commit b704441e38f645dcfba1348ca3cc1ba43d1a9f31 upstream.

We observed some premature timeouts on a virtualization platform, the log
is like this:

case 1:
[159525.255629] mmc1: Internal clock never stabilised.
[159525.255818] mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
[159525.256049] mmc1: sdhci: Sys addr:  0x00000000 | Version:  0x00001002
...
[159525.257205] mmc1: sdhci: Wake-up:   0x00000000 | Clock:    0x0000fa03
From the clock control register dump, we are pretty sure the clock was
stablized.

case 2:
[  914.550127] mmc1: Reset 0x2 never completed.
[  914.550321] mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
[  914.550608] mmc1: sdhci: Sys addr:  0x00000010 | Version:  0x00001002

After checking the sdhci code, we found the timeout check actually has a
little window that the CPU can be scheduled out and when it comes back,
the original time set or check is not valid.

Fixes: 5a436cc0 ("mmc: sdhci: Optimize delay loops")
Cc: stable@vger.kernel.org      # v4.12+
Signed-off-by: NAlek Du <alek.du@intel.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit db2039fcfd5754d15986340152e4503737f68f8d upstream.

Commit 7d33c358 ("mmc: sdhci-omap: Workaround for Errata i802")
disabled DCRC interrupts during tuning. This write to the interrupt
enable register gets overwritten in sdhci_prepare_data() and the
interrupt is not in fact disabled. Fix this by disabling the interrupt
in the host->ier variable.

Fixes: 7d33c358 ("mmc: sdhci-omap: Workaround for Errata i802")
Cc: <stable@vger.kernel.org>
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a44f7cb937321d4961bfc8f28912126b06e701c5 upstream.

When sending out CMD23 in the blk preparation, the comment there
rightfully says:

	 * However, it is not sufficient to just send CMD23,
	 * and avoid the final CMD12, as on an error condition
	 * CMD12 (stop) needs to be sent anyway. This, coupled
	 * with Auto-CMD23 enhancements provided by some
	 * hosts, means that the complexity of dealing
	 * with this is best left to the host. If CMD23 is
	 * supported by card and host, we'll fill sbc in and let
	 * the host deal with handling it correctly.

Let's do this behaviour for RPMB as well, and not send CMD23
independently. Otherwise IP cores (like Renesas SDHI) may timeout
because of automatic CMD23/CMD12 handling.
Reported-by: NMasaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: NClément Péron <peron.clem@gmail.com>
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Cc: stable@vger.kernel.org
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e8cde625bfe8a714a856e1366bcbb259d7346095 upstream.

Since v2.6.22 or so there has been reports [1] about OMAP MMC being
broken on OMAP15XX based hardware (OMAP5910 and OMAP310). The breakage
seems to have been caused by commit 46a6730e ("mmc-omap: Fix
omap to use MMC_POWER_ON") that changed clock enabling to be done
on MMC_POWER_ON. This can happen multiple times in a row, and on 15XX
the hardware doesn't seem to like it and the MMC just stops responding.
Fix by memorizing the power mode and do the init only when necessary.

Before the patch (on Palm TE):

	mmc0: new SD card at address b368
	mmcblk0: mmc0:b368 SDC   977 MiB
	mmci-omap mmci-omap.0: command timeout (CMD18)
	mmci-omap mmci-omap.0: command timeout (CMD13)
	mmci-omap mmci-omap.0: command timeout (CMD13)
	mmci-omap mmci-omap.0: command timeout (CMD12) [x 6]
	mmci-omap mmci-omap.0: command timeout (CMD13) [x 6]
	mmcblk0: error -110 requesting status
	mmci-omap mmci-omap.0: command timeout (CMD8)
	mmci-omap mmci-omap.0: command timeout (CMD18)
	mmci-omap mmci-omap.0: command timeout (CMD13)
	mmci-omap mmci-omap.0: command timeout (CMD13)
	mmci-omap mmci-omap.0: command timeout (CMD12) [x 6]
	mmci-omap mmci-omap.0: command timeout (CMD13) [x 6]
	mmcblk0: error -110 requesting status
	mmcblk0: recovery failed!
	print_req_error: I/O error, dev mmcblk0, sector 0
	Buffer I/O error on dev mmcblk0, logical block 0, async page read
	 mmcblk0: unable to read partition table

After the patch:

	mmc0: new SD card at address b368
	mmcblk0: mmc0:b368 SDC   977 MiB
	 mmcblk0: p1

The patch is based on a fix and analysis done by Ladislav Michl.

Tested on OMAP15XX/OMAP310 (Palm TE), OMAP1710 (Nokia 770)
and OMAP2420 (Nokia N810).

[1] https://marc.info/?t=123175197000003&r=1&w=2

Fixes: 46a6730e ("mmc-omap: Fix omap to use MMC_POWER_ON")
Reported-by: NLadislav Michl <ladis@linux-mips.org>
Reported-by: NAndrzej Zaborowski <balrogg@gmail.com>
Tested-by: NLadislav Michl <ladis@linux-mips.org>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 91ff20f34e94424e586f57f4f593beae16504f86 upstream.

Theodore Ts'o reported a v4.19 regression with docker-dropbox:
https://marc.info/?l=linux-fsdevel&m=154070089431116&w=2

"I was rebuilding my dropbox Docker container, and it failed in 4.19
 with the following error:
 ...
 dpkg: error: error creating new backup file \
              '/var/lib/dpkg/status-old': Invalid cross-device link"

The problem did not reproduce with metacopy feature disabled.
The error was caused by insufficient credentials to set
"trusted.overlay.redirect" xattr on link of a metacopy file.

Reproducer:

 echo Y > /sys/module/overlay/parameters/redirect_dir
 echo Y > /sys/module/overlay/parameters/metacopy
 cd /tmp
 mkdir l u w m
 chmod 777 l u
 touch l/foo
 ln l/foo l/link
 chmod 666 l/foo
 mount -t overlay none -olowerdir=l,upperdir=u,workdir=w m
 su fsgqa
 ln m/foo m/bar
 [   21.455823] overlayfs: failed to set redirect (-1)
 ln: failed to create hard link 'm/bar' => 'm/foo':\
     Invalid cross-device link
Reported-by: NTheodore Y. Ts'o <tytso@mit.edu>
Reported-by: NMaciej Zięba <maciekz82@gmail.com>
Fixes: 4120fe64 ("ovl: Set redirect on upper inode when it is linked")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 155b8a0492a90a4c6e22f046a3568b92a6bc48da upstream.

When decoding a lower file handle, we first call ovl_check_origin_fh()
with connected=false to get any real lower dentry for overlay inode
cache lookup.

If the real dentry is a disconnected dir dentry, ovl_check_origin_fh()
is called again with connected=true to get a connected real dentry
and find the lower layer the real dentry belongs to.

If the first call returned a connected real dentry, we use it to
lookup an overlay connected dentry, but the first ovl_check_origin_fh()
call with connected=false did not check that the found dentry is under
the root of the layer (see ovl_acceptable()), it only checked that
the found dentry super block matches the uuid of the lower file handle.

In case there are multiple lower layers on the same fs and the found
dentry is not from the top most lower layer, using the layer index
returned from the first ovl_check_origin_fh() is wrong and we end
up failing to decode the file handle.

Fix this by always calling ovl_check_origin_fh() with connected=true
if we got a directory dentry in the first call.

Fixes: 8b58924a ("ovl: lookup in inode cache first when decoding...")
Cc: <stable@vger.kernel.org> # v4.17
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f55adad6 upstream.

We don't need to zero fill the bio if not using kernel allocated pages.

Fixes: f3587d76 ("block: Clear kernel memory before copying to user") # v4.20-rc2
Reported-by: NTodd Aiken <taiken@mvtech.ca>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: stable@vger.kernel.org
Cc: Bart Van Assche <bvanassche@acm.org>
Tested-by: NLaurence Oberman <loberman@redhat.com>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3238c359acee4ab57f15abb5a82b8ab38a661ee7 upstream.

We need to invalidate the caches *before* clearing the buffer via the
non-cacheable alias, else in the worst case __dma_flush_area() may
write back dirty lines over the top of our nice new zeros.

Fixes: dd65a941 ("arm64: dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag")
Cc: <stable@vger.kernel.org> # 4.18.x-
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 01e881f5a1fca4677e82733061868c6d6ea05ca7 upstream.

Calling UFFDIO_UNREGISTER on virtual ranges not yet registered in uffd
could trigger an harmless false positive WARN_ON.  Check the vma is
already registered before checking VM_MAYWRITE to shut off the false
positive warning.

Link: http://lkml.kernel.org/r/20181206212028.18726-2-aarcange@redhat.com
Cc: <stable@vger.kernel.org>
Fixes: 29ec90660d68 ("userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas")
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reported-by: syzbot+06c7092e7d71218a2c16@syzkaller.appspotmail.com
Acked-by: NMike Rapoport <rppt@linux.ibm.com>
Acked-by: NHugh Dickins <hughd@google.com>
Acked-by: NPeter Xu <peterx@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 61c6de667263184125d5ca75e894fcad632b0dd3 upstream.

migrate_page_move_mapping() expects pages with private data set to have
a page_count elevated by 1.  This is what used to happen for xfs through
the buffer_heads code before the switch to iomap in commit 82cb1417
("xfs: add support for sub-pagesize writeback without buffer_heads").
Not having the count elevated causes move_pages() to fail on memory
mapped files coming from xfs.

Make iomap compatible with the migrate_page_move_mapping() assumption by
elevating the page count as part of iomap_page_create() and lowering it
in iomap_page_release().

It causes the move_pages() syscall to misbehave on memory mapped files
from xfs.  It does not not move any pages, which I suppose is "just" a
perf issue, but it also ends up returning a positive number which is out
of spec for the syscall.  Talking to Michal Hocko, it sounds like
returning positive numbers might be a necessary update to move_pages()
anyway though
(https://lkml.kernel.org/r/20181116114955.GJ14706@dhcp22.suse.cz).

I only hit this in tests that verify that move_pages() actually moved
the pages.  The test also got confused by the positive return from
move_pages() (it got treated as a success as positive numbers were not
expected and not handled) making it a bit harder to track down what's
going on.

Link: http://lkml.kernel.org/r/20181115184140.1388751-1-pjaroszynski@nvidia.com
Fixes: 82cb1417 ("xfs: add support for sub-pagesize writeback without buffer_heads")
Signed-off-by: NPiotr Jaroszynski <pjaroszynski@nvidia.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Brian Foster <bfoster@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3a6ab5c7dc114057fd67750e308e1745dafc0e6a upstream.

The spdxcheck script currently falls over when confronted with a binary
file (such as Documentation/logo.gif).  To avoid that, always open files
in binary mode and decode line-by-line, ignoring encoding errors.

One tricky case is when piping data into the script and reading it from
standard input.  By default, standard input will be opened in text mode,
so we need to reopen it in binary mode.

The breakage only happens with python3 and results in a
UnicodeDecodeError (according to Uwe).

Link: http://lkml.kernel.org/r/20181212131210.28024-1-thierry.reding@gmail.com
Fixes: 6f4d29df66ac ("scripts/spdxcheck.py: make python3 compliant")
Signed-off-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NJeremy Cline <jcline@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joe Perches <joe@perches.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a538e3ff9dabcdf6c3f477a373c629213d1c3066 upstream.

Matthew pointed out that the ioctx_table is susceptible to spectre v1,
because the index can be controlled by an attacker.  The below patch
should mitigate the attack for all of the aio system calls.

Cc: stable@vger.kernel.org
Reported-by: NMatthew Wilcox <willy@infradead.org>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 478b6767 upstream.

Pin PH11 is used on various A83T board to detect a change in the OTG
port's ID pin, as in when an OTG host cable is plugged in.

The incorrect offset meant the gpiochip/irqchip was activating the wrong
pin for interrupts.

Fixes: 4730f33f ("pinctrl: sunxi: add allwinner A83T PIO controller support")
Cc: <stable@vger.kernel.org>
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In the linux-4.19 stable kernel, we get a warning about a type
mismatch between phys_addr_t and dma_addr_t:

drivers/gpu/drm/msm/disp/dpu1/dpu_dbg.c: In function '_dpu_dbg_dump_dpu_dbg_bus':
drivers/gpu/drm/msm/disp/dpu1/dpu_dbg.c:2003:16: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]
     list_size, &phys, GFP_KERNEL);
                ^~~~~
In file included from include/linux/dma-buf.h:31,
                 from drivers/gpu/drm/msm/disp/dpu1/dpu_dbg.c:20:
include/linux/dma-mapping.h:561:15: note: expected 'dma_addr_t *' {aka 'long long unsigned int *'} but argument is of type 'phys_addr_t *' {aka 'unsigned int *'}
   dma_addr_t *dma_handle, gfp_t flag)
   ~~~~~~~~~~~~^~~~~~~~~~
drivers/gpu/drm/msm/disp/dpu1/dpu_dbg.c: In function '_dpu_dbg_dump_vbif_dbg_bus':
drivers/gpu/drm/msm/disp/dpu1/dpu_dbg.c:2154:16: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]
     list_size, &phys, GFP_KERNEL);
                ^~~~~
In file included from include/linux/dma-buf.h:31,
                 from drivers/gpu/drm/msm/disp/dpu1/dpu_dbg.c:20:
include/linux/dma-mapping.h:561:15: note: expected 'dma_addr_t *' {aka 'long long unsigned int *'} but argument is of type 'phys_addr_t *' {aka 'unsigned int *'}

This code was removed in linux-4.20 with upstream commit effec874792f
("drm/msm/dpu: Remove dpu_dbg"). Rather than backporting the large
patch, this just fixes the warning by using the correct type.

Fixes: 25fdd593 ("drm/msm: Add SDM845 DPU support")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

Upstream commit 97291094 ("ARM: dts: qcom: Remove Arrow SD600
eval board") removed this file because there are no known users,
but in linux-4.19.y, we still get a compile-time warnign for it:

arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dtb: Warning (graph_endpoint): /soc/mdp@5100000/ports/port@3/endpoint: graph connection to node '/soc/hdmi-tx@4a00000/ports/port@0/endpoint' is not bidirectional

Address the warning by adding the remote endpoint that makes the link
bidirectional. This is the same property that other boards use.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

Upstream commit 3e9efc3299dd ("i2c: aspeed: Handle master/slave combined irq events
properly") reworked the interrupt handling and fixed a warning in the process:

drivers/i2c/busses/i2c-aspeed.c: In function 'aspeed_i2c_bus_irq':
drivers/i2c/busses/i2c-aspeed.c:567:1: error: label 'out' defined but not used [-Werror=unused-label]

The warning is still present in v4.19.8 and can be fixed either by applying
that original patch, or by adding a simple #ifdef.

Here, I choose the second simpler option as the original patch seems too
invasive for a stable backport.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NBrendan Higgins <brendanhiggins@google.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

Commit 2e6ae11dd0d1c37f44cec51a58fb2092e55ed0f5 upstream.

qcom_slim_ngd_runtime_suspend is protected by an #ifdef,
qcom_slim_ngd_runtime_idle is now, which causes a build time warning:

drivers/slimbus/qcom-ngd-ctrl.c:1470:12: error: 'qcom_slim_ngd_runtime_idle' defined but not used [-Werror=unused-function]

Marking both as __maybe_unused lets us get rid of the warning
as well as the #ifdef.

Fixes: 917809e2 ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

Commit 33f49571d75024b1044cd02689ad2bdb4924cc80 upstream.

  WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE
    Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n]
    Selected by [y]:
    - FB_OLPC_DCON [=y] && STAGING [=y] && X86 [=y] && OLPC [=y] && FB [=y]
                        && I2C [=y] && (GPIO_CS5535 [=n] || GPIO_CS5535 [=n]=n)
Signed-off-by: NLubomir Rintel <lkundrak@v3.sk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

Commit 0eeec014 upstream.

I ran into a new warning on randconfig kernels:

drivers/scsi/raid_class.c: In function 'raid_match':
drivers/scsi/raid_class.c:64:24: error: unused variable 'i' [-Werror=unused-variable]

This looks like a very old problem that for some reason was very hard to
run into, but it is very easy to fix, by replacing the incorrect #ifdef
with a simpler IS_ENABLED() check.

Fixes: fac829fd ("[SCSI] raid_attrs: fix dependency problems")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

Commit 11d4afd4ff667f9b6178ee8c142c36cb78bd84db upstream.

Create a config for enabling irq load tracking in the scheduler.
irq load tracking is useful only when irq or paravirtual time is
accounted but it's only possible with SMP for now.

Also use __maybe_unused to remove the compilation warning in
update_rq_clock_task() that has been introduced by:

  2e62c474 ("sched/fair: Remove #ifdefs from scale_rt_capacity()")
Suggested-by: NIngo Molnar <mingo@redhat.com>
Reported-by: NDou Liyang <douly.fnst@cn.fujitsu.com>
Reported-by: NMiguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: NVincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: dou_liyang@163.com
Fixes: 2e62c474 ("sched/fair: Remove #ifdefs from scale_rt_capacity()")
Link: http://lkml.kernel.org/r/1537867062-27285-1-git-send-email-vincent.guittot@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit f9bfe4e6a9d08d405fe7b081ee9a13e649c97ecf upstream.

tcp_tso_should_defer() can return true in three different cases :

 1) We are cwnd-limited
 2) We are rwnd-limited
 3) We are application limited.

Neal pointed out that my recent fix went too far, since
it assumed that if we were not in 1) case, we must be rwnd-limited

Fix this by properly populating the is_cwnd_limited and
is_rwnd_limited booleans.

After this change, we can finally move the silly check for FIN
flag only for the application-limited case.

The same move for EOR bit will be handled in net-next,
since commit 1c09f7d073b1 ("tcp: do not try to defer skbs
with eor mark (MSG_EOR)") is scheduled for linux-4.21

Tested by running 200 concurrent netperf -t TCP_RR -- -r 60000,100
and checking none of them was rwnd_limited in the chrono_stat
output from "ss -ti" command.

Fixes: 41727549de3e ("tcp: Do not underestimate rwnd_limited")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Suggested-by: NNeal Cardwell <ncardwell@google.com>
Reviewed-by: NNeal Cardwell <ncardwell@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit afd594240806acc138cf696c09f2f4829d55d02f upstream.

When patching in a new sequence for the first insn of a subprog, the start
 of that subprog does not change (it's the first insn of the sequence), so
 adjust_subprog_starts should check start <= off (rather than < off).
Also added a test to test_verifier.c (it's essentially the syz reproducer).

Fixes: cc8b0b92 ("bpf: introduce function calls (function boundaries)")
Reported-by: syzbot+4fc427c7af994b0948be@syzkaller.appspotmail.com
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Acked-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 36d842194a57f1b21fbc6a6875f2fa2f9a7f8679 upstream.

When running with KASAN, the following trace is produced:

[   62.535888]

==================================================================
[   62.544930] BUG: KASAN: slab-out-of-bounds in
gut_hw_stats+0x122/0x230 [hfi1]
[   62.553856] Write of size 8 at addr ffff88080e8d6330 by task
kworker/0:1/14

[   62.565333] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted
4.19.0-test-build-kasan+ #8
[   62.575087] Hardware name: Intel Corporation S2600KPR/S2600KPR, BIOS
SE5C610.86B.01.01.0019.101220160604 10/12/2016
[   62.587951] Workqueue: events work_for_cpu_fn
[   62.594050] Call Trace:
[   62.598023]  dump_stack+0xc6/0x14c
[   62.603089]  ? dump_stack_print_info.cold.1+0x2f/0x2f
[   62.610041]  ? kmsg_dump_rewind_nolock+0x59/0x59
[   62.616615]  ? get_hw_stats+0x122/0x230 [hfi1]
[   62.622985]  print_address_description+0x6c/0x23c
[   62.629744]  ? get_hw_stats+0x122/0x230 [hfi1]
[   62.636108]  kasan_report.cold.6+0x241/0x308
[   62.642365]  get_hw_stats+0x122/0x230 [hfi1]
[   62.648703]  ? hfi1_alloc_rn+0x40/0x40 [hfi1]
[   62.655088]  ? __kmalloc+0x110/0x240
[   62.660695]  ? hfi1_alloc_rn+0x40/0x40 [hfi1]
[   62.667142]  setup_hw_stats+0xd8/0x430 [ib_core]
[   62.673972]  ? show_hfi+0x50/0x50 [hfi1]
[   62.680026]  ib_device_register_sysfs+0x165/0x180 [ib_core]
[   62.687995]  ib_register_device+0x5a2/0xa10 [ib_core]
[   62.695340]  ? show_hfi+0x50/0x50 [hfi1]
[   62.701421]  ? ib_unregister_device+0x2e0/0x2e0 [ib_core]
[   62.709222]  ? __vmalloc_node_range+0x2d0/0x380
[   62.716131]  ? rvt_driver_mr_init+0x11f/0x2d0 [rdmavt]
[   62.723735]  ? vmalloc_node+0x5c/0x70
[   62.729697]  ? rvt_driver_mr_init+0x11f/0x2d0 [rdmavt]
[   62.737347]  ? rvt_driver_mr_init+0x1f5/0x2d0 [rdmavt]
[   62.744998]  ? __rvt_alloc_mr+0x110/0x110 [rdmavt]
[   62.752315]  ? rvt_rc_error+0x140/0x140 [rdmavt]
[   62.759434]  ? rvt_vma_open+0x30/0x30 [rdmavt]
[   62.766364]  ? mutex_unlock+0x1d/0x40
[   62.772445]  ? kmem_cache_create_usercopy+0x15d/0x230
[   62.780115]  rvt_register_device+0x1f6/0x360 [rdmavt]
[   62.787823]  ? rvt_get_port_immutable+0x180/0x180 [rdmavt]
[   62.796058]  ? __get_txreq+0x400/0x400 [hfi1]
[   62.802969]  ? memcpy+0x34/0x50
[   62.808611]  hfi1_register_ib_device+0xde6/0xeb0 [hfi1]
[   62.816601]  ? hfi1_get_npkeys+0x10/0x10 [hfi1]
[   62.823760]  ? hfi1_init+0x89f/0x9a0 [hfi1]
[   62.830469]  ? hfi1_setup_eagerbufs+0xad0/0xad0 [hfi1]
[   62.838204]  ? pcie_capability_clear_and_set_word+0xcd/0xe0
[   62.846429]  ? pcie_capability_read_word+0xd0/0xd0
[   62.853791]  ? hfi1_pcie_init+0x187/0x4b0 [hfi1]
[   62.860958]  init_one+0x67f/0xae0 [hfi1]
[   62.867301]  ? hfi1_init+0x9a0/0x9a0 [hfi1]
[   62.873876]  ? wait_woken+0x130/0x130
[   62.879860]  ? read_word_at_a_time+0xe/0x20
[   62.886329]  ? strscpy+0x14b/0x280
[   62.891998]  ? hfi1_init+0x9a0/0x9a0 [hfi1]
[   62.898405]  local_pci_probe+0x70/0xd0
[   62.904295]  ? pci_device_shutdown+0x90/0x90
[   62.910833]  work_for_cpu_fn+0x29/0x40
[   62.916750]  process_one_work+0x584/0x960
[   62.922974]  ? rcu_work_rcufn+0x40/0x40
[   62.928991]  ? __schedule+0x396/0xdc0
[   62.934806]  ? __sched_text_start+0x8/0x8
[   62.941020]  ? pick_next_task_fair+0x68b/0xc60
[   62.947674]  ? run_rebalance_domains+0x260/0x260
[   62.954471]  ? __list_add_valid+0x29/0xa0
[   62.960607]  ? move_linked_works+0x1c7/0x230
[   62.967077]  ?
trace_event_raw_event_workqueue_execute_start+0x140/0x140
[   62.976248]  ? mutex_lock+0xa6/0x100
[   62.982029]  ? __mutex_lock_slowpath+0x10/0x10
[   62.988795]  ? __switch_to+0x37a/0x710
[   62.994731]  worker_thread+0x62e/0x9d0
[   63.000602]  ? max_active_store+0xf0/0xf0
[   63.006828]  ? __switch_to_asm+0x40/0x70
[   63.012932]  ? __switch_to_asm+0x34/0x70
[   63.019013]  ? __switch_to_asm+0x40/0x70
[   63.025042]  ? __switch_to_asm+0x34/0x70
[   63.031030]  ? __switch_to_asm+0x40/0x70
[   63.037006]  ? __schedule+0x396/0xdc0
[   63.042660]  ? kmem_cache_alloc_trace+0xf3/0x1f0
[   63.049323]  ? kthread+0x59/0x1d0
[   63.054594]  ? ret_from_fork+0x35/0x40
[   63.060257]  ? __sched_text_start+0x8/0x8
[   63.066212]  ? schedule+0xcf/0x250
[   63.071529]  ? __wake_up_common+0x110/0x350
[   63.077794]  ? __schedule+0xdc0/0xdc0
[   63.083348]  ? wait_woken+0x130/0x130
[   63.088963]  ? finish_task_switch+0x1f1/0x520
[   63.095258]  ? kasan_unpoison_shadow+0x30/0x40
[   63.101792]  ? __init_waitqueue_head+0xa0/0xd0
[   63.108183]  ? replenish_dl_entity.cold.60+0x18/0x18
[   63.115151]  ? _raw_spin_lock_irqsave+0x25/0x50
[   63.121754]  ? max_active_store+0xf0/0xf0
[   63.127753]  kthread+0x1ae/0x1d0
[   63.132894]  ? kthread_bind+0x30/0x30
[   63.138422]  ret_from_fork+0x35/0x40

[   63.146973] Allocated by task 14:
[   63.152077]  kasan_kmalloc+0xbf/0xe0
[   63.157471]  __kmalloc+0x110/0x240
[   63.162804]  init_cntrs+0x34d/0xdf0 [hfi1]
[   63.168883]  hfi1_init_dd+0x29a3/0x2f90 [hfi1]
[   63.175244]  init_one+0x551/0xae0 [hfi1]
[   63.181065]  local_pci_probe+0x70/0xd0
[   63.186759]  work_for_cpu_fn+0x29/0x40
[   63.192310]  process_one_work+0x584/0x960
[   63.198163]  worker_thread+0x62e/0x9d0
[   63.203843]  kthread+0x1ae/0x1d0
[   63.208874]  ret_from_fork+0x35/0x40

[   63.217203] Freed by task 1:
[   63.221844]  __kasan_slab_free+0x12e/0x180
[   63.227844]  kfree+0x92/0x1a0
[   63.232570]  single_release+0x3a/0x60
[   63.238024]  __fput+0x1d9/0x480
[   63.242911]  task_work_run+0x139/0x190
[   63.248440]  exit_to_usermode_loop+0x191/0x1a0
[   63.254814]  do_syscall_64+0x301/0x330
[   63.260283]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[   63.270199] The buggy address belongs to the object at
ffff88080e8d5500
 which belongs to the cache kmalloc-4096 of size 4096
[   63.287247] The buggy address is located 3632 bytes inside of
 4096-byte region [ffff88080e8d5500, ffff88080e8d6500)
[   63.303564] The buggy address belongs to the page:
[   63.310447] page:ffffea00203a3400 count:1 mapcount:0
mapping:ffff88081380e840 index:0x0 compound_mapcount: 0
[   63.323102] flags: 0x2fffff80008100(slab|head)
[   63.329775] raw: 002fffff80008100 0000000000000000 0000000100000001
ffff88081380e840
[   63.340175] raw: 0000000000000000 0000000000070007 00000001ffffffff
0000000000000000
[   63.350564] page dumped because: kasan: bad access detected

[   63.361974] Memory state around the buggy address:
[   63.369137]  ffff88080e8d6200: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
[   63.379082]  ffff88080e8d6280: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
[   63.389032] >ffff88080e8d6300: 00 00 00 00 00 00 fc fc fc fc fc fc fc
fc fc fc
[   63.398944]                                      ^
[   63.406141]  ffff88080e8d6380: fc fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc
[   63.416109]  ffff88080e8d6400: fc fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc
[   63.426099]
==================================================================

The trace happens because get_hw_stats() assumes there is room in the
memory allocated in init_cntrs() to accommodate the driver counters.
Unfortunately, that routine only allocated space for the device
counters.

Fix by insuring the allocation has room for the additional driver
counters.

Cc: <Stable@vger.kernel.org> # v4.14+
Fixes: b7481944 ("IB/hfi1: Show statistics counters under IB stats interface")
Reviewed-by: NMike Marciniczyn <mike.marciniszyn@intel.com>
Reviewed-by: NMike Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NPiotr Stankiewicz <piotr.stankiewicz@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6ba189c5 upstream.

Users reported a mute LED regression on Lenovo X1 Carbon, the root
cause is we applied the fixup of ALC285_FIXUP_LENOVO_HEADPHONE_NOISE
to this machine, then the machine can't apply the fixup of
ALC269_FIXUP_THINKPAD_ACPI anymore. To fix it, we chain two fixup
together.

Fixes: c4cfcf6f ("ALSA: hda/realtek - fix the pop noise on headphone for lenovo laptops")
Cc: <stable@vger.kernel.org>
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0bea4cc8 upstream.

The ASUS UX433FN and UX333FA with ALC294 cannot detect the headset MIC
and output through the internal speaker and the headphone until
ALC294_FIXUP_ASUS_SPK and ALC294_FIXUP_ASUS_HEADSET_MIC quirk applied.
Signed-off-by: NDaniel Drake <drake@endlessm.com>
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4e051106 upstream.

The ASUS UX533FD with ALC294 cannot detect the headset MIC and outputs
through the internal speaker and the headphone until
ALC294_FIXUP_ASUS_SPK and ALC294_FIXUP_ASUS_HEADSET_MIC quirk applied.
Signed-off-by: NDaniel Drake <drake@endlessm.com>
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d8ae458e upstream.

The known ALC256_FIXUP_ASUS_MIC fixup can fix the headphone jack
sensing and enable use of the internal microphone on this laptop
X542UN. However, it's ALC294 so create a new fixup named
ALC294_FIXUP_ASUS_MIC to avoid confusion.
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: NDaniel Drake <drake@endlessm.com>
Signed-off-by: NChris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bde1a745 upstream.

If it plugged headphone or headset into the jack, then
do the reboot, it will have a chance to cause headphone no sound.
It just need to run the headphone mode procedure after boot time.
The issue will be fixed.
It also suitable for ALC234 ALC274 and ALC294.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fa9c98e4b975bb3192ed6af09d9fa282ed3cd8a0 upstream.

In an initial commit, 'SYNC_STATUS' register is referred to get
clock configuration, however this is wrong, according to my local
note at hand for reverse-engineering about packet dump. It should
be 'CLOCK_CONFIG' register. Actually, ff400_dump_clock_config()
is correctly programmed.

This commit fixes the bug.

Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 76fdb3a9 ('ALSA: fireface: add support for Fireface 400')
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c93db7bb6ef3251e0ea48ade311d3e9942748e1c upstream.

If we race with inode destroy, it's possible for page->mapping to be
NULL before we even enter this routine, as well as after having slept
waiting for the dax entry to become unlocked.

Fixes: c2a7d2a1 ("filesystem-dax: Introduce dax_lock_mapping_entry()")
Cc: <stable@vger.kernel.org>
Reported-by: NJan Kara <jack@suse.cz>
Signed-off-by: NMatthew Wilcox <willy@infradead.org>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 320f35b7bf8cccf1997ca3126843535e1b95e9c4 upstream.

Since commit bb21ce0ad227 we always enforce per-mirror stateid.
However, this makes sense only for v4+ servers.
Signed-off-by: NTigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 164f7e586739d07eb56af6f6d66acebb11f315c8 ]

ocfs2_get_dentry() calls iput(inode) to drop the reference count of
inode, and if the reference count hits 0, inode is freed.  However, in
this function, it then reads inode->i_generation, which may result in a
use after free bug.  Move the put operation later.

Link: http://lkml.kernel.org/r/1543109237-110227-1-git-send-email-bianpan2016@163.com
Fixes: 781f200c("ocfs2: Remove masklog ML_EXPORT.")
Signed-off-by: NPan Bian <bianpan2016@163.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7c0950d4 ]

sys_link() can fail due to the new path already existing.  This case
ofen occurs when we use a concated initrd, for example:

1) prepare a basic rootfs, it contains a regular files rc.local
lizhijian@:~/yocto-tiny-i386-2016-04-22$ cat etc/rc.local
 #!/bin/sh
 echo "Running /etc/rc.local..."
yocto-tiny-i386-2016-04-22$ find . | sed 's,^\./,,' | cpio -o -H newc | gzip -n -9 >../rootfs.cgz

2) create a extra initrd which also includes a etc/rc.local
lizhijian@:~/lkp-x86_64/etc$ echo "append initrd" >rc.local
lizhijian@:~/lkp/lkp-x86_64/etc$ cat rc.local
append initrd
lizhijian@:~/lkp/lkp-x86_64/etc$ ln rc.local rc.local.hardlink
append initrd
lizhijian@:~/lkp/lkp-x86_64/etc$ stat rc.local rc.local.hardlink
  File: 'rc.local'
  Size: 14        	Blocks: 8          IO Block: 4096   regular file
Device: 801h/2049d	Inode: 11296086    Links: 2
Access: (0664/-rw-rw-r--)  Uid: ( 1002/lizhijian)   Gid: ( 1002/lizhijian)
Access: 2018-11-15 16:08:28.654464815 +0800
Modify: 2018-11-15 16:07:57.514903210 +0800
Change: 2018-11-15 16:08:24.180228872 +0800
 Birth: -
  File: 'rc.local.hardlink'
  Size: 14        	Blocks: 8          IO Block: 4096   regular file
Device: 801h/2049d	Inode: 11296086    Links: 2
Access: (0664/-rw-rw-r--)  Uid: ( 1002/lizhijian)   Gid: ( 1002/lizhijian)
Access: 2018-11-15 16:08:28.654464815 +0800
Modify: 2018-11-15 16:07:57.514903210 +0800
Change: 2018-11-15 16:08:24.180228872 +0800
 Birth: -

lizhijian@:~/lkp/lkp-x86_64$ find . | sed 's,^\./,,' | cpio -o -H newc | gzip -n -9 >../rc-local.cgz
lizhijian@:~/lkp/lkp-x86_64$ gzip -dc ../rc-local.cgz | cpio -t
.
etc
etc/rc.local.hardlink <<< it will be extracted first at this initrd
etc/rc.local

3) concate 2 initrds and boot
lizhijian@:~/lkp$ cat rootfs.cgz rc-local.cgz >concate-initrd.cgz
lizhijian@:~/lkp$ qemu-system-x86_64 -nographic -enable-kvm -cpu host -smp 1 -m 1024 -kernel ~/lkp/linux/arch/x86/boot/bzImage -append "console=ttyS0 earlyprint=ttyS0 ignore_loglevel" -initrd ./concate-initr.cgz -serial stdio -nodefaults

In this case, sys_link(2) will fail and return -EEXIST, so we can only get
the rc.local at rootfs.cgz instead of rc-local.cgz

[akpm@linux-foundation.org: move code to avoid forward declaration]
Link: http://lkml.kernel.org/r/1542352368-13299-1-git-send-email-lizhijian@cn.fujitsu.comSigned-off-by: NLi Zhijian <lizhijian@cn.fujitsu.com>
Cc: Philip Li <philip.li@intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Li Zhijian <zhijianx.li@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 903e8ff86753e6f327bb92166a0665e4ecb8e2e7 ]

Since __sanitizer_cov_trace_pc() is marked as notrace, function calls in
__sanitizer_cov_trace_pc() shouldn't be traced either.
ftrace_graph_caller() gets called for each function that isn't marked
'notrace', like canonicalize_ip().  This is the call trace from a run:

[  139.644550]  ftrace_graph_caller+0x1c/0x24
[  139.648352]  canonicalize_ip+0x18/0x28
[  139.652313]  __sanitizer_cov_trace_pc+0x14/0x58
[  139.656184]  sched_clock+0x34/0x1e8
[  139.659759]  trace_clock_local+0x40/0x88
[  139.663722]  ftrace_push_return_trace+0x8c/0x1f0
[  139.667767]  prepare_ftrace_return+0xa8/0x100
[  139.671709]  ftrace_graph_caller+0x1c/0x24

Rework so that check_kcov_mode() and canonicalize_ip() that are called
from __sanitizer_cov_trace_pc() are also marked as notrace.

Link: http://lkml.kernel.org/r/20181128081239.18317-1-anders.roxell@linaro.orgSigned-off-by: NArnd Bergmann <arnd@arndb.de>
Signen-off-by: NAnders Roxell <anders.roxell@linaro.org>
Co-developed-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit dbd4af54745fc0c805217693c807a3928b2d408b ]

https://bugs.linaro.org/show_bug.cgi?id=3782

Turns out arm doesn't permit mapping address 0, so try minimum virtual
address instead.

Link: http://lkml.kernel.org/r/20181113165446.GA28157@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reported-by: NRafael David Tinoco <rafael.tinoco@linaro.org>
Tested-by: NRafael David Tinoco <rafael.tinoco@linaro.org>
Acked-by: NCyrill Gorcunov <gorcunov@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8de456cf ]

CONFIG_DEBUG_OBJECTS_RCU_HEAD does not play well with kmemleak due to
recursive calls.

fill_pool
  kmemleak_ignore
    make_black_object
      put_object
        __call_rcu (kernel/rcu/tree.c)
          debug_rcu_head_queue
            debug_object_activate
              debug_object_init
                fill_pool
                  kmemleak_ignore
                    make_black_object
                      ...

So add SLAB_NOLEAKTRACE to kmem_cache_create() to not register newly
allocated debug objects at all.

Link: http://lkml.kernel.org/r/20181126165343.2339-1-cai@gmx.usSigned-off-by: NQian Cai <cai@gmx.us>
Suggested-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NWaiman Long <longman@redhat.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c7d7d620dcbd2a1c595092280ca943f2fced7bbd ]

hfs_bmap_free() frees node via hfs_bnode_put(node).  However it then
reads node->this when dumping error message on an error path, which may
result in a use-after-free bug.  This patch frees node only when it is
never used.

Link: http://lkml.kernel.org/r/1543053441-66942-1-git-send-email-bianpan2016@163.comSigned-off-by: NPan Bian <bianpan2016@163.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ce96a407adef126870b3f4a1b73529dd8aa80f49 ]

hfs_bmap_free() frees the node via hfs_bnode_put(node).  However, it
then reads node->this when dumping error message on an error path, which
may result in a use-after-free bug.  This patch frees the node only when
it is never again used.

Link: http://lkml.kernel.org/r/1542963889-128825-1-git-send-email-bianpan2016@163.com
Fixes: a1185ffa2fc ("HFS rewrite")
Signed-off-by: NPan Bian <bianpan2016@163.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8f416836c0d50b198cad1225132e5abebf8980dc ]

init_currently_empty_zone() will adjust pgdat->nr_zones and set it to
'zone_idx(zone) + 1' unconditionally.  This is correct in the normal
case, while not exact in hot-plug situation.

This function is used in two places:

  * free_area_init_core()
  * move_pfn_range_to_zone()

In the first case, we are sure zone index increase monotonically.  While
in the second one, this is under users control.

One way to reproduce this is:
----------------------------

1. create a virtual machine with empty node1

   -m 4G,slots=32,maxmem=32G \
   -smp 4,maxcpus=8          \
   -numa node,nodeid=0,mem=4G,cpus=0-3 \
   -numa node,nodeid=1,mem=0G,cpus=4-7

2. hot-add cpu 3-7

   cpu-add [3-7]

2. hot-add memory to nod1

   object_add memory-backend-ram,id=ram0,size=1G
   device_add pc-dimm,id=dimm0,memdev=ram0,node=1

3. online memory with following order

   echo online_movable > memory47/state
   echo online > memory40/state

After this, node1 will have its nr_zones equals to (ZONE_NORMAL + 1)
instead of (ZONE_MOVABLE + 1).

Michal said:
 "Having an incorrect nr_zones might result in all sorts of problems
  which would be quite hard to debug (e.g. reclaim not considering the
  movable zone). I do not expect many users would suffer from this it
  but still this is trivial and obviously right thing to do so
  backporting to the stable tree shouldn't be harmful (last famous
  words)"

Link: http://lkml.kernel.org/r/20181117022022.9956-1-richard.weiyang@gmail.com
Fixes: f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded memory to zones until online")
Signed-off-by: NWei Yang <richard.weiyang@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>