1. 25 4月, 2016 1 次提交
    • E
      tcp-tso: do not split TSO packets at retransmit time · 10d3be56
      Eric Dumazet 提交于
      Linux TCP stack painfully segments all TSO/GSO packets before retransmits.
      
      This was fine back in the days when TSO/GSO were emerging, with their
      bugs, but we believe the dark age is over.
      
      Keeping big packets in write queues, but also in stack traversal
      has a lot of benefits.
       - Less memory overhead, because write queues have less skbs
       - Less cpu overhead at ACK processing.
       - Better SACK processing, as lot of studies mentioned how
         awful linux was at this ;)
       - Less cpu overhead to send the rtx packets
         (IP stack traversal, netfilter traversal, drivers...)
       - Better latencies in presence of losses.
       - Smaller spikes in fq like packet schedulers, as retransmits
         are not constrained by TCP Small Queues.
      
      1 % packet losses are common today, and at 100Gbit speeds, this
      translates to ~80,000 losses per second.
      Losses are often correlated, and we see many retransmit events
      leading to 1-MSS train of packets, at the time hosts are already
      under stress.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Acked-by: NYuchung Cheng <ycheng@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      10d3be56
  2. 22 4月, 2016 1 次提交
    • M
      tcp: Merge tx_flags and tskey in tcp_shifted_skb · cfea5a68
      Martin KaFai Lau 提交于
      After receiving sacks, tcp_shifted_skb() will collapse
      skbs if possible.  tx_flags and tskey also have to be
      merged.
      
      This patch reuses the tcp_skb_collapse_tstamp() to handle
      them.
      
      BPF Output Before:
      ~~~~~
      <no-output-due-to-missing-tstamp-event>
      
      BPF Output After:
      ~~~~~
      <...>-2024  [007] d.s.    88.644374: : ee_data:14599
      
      Packetdrill Script:
      ~~~~~
      +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10`
      +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1`
      +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
      +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
      +0 bind(3, ..., ...) = 0
      +0 listen(3, 1) = 0
      
      0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7>
      0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
      0.200 < . 1:1(0) ack 1 win 257
      0.200 accept(3, ..., ...) = 4
      +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0
      
      0.200 write(4, ..., 1460) = 1460
      +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0
      0.200 write(4, ..., 13140) = 13140
      
      0.200 > P. 1:1461(1460) ack 1
      0.200 > . 1461:8761(7300) ack 1
      0.200 > P. 8761:14601(5840) ack 1
      
      0.300 < . 1:1(0) ack 1 win 257 <sack 1461:14601,nop,nop>
      0.300 > P. 1:1461(1460) ack 1
      0.400 < . 1:1(0) ack 14601 win 257
      
      0.400 close(4) = 0
      0.400 > F. 14601:14601(0) ack 1
      0.500 < F. 1:1(0) ack 14602 win 257
      0.500 > . 14602:14602(0) ack 2
      Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
      Cc: Eric Dumazet <edumazet@google.com>
      Cc: Neal Cardwell <ncardwell@google.com>
      Cc: Soheil Hassas Yeganeh <soheil@google.com>
      Cc: Willem de Bruijn <willemb@google.com>
      Cc: Yuchung Cheng <ycheng@google.com>
      Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
      Tested-by: NSoheil Hassas Yeganeh <soheil@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cfea5a68
  3. 16 4月, 2016 1 次提交
    • E
      tcp: do not mess with listener sk_wmem_alloc · b3d05147
      Eric Dumazet 提交于
      When removing sk_refcnt manipulation on synflood, I missed that
      using skb_set_owner_w() was racy, if sk->sk_wmem_alloc had already
      transitioned to 0.
      
      We should hold sk_refcnt instead, but this is a big deal under attack.
      (Doing so increase performance from 3.2 Mpps to 3.8 Mpps only)
      
      In this patch, I chose to not attach a socket to syncookies skb.
      
      Performance is now 5 Mpps instead of 3.2 Mpps.
      
      Following patch will remove last known false sharing in
      tcp_rcv_state_process()
      
      Fixes: 3b24d854 ("tcp/dccp: do not touch listener sk_refcnt under synflood")
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b3d05147
  4. 05 4月, 2016 2 次提交
  5. 03 4月, 2016 1 次提交
    • Y
      tcp: remove cwnd moderation after recovery · 23492623
      Yuchung Cheng 提交于
      For non-SACK connections, cwnd is lowered to inflight plus 3 packets
      when the recovery ends. This is an optional feature in the NewReno
      RFC 2582 to reduce the potential burst when cwnd is "re-opened"
      after recovery and inflight is low.
      
      This feature is questionably effective because of PRR: when
      the recovery ends (i.e., snd_una == high_seq) NewReno holds the
      CA_Recovery state for another round trip to prevent false fast
      retransmits. But if the inflight is low, PRR will overwrite the
      moderated cwnd in tcp_cwnd_reduction() later regardlessly. So if a
      receiver responds bogus ACKs (i.e., acking future data) to speed up
      transfer after recovery, it can only induce a burst up to a window
      worth of data packets by acking up to SND.NXT. A restart from (short)
      idle or receiving streched ACKs can both cause such bursts as well.
      
      On the other hand, if the recovery ends because the sender
      detects the losses were spurious (e.g., reordering). This feature
      unconditionally lowers a reverted cwnd even though nothing
      was lost.
      
      By principle loss recovery module should not update cwnd. Further
      pacing is much more effective to reduce burst. Hence this patch
      removes the cwnd moderation feature.
      
      v2 changes: revised commit message on bogus ACKs and burst, and
                  missing signature
      Signed-off-by: NMatt Mathis <mattmathis@google.com>
      Signed-off-by: NNeal Cardwell <ncardwell@google.com>
      Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com>
      Signed-off-by: NYuchung Cheng <ycheng@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      23492623
  6. 15 3月, 2016 1 次提交
    • M
      tcp: Add RFC4898 tcpEStatsPerfDataSegsOut/In · a44d6eac
      Martin KaFai Lau 提交于
      Per RFC4898, they count segments sent/received
      containing a positive length data segment (that includes
      retransmission segments carrying data).  Unlike
      tcpi_segs_out/in, tcpi_data_segs_out/in excludes segments
      carrying no data (e.g. pure ack).
      
      The patch also updates the segs_in in tcp_fastopen_add_skb()
      so that segs_in >= data_segs_in property is kept.
      
      Together with retransmission data, tcpi_data_segs_out
      gives a better signal on the rxmit rate.
      
      v6: Rebase on the latest net-next
      
      v5: Eric pointed out that checking skb->len is still needed in
      tcp_fastopen_add_skb() because skb can carry a FIN without data.
      Hence, instead of open coding segs_in and data_segs_in, tcp_segs_in()
      helper is used.  Comment is added to the fastopen case to explain why
      segs_in has to be reset and tcp_segs_in() has to be called before
      __skb_pull().
      
      v4: Add comment to the changes in tcp_fastopen_add_skb()
      and also add remark on this case in the commit message.
      
      v3: Add const modifier to the skb parameter in tcp_segs_in()
      
      v2: Rework based on recent fix by Eric:
      commit a9d99ce2 ("tcp: fix tcpi_segs_in after connection establishment")
      Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
      Cc: Chris Rapier <rapier@psc.edu>
      Cc: Eric Dumazet <edumazet@google.com>
      Cc: Marcelo Ricardo Leitner <mleitner@redhat.com>
      Cc: Neal Cardwell <ncardwell@google.com>
      Cc: Yuchung Cheng <ycheng@google.com>
      Acked-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a44d6eac
  7. 10 3月, 2016 1 次提交
  8. 09 2月, 2016 1 次提交
  9. 08 2月, 2016 9 次提交
  10. 07 2月, 2016 1 次提交
    • E
      tcp: fastopen: call tcp_fin() if FIN present in SYNACK · e3e17b77
      Eric Dumazet 提交于
      When we acknowledge a FIN, it is not enough to ack the sequence number
      and queue the skb into receive queue. We also have to call tcp_fin()
      to properly update socket state and send proper poll() notifications.
      
      It seems we also had the problem if we received a SYN packet with the
      FIN flag set, but it does not seem an urgent issue, as no known
      implementation can do that.
      
      Fixes: 61d2bcae ("tcp: fastopen: accept data/FIN present in SYNACK message")
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Cc: Yuchung Cheng <ycheng@google.com>
      Cc: Neal Cardwell <ncardwell@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e3e17b77
  11. 06 2月, 2016 1 次提交
  12. 30 1月, 2016 1 次提交
  13. 27 1月, 2016 1 次提交
  14. 15 1月, 2016 2 次提交
    • J
      net: tcp_memcontrol: simplify linkage between socket and page counter · baac50bb
      Johannes Weiner 提交于
      There won't be any separate counters for socket memory consumed by
      protocols other than TCP in the future.  Remove the indirection and link
      sockets directly to their owning memory cgroup.
      Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
      Reviewed-by: NVladimir Davydov <vdavydov@virtuozzo.com>
      Acked-by: NDavid S. Miller <davem@davemloft.net>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      baac50bb
    • J
      net: tcp_memcontrol: sanitize tcp memory accounting callbacks · e805605c
      Johannes Weiner 提交于
      There won't be a tcp control soft limit, so integrating the memcg code
      into the global skmem limiting scheme complicates things unnecessarily.
      Replace this with simple and clear charge and uncharge calls--hidden
      behind a jump label--to account skb memory.
      
      Note that this is not purely aesthetic: as a result of shoehorning the
      per-memcg code into the same memory accounting functions that handle the
      global level, the old code would compare the per-memcg consumption
      against the smaller of the per-memcg limit and the global limit.  This
      allowed the total consumption of multiple sockets to exceed the global
      limit, as long as the individual sockets stayed within bounds.  After
      this change, the code will always compare the per-memcg consumption to
      the per-memcg limit, and the global consumption to the global limit, and
      thus close this loophole.
      
      Without a soft limit, the per-memcg memory pressure state in sockets is
      generally questionable.  However, we did it until now, so we continue to
      enter it when the hard limit is hit, and packets are dropped, to let
      other sockets in the cgroup know that they shouldn't grow their transmit
      windows, either.  However, keep it simple in the new callback model and
      leave memory pressure lazily when the next packet is accepted (as
      opposed to doing it synchroneously when packets are processed).  When
      packets are dropped, network performance will already be in the toilet,
      so that should be a reasonable trade-off.
      
      As described above, consumption is now checked on the per-memcg level
      and the global level separately.  Likewise, memory pressure states are
      maintained on both the per-memcg level and the global level, and a
      socket is considered under pressure when either level asserts as much.
      Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
      Reviewed-by: NVladimir Davydov <vdavydov@virtuozzo.com>
      Acked-by: NDavid S. Miller <davem@davemloft.net>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e805605c
  15. 11 1月, 2016 3 次提交
  16. 23 12月, 2015 1 次提交
  17. 16 12月, 2015 1 次提交
  18. 23 10月, 2015 1 次提交
    • E
      tcp/dccp: fix hashdance race for passive sessions · 5e0724d0
      Eric Dumazet 提交于
      Multiple cpus can process duplicates of incoming ACK messages
      matching a SYN_RECV request socket. This is a rare event under
      normal operations, but definitely can happen.
      
      Only one must win the race, otherwise corruption would occur.
      
      To fix this without adding new atomic ops, we use logic in
      inet_ehash_nolisten() to detect the request was present in the same
      ehash bucket where we try to insert the new child.
      
      If request socket was not found, we have to undo the child creation.
      
      This actually removes a spin_lock()/spin_unlock() pair in
      reqsk_queue_unlink() for the fast path.
      
      Fixes: e994b2f0 ("tcp: do not lock listener to process SYN packets")
      Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table")
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5e0724d0
  19. 21 10月, 2015 3 次提交
    • Y
      tcp: use RACK to detect losses · 4f41b1c5
      Yuchung Cheng 提交于
      This patch implements the second half of RACK that uses the the most
      recent transmit time among all delivered packets to detect losses.
      
      tcp_rack_mark_lost() is called upon receiving a dubious ACK.
      It then checks if an not-yet-sacked packet was sent at least
      "reo_wnd" prior to the sent time of the most recently delivered.
      If so the packet is deemed lost.
      
      The "reo_wnd" reordering window starts with 1msec for fast loss
      detection and changes to min-RTT/4 when reordering is observed.
      We found 1msec accommodates well on tiny degree of reordering
      (<3 pkts) on faster links. We use min-RTT instead of SRTT because
      reordering is more of a path property but SRTT can be inflated by
      self-inflicated congestion. The factor of 4 is borrowed from the
      delayed early retransmit and seems to work reasonably well.
      
      Since RACK is still experimental, it is now used as a supplemental
      loss detection on top of existing algorithms. It is only effective
      after the fast recovery starts or after the timeout occurs. The
      fast recovery is still triggered by FACK and/or dupack threshold
      instead of RACK.
      
      We introduce a new sysctl net.ipv4.tcp_recovery for future
      experiments of loss recoveries. For now RACK can be disabled by
      setting it to 0.
      Signed-off-by: NYuchung Cheng <ycheng@google.com>
      Signed-off-by: NNeal Cardwell <ncardwell@google.com>
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4f41b1c5
    • Y
      tcp: track the packet timings in RACK · 659a8ad5
      Yuchung Cheng 提交于
      This patch is the first half of the RACK loss recovery.
      
      RACK loss recovery uses the notion of time instead
      of packet sequence (FACK) or counts (dupthresh). It's inspired by the
      previous FACK heuristic in tcp_mark_lost_retrans(): when a limited
      transmit (new data packet) is sacked, then current retransmitted
      sequence below the newly sacked sequence must been lost,
      since at least one round trip time has elapsed.
      
      But it has several limitations:
      1) can't detect tail drops since it depends on limited transmit
      2) is disabled upon reordering (assumes no reordering)
      3) only enabled in fast recovery ut not timeout recovery
      
      RACK (Recently ACK) addresses these limitations with the notion
      of time instead: a packet P1 is lost if a later packet P2 is s/acked,
      as at least one round trip has passed.
      
      Since RACK cares about the time sequence instead of the data sequence
      of packets, it can detect tail drops when later retransmission is
      s/acked while FACK or dupthresh can't. For reordering RACK uses a
      dynamically adjusted reordering window ("reo_wnd") to reduce false
      positives on ever (small) degree of reordering.
      
      This patch implements tcp_advanced_rack() which tracks the
      most recent transmission time among the packets that have been
      delivered (ACKed or SACKed) in tp->rack.mstamp. This timestamp
      is the key to determine which packet has been lost.
      
      Consider an example that the sender sends six packets:
      T1: P1 (lost)
      T2: P2
      T3: P3
      T4: P4
      T100: sack of P2. rack.mstamp = T2
      T101: retransmit P1
      T102: sack of P2,P3,P4. rack.mstamp = T4
      T205: ACK of P4 since the hole is repaired. rack.mstamp = T101
      
      We need to be careful about spurious retransmission because it may
      falsely advance tp->rack.mstamp by an RTT or an RTO, causing RACK
      to falsely mark all packets lost, just like a spurious timeout.
      
      We identify spurious retransmission by the ACK's TS echo value.
      If TS option is not applicable but the retransmission is acknowledged
      less than min-RTT ago, it is likely to be spurious. We refrain from
      using the transmission time of these spurious retransmissions.
      
      The second half is implemented in the next patch that marks packet
      lost using RACK timestamp.
      Signed-off-by: NYuchung Cheng <ycheng@google.com>
      Signed-off-by: NNeal Cardwell <ncardwell@google.com>
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      659a8ad5
    • Y
      tcp: track min RTT using windowed min-filter · f6722583
      Yuchung Cheng 提交于
      Kathleen Nichols' algorithm for tracking the minimum RTT of a
      data stream over some measurement window. It uses constant space
      and constant time per update. Yet it almost always delivers
      the same minimum as an implementation that has to keep all
      the data in the window. The measurement window is tunable via
      sysctl.net.ipv4.tcp_min_rtt_wlen with a default value of 5 minutes.
      
      The algorithm keeps track of the best, 2nd best & 3rd best min
      values, maintaining an invariant that the measurement time of
      the n'th best >= n-1'th best. It also makes sure that the three
      values are widely separated in the time window since that bounds
      the worse case error when that data is monotonically increasing
      over the window.
      
      Upon getting a new min, we can forget everything earlier because
      it has no value - the new min is less than everything else in the
      window by definition and it's the most recent. So we restart fresh
      on every new min and overwrites the 2nd & 3rd choices. The same
      property holds for the 2nd & 3rd best.
      
      Therefore we have to maintain two invariants to maximize the
      information in the samples, one on values (1st.v <= 2nd.v <=
      3rd.v) and the other on times (now-win <=1st.t <= 2nd.t <= 3rd.t <=
      now). These invariants determine the structure of the code
      
      The RTT input to the windowed filter is the minimum RTT measured
      from ACK or SACK, or as the last resort from TCP timestamps.
      
      The accessor tcp_min_rtt() returns the minimum RTT seen in the
      window. ~0U indicates it is not available. The minimum is 1usec
      even if the true RTT is below that.
      Signed-off-by: NYuchung Cheng <ycheng@google.com>
      Signed-off-by: NNeal Cardwell <ncardwell@google.com>
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f6722583
  20. 19 10月, 2015 1 次提交
  21. 03 10月, 2015 3 次提交
    • E
      tcp: attach SYNACK messages to request sockets instead of listener · ca6fb065
      Eric Dumazet 提交于
      If a listen backlog is very big (to avoid syncookies), then
      the listener sk->sk_wmem_alloc is the main source of false
      sharing, as we need to touch it twice per SYNACK re-transmit
      and TX completion.
      
      (One SYN packet takes listener lock once, but up to 6 SYNACK
      are generated)
      
      By attaching the skb to the request socket, we remove this
      source of contention.
      
      Tested:
      
       listen(fd, 10485760); // single listener (no SO_REUSEPORT)
       16 RX/TX queue NIC
       Sustain a SYNFLOOD attack of ~320,000 SYN per second,
       Sending ~1,400,000 SYNACK per second.
       Perf profiles now show listener spinlock being next bottleneck.
      
          20.29%  [kernel]  [k] queued_spin_lock_slowpath
          10.06%  [kernel]  [k] __inet_lookup_established
           5.12%  [kernel]  [k] reqsk_timer_handler
           3.22%  [kernel]  [k] get_next_timer_interrupt
           3.00%  [kernel]  [k] tcp_make_synack
           2.77%  [kernel]  [k] ipt_do_table
           2.70%  [kernel]  [k] run_timer_softirq
           2.50%  [kernel]  [k] ip_finish_output
           2.04%  [kernel]  [k] cascade
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ca6fb065
    • E
      tcp/dccp: install syn_recv requests into ehash table · 079096f1
      Eric Dumazet 提交于
      In this patch, we insert request sockets into TCP/DCCP
      regular ehash table (where ESTABLISHED and TIMEWAIT sockets
      are) instead of using the per listener hash table.
      
      ACK packets find SYN_RECV pseudo sockets without having
      to find and lock the listener.
      
      In nominal conditions, this halves pressure on listener lock.
      
      Note that this will allow for SO_REUSEPORT refinements,
      so that we can select a listener using cpu/numa affinities instead
      of the prior 'consistent hash', since only SYN packets will
      apply this selection logic.
      
      We will shrink listen_sock in the following patch to ease
      code review.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Cc: Ying Cai <ycai@google.com>
      Cc: Willem de Bruijn <willemb@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      079096f1
    • E
      tcp: get_openreq[46]() changes · aa3a0c8c
      Eric Dumazet 提交于
      When request sockets are no longer in a per listener hash table
      but on regular TCP ehash, we need to access listener uid
      through req->rsk_listener
      
      get_openreq6() also gets a const for its request socket argument.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      aa3a0c8c
  22. 30 9月, 2015 3 次提交