- 22 5月, 2018 1 次提交
-
-
由 Bin Liu 提交于
The following members in struct musb_hdrc_config are not used, so remove them. soft_con utm_16 big_endian mult_bulk_tx mult_bulk_rx high_iso_tx high_iso_rx dma dma_channels dyn_fifo_size vendor_ctrl vendor_stat vendor_req dma_req_chan musb_hdrc_eps_bits Signed-off-by: NBin Liu <b-liu@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 21 5月, 2018 1 次提交
-
-
由 Joel Pepper 提交于
The composite framework allows us to create gadgets composed from many different functions, which need to fit into a single configuration descriptor. Some functions (like uvc) can produce configuration descriptors upwards of 2500 bytes on their own. This patch increases the limit from 1024 bytes to 4096. Signed-off-by: NJoel Pepper <joel.pepper@rwth-aachen.de> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
- 19 5月, 2018 1 次提交
-
-
由 Souptick Joarder 提交于
Many places in drivers/ file systems, error was handled in a common way like below: ret = (ret == -ENOMEM) ? VM_FAULT_OOM : VM_FAULT_SIGBUS; vmf_error() will replace this and return vm_fault_t type err. A lot of drivers and filesystems currently have a rather complex mapping of errno-to-VM_FAULT code. We have been able to eliminate a lot of it by just returning VM_FAULT codes directly from functions which are called exclusively from the fault handling path. Some functions can be called both from the fault handler and other context which are expecting an errno, so they have to continue to return an errno. Some users still need to choose different behaviour for different errnos, but vmf_error() captures the essential error translation that's common to all users, and those that need to handle additional errors can handle them first. Link: http://lkml.kernel.org/r/20180510174826.GA14268@jordon-HP-15-Notebook-PCSigned-off-by: NSouptick Joarder <jrdr.linux@gmail.com> Reviewed-by: NMatthew Wilcox <mawilcox@microsoft.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 5月, 2018 1 次提交
-
-
由 Willy Tarreau 提交于
proc_pid_cmdline_read() and environ_read() directly access the target process' VM to retrieve the command line and environment. If this process remaps these areas onto a file via mmap(), the requesting process may experience various issues such as extra delays if the underlying device is slow to respond. Let's simply refuse to access file-backed areas in these functions. For this we add a new FOLL_ANON gup flag that is passed to all calls to access_remote_vm(). The code already takes care of such failures (including unmapped areas). Accesses via /proc/pid/mem were not changed though. This was assigned CVE-2018-1120. Note for stable backports: the patch may apply to kernels prior to 4.11 but silently miss one location; it must be checked that no call to access_remote_vm() keeps zero as the last argument. Reported-by: NQualys Security Advisory <qsa@qualys.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: NWilly Tarreau <w@1wt.eu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 5月, 2018 1 次提交
-
-
由 Waiman Long 提交于
The filesystem freezing code needs to transfer ownership of a rwsem embedded in a percpu-rwsem from the task that does the freezing to another one that does the thawing by calling percpu_rwsem_release() after freezing and percpu_rwsem_acquire() before thawing. However, the new rwsem debug code runs afoul with this scheme by warning that the task that releases the rwsem isn't the one that acquires it, as reported by Amir Goldstein: DEBUG_LOCKS_WARN_ON(sem->owner != get_current()) WARNING: CPU: 1 PID: 1401 at /home/amir/build/src/linux/kernel/locking/rwsem.c:133 up_write+0x59/0x79 Call Trace: percpu_up_write+0x1f/0x28 thaw_super_locked+0xdf/0x120 do_vfs_ioctl+0x270/0x5f1 ksys_ioctl+0x52/0x71 __x64_sys_ioctl+0x16/0x19 do_syscall_64+0x5d/0x167 entry_SYSCALL_64_after_hwframe+0x49/0xbe To work properly with the rwsem debug code, we need to annotate that the rwsem ownership is unknown during the tranfer period until a brave soul comes forward to acquire the ownership. During that period, optimistic spinning will be disabled. Reported-by: NAmir Goldstein <amir73il@gmail.com> Tested-by: NAmir Goldstein <amir73il@gmail.com> Signed-off-by: NWaiman Long <longman@redhat.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jan Kara <jack@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Theodore Y. Ts'o <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-fsdevel@vger.kernel.org Link: http://lkml.kernel.org/r/1526420991-21213-3-git-send-email-longman@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 15 5月, 2018 5 次提交
-
-
由 Geert Uytterhoeven 提交于
The __DIVIDE() macro checks whether it is called with a 32-bit or 64-bit dividend, to select the appropriate divide-and-round-up routine. As the check uses the ternary operator, the result will always be promoted to a type that can hold both results, i.e. unsigned long long. When using this result in a division on a 32-bit system, this may lead to link errors like: ERROR: "__udivdi3" [drivers/mtd/nand/raw/nand.ko] undefined! Fix this by casting the result of the division to the type of the dividend. Fixes: 8878b126 ("mtd: nand: add ->exec_op() implementation") Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
-
由 Romain Izard 提交于
The include defines the private platform_data structure used with AVR platforms. It has no user since 7c55984e. Remove it. Acked-by: NLudovic Desroches <ludovic.desroches@microchip.com> Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: NRomain Izard <romain.izard.pro@gmail.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Dmitry Osipenko 提交于
UTMI pads are shared by USB controllers and reset of UTMI pads is shared with the reset of USB1 controller. Currently reset of UTMI pads is done by the EHCI driver and ChipIdea UDC works because EHCI driver always happen to be probed first. Move reset controls from ehci-tegra to tegra-phy in order to resolve the problem. Signed-off-by: NDmitry Osipenko <digetx@gmail.com> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Benjamin Herrenschmidt 提交于
The table is never modified by the function. This allows us to use it on a statically defined table that is marked const. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Steven Rostedt (VMware) 提交于
Doing an audit of trace events, I discovered two trace events in the xen subsystem that use a hack to create zero data size trace events. This is not what trace events are for. Trace events add memory footprint overhead, and if all you need to do is see if a function is hit or not, simply make that function noinline and use function tracer filtering. Worse yet, the hack used was: __array(char, x, 0) Which creates a static string of zero in length. There's assumptions about such constructs in ftrace that this is a dynamic string that is nul terminated. This is not the case with these tracepoints and can cause problems in various parts of ftrace. Nuke the trace events! Link: http://lkml.kernel.org/r/20180509144605.5a220327@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 95a7d768 ("xen/mmu: Use Xen specific TLB flush instead of the generic one.") Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
-
- 14 5月, 2018 3 次提交
-
-
由 David Howells 提交于
Add a tracepoint to record callbacks from servers for which we don't have a record. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Ben Hutchings 提交于
Commit 9e343e87 ("mtd: cfi: convert inline functions to macros") changed map_word_andequal() into a macro, but also changed the right hand side of the comparison from val3 to val2. Change it back to use val3 on the right hand side. Thankfully this did not cause a regression because all callers currently pass the same argument for val2 and val3. Fixes: 9e343e87 ("mtd: cfi: convert inline functions to macros") Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
-
由 Ard Biesheuvel 提交于
Mixed mode allows a kernel built for x86_64 to interact with 32-bit EFI firmware, but requires us to define all struct definitions carefully when it comes to pointer sizes. 'struct efi_pci_io_protocol_32' currently uses a 'void *' for the 'romimage' field, which will be interpreted as a 64-bit field on such kernels, potentially resulting in bogus memory references and subsequent crashes. Tested-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180504060003.19618-13-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 12 5月, 2018 2 次提交
-
-
Since commit c1adf200 ("Introduce rb_replace_node_rcu()") rbtree_augmented.h uses RCU related data structures but does not include the header file. It works as long as it gets somehow included before that and fails otherwise. Link: http://lkml.kernel.org/r/20180504103159.19938-1-bigeasy@linutronix.deSigned-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
Since exit_mmap() is done without the protection of mm->mmap_sem, it is possible for the oom reaper to concurrently operate on an mm until MMF_OOM_SKIP is set. This allows munlock_vma_pages_all() to concurrently run while the oom reaper is operating on a vma. Since munlock_vma_pages_range() depends on clearing VM_LOCKED from vm_flags before actually doing the munlock to determine if any other vmas are locking the same memory, the check for VM_LOCKED in the oom reaper is racy. This is especially noticeable on architectures such as powerpc where clearing a huge pmd requires serialize_against_pte_lookup(). If the pmd is zapped by the oom reaper during follow_page_mask() after the check for pmd_none() is bypassed, this ends up deferencing a NULL ptl or a kernel oops. Fix this by manually freeing all possible memory from the mm before doing the munlock and then setting MMF_OOM_SKIP. The oom reaper can not run on the mm anymore so the munlock is safe to do in exit_mmap(). It also matches the logic that the oom reaper currently uses for determining when to set MMF_OOM_SKIP itself, so there's no new risk of excessive oom killing. This issue fixes CVE-2018-1000200. Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1804241526320.238665@chino.kir.corp.google.com Fixes: 21292580 ("mm: oom: let oom_reap_task and exit_mmap run concurrently") Signed-off-by: NDavid Rientjes <rientjes@google.com> Suggested-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.14+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 5月, 2018 4 次提交
-
-
由 Debabrata Banerjee 提交于
There was a regression at some point from the intended functionality of commit f60c3704 ("bonding: Fix alb mode to only use first level vlans.") Given the return value vlan_get_encap_level() we need to store the nest level of the bond device, and then compare the vlan's encap level to this. Without this, this check always fails and learning packets are never sent. In addition, this same commit caused a regression in the behavior of balance_alb, which requires learning packets be sent for all interfaces using the slave's mac in order to load balance properly. For vlan's that have not set a user mac, we can send after checking one bit. Otherwise we need send the set mac, albeit defeating rx load balancing for that vlan. Signed-off-by: NDebabrata Banerjee <dbanerje@akamai.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wanpeng Li 提交于
Our virtual machines make use of device assignment by configuring 12 NVMe disks for high I/O performance. Each NVMe device has 129 MSI-X Table entries: Capabilities: [50] MSI-X: Enable+ Count=129 Masked-Vector table: BAR=0 offset=00002000 The windows virtual machines fail to boot since they will map the number of MSI-table entries that the NVMe hardware reported to the bus to msi routing table, this will exceed the 1024. This patch extends MAX_IRQ_ROUTES to 4096 for all archs, in the future this might be extended again if needed. Reviewed-by: NCornelia Huck <cohuck@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim KrÄmář <rkrcmar@redhat.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NWanpeng Li <wanpengli@tencent.com> Signed-off-by: NTonny Lu <tonnylu@tencent.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 David Howells 提交于
Add a tracepoint to log transmission failure from the UDP transport socket being used by AF_RXRPC. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Add a tracepoint to log received ICMP/ICMP6 events and other error messages. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
- 10 5月, 2018 1 次提交
-
-
由 Ilya Dryomov 提交于
... and store num_bvecs for client code's convenience. Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
-
- 08 5月, 2018 1 次提交
-
-
由 Wolfram Sang 提交于
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 5月, 2018 1 次提交
-
-
由 Randy Dunlap 提交于
Fix 88 instances of a kernel-doc warning: ../include/net/mac80211.h:2083: warning: bad line: > Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: linux-wireless@vger.kernel.org Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 05 5月, 2018 1 次提交
-
-
由 Bhadram Varka 提交于
It adds support for BCM89610 (Single-Port 10/100/1000BASE-T) transceiver which is used in P3310 Tegra186 platform. Signed-off-by: NBhadram Varka <vbhadram@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 5月, 2018 2 次提交
-
-
由 Mauro Carvalho Chehab 提交于
From now on, I'll start using my @kernel.org as my development e-mail. As such, let's remove the entries that point to the old mchehab@s-opensource.com at MAINTAINERS file. For the files written with a copyright with mchehab@s-opensource, let's keep Samsung on their names, using mchehab+samsung@kernel.org, in order to keep pointing to my employer, with sponsors the work. For the files written before I join Samsung (on July, 4 2013), let's just use mchehab@kernel.org. For bug reports, we can simply point to just kernel.org, as this will reach my mchehab+samsung inbox anyway. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NBrian Warner <brian.warner@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Peter Zijlstra 提交于
Gaurav reported a perceived problem with TASK_PARKED, which turned out to be a broken wait-loop pattern in __kthread_parkme(), but the reported issue can (and does) in fact happen for states that do not do condition based sleeps. When the 'current->state = TASK_RUNNING' store of a previous (concurrent) try_to_wake_up() collides with the setting of a 'special' sleep state, we can loose the sleep state. Normal condition based wait-loops are immune to this problem, but for sleep states that are not condition based are subject to this problem. There already is a fix for TASK_DEAD. Abstract that and also apply it to TASK_STOPPED and TASK_TRACED, both of which are also without condition based wait-loop. Reported-by: NGaurav Kohli <gkohli@codeaurora.org> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: NOleg Nesterov <oleg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 03 5月, 2018 3 次提交
-
-
由 Tetsuo Handa 提交于
syzbot is reporting hung tasks at wait_on_bit(WB_shutting_down) in wb_shutdown() [1]. This seems to be because commit 5318ce7d ("bdi: Shutdown writeback on all cgwbs in cgwb_bdi_destroy()") forgot to call wake_up_bit(WB_shutting_down) after clear_bit(WB_shutting_down). Introduce a helper function clear_and_wake_up_bit() and use it, in order to avoid similar errors in future. [1] https://syzkaller.appspot.com/bug?id=b297474817af98d5796bc544e1bb806fc3da0e5eSigned-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: Nsyzbot <syzbot+c0cf869505e03bdf1a24@syzkaller.appspotmail.com> Fixes: 5318ce7d ("bdi: Shutdown writeback on all cgwbs in cgwb_bdi_destroy()") Cc: Tejun Heo <tj@kernel.org> Reviewed-by: NJan Kara <jack@suse.cz> Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Peter Zijlstra 提交于
Even with the wait-loop fixed, there is a further issue with kthread_parkme(). Upon hotplug, when we do takedown_cpu(), smpboot_park_threads() can return before all those threads are in fact blocked, due to the placement of the complete() in __kthread_parkme(). When that happens, sched_cpu_dying() -> migrate_tasks() can end up migrating such a still runnable task onto another CPU. Normally the task will have hit schedule() and gone to sleep by the time we do kthread_unpark(), which will then do __kthread_bind() to re-bind the task to the correct CPU. However, when we loose the initial TASK_PARKED store to the concurrent wakeup issue described previously, do the complete(), get migrated, it is possible to either: - observe kthread_unpark()'s clearing of SHOULD_PARK and terminate the park and set TASK_RUNNING, or - __kthread_bind()'s wait_task_inactive() to observe the competing TASK_RUNNING store. Either way the WARN() in __kthread_bind() will trigger and fail to correctly set the CPU affinity. Fix this by only issuing the complete() when the kthread has scheduled out. This does away with all the icky 'still running' nonsense. The alternative is to promote TASK_PARKED to a special state, this guarantees wait_task_inactive() cannot observe a 'stale' TASK_RUNNING and we'll end up doing the right thing, but this preserves the whole icky business of potentially migating the still runnable thing. Reported-by: NGaurav Kohli <gkohli@codeaurora.org> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ido Schimmel 提交于
This reverts commit edd7ceb7 ("ipv6: Allow non-gateway ECMP for IPv6"). Eric reported a division by zero in rt6_multipath_rebalance() which is caused by above commit that considers identical local routes to be siblings. The division by zero happens because a nexthop weight is not set for local routes. Revert the commit as it does not fix a bug and has side effects. To reproduce: # ip -6 address add 2001:db8::1/64 dev dummy0 # ip -6 address add 2001:db8::1/64 dev dummy1 Fixes: edd7ceb7 ("ipv6: Allow non-gateway ECMP for IPv6") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Tested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 5月, 2018 5 次提交
-
-
由 Michael S. Tsirkin 提交于
This reverts commit 93c0d549c4c5a7382ad70de6b86610b7aae57406. Unfortunately the padding will break 32 bit userspace. Ouch. Need to add some compat code, revert for now. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Watson 提交于
It is reported that in some cases, write_space may be called in do_tcp_sendpages, such that we recursively invoke do_tcp_sendpages again: [ 660.468802] ? do_tcp_sendpages+0x8d/0x580 [ 660.468826] ? tls_push_sg+0x74/0x130 [tls] [ 660.468852] ? tls_push_record+0x24a/0x390 [tls] [ 660.468880] ? tls_write_space+0x6a/0x80 [tls] ... tls_push_sg already does a loop over all sending sg's, so ignore any tls_write_space notifications until we are done sending. We then have to call the previous write_space to wake up poll() waiters after we are done with the send loop. Reported-by: NAndre Tomt <andre@tomt.net> Signed-off-by: NDave Watson <davejwatson@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Winter 提交于
It is valid to have static routes where the nexthop is an interface not an address such as tunnels. For IPv4 it was possible to use ECMP on these routes but not for IPv6. Signed-off-by: NThomas Winter <Thomas.Winter@alliedtelesis.co.nz> Cc: David Ahern <dsahern@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Acked-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
There's a 32 bit hole just after type. It's best to give it a name, this way compiler is forced to initialize it with rest of the structure. Reported-by: NKevin Easton <kevin@guarana.org> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chuck Lever 提交于
If the rpc_task survived longer than the transport, task->tk_xprt points to freed memory by the time rpc_count_iostats_metrics runs. Replace the references to task->tk_xprt with references to the task's tk_client. Reported-by: syzbot+27db1f90e2b972a5f2d3@syzkaller.appspotmail.com Fixes: 40bf7eb3 ('sunrpc: Add static trace point to report ...') Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 29 4月, 2018 1 次提交
-
-
由 Amir Goldstein 提交于
The comment claims that this helper will try not to loose bits, but for 64bit long it looses the high bits before hashing 64bit long into 32bit int. Use the helper hash_long() to do the right thing for 64bit long. For 32bit long, there is no change. All the callers of end_name_hash() either assign the result to qstr->hash, which is u32 or return the result as an int value (e.g. full_name_hash()). Change the helper return type to int to conform to its users. [ It took me a while to apply this, because my initial reaction to it was - incorrectly - that it could make for slower code. After having looked more at it, I take back all my complaints about the patch, Amir was right and I was mis-reading things or just being stupid. I also don't worry too much about the possible performance impact of this on 64-bit, since most architectures that actually care about performance end up not using this very much (the dcache code is the most performance-critical, but the word-at-a-time case uses its own hashing anyway). So this ends up being mostly used for filesystems that do their own degraded hashing (usually because they want a case-insensitive comparison function). A _tiny_ worry remains, in that not everybody uses DCACHE_WORD_ACCESS, and then this potentially makes things more expensive on 64-bit architectures with slow or lacking multipliers even for the normal case. That said, realistically the only such architecture I can think of is PA-RISC. Nobody really cares about performance on that, it's more of a "look ma, I've got warts^W an odd machine" platform. So the patch is fine, and all my initial worries were just misplaced from not looking at this properly. - Linus ] Signed-off-by: NAmir Goldstein <amir73il@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 4月, 2018 1 次提交
-
-
由 KarimAllah Ahmed 提交于
Move DISABLE_EXITS KVM capability bits to the UAPI just like the rest of capabilities. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NKarimAllah Ahmed <karahmed@amazon.de> Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
-
- 27 4月, 2018 4 次提交
-
-
由 Marc Zyngier 提交于
Now that we make sure we don't inject multiple instances of the same GICv2 SGI at the same time, we've made another bug more obvious: If we exit with an active SGI, we completely lose track of which vcpu it came from. On the next entry, we restore it with 0 as a source, and if that wasn't the right one, too bad. While this doesn't seem to trouble GIC-400, the architectural model gets offended and doesn't deactivate the interrupt on EOI. Another connected issue is that we will happilly make pending an interrupt from another vcpu, overriding the above zero with something that is just as inconsistent. Don't do that. The final issue is that we signal a maintenance interrupt when no pending interrupts are present in the LR. Assuming we've fixed the two issues above, we end-up in a situation where we keep exiting as soon as we've reached the active state, and not be able to inject the following pending. The fix comes in 3 parts: - GICv2 SGIs have their source vcpu saved if they are active on exit, and restored on entry - Multi-SGIs cannot go via the Pending+Active state, as this would corrupt the source field - Multi-SGIs are converted to using MI on EOI instead of NPIE Fixes: 16ca6a60 ("KVM: arm/arm64: vgic: Don't populate multiple LRs with the same vintid") Reported-by: NMark Rutland <mark.rutland@arm.com> Tested-by: NMark Rutland <mark.rutland@arm.com> Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Joel Pepper 提交于
The composite framework allows us to create gadgets composed from many different functions, which need to fit into a single configuration descriptor. Some functions (like uvc) can produce configuration descriptors upwards of 2500 bytes on their own. This patch increases the limit from 1024 bytes to 4096. Signed-off-by: NJoel Pepper <joel.pepper@rwth-aachen.de> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Israel Rukshin 提交于
Adding the vector offset when calling to mlx5_vector2eqn() is wrong. This is because mlx5_vector2eqn() checks if EQ index is equal to vector number and the fact that the internal completion vectors that mlx5 allocates don't get an EQ index. The second problem here is that using effective_affinity_mask gives the same CPU for different vectors. This leads to unmapped queues when calling it from blk_mq_rdma_map_queues(). This doesn't happen when using affinity_hint mask. Fixes: 2572cf57 ("mlx5: fix mlx5_get_vector_affinity to start from completion vector 0") Fixes: 05e0cc84 ("net/mlx5: Fix get vector affinity helper function") Signed-off-by: NIsrael Rukshin <israelr@mellanox.com> Reviewed-by: NMax Gurtovoy <maxg@mellanox.com> Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
-
由 Rishabh Bhatnagar 提交于
Using initcall_t in the __field macro generates the following warning with clang version 6.0: include/trace/events/initcall.h:34:3: warning: ordered comparison of function pointers ('initcall_t' (aka 'int (*)(void)') and 'initcall_t') __field macro expands to __field_ext macro which does is_signed_type check on the type argument. Since initcall_t is defined as a function pointer, using it as the type in the __field macro, leads to an ordered comparison of function pointer warning, inside the check. Using __field_struct macro avoids the issue. Link: http://lkml.kernel.org/r/1524699755-29388-1-git-send-email-rishabhb@codeaurora.orgSigned-off-by: NRishabh Bhatnagar <rishabhb@codeaurora.org> [ Added comment to why we are using field_struct() ] Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
-
- 26 4月, 2018 1 次提交
-
-
由 Omar Sandoval 提交于
When the blk-mq inflight implementation was added, /proc/diskstats was converted to use it, but /sys/block/$dev/inflight was not. Fix it by adding another helper to count in-flight requests by data direction. Fixes: f299b7c7 ("blk-mq: provide internal in-flight variant") Signed-off-by: NOmar Sandoval <osandov@fb.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-