kmemcheck complains that ->redirect_genid doesn't get initialized.
Presumably it should be set to zero.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

make C=2 CF="-D__CHECK_ENDIAN__" M=net

And fix flowi4_init_output() prototype for sport
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For net part, remove duplicate included header.
Signed-off-by: NShan Wei <davidshan@tencent.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The logic of the current code is that whenever we destroy
a cgroup that had its limit set (set meaning different than
maximum), we should decrement the jump_label counter.
Otherwise we assume it was never incremented.

But what the code actually does is test for RES_USAGE
instead of RES_LIMIT. Usage being different than maximum
is likely to be true most of the time.

The effect of this is that the key must become negative,
and since the jump_label test says:

        !!atomic_read(&key->enabled);

we'll have jump_labels still on when no one else is
using this functionality.
Signed-off-by: NGlauber Costa <glommer@parallels.com>
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit a9b3cd7f (rcu: convert uses of rcu_assign_pointer(x, NULL) to
RCU_INIT_POINTER) did a lot of incorrect changes, since it did a
complete conversion of rcu_assign_pointer(x, y) to RCU_INIT_POINTER(x,
y).

We miss needed barriers, even on x86, when y is not NULL.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 5b7c8406 ('ipv4: correct IGMP
behavior on v3 query during v2-compatibility mode') added yet another
case for query parsing, which can result in max_delay = 0.  Substitute
a value of 1, as in the usual v3 case.
Reported-by: NSimon McVittie <smcv@debian.org>
References: http://bugs.debian.org/654876Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to perform a proper universal hash on a vector of integers,
we have to use different universal hashes on each vector element.

Which means we need 4 different hash randoms for ipv6.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using /proc/net/nf_conntrack has been deprecated in favour of the
conntrack(8) tool.
Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Prepare the ECN match for augmentation by an IPv6 counterpart. Since
no symbol dependencies to ipv6.ko are added, having a single ecn match
module is the more so welcome.
Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The NAT range to nlattr conversation callbacks and helpers are entirely
dead code and are also useless since there are no NAT ranges in conntrack
context, they are only used for initially selecting a tuple. The final NAT
information is contained in the selected tuples of the conntrack entry.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The packet size check originates from a time when UDP helpers could
accidentally mangle incorrect packets (NEWNAT) and is unnecessary
nowadays since the conntrack helpers invoke the NAT helpers for the
proper packet directly.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The inner tuple that is extracted from the packet is unused. The code also
doesn't have any useful side-effects like verifying the packet does contain
enough data to extract the inner tuple since conntrack already does the
same, so remove it.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The only remaining user of NAT protocol module reference counting is NAT
ctnetlink support. Since this is a fairly short sequence of code, convert
over to use RCU and remove module reference counting.

Module unregistration is already protected by RCU using synchronize_rcu(),
so no further changes are necessary.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Use nf_conntrack_hash_rnd in NAT bysource hash to avoid hash chain attacks.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Export the NAT definitions to userspace. So far userspace (specifically,
iptables) has been copying the headers files from include/net. Also
rename some structures and definitions in preparation for IPv6 NAT.
Since these have never been officially exported, this doesn't affect
existing userspace code.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Chris Boot reported crashes occurring in ipv6_select_ident().

[  461.457562] RIP: 0010:[<ffffffff812dde61>]  [<ffffffff812dde61>]
ipv6_select_ident+0x31/0xa7

[  461.578229] Call Trace:
[  461.580742] <IRQ>
[  461.582870]  [<ffffffff812efa7f>] ? udp6_ufo_fragment+0x124/0x1a2
[  461.589054]  [<ffffffff812dbfe0>] ? ipv6_gso_segment+0xc0/0x155
[  461.595140]  [<ffffffff812700c6>] ? skb_gso_segment+0x208/0x28b
[  461.601198]  [<ffffffffa03f236b>] ? ipv6_confirm+0x146/0x15e
[nf_conntrack_ipv6]
[  461.608786]  [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[  461.614227]  [<ffffffff81271d64>] ? dev_hard_start_xmit+0x357/0x543
[  461.620659]  [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[  461.626440]  [<ffffffffa0379745>] ? br_parse_ip_options+0x19a/0x19a
[bridge]
[  461.633581]  [<ffffffff812722ff>] ? dev_queue_xmit+0x3af/0x459
[  461.639577]  [<ffffffffa03747d2>] ? br_dev_queue_push_xmit+0x72/0x76
[bridge]
[  461.646887]  [<ffffffffa03791e3>] ? br_nf_post_routing+0x17d/0x18f
[bridge]
[  461.653997]  [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[  461.659473]  [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[  461.665485]  [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[  461.671234]  [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[  461.677299]  [<ffffffffa0379215>] ?
nf_bridge_update_protocol+0x20/0x20 [bridge]
[  461.684891]  [<ffffffffa03bb0e5>] ? nf_ct_zone+0xa/0x17 [nf_conntrack]
[  461.691520]  [<ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[  461.697572]  [<ffffffffa0374812>] ? NF_HOOK.constprop.8+0x3c/0x56
[bridge]
[  461.704616]  [<ffffffffa0379031>] ?
nf_bridge_push_encap_header+0x1c/0x26 [bridge]
[  461.712329]  [<ffffffffa037929f>] ? br_nf_forward_finish+0x8a/0x95
[bridge]
[  461.719490]  [<ffffffffa037900a>] ?
nf_bridge_pull_encap_header+0x1c/0x27 [bridge]
[  461.727223]  [<ffffffffa0379974>] ? br_nf_forward_ip+0x1c0/0x1d4 [bridge]
[  461.734292]  [<ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[  461.739758]  [<ffffffffa03748cc>] ? __br_deliver+0xa0/0xa0 [bridge]
[  461.746203]  [<ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[  461.751950]  [<ffffffffa03748cc>] ? __br_deliver+0xa0/0xa0 [bridge]
[  461.758378]  [<ffffffffa037533a>] ? NF_HOOK.constprop.4+0x56/0x56
[bridge]

This is caused by bridge netfilter special dst_entry (fake_rtable), a
special shared entry, where attaching an inetpeer makes no sense.

Problem is present since commit 87c48fa3 (ipv6: make fragment
identifications less predictable)

Introduce DST_NOPEER dst flag and make sure ipv6_select_ident() and
__ip_select_ident() fallback to the 'no peer attached' handling.
Reported-by: NChris Boot <bootc@bootc.net>
Tested-by: NChris Boot <bootc@bootc.net>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Acked-by: NDavid Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 2c8cec5c (ipv4: Cache learned PMTU information in inetpeer)
removed IP route cache garbage collector a bit too soon, as this gc was
responsible for expired routes cleanup, releasing their neighbour
reference.

As pointed out by Robert Gladewitz, recent kernels can fill and exhaust
their neighbour cache.

Reintroduce the garbage collection, since we'll have to wait our
neighbour lookups become refcount-less to not depend on this stuff.
Reported-by: NRobert Gladewitz <gladewitz@gmx.de>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

to record the state of SACK/FACK and DSACK for better readability and maintenance.
Signed-off-by: NVijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

previous commit 3fb72f1e
makes IP-Config wait for carrier on at least one network device.

Before waiting (predefined value 120s), check that at least one device
was successfully brought up. Otherwise (e.g. buggy bootloader
which does not set the MAC address) there is no point in waiting
for carrier.

Cc: Micha Nelissen <micha@neli.hopto.org>
Cc: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: NGerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

(Thanks to Joe Perches for suggesting coccinelle for 0/1 -> true/false).

Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DaveM said:
   Please, this kind of stuff rots forever and not using bool properly
   drives me crazy.

Joe Perches <joe@perches.com> gave me the spatch script:

	@@
	bool b;
	@@
	-b = 0
	+b = false
	@@
	bool b;
	@@
	-b = 1
	+b = true

I merely installed coccinelle, read the documentation and took credit.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The sk address is used as a cookie between dump/get_exact calls.
It will be required for unix socket sdumping, so move it from
inet_diag to sock_diag.
Signed-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I've made a mistake when fixing the sock_/inet_diag aliases :(

1. The sock_diag layer should request the family-based alias,
   not just the IPPROTO_IP one;
2. The inet_diag layer should request for AF_INET+protocol alias,
   not just the protocol one.

Thus fix this.
Signed-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should only dereference the pointer if it's valid, not the other way
round.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/ipv4/sysctl_net_ipv4.c:78:6: warning: symbol 'inet_get_ping_group_range_table'
was not declared. Should it be static?

net/ipv4/sysctl_net_ipv4.c:119:31: warning: incorrect type in argument 2
(different signedness)
net/ipv4/sysctl_net_ipv4.c:119:31: expected int *range
net/ipv4/sysctl_net_ipv4.c:119:31: got unsigned int *<noident>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces kmem.tcp.max_usage_in_bytes file, living in the
kmem_cgroup filesystem. The root cgroup will display a value equal
to RESOURCE_MAX. This is to avoid introducing any locking schemes in
the network paths when cgroups are not being actively used.

All others, will see the maximum memory ever used by this cgroup.
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Reviewed-by: NHiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com>
CC: David S. Miller <davem@davemloft.net>
CC: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces kmem.tcp.failcnt file, living in the
kmem_cgroup filesystem. Following the pattern in the other
memcg resources, this files keeps a counter of how many times
allocation failed due to limits being hit in this cgroup.
The root cgroup will always show a failcnt of 0.
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Reviewed-by: NHiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com>
CC: David S. Miller <davem@davemloft.net>
CC: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces kmem.tcp.usage_in_bytes file, living in the
kmem_cgroup filesystem. It is a simple read-only file that displays the
amount of kernel memory currently consumed by the cgroup.
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Reviewed-by: NHiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com>
CC: David S. Miller <davem@davemloft.net>
CC: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch uses the "tcp.limit_in_bytes" field of the kmem_cgroup to
effectively control the amount of kernel memory pinned by a cgroup.

This value is ignored in the root cgroup, and in all others,
caps the value specified by the admin in the net namespaces'
view of tcp_sysctl_mem.

If namespaces are being used, the admin is allowed to set a
value bigger than cgroup's maximum, the same way it is allowed
to set pretty much unlimited values in a real box.
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Reviewed-by: NHiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com>
CC: David S. Miller <davem@davemloft.net>
CC: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows each namespace to independently set up
its levels for tcp memory pressure thresholds. This patch
alone does not buy much: we need to make this values
per group of process somehow. This is achieved in the
patches that follows in this patchset.
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
CC: David S. Miller <davem@davemloft.net>
CC: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces memory pressure controls for the tcp
protocol. It uses the generic socket memory pressure code
introduced in earlier patches, and fills in the
necessary data in cg_proto struct.
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch replaces all uses of struct sock fields' memory_pressure,
memory_allocated, sockets_allocated, and sysctl_mem to acessor
macros. Those macros can either receive a socket argument, or a mem_cgroup
argument, depending on the context they live in.

Since we're only doing a macro wrapping here, no performance impact at all is
expected in the case where we don't have cgroups disabled.
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Reviewed-by: NHiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com>
CC: David S. Miller <davem@davemloft.net>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Same fix as 731abb9c for ipip and sit tunnel.
Commit 1c5cae81 removed an explicit call to dev_alloc_name in
ipip_tunnel_locate and ipip6_tunnel_locate, because register_netdevice
will now create a valid name, however the tunnel keeps a copy of the
name in the private parms structure. Fix this by copying the name back
after register_netdevice has successfully returned.

This shows up if you do a simple tunnel add, followed by a tunnel show:

$ sudo ip tunnel add mode ipip remote 10.2.20.211
$ ip tunnel
tunl0: ip/ip  remote any  local any  ttl inherit  nopmtudisc
tunl%d: ip/ip  remote 10.2.20.211  local any  ttl inherit
$ sudo ip tunnel add mode sit remote 10.2.20.212
$ ip tunnel
sit0: ipv6/ip  remote any  local any  ttl 64  nopmtudisc 6rd-prefix 2002::/16
sit%d: ioctl 89f8 failed: No such device
sit%d: ipv6/ip  remote 10.2.20.212  local any  ttl inherit

Cc: stable@vger.kernel.org
Signed-off-by: NTed Feng <artisdom@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of testing defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>