[commit 8185554d: fix incorrect inode acl reset] introduced a dead
code by adding a condition which can never be true to an else
branch.  The condition can never be true because it is already
checked by a previous if statement which causes function to return.
Signed-off-by: NMichal Nazarewicz <mina86@mina86.com>
Reviewed-By: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

We were accounting for sizeof(struct btrfs_item) twice, once
in the data_size variable and another time in the if statement
below.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

Currently we do 2 traversals of an inode's extent_io_tree
before inserting an extent state structure: 1 to see if a
matching extent state already exists and 1 to do the insertion
if the fist traversal didn't found such extent state.

This change just combines those tree traversals into a single one.
While running sysbench tests (random writes) I captured the number
of elements in extent_io_tree trees for a while (into a procfs file
backed by a seq_list from seq_file module) and got this histogram:

Count: 9310
Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688
Percentiles:  90th: 20985.000; 95th: 21155.000; 99th: 21369.000
  51.000 -   93.933:   693 ########
  93.933 -  172.314:   938 ##########
 172.314 -  315.408:   856 #########
 315.408 -  576.646:    95 #
 576.646 - 6415.830:   888 ##########
6415.830 - 11713.809:  1024 ###########
11713.809 - 21386.000:  4816 #####################################################

So traversing such trees can take some significant time that can
easily be avoided.

Ran the following sysbench tests, 5 times each, for sequential and
random writes, and got the following results:

  sysbench --test=fileio --file-num=1 --file-total-size=2G \
    --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \
    --max-requests=0 --max-time=60 --file-io-mode=sync

  sysbench --test=fileio --file-num=1 --file-total-size=2G \
    --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \
    --max-requests=0 --max-time=60 --file-io-mode=sync

Before this change:

sequential writes: 69.28Mb/sec (average of 5 runs)
random writes:     4.14Mb/sec  (average of 5 runs)

After this change:

sequential writes: 69.91Mb/sec (average of 5 runs)
random writes:     5.69Mb/sec  (average of 5 runs)
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

When we didn't find a matching extent state, we inserted a new one
but didn't cache it in the **cached_state parameter, which makes a
subsequent call do a tree lookup to get it.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

Before this change, adding an extent map to the extent map tree of an
inode required 2 tree nevigations:

1) doing a tree navigation to search for an existing extent map starting
   at the same offset or an extent map that overlaps the extent map we
   want to insert;

2) Another tree navigation to add the extent map to the tree (if the
   former tree search didn't found anything).

This change just merges these 2 steps into a single one.
While running first few btrfs xfstests I had noticed these trees easily
had a few hundred elements, and then with the following sysbench test it
reached over 1100 elements very often.

Test:

  sysbench --test=fileio --file-num=32 --file-total-size=10G \
    --file-test-mode=seqwr --num-threads=512 --file-block-size=8192 \
    --max-requests=1000000 --file-io-mode=sync [prepare|run]

(fs created with mkfs.btrfs -l 4096 -f /dev/sdb3 before each sysbench
prepare phase)

Before this patch:

run 1 - 41.894Mb/sec
run 2 - 40.527Mb/sec
run 3 - 40.922Mb/sec
run 4 - 49.433Mb/sec
run 5 - 40.959Mb/sec

average - 42.75Mb/sec

After this patch:

run 1 - 48.036Mb/sec
run 2 - 50.21Mb/sec
run 3 - 50.929Mb/sec
run 4 - 46.881Mb/sec
run 5 - 53.192Mb/sec

average - 49.85Mb/sec
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

When attempting to move items from our target leaf to its neighbor
leaves (right and left), we only need to free data_size - free_space
bytes from our leaf in order to add the new item (which has size of
data_size bytes). Therefore attempt to move items to the right and
left leaves if they have at least data_size - free_space bytes free,
instead of data_size bytes free.

After 5 runs of the following test, I got a smaller number of btree
node splits overall:

sysbench --test=fileio --file-num=512 --file-total-size=5G \
  --file-test-mode=seqwr --num-threads=512 \
   --file-block-size=8192 --max-requests=100000 --file-io-mode=sync

Before this change:
* 6171 splits (average of 5 test runs)
* 61.508Mb/sec of throughput (average of 5 test runs)

After this change:
* 6036 splits (average of 5 test runs)
* 63.533Mb/sec of throughput (average of 5 test runs)

An ideal test would not just have multiple threads/processes writing
to a file (insertion of file extent items) but also do other operations
that result in insertion of items with varied sizes, like file/directory
creations, creation of links, symlinks, xattrs, etc.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

After an ordered extent completes, don't blindly reset the
inode's ordered tree last accessed ordered extent pointer.

While running the xfstests I noticed that about 29% of the
time the ordered extent to which tree->last pointed was not
the same as our just completed ordered extent. After that I
ran the following sysbench test (after a prepare phase) and
noticed that about 68% of the time tree->last pointed to
a different ordered extent too.

sysbench --test=fileio --file-num=32 --file-total-size=4G \
    --file-test-mode=rndwr --num-threads=512 \
    --file-block-size=32768 --max-time=60 --max-requests=0 run

Therefore reset tree->last on ordered extent removal only if
it pointed to the ordered extent we're removing from the tree.

Results from 4 runs of the following test before and after
applying this patch:

$ sysbench --test=fileio --file-num=32 --file-total-size=4G \
  --file-test-mode=seqwr --num-threads=512 \
  --file-block-size=32768 --max-time=60 --file-io-mode=sync prepare
$ sysbench --test=fileio --file-num=32 --file-total-size=4G \
  --file-test-mode=seqwr --num-threads=512 \
  --file-block-size=32768 --max-time=60 --file-io-mode=sync run

Before this path:

run 1 - 64.049Mb/sec
run 2 - 63.455Mb/sec
run 3 - 64.656Mb/sec
run 4 - 63.833Mb/sec

After this patch:

run 1 - 66.149Mb/sec
run 2 - 68.459Mb/sec
run 3 - 66.338Mb/sec
run 4 - 66.176Mb/sec

With random writes (--file-test-mode=rndwr) I had huge fluctuations
on the results (+- 35% easily).
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

Filipe noticed that we were leaking the features attribute group
after umount. His fix of just calling sysfs_remove_group() wasn't enough
since that removes just the supported features and not the unsupported
features.

This patch changes the unknown feature handling to add them individually
so we can skip the kmalloc and uses the same iteration to tear them down
later.

We also fix the error handling during mount so that we catch the
failing creation of the per-super kobject, and handle proper teardown
of a half-setup sysfs context.

Tested properly with kmemleak enabled this time.
Reported-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Tested-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

This patch fixes the following warnings:
fs/btrfs/extent-tree.c:6201:12: sparse: symbol 'get_raid_name' was not declared. Should it be static?
fs/btrfs/extent-tree.c:8430:9: error: format not a string literal and no format arguments [-Werror=format-security] get_raid_name(index));
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

The inode eviction can be very slow, because during eviction we
tell the VFS to truncate all of the inode's pages. This results
in calls to btrfs_invalidatepage() which in turn does calls to
lock_extent_bits() and clear_extent_bit(). These calls result in
too many merges and splits of extent_state structures, which
consume a lot of time and cpu when the inode has many pages. In
some scenarios I have experienced umount times higher than 15
minutes, even when there's no pending IO (after a btrfs fs sync).

A quick way to reproduce this issue:

$ mkfs.btrfs -f /dev/sdb3
$ mount /dev/sdb3 /mnt/btrfs
$ cd /mnt/btrfs
$ sysbench --test=fileio --file-num=128 --file-total-size=16G \
    --file-test-mode=seqwr --num-threads=128 \
    --file-block-size=16384 --max-time=60 --max-requests=0 run
$ time btrfs fi sync .
FSSync '.'

real	0m25.457s
user	0m0.000s
sys	0m0.092s
$ cd ..
$ time umount /mnt/btrfs

real	1m38.234s
user	0m0.000s
sys	1m25.760s

The same test on ext4 runs much faster:

$ mkfs.ext4 /dev/sdb3
$ mount /dev/sdb3 /mnt/ext4
$ cd /mnt/ext4
$ sysbench --test=fileio --file-num=128 --file-total-size=16G \
    --file-test-mode=seqwr --num-threads=128 \
    --file-block-size=16384 --max-time=60 --max-requests=0 run
$ sync
$ cd ..
$ time umount /mnt/ext4

real	0m3.626s
user	0m0.004s
sys	0m3.012s

After this patch, the unmount (inode evictions) is much faster:

$ mkfs.btrfs -f /dev/sdb3
$ mount /dev/sdb3 /mnt/btrfs
$ cd /mnt/btrfs
$ sysbench --test=fileio --file-num=128 --file-total-size=16G \
    --file-test-mode=seqwr --num-threads=128 \
    --file-block-size=16384 --max-time=60 --max-requests=0 run
$ time btrfs fi sync .
FSSync '.'

real	0m26.774s
user	0m0.000s
sys	0m0.084s
$ cd ..
$ time umount /mnt/btrfs

real	0m1.811s
user	0m0.000s
sys	0m1.564s
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

We hit a forever loop when doing balance relocation,the reason
is that we firstly reserve 4M(node size is 16k).and within transaction
we will try to add extra reservation for snapshot roots,this will
return -EAGAIN if there has been a thread flushing space to reserve
space.We will do this again and again with filesystem becoming nearly
full.

If the above '-EAGAIN' case happens, we try to refill reservation more
outsize of transaction, and this will return eariler in enospc case,however,
this dosen't really hurt because it makes no sense doing balance relocation
with the filesystem nearly full.

Miao Xie helped a lot to track this issue, thanks.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

If the ordered extent's last byte was 1 less than our region's
start byte, we would unnecessarily wait for the completion of
that ordered extent, because it doesn't intersect our target
range.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

When we ran sysbench on the fs with compression, the following WARN_ONs were
triggered:
 fs/btrfs/inode.c:7829	WARN_ON(BTRFS_I(inode)->outstanding_extents);
 fs/btrfs/inode.c:7830	WARN_ON(BTRFS_I(inode)->reserved_extents);
 fs/btrfs/inode.c:7832	WARN_ON(BTRFS_I(inode)->csum_bytes);

Steps to reproduce:
 # mkfs.btrfs -f <dev>
 # mount -o compress <dev> <mnt>
 # cd <mnt>
 # sysbench --test=fileio --num-threads=8 --file-total-size=8G \
 > --file-block-size=32K --file-io-mode=rndwr --file-fsync-freq=0 \
 > --file-fsync-end=no --max-requests=300000 --file-extra-flags=direct \
 > --file-test-mode=sync prepare
 # cd -
 # umount <mnt>
 # mount -o compress <dev> <mnt>
 # cd <mnt>
 # sysbench --test=fileio --num-threads=8 --file-total-size=8G \
 > --file-block-size=32K --file-io-mode=rndwr --file-fsync-freq=0 \
 > --file-fsync-end=no --max-requests=300000 --file-extra-flags=direct \
 > --file-test-mode=sync run
 # cd -
 # umount <mnt>

The reason of this problem is:
Task0				Task1
btrfs_direct_IO
  unlock(&inode->i_mutex)
				lock(&inode->i_mutex)
				reserve_space()
				prepare_pages()
				  lock_extent()
				  clear_extent()
				  unlock_extent()
  lock_extent()
  test_extent(uptodate)
    return false
				copy_data()
				set_delalloc_extent()
  extent need compress
    go back to buffered write
  clear_extent(DELALLOC | DIRTY)
  unlock_extent()

Task 0 and 1 wrote the same place, and task0 cleared the delalloc flag which
was set by task1, it made the dirty pages in that extents couldn't be flushed
into the disk, so the reserved space for that extent was not released at
the end.

This patch fixes the above bug by unlocking the extent after the delalloc.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

- the caller has gotten the inode object, needn't pass the file object.
  And if so, we needn't define a inode pointer variant.
- the position should be aligned by the page size not sector size, so
  we also needn't pass the root object into prepare_pages().
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

We don't need to crash hard here, it's just reading a sysfs file. The
values considered in switch are from a fixed set, the default case
should not happen at all.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

Added in patch "btrfs: add ability to change features via sysfs",
modifications to superblock don't need to reserve metadata blocks when
starting a transaction.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

The kernel macro pr_debug is defined as a empty statement when DEBUG is
not defined. Make btrfs_debug match pr_debug to avoid spamming
the kernel log with debug messages
Signed-off-by: NFrank Holton <fholton@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

Found by uselex.rb:
> btrfs_get_inode_ref_index: [R]: exported from:
fs/btrfs/inode-item.o fs/btrfs/btrfs.o fs/btrfs/built-in.o
Signed-off-by: NSergei Trofimovich <slyfox@gentoo.org>
Reviewed-by: NDavid Stebra <dsterba@suse.cz>
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

Flag BTRFS_ORDERED_TRUNCATED is a new one, update the tracepoint to
support it.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

We use set_bit() to assign ordered extent's flags, but in the related
tracepoint we don't do the same thing, which makes the trace output
not to parse flags correctly.

Also, since the flags are bits stuff, we change to use __print_flags with
a 'delim' instead of __print_symbolic.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

This is the third step in bootstrapping the btrfs_find_item interface.
The function find_orphan_item(), in orphan.c, is similar to the two
functions already replaced by the new interface. It uses two parameters,
which are already present in the interface, and is nearly identical to
the function brought in in the previous patch.

Replace the two calls to find_orphan_item() with calls to
btrfs_find_item(), with the defined objectid and type that was used
internally by find_orphan_item(), a null path, and a null key. Add a
test for a null path to btrfs_find_item, and if it passes, allocate and
free the path. Finally, remove find_orphan_item().
Signed-off-by: NKelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

This patch is the second step in bootstrapping the btrfs_find_item
interface. The btrfs_find_root_ref() is similar to the former
__inode_info(); it accepts four of its parameters, and duplicates the
first half of its functionality.

Replace the one former call to btrfs_find_root_ref() with a call to
btrfs_find_item(), along with the defined key type that was used
internally by btrfs_find_root ref, and a null found key. In
btrfs_find_item(), add a test for the null key at the place where
the functionality of btrfs_find_root_ref() ends; btrfs_find_item()
then returns if the test passes. Finally, remove btrfs_find_root_ref().
Signed-off-by: NKelley Nielsen <kelleynnn@gmail.com>
Suggested-by: NZach Brown <zab@redhat.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

There are many btrfs functions that manually search the tree for an
item. They all reimplement the same mechanism and differ in the
conditions that they use to find the item. __inode_info() is one such
example. Zach Brown proposed creating a new interface to take the place
of these functions.

This patch is the first step to creating the interface. A new function,
btrfs_find_item, has been added to ctree.c and prototyped in ctree.h.
It is identical to __inode_info, except that the order of the parameters
has been rearranged to more closely those of similar functions elsewhere
in the code (now, root and path come first, then the objectid, offset
and type, and the key to be filled in last). __inode_info's callers have
been set to call this new function instead, and __inode_info itself has
been removed.
Signed-off-by: NKelley Nielsen <kelleynnn@gmail.com>
Suggested-by: NZach Brown <zab@redhat.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

Use otherwise unused local variables slot in update_qgroup_limit_item and
in update_qgroup_info_item, and remove unused variable ins from
btrfs_qgroup_account_ref.
Signed-off-by: NValentina Giusti <valentina.giusti@microon.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

Signed-off-by: NValentina Giusti <valentina.giusti@microon.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

Signed-off-by: NValentina Giusti <valentina.giusti@microon.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

The variable window_start in setup_cluster_no_bitmap is not used since commit
1bb91902
(Btrfs: revamp clustered allocation logic)
Signed-off-by: NValentina Giusti <valentina.giusti@microon.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

Remove unused variables:
* tree from end_bio_extent_writepage,
* item from extent_fiemap.
Signed-off-by: NValentina Giusti <valentina.giusti@microon.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

The variable found_uncached_bg in find_free_extent is not used since commit
285ff5af
(Btrfs: remove the ideal caching code)
Signed-off-by: NValentina Giusti <valentina.giusti@microon.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

Remove unused variables:
* tree from csum_dirty_buffer,
* tree from btree_readpage_end_io_hook,
* tree from btree_writepages,
* bytenr from btrfs_create_tree,
* fs_info from end_workqueue_fn.
Signed-off-by: NValentina Giusti <valentina.giusti@microon.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

Variable owner in btrfs_new_inode is unused since commit
d82a6f1d
(Btrfs: kill BTRFS_I(inode)->block_group)
Signed-off-by: NValentina Giusti <valentina.giusti@microon.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

This adds a writeable attribute which describes the label.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

Now that we have the infrastructure for per-super attributes, we can
publish device membership in /sys/fs/btrfs/<fsid>/devices. The information
is published as symlinks to the block devices.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

While trying to debug ENOSPC issues, it's helpful to understand what the
kernel's view of the available space is. We export this information
via ioctl, but sysfs files are more easily used.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

btrfs filesystem df output will show the size of the metadata space
and how much of it is used, and the user assumes that the difference
is all usable space. Since that's not actually the case due to the
global metadata reservation, we should provide the full picture to the
user.

This patch adds an ioctl that exports the size of the global metadata
reservation so that btrfs filesystem df can report it.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

Now that we have the feature name strings available in the kernel via
the sysfs attributes, we can use them for printing better failure
messages from the ioctl path.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

This patch adds the ability to change (set/clear) features while the file
system is mounted. A bitmask is added for each feature set for the
support to set and clear the bits. A message indicating which bit
has been set or cleared is issued when it's been changed and also when
permission or support for a particular bit has been denied.

Since the the attributes can now be writable, we need to introduce
another struct attribute to hold the different permissions.

If neither set or clear is supported, the file will have 0444 permissions.
If either set or clear is supported, the file will have 0644 permissions
and the store handler will filter out the write based on the bitmask.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

With the compat and compat-ro bits, it's possible for file systems to
exist that have features that aren't supported by the kernel's file system
implementation yet still be mountable.

This patch publishes read-only info on those features using a prefix:number
format, where the number is the bit number rather than the shifted value.
e.g. "compat:12"
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

This patch publishes information on which features are enabled in the
file system on a per-super basis. At this point, it only publishes
information on features supported by the file system implementation.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>