When we need to reset the global seqno on wraparound, we have to wait
until the current rbtrees are drained (or otherwise the next waiter will
be out of sequence). The current mechanism to kick and spin until
complete, may exit too early as it would break if the target thread was
currently running. Instead, we must wake up the threads, but keep
spinning until the trees have been deleted.

In order to appease Tvrtko, busy spin rather than yield().
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108143719.32215-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

This gets rid of a warning that the connectors are used without locking
when doing a nonblocking modeset.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-11-git-send-email-maarten.lankhorst@linux.intel.com

All of this state should be updated as soon as possible. It shouldn't be
done later because then future updates may not depend on it.

Changes since v1:
- Move the modeset update to before drm_atomic_state_get. (Ville)
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-10-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

The only user was i915, which is now gone.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@redhat.com> #irc
Cc: dri-devel@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-9-git-send-email-maarten.lankhorst@linux.intel.com

drm_select_eld requires mode_config.mutex and connection_mutex
because it looks at the connector list and at the legacy encoders.

This is not required, because when we call audio_codec_enable we know
which connector it was called for, so pass the state.

This also removes having to look at crtc->config.

Changes since v1:
- Use intel_crtc->pipe instead of drm_crtc_index. (Ville)
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-8-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

This is the last connector still looking at crtc->config. Fix this.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-7-git-send-email-maarten.lankhorst@linux.intel.com

The newly added assert_kernel_context_is_current introduces a warning
when built with W=1:

drivers/gpu/drm/i915/i915_gem.c: In function ‘assert_kernel_context_is_current’:
drivers/gpu/drm/i915/i915_gem.c:4417:63: error: suggest braces around empty body in an ‘else’ statement [-Werror=empty-body]

Changing the GEM_BUG_ON() macro from an empty definition to "do { } while (0)"
makes the macro more robust to use and avoids the warning.

Fixes: 3033acab ("drm/i915: Queue the idling context switch after all other timelines")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108135834.2166677-1-arnd@arndb.de

The code to determine the primary plane offset for gen2/3 looks
different than the code for gen4+, but in fact it's doing the same
thing. Let's make it uniform. Allows us to eliminate the 'obj' from
the list of local variables as well.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-6-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

intel_cursor_plane_create() and intel_sprite_plane_create() return
an error pointer, so let's not mistakenly look for a NULL pointer.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: NChris Wilson <chris@chris-wilson.co.uk>
References: https://lists.freedesktop.org/archives/intel-gfx/2016-November/110690.html
Fixes: b079bd17 ("drm/i915: Bail if plane/crtc init fails")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-5-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Use the passed in plane_state instead of plane->state in
vlv_update_plane(). Currently the two are one and the same, but if we
start queuing up multiple plane updates they might not be.

Looks like this was rebase fail on my part.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 8d0deca8 ("drm/i915: Pass 90/270 vs. 0/180 rotation info for intel_gen4_compute_page_offset()")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-4-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

We always flush the chipset prior to executing with the GPU, so we can
skip the flush during ordinary domain management.

This should help mitigate some of the potential performance regressions,
but likely trivial, from doing the flush unconditionally before execbuf
introduced in commit dcd79934 ("drm/i915: Unconditionally flush any
chipset buffers before execbuf")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161106130001.9509-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Get rid of sloppy inline functions now that we don't have more users:

i915_gem_request_get_seqno
i915_gem_request_get_engine

v2:
- request->engine is always non-NULL (Chris)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478589108-3702-1-git-send-email-joonas.lahtinen@linux.intel.com

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On LLC, or even snooped, machines rendering via the GPU ends up in the CPU
cache. This cacheline dirt also needs to be flushed to main memory when
moving to an incoherent domain, such as the display's scanout engine.
Mostly, this happens because either the object is marked as dirty from
its first use or is avoided by setting the object into the display
domain from the start.

v2: Treat WT as not requiring a clflush prior to use on the display
engine as well.

Fixes: 0f71979a ("drm/i915: Performed deferred clflush inside set-cache-level")
References: https://bugs.freedesktop.org/show_bug.cgi?id=95414Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107165204.7008-1-chris@chris-wilson.co.uk

During resume we will reset the SW/HW tracking for each ring head/tail
pointers and so are not prepared to replay any pending requests (as
opposed to GPU reset time). Add an assert for this both to the suspend
and the resume code.

v2:
- Check for ELSP port idle already during suspend and check !gt.awake
  during resume. (Chris)
v3:
- Move the !gt.awake check to i915_gem_resume().
v4:
- s/intel_lr_engines_idle/intel_execlists_idle/ (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-4-git-send-email-imre.deak@intel.com

We assume that the GPU is idle once receiving the seqno via the last
request's user interrupt. In execlist mode the corresponding context
completed interrupt can be delayed though and until this latter
interrupt arrives we consider the request to be pending on the ELSP
submit port. This can cause a problem during system suspend where this
last request will be seen by the resume code as still pending. Such
pending requests are normally replayed after a GPU reset, but during
resume we reset both SW and HW tracking of the ring head/tail pointers,
so replaying the pending request with its stale tail pointer will leave
the ring in an inconsistent state. A subsequent request submission can
lead then to the GPU executing from uninitialized area in the ring
behind the above stale tail pointer.

Fix this by making sure any pending request on the ELSP port is
completed before suspending. I used a polling wait since the completion
time I measured was <1ms and since normally we only need to wait during
system suspend. GPU idling during runtime suspend is scheduled with a
delay (currently 50-100ms) after the retirement of the last request at
which point the context completed interrupt must have arrived already.

The chance of this bug was increased by

commit 1c777c5d
Author: Imre Deak <imre.deak@intel.com>
Date:   Wed Oct 12 17:46:37 2016 +0300

    drm/i915/hsw: Fix GPU hang during resume from S3-devices state

but it could happen even without the explicit GPU reset, since we
disable interrupts afterwards during the suspend sequence.

v2:
- Do an unlocked poll-wait first. (Chris)
v3-4:
- s/intel_lr_engines_idle/intel_execlists_idle/ and move
  i915.enable_execlists check to the new helper. (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98470Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-3-git-send-email-imre.deak@intel.com

There is a small race where a new request can be submitted and retired
after the idle worker started to run which leads to idling the GPU too
early. Fix this by deferring the idling to the pending instance of the
worker.

This scenario was pointed out by Chris.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-2-git-send-email-imre.deak@intel.com

Atm, in case an idle work handler is already pending but haven't yet
started to run, retiring a new request will not extend the active period
as required, rather simply leaves the pending idle work to be scheduled
at the original expiration time. This may lead to idling the GPU too
early. Fix this by using the delayed-work scheduler alternative which
makes sure the handler's expiration time is extended in this case.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Requested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-1-git-send-email-imre.deak@intel.com

Valleyview appears to be limited to only scanning out from the first 512MiB
of the Global GTT. Lets presume that this behaviour was inherited from the
display block copied from g4x (not Ironlake) and all earlier generations
are similarly affected, though testing suggests different symptoms. For
simplicity, impose that these platforms must scanout from the mappable
region. (For extra simplicity, use HAS_GMCH_DISPLAY even though this
catches Cherryview which does not appear to be limited to the low
aperture for its scanout.)

v2: Use HAS_GMCH_DISPLAY() to more clearly convey my intent about
limiting this workaround to the old style of display engine.

v3: Update changelog to reflect testing by Ville Syrjälä
v4: Include the changes to the comments as well
Reported-by: NLuis Botello <luis.botello.ortega@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98036
Fixes: 2efb813d ("drm/i915: Fallback to using unmappable memory for scanout")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20161107110128.28762-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com

When we split a large object up into chunks for GTT faulting (because we
can't fit the whole object into the aperture) we have to align our cuts
with the fence registers. Each partial VMA must cover a complete set of
tile rows or the offset into each partial VMA is not aligned with the
whole image. Currently we enforce a minimum size on each partial VMA,
but this minimum size itself was not aligned to the tile row causing
distortion.
Reported-by: NAndreas Reis <andreas.reis@gmail.com>
Reported-by: NChris Clayton <chris2553@googlemail.com>
Reported-by: NNorbert Preining <preining@logic.at>
Tested-by: NNorbert Preining <preining@logic.at>
Tested-by: NChris Clayton <chris2553@googlemail.com>
Fixes: 03af84fe ("drm/i915: Choose partial chunksize based on tile row size")
Fixes: a61007a8 ("drm/i915: Fix partial GGTT faulting") # enabling patch
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98402
Testcase: igt/gem_mmap_gtt/medium-copy-odd
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20161107105443.27855-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Currently, the vma is being unlink from the object lookup on destroy.
However, we are meant to be decoupling it upon close so that the user
cannot access the closed vma whilst it remains active on the GPU.

[   34.074858] kernel BUG at drivers/gpu/drm/i915/i915_gem_gtt.c:3561!
[   34.074875] invalid opcode: 0000 [#1] PREEMPT SMP
[   34.074888] Modules linked in: snd_hda_intel i915 x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel lpc_ich mei_me mei snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_codec snd_hwdep snd_hda_core i2c_designware_platform i2c_designware_core snd_pcm e1000e ptp pps_core sdhci_acpi sdhci mmc_core i2c_hid [last unloaded: i915]
[   34.075010] CPU: 1 PID: 6224 Comm: gem_close_race Tainted: G     U          4.9.0-rc3-CI-CI_DRM_1800+ #1
[   34.075034] Hardware name:                  /NUC5i7RYB, BIOS RYBDWi35.86A.0355.2016.0224.1501 02/24/2016
[   34.075057] task: ffff8802459a8040 task.stack: ffffc90000524000
[   34.075074] RIP: 0010:[<ffffffffa0392cbc>]  [<ffffffffa0392cbc>] i915_gem_obj_lookup_or_create_vma+0x8c/0xc0 [i915]
[   34.075118] RSP: 0018:ffffc90000527b68  EFLAGS: 00010202
[   34.075135] RAX: ffff8802426c5e40 RBX: 0000000000000000 RCX: ffff8802447fc2a8
[   34.075158] RDX: 0000000000000000 RSI: ffff8802447fc2a8 RDI: ffff880248a4a880
[   34.075181] RBP: ffffc90000527b88 R08: 0000000000000008 R09: 0000000000000000
[   34.075203] R10: 0000000000000001 R11: 0000000000000000 R12: ffff880248a4a880
[   34.075225] R13: ffff8802447fc2a8 R14: ffff880243e9afa8 R15: ffff880248a4a9c8
[   34.075248] FS:  00007f9b43e59740(0000) GS:ffff880256c80000(0000) knlGS:0000000000000000
[   34.075273] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   34.075292] CR2: 00007f9b43419140 CR3: 000000024455d000 CR4: 00000000003406e0
[   34.075314] Stack:
[   34.075323]  0000000000000000 ffffc90000527bd0 ffff880243cb8008 ffff880243e9afa8
[   34.075353]  ffffc90000527c08 ffffffffa03874c7 ffffc90000527bb8 ffff880243e9afa8
[   34.075383]  ffff880243e9afb0 ffffc90000527e10 ffff8802447fc2a8 ffff880243cb8040
[   34.075414] Call Trace:
[   34.075435]  [<ffffffffa03874c7>] eb_lookup_vmas.isra.7+0x247/0x330 [i915]
[   34.075468]  [<ffffffffa0388c34>] i915_gem_do_execbuffer.isra.15+0x604/0x1a10 [i915]
[   34.075507]  [<ffffffffa039c957>] ? i915_gem_object_get_sg+0x347/0x380 [i915]
[   34.075532]  [<ffffffff811a69ce>] ? __might_fault+0x3e/0x90
[   34.075562]  [<ffffffffa038a430>] i915_gem_execbuffer2+0xc0/0x250 [i915]
[   34.075585]  [<ffffffff81552926>] drm_ioctl+0x1f6/0x480
[   34.075604]  [<ffffffff8100107a>] ? trace_hardirqs_on_thunk+0x1a/0x1c
[   34.075635]  [<ffffffffa038a370>] ? i915_gem_execbuffer+0x330/0x330 [i915]
[   34.075658]  [<ffffffff81202d2e>] do_vfs_ioctl+0x8e/0x690
[   34.075677]  [<ffffffff8181582d>] ? _raw_spin_unlock_irqrestore+0x3d/0x60
[   34.075700]  [<ffffffff810fcd51>] ? SyS_timer_settime+0x141/0x1e0
[   34.075721]  [<ffffffff810d6de2>] ? trace_hardirqs_on_caller+0x122/0x1b0
[   34.075742]  [<ffffffff8120336c>] SyS_ioctl+0x3c/0x70
[   34.075760]  [<ffffffff8181602e>] entry_SYSCALL_64_fastpath+0x1c/0xb1
[   34.075781] Code: 44 a0 48 c7 c2 9a 7e 43 a0 be e0 0d 00 00 48 c7 c7 a0 45 44 a0 e8 55 b8 ce e0 48 85 db 74 a3 49 83 bd f8 03 00 00 00 74 99 0f 0b <0f> 0b 48 89 da 4c 89 ee 4c 89 e7 e8 04 a9 ff ff 48 89 da 49 89
[   34.075955] RIP  [<ffffffffa0392cbc>] i915_gem_obj_lookup_or_create_vma+0x8c/0xc0 [i915]
[   34.075994]  RSP <ffffc90000527b68>

Testcase: igt/gem_close_race/basic-threads
Fixes: db6c2b41 ("drm/i915: Store the vma in an rbtree...")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161104161241.25871-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

All the unused entries in the page table tree(PML4E->PDPE->PDE->PTE)
should point to scratch page table/scratch page to avoid page walk error
due to the page prefetching.
When removing an entry in shadow PPGTT,  it need map to scratch page
also, the older implementation use single scratch page to assign to all
level entries, it doesn't align the page walk behavior when removed
entry is in PML, PDP, PD.  To avoid potential page walk error this patch
implement a scratch page tree to replace the single scratch page.

v2: more details in commit message address Kevin's comments.
Signed-off-by: NPing Gao <ping.a.gao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

When SW wishes to reset the render engine, it will program
engine's reset control register and wait response from HW.
We need emulate the behavior of this register so guest i915
driver could walk through the engine reset flow. The registers
are not emulated in gvt yet, this patch add the emulation
logic.

v2: add more desc info in commit message.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>
Signed-off-by: NDu, Changbin <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

From commit e95433c7, workload status setting
was changed to only capture on error path, but we need to set it properly in
normal path too, otherwise we'll fail to complete workload which could lead
guest VM vGPU reset.

v2: uses braces and add Fixes tag.

Fixes: e95433c7 ("drm/i915: Rearrange i915_wait_request() accounting with callers")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Misc ctl related registers are for WA purpose, should detect the
stepping info first before updating HW value.
Signed-off-by: NPing Gao <ping.a.gao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Need a explicit write_vreg in TLB MMIO write handler, beside that
TLB vreg should update correspondingly following HW status to do
correct emulation.
Signed-off-by: NPing Gao <ping.a.gao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Missing write_vreg in DMA_CTRL write handler would make obsolete
value return when read vreg.

v2: get data from vreg after updating it.
Signed-off-by: NPing Gao <ping.a.gao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Remove the variable 'execlist' as it's unused in function
vgpu_has_pending_workload.
Signed-off-by: NPing Gao <ping.a.gao@intel.com>
Reviewed-by: NZhi Wang <zhi.a.wang@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

This is to fix smatch warning on

     drivers/gpu/drm/i915/gvt/cmd_parser.c:1421 cmd_handler_mi_op_2f()
     warn: shift has higher precedence than mask

We need bits 20-19 mask for data size.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Now that we don't run the connector reprobing from i915_drm_resume(), we
need to make it so we don't have to wait for reprobing to finish so that
we actually speed things up. In order to do this, we need to make sure
that i915_drm_resume() doesn't get blocked by i915_hpd_poll_init_work()
while trying to acquire the mode_config lock that
drm_kms_helper_poll_enable() needs to acquire.

The easiest way to do this is to just enable polling before hpd. This
shouldn't break anything since at that point we have everything else we
need for polling enabled.

As well, this should result in a rather significant improvement in how
quickly we can resume the system.
Signed-off-by: NLyude <lyude@redhat.com>
Tested-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Testcase: analyze_suspend.py -config config/suspend-callgraph.cfg -filter i915

Weine's investigation on benchmarking the suspend/resume process pointed
out a lot of the time in suspend/resume is being spent reprobing. While
the reprobing process is a lengthy one for good reason, we don't need to
hold up the entire suspend/resume process while we wait for it to
finish. Luckily as it turns out, we already trigger a full connector
reprobe in i915_hpd_poll_init_work(), so we can just ditch reprobing in
i915_drm_resume() entirely.

This won't lead to less time spent resuming just yet since now the
bottleneck will be waiting for the mode_config lock in
drm_kms_helper_poll_enable(), since that will be held as long as
i915_hpd_poll_init_work() is reprobing all of the connectors. But we'll
address that in the next patch.
Signed-off-by: NLyude <lyude@redhat.com>
Tested-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Testcase: analyze_suspend.py -config config/suspend-callgraph.cfg -filter i915

According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.

Let's apply this work around to GEN9 platforms too, as it fixes the same
issue.

v2: Move drm_device to drm_i915_private conversion

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907
Cc: stable@vger.kernel.org
Cc: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478117601-19122-1-git-send-email-dhinakaran.pandiyan@intel.com

According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.

From BSpec:
"Display» BDW-SKL» dpr» [Register] DP_TP_CTL [BDW+,EXCLUDE(CHV)]
Workaround : Do not use DisplayPort with CDCLK less than 432 MHz, audio
enabled, port width x4, and link rate HBR2 (5.4 GHz), or else there may
be audio corruption or screen corruption."

Since, some DP configurations (e.g., MST) use port width x4 and HBR2
link rate, let's increase the cdclk to >= 432 MHz to enable audio for those
cases.

v4: Changed commit message
v3: Combine BDW pixel rate adjustments into a function (Jani)
v2: Restrict fix to BDW
    Retain the set cdclk across modesets (Ville)
Cc: stable@vger.kernel.org
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478026080-2925-1-git-send-email-dhinakaran.pandiyan@intel.com

commit bc0629a7 ("drm/i915: Track pages pinned due to swizzling
quirk") fixed one problem, but revealed a whole lot more. The root cause
of the pin count mismatch for the swizzle quirk (for L-shaped memory on
gen3/4) was that we were incrementing the pages_pin_count upon getting
the backing pages but then overwriting the pages_pin_count to set it to
1 afterwards. With a little bit of adjustment to satisfy the GEM_BUG_ON
sanitychecks, the fix is to replace the explicit atomic_set with an
atomic_inc.

v2: Consistently use atomics (not mix atomics and helpers) within the
lowlevel get_pages routines. This makes the atomic operations much
clearer.

Fixes: 1233e2db ("drm/i915: Move object backing storage manipulation")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161104103001.27643-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

When supplying a view to vma_compare() it is required that the supplied
i915_address_space is the global GTT. I tested the VMA instead (which is
the current position in the rbtree and maybe from any address space).
Reported-by: NMatthew Auld <matthew.auld@intel.com>
Tested-by: NMatthew Auld <matthew.auld@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98579
Fixes: db6c2b41 ("drm/i915: Store the vma in an rbtree...")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161103200852.23431-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>

Use i915_gem_object_pin_map() for the guc client's lifetime to replace
the peristent kmap + frequent kmap_atomic with a permanent vmapping.
This avoids taking the obj->mm.lock mutex whilst inside irq context
later.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98571
Fixes: 96d77634 ("drm/i915: Use a radixtree for random access...");
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161102175051.29163-9-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

We can use the preferred KMEM_CACHE helper for brevity.

Also simplifiy error unwind by only setting the ENOMEM
error code once.

v2: Add forgotten changes. (Joonas Lahtinen)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v1)
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478099699-28652-1-git-send-email-tvrtko.ursulin@linux.intel.com

Move has_64bit_reloc into dev_priv->info. This will make it visible
in the feature listing debug output.

v2:
- Keep the struct member to keep GCC fragile but happy (Chris)
v3:
- More detailed commit message (Chris)
- Include forgotten CHV and BXT (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478162386-5018-1-git-send-email-joonas.lahtinen@linux.intel.com

When looking at freezes whilst working on execlists, knowing the order
of the pending requests in the driver is useful.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161027000348.4641-2-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

$ sed -i -r 's/\bglobal_list\b/global_link/g' *.c *.h

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478081764-8058-1-git-send-email-joonas.lahtinen@linux.intel.com