Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

  There is a justifying patch for Stephen's patches. Stephen's patches
disallows using a port range of one single port and brakes the meaning
of the 'remaining' variable, in some places it has different meaning.
My patch gives back the sense of 'remaining' variable. It should mean
how many ports are remaining and nothing else. Also my patch allows
using a single port.

  I sure we must be able to use mentioned port range, this does not
restricted by documentation and does not brake current behavior.

usefull links:
Patches posted by Stephen Hemminger
  http://marc.info/?l=linux-netdev&m=119206106218187&w=2
  http://marc.info/?l=linux-netdev&m=119206109918235&w=2

Andrew Morton's comment
  http://marc.info/?l=linux-kernel&m=119248225007737&w=2

1. Allows using a port range of one single port.
2. Gives back sense of 'remaining' variable.
Signed-off-by: NAnton Arapov <aarapov@redhat.com>
Acked-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No one has bothered to set strategy routine for the the netfilter sysctls that
return jiffies to be sysctl_jiffies.

So it appears the sys_sysctl path is unused and untested, so this patch
removes the binary sysctl numbers.

Which fixes the netfilter oops in 2.6.23-rc2-mm2 for me.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't preoperly support the sysctl binary path for flushing the ipv6
routes.  So remove support for a binary path.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- In ipv6 ndisc_ifinfo_syctl_change so it doesn't depend on binary
  sysctl names for a function that works with proc.

- In neighbour.c reorder the table to put the possibly unused entries
  at the end so we can remove them by terminating the table early.

- In neighbour.c kill the entries with questionable binary sysctl
  handling behavior.

- In neighbour.c if we don't have a strategy routine remove the
  binary path.  So we don't the default sysctl strategy routine
  on data that is not ready for it.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

YOSHIFUJI fairly pointed out, that the users increment should
be done under the ip6_sk_fl_lock not to give IPV6_FL_A_PUT a
chance to put this count to zero and release the flowlabel.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the IPV6_FL_A_GET case the hash is checked for flowlabels
with the given label. If it is not found, the lock, protecting 
the hash, is dropped to be re-get for writing. After this a
newly allocated entry is inserted, but no checks are performed
to catch a classical SMP race, when the conflicting label may 
be inserted on another cpu.

Use the (currently unused) return value from fl_intern() to
return the conflicting entry (if found) and re-check, whether
we can reuse it (IPV6_FL_F_EXCL) or return -EEXISTS.

Also add the comment, about why not re-lookup the current
sock for conflicting flowlabel entry.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This routine scans the ipv6_fl_list whose update is
protected with the socket lock and the ip6_sk_fl_lock.

Since the socket lock is not taken in the lookup, use
the other one.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The new flowlabels should be inserted into the sock list
under the ip6_sk_fl_lock. This was lost in one place.

This list is naturally protected with the socket lock, but
the fl6_sock_lookup() is called without it, so another
protection is required.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a new field to xfrm states called inner_mode.  The existing
mode object is renamed to outer_mode.

This is the first part of an attempt to fix inter-family transforms.  As it
is we always use the outer family when determining which mode to use.  As a
result we may end up shoving IPv4 packets into netfilter6 and vice versa.

What we really want is to use the inner family for the first part of outbound
processing and the outer family for the second part.  For inbound processing
we'd use the opposite pairing.

I've also added a check to prevent silly combinations such as transport mode
with inter-family transforms.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Combining RO and AH/ESP/IPCOMP does not make sense.  So this patch adds a
check in the state initialisation function to prevent this.

This allows us to safely remove the mode input function of RO since it
can never be called anymore.  Indeed, if somehow it does get called we'll
know about it through an OOPS instead of it slipping past silently.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is convenient to have a pointer from xfrm_state to address-specific
functions such as the output function for a family.  Currently the
address-specific policy code calls out to the xfrm state code to get
those pointers when we could get it in an easier way via the state
itself.

This patch adds an xfrm_state_afinfo to xfrm_mode (since they're
address-specific) and changes the policy code to use it.  I've also
added an owner field to do reference counting on the module providing
the afinfo even though it isn't strictly necessary today since IPv6
can't be unloaded yet.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently BEET mode does not reinject the packet back into the stack
like tunnel mode does.  Since BEET should behave just like tunnel mode
this is incorrect.

This patch fixes this by introducing a flags field to xfrm_mode that
tells the IPsec code whether it should terminate and reinject the packet
back into the stack.

It then sets the flag for BEET and tunnel mode.

I've also added a number of missing BEET checks elsewhere where we check
whether a given mode is a tunnel or not.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Not every transform needs to zap ip_summed.  For example, a pure tunnel
mode encapsulation does not affect the hardware checksum at all.  In fact,
every algorithm (that needs this) other than AH6 already does its own
ip_summed zapping.

This patch moves the zapping into AH6 which is in line with what IPv4 does.

Possible future optimisation: Checksum the data as we copy them in IPComp.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently xfrm6_rcv_spi gets the nexthdr value itself from the packet.
This means that we need to fix up the value in case we have a 4-on-6
tunnel.  Moving this logic into the caller simplifies things and allows
us to merge the code with IPv4.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I noticed that my recent patch broke 6-on-4 pure IPsec tunnels (the ones
that are only used for incompressible IPsec packets).  Subsequent reviews
show that I broke 6-on-6 pure tunnels more than three years ago and nobody
ever noticed. I suppose every must be testing 6-on-6 IPComp with large
pings which are very compressible :)

This patch fixes both cases.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This functions is never called with NULL or not setup argument,
so the checks inside are redundant.

Also, the return value is always -ENOMEM, so no need in 
additional variable for this.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This call is essentially void.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we now allocate the queues in inet_fragment.c, we
can safely free it in the same place. The ->destructor
callback thus becomes optional for inet_frags.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since this callback is used to check for conflicts in
hashtable when inserting a newly created frag queue, we can
do the same by checking for matching the queue with the 
argument, used to create one.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Here we need another callback ->match to check whether the
entry found in hash matches the key passed. The key used 
is the same as the creation argument for inet_frag_create.

Yet again, this ->match is the same for netfilter and ipv6.
Running a frew steps forward - this callback will later
replace the ->equal one.

Since the inet_frag_find() uses the already consolidated
inet_frag_create() remove the xxx_frag_create from protocol
codes.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This one uses the xxx_frag_intern() and xxx_frag_alloc()
routines, which are already consolidated, so remove them
from protocol code (as promised).

The ->constructor callback is used to init the rest of
the frag queue and it is the same for netfilter and ipv6.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just perform the kzalloc() allocation and setup common
fields in the inet_frag_queue(). Then return the result
to the caller to initialize the rest.

The inet_frag_alloc() may return NULL, so check the 
return value before doing the container_of(). This looks 
ugly, but the xxx_frag_alloc() will be removed soon.

The xxx_expire() timer callbacks are patches, 
because the argument is now the inet_frag_queue, not 
the protocol specific queue.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This routine checks for the existence of a given entry
in the hash table and inserts the new one if needed.

The ->equal callback is used to compare two frag_queue-s
together, but this one is temporary and will be removed
later. The netfilter code and the ipv6 one use the same
routine to compare frags.

The inet_frag_intern() always returns non-NULL pointer,
so convert the inet_frag_queue into protocol specific
one (with the container_of) without any checks.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since the hash value is already calculated in xxx_find, we can 
simply use it later. This is already done in netfilter code, 
so make the same in ipv4 and ipv6.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The icmpv6msg mib statistics is not freed.

This is almost not critical for current kernel, since ipv6
module is unloadable, but this can happen on load error and 
will happen every time we stop the network namespace (when 
we have one, of course).
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Acked-by: NDavid L Stevens <dlstevens@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The difference in both functions is in the "id" passed to
the rt6_select, so just pass it as an extra argument from
two outer helpers.

This is minus 60 lines of code and 360 bytes of .text
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

kmalloc + memset -> kzalloc in frag_alloc_queue
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With all the users of the double pointers removed from the IPv6 input path,
this patch converts all occurances of sk_buff ** to sk_buff * in IPv6 input
handlers.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These ones use the generic data types too, so move
them in one place.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After the evictor code is consolidated there is no need in
passing the extra pointer to the xxx_put() functions.

The only place when it made sense was the evictor code itself.

Maybe this change must got with the previous (or with the
next) patch, but I try to make them shorter as much as
possible to simplify the review (but they are still large
anyway), so this change goes in a separate patch.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The evictors collect some statistics for ipv4 and ipv6,
so make it return the number of evicted queues and account
them all at once in the caller.

The XXX_ADD_STATS_BH() macros are just for this case,
but maybe there are places in code, that can make use of
them as well.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To make in possible we need to know the exact frag queue
size for inet_frags->mem management and two callbacks:

 * to destoy the skb (optional, used in conntracks only)
 * to free the queue itself (mandatory, but later I plan to
   move the allocation and the destruction of frag_queues
   into the common place, so this callback will most likely
   be optional too).
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This code works with the generic data types as well, so
move this into inet_fragment.c

This move makes it possible to hide the secret_timer
management and the secret_rebuild routine completely in
the inet_fragment.c

Introduce the ->hashfn() callback in inet_frags() to get
the hashfun for a given inet_frag_queue() object.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since now all the xxx_frag_kill functions now work
with the generic inet_frag_queue data type, this can
be moved into a common place.

The xxx_unlink() code is moved as well.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some sysctl variables are used to tune the frag queues
management and it will be useful to work with them in
a common way in the future, so move them into one
structure, moreover they are the same for all the frag
management codes.

I don't place them in the existing inet_frags object,
introduced in the previous patch for two reasons:

 1. to keep them in the __read_mostly section;
 2. not to export the whole inet_frags objects outside.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are some objects that are common in all the places
which are used to keep track of frag queues, they are:

 * hash table
 * LRU list
 * rw lock
 * rnd number for hash function
 * the number of queues
 * the amount of memory occupied by queues
 * secret timer

Move all this stuff into one structure (struct inet_frags)
to make it possible use them uniformly in the future. Like
with the previous patch this mostly consists of hunks like

-    write_lock(&ipfrag_lock);
+    write_lock(&ip4_frags.lock);

To address the issue with exporting the number of queues and
the amount of memory occupied by queues outside the .c file
they are declared in, I introduce a couple of helpers.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce the struct inet_frag_queue in include/net/inet_frag.h
file and place there all the common fields from three structs:

 * struct ipq in ipv4/ip_fragment.c
 * struct nf_ct_frag6_queue in nf_conntrack_reasm.c
 * struct frag_queue in ipv6/reassembly.c

After this, replace these fields on appropriate structures with
this structure instance and fix the users to use correct names
i.e. hunks like

-    atomic_dec(&fq->refcnt);
+    atomic_dec(&fq->q.refcnt);

(these occupy most of the patch)
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Uninline netfilter okfns for those cases where gcc can generate tail-calls.

Before:
   text    data     bss     dec     hex filename
8994153 1016524  524652 10535329         a0c1a1 vmlinux

After:
   text    data     bss     dec     hex filename
8992761 1016524  524652 10533937         a0bc31 vmlinux
-------------------------------------------------------
  -1392

All cases have been verified to generate tail-calls with and without netfilter.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Coverity checker spotted that we have already oops'ed if "dst" was
NULL.

Since "dst" being NULL doesn't seem to be possible at this point this
patch removes the NULL check.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NMasahide NAKAMURA <nakam@linux-ipv6.org>
Acked-by: NNoriaki TAKAMIYA <takamiya@po.ntts.co.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>