This will pave the way for each apic driver to be self-contained
and eliminate the need for apic_probe[].

Order in which apic drivers are listed in the .apicdrivers
section is important, as this determines the apic probe order.
And this is enforced by the ordering of apic driver files in the
Makefile and the macros apic_driver()/apic_drivers().
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Tested-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: steiner@sgi.com
Cc: gorcunov@openvz.org
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110521005526.068775085@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

To eliminate code duplication.
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.591426753@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

In the case of x2apic cluster mode we can group IPI register
writes based on the cluster group instead of individual per-cpu
destination messages.

This reduces the apic register writes and reduces the amount of
IPI messages (in the best case we can reduce it by a factor of
16).

With this change, the cost of flush_tlb_others(), with the flush
tlb IPI being sent from a cpu in the socket-1 to all the logical
cpus in socket-2 (on a Westmere-EX system that has 20 logical
cpus in a socket) is 3x times better now (compared to the former
'send one-by-one' algorithm).
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.512271057@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

In the case of x2apic cluster mode, we can group IPI register
writes based on the cluster group instead of individual per-cpu
destination messages.

For this purpose, track the cpu's that belong to the same x2apic
cluster.
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.421800999@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.337024125@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Use the unused probe routine in the apic driver to finalize the
apic model selection. This cleans up the
default_setup_apic_routing() and this probe routine in future
can also be used for doing any apic model specific
initialisation.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.247458931@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: daniel.blueman@gmail.com
Link: http://lkml.kernel.org/r/20110518233158.089978277@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: daniel.blueman@gmail.com
Link: http://lkml.kernel.org/r/20110518233157.994002011@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: daniel.blueman@gmail.com
Link: http://lkml.kernel.org/r/20110518233157.909013179@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: daniel.blueman@gmail.com
Link: http://lkml.kernel.org/r/20110518233157.830697056@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Introduce struct ioapic with nr_registers field.

This will pave way for consolidating different MAX_IO_APICS
arrays into it.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: daniel.blueman@gmail.com
Link: http://lkml.kernel.org/r/20110518233157.744315519@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Code flow for enabling interrupt-remapping has its own routines
for saving and restoring io-apic RTE's. ioapic suspend/resume
code flow also has similar routines. Remove the duplicate code.
Tested-by: NDaniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/20110518233157.673130611@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Code flow for enabling interrupt-remapping was
allocating/freeing buffers for saving/restoring io-apic RTE's.
ioapic suspend/resume code uses boot time allocated
ioapic_saved_data that is a perfect match for reuse here.

This will remove the unnecessary allocation/free of the
temporary buffers during suspend/resume of interrupt-remapping
enabled platforms aswell as paving the way for further code
consolidation.
Tested-by: NDaniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/20110518233157.574469296@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

This allows re-using this buffer for enabling
interrupt-remapping during boot and resume. And thus allow for
consolidating the code between ioapic suspend/resume and
interrupt-remapping.
Tested-by: NDaniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/20110518233157.481404505@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Fix a potential deadlock when resuming; here the calling
function has disabled interrupts, so we cannot sleep.

Change the memory allocation flag from GFP_KERNEL to GFP_ATOMIC.

TODO: We can do away with this memory allocation during resume
      by reusing the ioapic suspend/resume code that uses boot time
      allocated buffers, but we want to keep this -stable patch
      simple.
Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: <stable@kernel.org> # v2.6.38/39
Link: http://lkml.kernel.org/r/20110518233157.385970138@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

There is no point in counting hits - we can calculate it from the number
of lookups and misses.

This makes the avc statistics a bit smaller, and makes the code
generation better too.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

You can turn off the avc cache stats, but distributions seem to not do
that (perhaps because several performance tuning how-to's talk about the
avc cache statistics).

Which is sad, because the code it generates is truly horrendous, with
the statistics update being sandwitched between get_cpu/put_cpu which in
turn causes preemption disables etc.  We're talking ten+ instructions
just to increment a per-cpu variable in some pretty hot code.

Fix the craziness by just using 'this_cpu_inc()' instead.  Suddenly we
only need a single 'inc' instruction to increment the statistics.  This
is quite noticeable in the incredibly hot avc_has_perm_noaudit()
function (which triggers all the statistics by virtue of doing an
avc_lookup() call).
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6

* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (44 commits)
  debugfs: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warning
  sysfs: remove "last sysfs file:" line from the oops messages
  drivers/base/memory.c: fix warning due to "memory hotplug: Speed up add/remove when blocks are larger than PAGES_PER_SECTION"
  memory hotplug: Speed up add/remove when blocks are larger than PAGES_PER_SECTION
  SYSFS: Fix erroneous comments for sysfs_update_group().
  driver core: remove the driver-model structures from the documentation
  driver core: Add the device driver-model structures to kerneldoc
  Translated Documentation/email-clients.txt
  RAW driver: Remove call to kobject_put().
  reboot: disable usermodehelper to prevent fs access
  efivars: prevent oops on unload when efi is not enabled
  Allow setting of number of raw devices as a module parameter
  Introduce CONFIG_GOOGLE_FIRMWARE
  driver: Google Memory Console
  driver: Google EFI SMI
  x86: Better comments for get_bios_ebda()
  x86: get_bios_ebda_length()
  misc: fix ti-st build issues
  params.c: Use new strtobool function to process boolean inputs
  debugfs: move to new strtobool
  ...

Fix up trivial conflicts in fs/debugfs/file.c due to the same patch
being applied twice, and an unrelated cleanup nearby.

This fixes these build errors on powerpc:

  In file included from arch/powerpc/mm/fault.c:18:
  include/linux/signal.h:239: error: 'struct task_struct' declared inside parameter list
  include/linux/signal.h:239: error: its scope is only this definition or declaration, which is probably not what you want
  include/linux/signal.h:240: error: 'struct task_struct' declared inside parameter list
  ..

Exposed by commit e66eed65 ("list: remove prefetching from regular
list iterators"), which removed the include of <linux/prefetch.h> from
<linux/list.h>.

Without that, linux/signal.h no longer accidentally got the declaration
of 'struct task_struct'.

Fix by properly declaring the struct, rather than introducing any new
header file dependency.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (78 commits)
  Revert "rcu: Decrease memory-barrier usage based on semi-formal proof"
  net,rcu: convert call_rcu(prl_entry_destroy_rcu) to kfree
  batman,rcu: convert call_rcu(softif_neigh_free_rcu) to kfree_rcu
  batman,rcu: convert call_rcu(neigh_node_free_rcu) to kfree()
  batman,rcu: convert call_rcu(gw_node_free_rcu) to kfree_rcu
  net,rcu: convert call_rcu(kfree_tid_tx) to kfree_rcu()
  net,rcu: convert call_rcu(xt_osf_finger_free_rcu) to kfree_rcu()
  net/mac80211,rcu: convert call_rcu(work_free_rcu) to kfree_rcu()
  net,rcu: convert call_rcu(wq_free_rcu) to kfree_rcu()
  net,rcu: convert call_rcu(phonet_device_rcu_free) to kfree_rcu()
  perf,rcu: convert call_rcu(swevent_hlist_release_rcu) to kfree_rcu()
  perf,rcu: convert call_rcu(free_ctx) to kfree_rcu()
  net,rcu: convert call_rcu(__nf_ct_ext_free_rcu) to kfree_rcu()
  net,rcu: convert call_rcu(net_generic_release) to kfree_rcu()
  net,rcu: convert call_rcu(netlbl_unlhsh_free_addr6) to kfree_rcu()
  net,rcu: convert call_rcu(netlbl_unlhsh_free_addr4) to kfree_rcu()
  security,rcu: convert call_rcu(sel_netif_free) to kfree_rcu()
  net,rcu: convert call_rcu(xps_dev_maps_release) to kfree_rcu()
  net,rcu: convert call_rcu(xps_map_release) to kfree_rcu()
  net,rcu: convert call_rcu(rps_map_release) to kfree_rcu()
  ...

Merge branch 'x86-smep-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-smep-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, cpu: Enable/disable Supervisor Mode Execution Protection
  x86, cpu: Add SMEP CPU feature in CR4
  x86, cpufeature: Add cpufeature flag for SMEP

Merge branches 'x86-reboot-for-linus' and 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-reboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Reorder reboot method preferences

* 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, setup: Fix EDD3.0 data verification.

Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Introduce pci_map_biosrom()
  x86, olpc: Use device tree for platform identification

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits)
  x86, mm: Allow ZONE_DMA to be configurable
  x86, NUMA: Trim numa meminfo with max_pfn in a separate loop
  x86, NUMA: Rename setup_node_bootmem() to setup_node_data()
  x86, NUMA: Enable emulation on 32bit too
  x86, NUMA: Enable CONFIG_AMD_NUMA on 32bit too
  x86, NUMA: Rename amdtopology_64.c to amdtopology.c
  x86, NUMA: Make numa_init_array() static
  x86, NUMA: Make 32bit use common NUMA init path
  x86, NUMA: Initialize and use remap allocator from setup_node_bootmem()
  x86-32, NUMA: Add @start and @end to init_alloc_remap()
  x86, NUMA: Remove long 64bit assumption from numa.c
  x86, NUMA: Enable build of generic NUMA init code on 32bit
  x86, NUMA: Move NUMA init logic from numa_64.c to numa.c
  x86-32, NUMA: Update numaq to use new NUMA init protocol
  x86-32, NUMA: Replace srat_32.c with srat.c
  x86-32, NUMA: implement temporary NUMA init shims
  x86, NUMA: Move numa_nodes_parsed to numa.[hc]
  x86-32, NUMA: Move get_memcfg_numa() into numa_32.c
  x86, NUMA: make srat.c 32bit safe
  x86, NUMA: rename srat_64.c to srat.c
  ...

Merge branches 'x86-efi-for-linus', 'x86-gart-for-linus', 'x86-irq-for-linus' and 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, efi: Ensure that the entirity of a region is mapped
  x86, efi: Pass a minimal map to SetVirtualAddressMap()
  x86, efi: Merge contiguous memory regions of the same type and attribute
  x86, efi: Consolidate EFI nx control
  x86, efi: Remove virtual-mode SetVirtualAddressMap call

* 'x86-gart-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, gart: Don't enforce GART aperture lower-bound by alignment

* 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Don't unmask disabled irqs when migrating them
  x86: Skip migrating IRQF_PER_CPU irqs in fixup_irqs()

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mce: Drop the default decoding notifier
  x86, MCE: Do not taint when handling correctable errors

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, cpu: Fix detection of Celeron Covington stepping A1 and B0
  Documentation, ABI: Update L3 cache index disable text
  x86, AMD, cacheinfo: Fix L3 cache index disable checks
  x86, AMD, cacheinfo: Fix fallout caused by max3 conversion
  x86, cpu: Change NOP selection for certain Intel CPUs
  x86, cpu: Clean up and unify the NOP selection infrastructure
  x86, percpu: Use ASM_NOP4 instead of hardcoding P6_NOP4
  x86, cpu: Move AMD Elan Kconfig under "Processor family"

Fix up trivial conflicts in alternative handling (commit dc326fca
"x86, cpu: Clean up and unify the NOP selection infrastructure" removed
some hacky 5-byte instruction stuff, while commit d430d3d7 "jump
label: Introduce static_branch() interface" renamed HAVE_JUMP_LABEL to
CONFIG_JUMP_LABEL in the code that went away)

Merge branches 'x86-apic-for-linus', 'x86-asm-for-linus' and 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, apic: Print verbose error interrupt reason on apic=debug

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Demacro CONFIG_PARAVIRT cpu accessors

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix mrst sparse complaints
  x86: Fix spelling error in the memcpy() source code comment
  x86, mpparse: Remove unnecessary variable

Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimer: Make lookup table const
  RTC: Disable CONFIG_RTC_CLASS from being built as a module
  timers: Fix alarmtimer build issues when CONFIG_RTC_CLASS=n
  timers: Remove delayed irqwork from alarmtimers implementation
  timers: Improve alarmtimer comments and minor fixes
  timers: Posix interface for alarm-timers
  timers: Introduce in-kernel alarm-timer interface
  timers: Add rb_init_node() to allow for stack allocated rb nodes
  time: Add timekeeping_inject_sleeptime

Merge branch 'timers-clockevents-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-clockevents-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: hpet: Cleanup the clockevents init and register code
  x86: Convert PIT to clockevents_config_and_register()
  clockevents: Provide interface to reconfigure an active clock event device
  clockevents: Provide combined configure and register function
  clockevents: Restructure clock_event_device members
  clocksource: Get rid of the hardcoded 5 seconds sleep time limit
  clocksource: Restructure clocksource struct members

Merge branch 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clocksource: convert mips to generic i8253 clocksource
  clocksource: convert x86 to generic i8253 clocksource
  clocksource: convert footbridge to generic i8253 clocksource
  clocksource: add common i8253 PIT clocksource
  blackfin: convert to clocksource_register_hz
  mips: convert to clocksource_register_hz/khz
  sparc: convert to clocksource_register_hz/khz
  alpha: convert to clocksource_register_hz
  microblaze: convert to clocksource_register_hz/khz
  ia64: convert to clocksource_register_hz/khz
  x86: Convert remaining x86 clocksources to clocksource_register_hz/khz
  Make clocksource name const

Merge branches 'sched-core-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits)
  sched: Fix and optimise calculation of the weight-inverse
  sched: Avoid going ahead if ->cpus_allowed is not changed
  sched, rt: Update rq clock when unthrottling of an otherwise idle CPU
  sched: Remove unused parameters from sched_fork() and wake_up_new_task()
  sched: Shorten the construction of the span cpu mask of sched domain
  sched: Wrap the 'cfs_rq->nr_spread_over' field with CONFIG_SCHED_DEBUG
  sched: Remove unused 'this_best_prio arg' from balance_tasks()
  sched: Remove noop in alloc_rt_sched_group()
  sched: Get rid of lock_depth
  sched: Remove obsolete comment from scheduler_tick()
  sched: Fix sched_domain iterations vs. RCU
  sched: Next buddy hint on sleep and preempt path
  sched: Make set_*_buddy() work on non-task entities
  sched: Remove need_migrate_task()
  sched: Move the second half of ttwu() to the remote cpu
  sched: Restructure ttwu() some more
  sched: Rename ttwu_post_activation() to ttwu_do_wakeup()
  sched: Remove rq argument from ttwu_stat()
  sched: Remove rq->lock from the first half of ttwu()
  sched: Drop rq->lock from sched_exec()
  ...

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix rt_rq runtime leakage bug

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (107 commits)
  perf stat: Add more cache-miss percentage printouts
  perf stat: Add -d -d and -d -d -d options to show more CPU events
  ftrace/kbuild: Add recordmcount files to force full build
  ftrace: Add self-tests for multiple function trace users
  ftrace: Modify ftrace_set_filter/notrace to take ops
  ftrace: Allow dynamically allocated function tracers
  ftrace: Implement separate user function filtering
  ftrace: Free hash with call_rcu_sched()
  ftrace: Have global_ops store the functions that are to be traced
  ftrace: Add ops parameter to ftrace_startup/shutdown functions
  ftrace: Add enabled_functions file
  ftrace: Use counters to enable functions to trace
  ftrace: Separate hash allocation and assignment
  ftrace: Create a global_ops to hold the filter and notrace hashes
  ftrace: Use hash instead for FTRACE_FL_FILTER
  ftrace: Replace FTRACE_FL_NOTRACE flag with a hash of ignored functions
  perf bench, x86: Add alternatives-asm.h wrapper
  x86, 64-bit: Fix copy_[to/from]_user() checks for the userspace address limit
  x86, mem: memset_64.S: Optimize memset by enhanced REP MOVSB/STOSB
  x86, mem: memmove_64.S: Optimize memmove by enhanced REP MOVSB/STOSB
  ...

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  irq: Export functions to allow modular irq drivers
  genirq: Uninline and sanity check generic_handle_irq()
  genirq: Remove pointless ifdefs
  genirq: Make generic irq chip depend on CONFIG_GENERIC_IRQ_CHIP
  genirq: Add chip suspend and resume callbacks
  genirq: Implement a generic interrupt chip
  genirq: Support per-IRQ thread disabling.
  genirq: irq_desc: Document preflow_handler and affinity_hint
  genirq: Update DocBook comments
  genirq: Forgotten updates/deletions after removal of compat code

Merge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  seqlock: Don't smp_rmb in seqlock reader spin loop
  watchdog, hung_task_timeout: Add Kconfig configurable default
  lockdep: Remove cmpxchg to update nr_chain_hlocks
  lockdep: Print a nicer description for simple irq lock inversions
  lockdep: Replace "Bad BFS generated tree" message with something less cryptic
  lockdep: Print a nicer description for irq inversion bugs
  lockdep: Print a nicer description for simple deadlocks
  lockdep: Print a nicer description for normal deadlocks
  lockdep: Print a nicer description for irq lock inversions

Merge branch 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, gart: Rename pci-gart_64.c to amd_gart_64.c
  x86/amd-iommu: Use threaded interupt handler
  arch/x86/kernel/pci-iommu_table.c: Convert sprintf_symbol to %pS
  x86/amd-iommu: Add support for invalidate_all command
  x86/amd-iommu: Add extended feature detection
  x86/amd-iommu: Add ATS enable/disable code
  x86/amd-iommu: Add flag to indicate IOTLB support
  x86/amd-iommu: Flush device IOTLB if ATS is enabled
  x86/amd-iommu: Select PCI_IOV with AMD IOMMU driver
  PCI: Move ATS declarations in seperate header file
  dma-debug: print information about leaked entry
  x86/amd-iommu: Flush all internal TLBs when IOMMUs are enabled
  x86/amd-iommu: Rename iommu_flush_device
  x86/amd-iommu: Improve handling of full command buffer
  x86/amd-iommu: Rename iommu_flush* to domain_flush*
  x86/amd-iommu: Remove command buffer resetting logic
  x86/amd-iommu: Cleanup completion-wait handling
  x86/amd-iommu: Cleanup inv_pages command handling
  x86/amd-iommu: Move inv-dte command building to own function
  x86/amd-iommu: Move compl-wait command building to own function

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: (34 commits)
  PM: Introduce generic prepare and complete callbacks for subsystems
  PM: Allow drivers to allocate memory from .prepare() callbacks safely
  PM: Remove CONFIG_PM_VERBOSE
  Revert "PM / Hibernate: Reduce autotuned default image size"
  PM / Hibernate: Add sysfs knob to control size of memory for drivers
  PM / Wakeup: Remove useless synchronize_rcu() call
  kmod: always provide usermodehelper_disable()
  PM / ACPI: Remove acpi_sleep=s4_nonvs
  PM / Wakeup: Fix build warning related to the "wakeup" sysfs file
  PM: Print a warning if firmware is requested when tasks are frozen
  PM / Runtime: Rework runtime PM handling during driver removal
  Freezer: Use SMP barriers
  PM / Suspend: Do not ignore error codes returned by suspend_enter()
  PM: Fix build issue in clock_ops.c for CONFIG_PM_RUNTIME unset
  PM: Revert "driver core: platform_bus: allow runtime override of dev_pm_ops"
  OMAP1 / PM: Use generic clock manipulation routines for runtime PM
  PM: Remove sysdev suspend, resume and shutdown operations
  PM / PowerPC: Use struct syscore_ops instead of sysdevs for PM
  PM / UNICORE32: Use struct syscore_ops instead of sysdevs for PM
  PM / AVR32: Use struct syscore_ops instead of sysdevs for PM
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/qib: Use pci_dev->revision
  RDMA/iwcm: Get rid of enum iw_cm_event_status
  IB/ipath: Use pci_dev->revision, again
  IB/qib: Prevent driver hang with unprogrammed boards
  RDMA/cxgb4: EEH errors can hang the driver
  RDMA/cxgb4: Reset wait condition atomically
  RDMA/cxgb4: Fix missing parentheses
  RDMA/cxgb4: Initialization errors can cause crash
  RDMA/cxgb4: Don't change QP state outside EP lock
  RDMA/cma: Add an ID_REUSEADDR option
  RDMA/cma: Fix handling of IPv6 addressing in cma_use_port

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm:
  kmemleak: Initialise kmemleak after debug_objects_mem_init()
  kmemleak: Select DEBUG_FS unconditionally in DEBUG_KMEMLEAK
  kmemleak: Do not return a pointer to an object that kmemleak did not get

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (48 commits)
  MIPS: Move arch_get_unmapped_area and gang to new file.
  MIPS: Cleanup arch_get_unmapped_area
  MIPS: Octeon: Don't request interrupts for unused IPI mailbox bits.
  Octeon: Fix interrupt irq settings for performance counters.
  MIPS: Fix build warnings on defconfigs
  MIPS: Lemote 2F, Malta: Fix build warning
  MIPS: Set ELF AT_PLATFORM string for Loongson2 processors
  MIPS: Set ELF AT_PLATFORM string for BMIPS processors
  MIPS: Introduce set_elf_platform() helper function
  MIPS: JZ4740: setup: Autodetect physical memory.
  MIPS: BCM47xx: Fix MAC address parsing.
  MIPS: BCM47xx: Extend the filling of SPROM from NVRAM
  MIPS: BCM47xx: Register SSB fallback sprom callback
  MIPS: BCM47xx: Extend bcm47xx_fill_sprom with prefix.
  SSB: Change fallback sprom to callback mechanism.
  MIPS: Alchemy: Clean up GPIO registers and accessors
  MIPS: Alchemy: Cleanup DMA addresses
  MIPS: Alchemy: Rewrite ethernet platform setup
  MIPS: Alchemy: Rewrite UART setup and constants.
  MIPS: Alchemy: Convert dbdma.c to syscore_ops
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  input/atari: Fix mouse movement and button mapping
  input/atari: Fix atarimouse init
  input/atari: Use the correct mouse interrupt hook
  m68k/atari: Do not use "/" in interrupt names
  m68k: unistd - Comment out definitions for unimplemented syscalls
  m68k: Really wire up sys_pselect6 and sys_ppoll
  m68k: Merge mmu and non-mmu versions of sys_call_table
  MAINTAINERS: Roman Zippel has been MIA for several years.
  m68k: bitops - Never step beyond the end of the bitmap
  m68k: bitops - offset == ((long)p - (long)vaddr) * 8