.. and I really need to call it something else.  Maybe it is time to
bring back the weasel series, since weasels always make me feel good
about a kernel.

Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>

link vmlinux.o so we may report section mismatch bugs before
we start with the real link - that may error out.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Setting the option DEBUG_SECTION_MISMATCH will
report additional section mismatch'es but this
should in the end makes it possible to get rid of
all of them.

See help text in lib/Kconfig.debug for details.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

The output of 'make help' covers a lot of options, but doesn't include
a listing for 'make prepare'.  Here's a one-liner to fix that...
Signed-off-by: NValdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

With this patch I'm able to find the definition of _xmit_lock defined in
include/linux/netdevice.h as follows:

	struct net_device {
		...
		spinlock_t _xmit_lock ____cacheline_aligned_in_smp;
	}

Otherwise this counts as definition of ____cacheline_aligned_in_smp.
Signed-off-by: NUwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

When multiple built-in modules (especially drivers) provide the same
capability, they're prioritized by link order specified by the order
listed in Makefile.  This implicit ordering is lost for loadable
modules.

When driver modules are loaded by udev, what comes first in
modules.alias file is selected.  However, the order in this file is
indeterministic (depends on filesystem listing order of installed
modules).  This causes confusion.

The solution is two-parted.  This patch updates kbuild such that it
generates and installs modules.order which contains the name of
modules ordered according to Makefile.  The second part is update to
depmod such that it generates output files according to this file.

Note that both obj-y and obj-m subdirs can contain modules and
ordering information between those two are lost from beginning.
Currently obj-y subdirs are put before obj-m subdirs.

Sam Ravnborg cleaned up Makefile modifications and suggested using awk
to remove duplicate lines from modules.order instead of using separate
C program.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Cc: Bill Nottingham <notting@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jon Masters <jonathan@jonmasters.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Add missing $(srctree)/ prefix for scripts used by the includecheck and
versioncheck make targets
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Add 'includecheck' to the Static analyzers help list.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Change two occurances of "behavour" to "behaviour".
Signed-off-by: NLinus Nilsson <lajnold@acc.umu.se>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The check introduced in commit:
4f1127e2 "kbuild: fix
infinite make recursion"

caused certain external modules not to build and
also caused 'make targz-pkg' to fail.
This is a minimal fix so we revert to previous
behaviour - but we do not overwrite the Makefile
in the top-level directory.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Tested-by: NJay Cliburn <jacliburn@bellsouth.net>
Cc: Jay Cliburn <jacliburn@bellsouth.net>

Jan Altenberg <jan.altenberg@linutronix.de> reported that
building with redirected input like this failed:
make O=dir oldconfig bzImage < /dev/null

The problem were caused by a make silentoldconfig being
run before oldconfig and with a non-recent .config the build
failed because silentoldconfig requires non-redirected stdin.

Silentoldconfig was run as a side-effect of having the
top-level Makefile re-made by make.
Introducing an empty rule for the top-level Makefile
(and Kbuild.include) fixed the issue.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in
all.config.

For a fix the diffstat is nice:
 6 files changed, 3 insertions(+), 36 deletions(-)

The patch reverts these commits:
 - 0f855aa6 ("kconfig: add helper to set
   config symbol from environment variable")
 - 2a113281 ("kconfig: use $K64BIT to
   set 64BIT with all*config targets")

Roman Zippel pointed out that kconfig supported string compares so
the additional complexity introduced by the above two patches were
not needed.

With this patch we have following behaviour:

  # make {allno,allyes,allmod,rand}config [ARCH=...]
  option \ host arch      | 32bit         | 64bit
  =====================================================
  ./.                     | 32bit         | 64bit
  ARCH=x86                | 32bit         | 32bit
  ARCH=i386               | 32bit         | 32bit
  ARCH=x86_64             | 64bit         | 64bit

The general rule are that ARCH= and native architecture takes
precedence over the configuration.

So make ARCH=i386 [whatever] will always build a 32-bit kernel
no matter what the configuration says.  The configuration will
be updated to 32-bit if it was configured to 64-bit and the
other way around.

This behaviour is consistent with previous behaviour so no
suprises here.

make ARCH=x86 will per default result in a 32-bit kernel but as
the only ARCH= value x86 allow the user to select between 32-bit
and 64-bit using menuconfig.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Herrmann <aherrman@arcor.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Simplify "make ARCH=x86" and fix kconfig so we again
can set 64BIT in all.config.

For a fix the diffstat is nice:
 6 files changed, 3 insertions(+), 36 deletions(-)

The patch reverts these commits:
0f855aa6
-> kconfig: add helper to set config symbol from environment variable

2a113281
-> kconfig: use $K64BIT to set 64BIT with all*config targets

Roman Zippel pointed out that kconfig supported string
compares so the additional complexity introduced by the
above two patches were not needed.

With this patch we have following behaviour:

# make {allno,allyes,allmod,rand}config [ARCH=...]
option \ host arch      | 32bit         | 64bit
=====================================================
./.                     | 32bit         | 64bit
ARCH=x86                | 32bit         | 32bit
ARCH=i386               | 32bit         | 32bit
ARCH=x86_64             | 64bit         | 64bit

The general rule are that ARCH= and native architecture
takes precedence over the configuration.
So make ARCH=i386 [whatever] will always build a 32-bit
kernel no matter what the configuration says.
The configuration will be updated to 32-bit if it was
configured to 64-bit and the other way around.

This behaviour is consistent with previous behaviour so
no suprises here.

make ARCH=x86 will per default result in a 32-bit kernel
but as the only ARCH= value x86 allow the user to select
between 32-bit and 64-bit using menuconfig. 
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Herrmann <aherrman@arcor.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>

The x86 merge modified the tags target to handle the two separate
source directories. Remove it now that i386/x86_64 are gone completely.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

After unification of the Kconfig files and
introducing K64BIT support in kconfig
it required only trivial changes to enable
"make ARCH=x86".

With this patch you can build for x86_64 in several ways:
1) make ARCH=x86_64
2) make ARCH=x86 K64BIT=y
3) make ARCH=x86 menuconfig
   => select 64-bit

Likewise for i386 with the addition that
i386 is default is you say ARCH=x86.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>

For x86 ARCH may say i386 or x86_64 and soon x86.
Rely on CONFIG_X64_32 to select between 32/64 or just
hardcode the value as appropriate.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>

Too many people have CFLAGS set to support building userspace.
And now Kbuild picks up CFLAGS this caused troubles.

Although people should realise that setting CFLAGS has
a 'global' effect the impact on the kernel build is a suprise.
So change kbuild to pick up value from KCFLAGS that is
much less used.

When kbuild pick up a value it will warn like this:
Makefile:544: "WARNING: Appending $KCFLAGS (-O3) from environment to kernel $CFLAGS"
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Thomas Bächler <thomas@archlinux.org>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>

When configuring the kernel natively the uname matching is off,
so fix up the uname mangling to get the proper SUBARCH. Needs
an explicit range so that SH-5 doesn't break.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Moving the ARCH specific Makefiles for i386 and x86_64
required a litle bit tweaking in the top-lvel Makefile.

SRCARCH is now set in the top-level Makefile
because we need this info to include the correct
arch Makefile.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

The patch is big.  Really big.  You just won't believe how vastly hugely
mindbogglingly big it is.  I mean you may think it's a long way down the
road to the chemist, but that's just peanuts to how big the patch from
2.6.23 is.

But it's all good.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

depmod from module-init-tools 3.3-pre2 are reported
to work fine in cross build.
depmod from module-init-tools 3.1-pre5 are known to SEGV

Do not workaround older module-init-tools bugs here.
The right fix is for users to upgrade module-init-tools.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>

make vmlinux would delete the content of $(MODVERDIR)
equals .tmp_versions. This caused a subsequent
make modules_install to fail.

Fix it so we clean the directory only for the
modules build - but we still unconditionally create it so
we can do:
make dir/file.ko
without a preceeding make modules.

Reported by David Miller <davem@davemloft.net>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: David Miller <davem@davemloft.net>

This removes a syntax error (seen building on Ubuntu Feisty).
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

When building a specific module before doing a total kernel
build it failed because $(MORVERDIR) were missing.
Creating the MODVERDIR explicit (independent of KBUILD_MODULES)
fixed this. As a side-effect the MODVERDIR will be created
also for a non-module build - but no harm done by that.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Begin infrastructure for kernel code samples in the samples/ directory.
Add its Kconfig and Kbuild files.
Source its Kconfig file in all arch/ Kconfigs.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When building embedded systems in a cross-compile environment and
populating a target's file system image, we don't want to run the
depmod on the host as we may be building for a completely different
architecture. Since there's no such thing as a cross-depmod, we
just disable running depmod in the cross-compile case and we just
run depmod on the target at bootup.

Inspired by patches from Christian, Armin and Deepak.

This solves: http://bugzilla.kernel.org/show_bug.cgi?id=3881Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Christian Bjølevik <nafallo@magicalforest.se>
Cc: Deepak Saxena <dsaxena@mvista.com> and
Cc: Armin Kuster <akuster@mvista.com>,

remove .tmp_kallsyms*.S in cscope.files
Signed-off-by: NYinghai Lu <yinghai.lu@sun.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>