- 12 8月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
xfs_attr_rmtval_set is always called with i_lock held, and i_lock is taken in reclaim context so all allocations under it must avoid recursions into the filesystem. Reported by the new reclaim context tracing in lockdep. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NFelix Blyakher <felixb@sgi.com> Signed-off-by: NFelix Blyakher <felixb@sgi.com>
-
- 10 6月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
This patch rips out the XFS ACL handling code and uses the generic fs/posix_acl.c code instead. The ondisk format is of course left unchanged. This also introduces the same ACL caching all other Linux filesystems do by adding pointers to the acl and default acl in struct xfs_inode. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NEric Sandeen <sandeen@sandeen.net>
-
- 08 6月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NEric Sandeen <sandeen@sandeen.net>
-
- 19 1月, 2009 1 次提交
-
-
由 Eric Sandeen 提交于
Remove the last of the macros-defined-to-static-functions. Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 16 1月, 2009 1 次提交
-
-
由 Eric Sandeen 提交于
Remove the last of the macros-defined-to-static-functions. Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 13 8月, 2008 2 次提交
-
-
由 Niv Sardi 提交于
Move it from the attr code to the transaction code and make the attr code call the new function. We rolltrans is really usefull whenever we want to use rolling transaction, should be generic, it isn't dependent on any part of the attr code anyway. We use this excuse to change all the: if ((error = xfs_attr_rolltrans())) calls into: error = xfs_trans_roll(); if (error) SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31729a Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Niv Sardi 提交于
We will need that to be able to calculate the size of log we need for a specific attr (for Create+EA). The local flag is needed so that we can fail if we run into ENOSPC when trying to alloc blocks. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31727a Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NTim Shimmin <tes@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 28 7月, 2008 6 次提交
-
-
由 Christoph Hellwig 提交于
and not go through xfs_attr_list. SGI-PV: 983395 SGI-Modid: xfs-linux-melb:xfs-kern:31324a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NTim Shimmin <tes@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 983394 SGI-Modid: xfs-linux-melb:xfs-kern:31323a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NTim Shimmin <tes@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Lachlan McIlroy 提交于
Use the generic set, get and removexattr methods and supply the s_xattr array with fine-grained handlers. All XFS/Linux highlevel attr handling is rewritten from scratch and placed into fs/xfs/linux-2.6/xfs_xattr.c so that it's separated from the generic low-level code. SGI-PV: 982343 SGI-Modid: xfs-linux-melb:xfs-kern:31234a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NTim Shimmin <tes@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Barry Naujok 提交于
The end of the xfs_da_args structure has 4 unsigned char fields for true/false information on directory and attr operations using the xfs_da_args structure. The following converts these 4 into a op_flags field that uses the first 4 bits for these fields and allows expansion for future operation information (eg. case-insensitive lookup request). SGI-PV: 981520 SGI-Modid: xfs-linux-melb:xfs-kern:31206a Signed-off-by: NBarry Naujok <bnaujok@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
由 Eric Sandeen 提交于
de-duplicate calls to xfs_attr_trace_enter Every call to xfs_attr_trace_enter() shares the exact same 16 args in the middle... just send in the context pointer and let the next level down split it into the ktrace. Compile tested only. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:31200a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NJosef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
No need for addition permission checks in the xattr handler, fs/xattr.c:xattr_permission() already does them, and in fact slightly more strict then what was in the attr_capable handlers. SGI-PV: 981809 SGI-Modid: xfs-linux-melb:xfs-kern:31164a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NTim Shimmin <tes@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 29 4月, 2008 1 次提交
-
-
由 Barry Naujok 提交于
SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30913a Signed-off-by: NBarry Naujok <bnaujok@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 18 4月, 2008 1 次提交
-
-
由 Eric Sandeen 提交于
There is no point to the CONFIG_XFS_SECURITY option; it disables the ability to set security attributes at runtime, but it does not actually slim down or remove any code for runtime. Just remove it and always allow security attributes to be set. SGI-PV: 980310 SGI-Modid: xfs-linux-melb:xfs-kern:30877a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NTim Shimmin <tes@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 07 2月, 2008 1 次提交
-
-
由 David Chinner 提交于
These are mostly locking annotations, marking things static, casts where needed and declaring stuff in header files. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30002a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 16 10月, 2007 1 次提交
-
-
由 Christoph Hellwig 提交于
SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29493a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 15 10月, 2007 1 次提交
-
-
由 Christoph Hellwig 提交于
All vnode ops now take struct xfs_inode pointers and the behaviour related glue is split out into methods of it's own. This required fixing xfs_create/mkdir/symlink to not mess with the inode pointer but rather use a separate boolean for error handling. Thanks to Dave Chinner for that fix. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29492a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 08 5月, 2007 1 次提交
-
-
由 Eric Sandeen 提交于
NULL. Patch provided by Eric Sandeen. SGI-PV: 961693 SGI-Modid: xfs-linux-melb:xfs-kern:28199a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 10 2月, 2007 3 次提交
-
-
由 Eric Sandeen 提交于
The firstblock argument to xfs_bmap_finish is not used by that function. Remove it and cleanup the code a bit. Patch provided by Eric Sandeen. SGI-PV: 960196 SGI-Modid: xfs-linux-melb:xfs-kern:28034a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Barry Naujok 提交于
SGI-PV: 958747 SGI-Modid: xfs-linux-melb:xfs-kern:27792a Signed-off-by: NBarry Naujok <bnaujok@sgi.com> Signed-off-by: NRussell Cattelan <cattelan@thebarn.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 David Chinner 提交于
gcc-4.1 and more recent aggressively inline static functions which increases XFS stack usage by ~15% in critical paths. Prevent this from occurring by adding noinline to the STATIC definition. Also uninline some functions that are too large to be inlined and were causing problems with CONFIG_FORCED_INLINING=y. Finally, clean up all the different users of inline, __inline and __inline__ and put them under one STATIC_INLINE macro. For debug kernels the STATIC_INLINE macro uninlines those functions. SGI-PV: 957159 SGI-Modid: xfs-linux-melb:xfs-kern:27585a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NDavid Chatterton <chatz@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 28 9月, 2006 1 次提交
-
-
由 Tim Shimmin 提交于
code. SGI-PV: 954372 SGI-Modid: xfs-linux-melb:xfs-kern:26583a Signed-off-by: NTim Shimmin <tes@sgi.com>
-
- 20 6月, 2006 1 次提交
-
-
由 Nathan Scott 提交于
pure bloat. SGI-PV: 952969 SGI-Modid: xfs-linux-melb:xfs-kern:26251a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
- 09 6月, 2006 2 次提交
-
-
由 Nathan Scott 提交于
SGI-PV: 953338 SGI-Modid: xfs-linux-melb:xfs-kern:26107a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Olaf Weber 提交于
the range spanned by modifications to the in-core extent map. Add XFS_BUNMAPI() and XFS_SWAP_EXTENTS() macros that call xfs_bunmapi() and xfs_swap_extents() via the ioops vector. Change all calls that may modify the in-core extent map for the data fork to go through the ioops vector. This allows a cache of extent map data to be kept in sync. SGI-PV: 947615 SGI-Modid: xfs-linux-melb:xfs-kern:209226a Signed-off-by: NOlaf Weber <olaf@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
- 29 3月, 2006 1 次提交
-
-
由 Nathan Scott 提交于
these typos. SGI-PV: 904196 SGI-Modid: xfs-linux-melb:xfs-kern:25539a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
- 17 3月, 2006 6 次提交
-
-
由 Nathan Scott 提交于
SGI-PV: 943272 SGI-Modid: xfs-linux-melb:xfs-kern:25505a Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
SGI-PV: 943272 SGI-Modid: xfs-linux-melb:xfs-kern:25504a Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
SGI-PV: 943272 SGI-Modid: xfs-linux-melb:xfs-kern:25498a Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
SGI-PV: 943272 SGI-Modid: xfs-linux-melb:xfs-kern:25497a Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
SGI-PV: 943272 SGI-Modid: xfs-linux-melb:xfs-kern:25495a Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
SGI-PV: 947038 SGI-Modid: xfs-linux-melb:xfs-kern:25474a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
- 12 1月, 2006 1 次提交
-
-
由 Randy Dunlap 提交于
fs: Use <linux/capability.h> where capable() is used. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Acked-by: NTim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 1月, 2006 1 次提交
-
-
由 Christoph Hellwig 提交于
remove checks now in the VFS XFS has an additional xattr interface through obscure ioctl. it requires raised capabilities but we need to add some read-only/immutable checks anyway Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Nathan Scott <nathans@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 11月, 2005 5 次提交
-
-
由 Nathan Scott 提交于
boilerplate. SGI-PV: 913862 SGI-Modid: xfs-linux:xfs-kern:23903a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
SGI-PV: 943122 SGI-Modid: xfs-linux:xfs-kern:23901a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
the FreeBSD porters. SGI-PV: 942906 SGI-Modid: xfs-linux:xfs-kern:23845a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
the data/attr forks now grow up/down from either end of the literal area, rather than dividing the literal area into two chunks and growing both upward. Means we can now make much more efficient use of the attribute space, incl. fitting DMF attributes inline in 256 byte inodes, and large jumps in dbench3 performance numbers. It is self enabling, but can be forced on/off via the attr2/noattr2 mount options. SGI-PV: 941645 SGI-Modid: xfs-linux:xfs-kern:23835a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
attributes format change (attr2). SGI-PV: 941645 SGI-Modid: xfs-linux:xfs-kern:23833a Signed-off-by: NNathan Scott <nathans@sgi.com>
-