIE take care of all addressing aspects,
KVM/s390 currently does not care about guest address translation of
intercepts. This worked out fine, because
- the s390 Linux kernel has a 1:1 mapping between kernel virtual<->real
 for all pages up to memory size
- intercepts happen only for a small amount of cases
- all of these intercepts happen to be in the kernel text for current
  distros

Of course we need to be better for other intercepts, kernel modules etc.
We provide the infrastructure and rework all in-kernel intercepts to work
on logical addresses (paging etc) instead of real ones. The code has
been running internally for several months now, so it is time for going
public.

GDB support
-----------
We provide breakpoints, single stepping and watchpoints.

Fixes/Cleanups
--------------
- Improve program check delivery
- Factor out the handling of transactional memory  on program checks
- Use the existing define __LC_PGM_TDB
- Several cleanups in the lowcore structure
- Documentation

NOTES
-----
- All patches touching base s390 are either ACKed or written by the s390
  maintainers
- One base KVM patch "KVM: add kvm_is_error_gpa() helper"
- One patch introduces the notion of VM device attributes
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Conflicts:
	include/uapi/linux/kvm.h

Factor out the new function handle_itdb(), which copies the ITDB into
guest lowcore to fully handle a TX abort.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The generically assembled low core labels already contain the
address for the TDB.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

On hard exits (abort, sigkill) we have have some kvm_s390_interrupt_info
structures hanging around. Delete those on exit to avoid memory leaks.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
CC: stable@vger.kernel.org
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>

When a guest is single-stepped, we want to disable timer interrupts. Otherwise,
the guest will continuously execute the external interrupt handler and make
debugging of code where timer interrupts are enabled almost impossible.

The delivery of timer interrupts can be enforced in such sections by setting a
breakpoint and continuing execution.

In order to disable timer interrupts, they are disabled in the control register
of the guest just before SIE entry and are suppressed in the interrupt
check/delivery methods.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch moves the checks for enabled timer (clock-comparator) interrupts and pending
timer interrupts into own functions, making the code better readable and easier to
maintain.

The method kvm_cpu_has_pending_timer is filled with life.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Added documentation for diag 501, stating that no subfunctions are provided and
no parameters are used.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch adds support to debug the guest using the PER facility on s390.
Single-stepping, hardware breakpoints and hardware watchpoints are supported. In
order to use the PER facility of the guest without it noticing it, the control
registers of the guest have to be patched and access to them has to be
intercepted(stctl, stctg, lctl, lctlg).

All PER program interrupts have to be intercepted and only the relevant PER
interrupts for the guest have to be given back. Special care has to be taken
about repeated exits on the same hardware breakpoint. The intervention of the
host in the guests PER configuration is not fully transparent. PER instruction
nullification can not be used by the guest and too many storage alteration
events may be reported to the guest (if it is activated for special address
ranges only) when the host concurrently debugging it.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch adds the structs to the kernel headers needed to pass information
from/to userspace in order to debug a guest on s390 with hardware support.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Introduce the methods to emulate the stctl and stctg instruction. Added tracing
code.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

When a program interrupt was to be delivered until now, no program interrupt
parameters were stored in the low-core of the target vcpu.

This patch enables the delivery of those program interrupt parameters, takes
care of concurrent PER events which can be injected in addition to any program
interrupt and uses the correct instruction length code (depending on the
interception code) for the injection of program interrupts.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>