- 30 8月, 2013 3 次提交
-
-
由 Sebastian Ott 提交于
Add an arch specific attribute to recover a pci function from an error state or config space blockage. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Use pci_claim_resource to find and request bus ressources in pcibios_add_device. Also move some (de)initialization stuff to pcibios_enable_device/pcibios_disable_device. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Convert s390' pci hotplug to be builtin only, with no module option. Suggested-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 22 8月, 2013 3 次提交
-
-
由 Martin Schwidefsky 提交于
With the introduction of PCI it became apparent that s390 should convert to generic hardirqs as too many drivers do not have the correct dependency for GENERIC_HARDIRQS. On the architecture level s390 does not have irq lines. It has external interrupts, I/O interrupts and adapter interrupts. This patch hard-codes all external interrupts as irq #1, all I/O interrupts as irq #2 and all adapter interrupts as irq #3. The additional information from the lowcore associated with the interrupt is stored in the pt_regs of the interrupt frame, where the interrupt handler can pick it up. For PCI/MSI interrupts the adapter interrupt handler scans the relevant bit fields and calls generic_handle_irq with the virtual irq number for the MSI interrupt. Reviewed-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Make use of the adapter interrupt helpers in the PCI code. This is the first step to convert the MSI interrupt code to PCI domains. The patch removes the limitation of 64 adapter interrupts per PCI function. Reviewed-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Rename s390pci_xyz to zpci_xxz and set_irq_ctrl to zpci_set_irq_ctrl. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 27 6月, 2013 7 次提交
-
-
由 Martin Schwidefsky 提交于
There are three users of adapter interrupts: AP, QDIO and PCI. Each registers a single adapter interrupt with independent ISCs. Define a "struct airq" with the interrupt handler, a pointer and a mask for the local summary indicator and the ISC for the adapter interrupt source. Convert the indicator array with its fixed number of adapter interrupt sources per ISE to an array of hlists. This removes the limitation to 32 adapter interrupts per ISC and allows for arbitrary memory locations for the local summary indicator. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The per-pci-device 'debug' attribute is ill defined. For each device it prints the same information, the adapter interrupt bit vector for irq numbers 0 & 1, the start of the global interrupt summary vector and the global irq retries counter. Just remove the attribute and the associated code. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Get rid of the strlen calls, use the return value of sprintf instead. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
The disable slot implementation on s390 currently just detaches the pci function from the partition - without informing the pci layer. Fix this by calling pci_stop_and_remove_bus_device prior to the operation. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Provide wrappers for the [de]configure operations, add some error handling, and use pci_scan_slot instead of pci_scan_single_device. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Use pcibios_release_device to implement architecture-specific functionality when a pci device is released. This function will be called during pci_release_dev. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Use the to_pci_dev macro to fetch a pci_dev from a struct device pointer. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 10 6月, 2013 1 次提交
-
-
由 Ben Hutchings 提交于
All architectures must implement IRQ functions. Since various dependencies on !S390 were removed, there are various drivers that can be selected but will fail to link. Provide a dummy implementation of these functions for the !PCI case. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Cc: stable@vger.kernel.org # 3.9 Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 26 4月, 2013 1 次提交
-
-
由 Sebastian Ott 提交于
The pci config space accessors on s390 are (now) smart enough to figure out if a pci function is available. So instead of calling pci_create_root_bus and then pci_scan_single_device for each available function just call pci_scan_root_bus and let the pci core do the scanning (via config reads on all possible functions) and device creation. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 23 4月, 2013 1 次提交
-
-
由 Gerald Schaefer 提交于
For offset > PAGE_SIZE, s390_dma_map_pages() will issue a warning and return a wrong dma address. This patch removes the warning and fixes the dma return address calculation. Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 17 4月, 2013 12 次提交
-
-
由 Sebastian Ott 提交于
pci_disable_device is called by a driver after it stops using the pci function - e.g. during the removal of the driver. The current implementation removes the architecture specific information of this function such that even after a call to pci_enable_device the pci function is no longer usable. Just remove pcibios_disable_device. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Disable pci on s390. Enable with pci=on. Suggested-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Access to pci config space via pci_ops should not fail silently. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
If a pci load instruction fails the content of the register where the data is stored is possibly unchanged. Fix the inline assembly wrapper __pcilg to not return stale data. Additionally fix the callers of this function who access uninitialized variables. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Don't let pci_load and friends crash the kernel when called with e.g. an invalid offset. Return -ENXIO instead. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Use distinct (and hopefully sane) names for the pci instruction wrappers. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Uninline pci related instruction wrappers to de-bloat the code: add/remove: 15/0 grow/shrink: 2/24 up/down: 1326/-12628 (-11302) This is especially useful for the inlined pci read and write functions which are used all over the kernel. Also remove the unused __stpcifc while at it. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Use pcibios_add_device to do arch specific device initialization. This function will be called during pci_bus_add_device. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Don't modify function handles to get a disabled handle - call clp_disable_fh. With this change we also do no longer deconfigure enabled functions. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Use the debugfs to keep track of a pci function's status changes. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
The hash used for mapping irq numbers to msi descriptors does not utilize all buckets that were allocated. Fix this by using the same value (computed by the number of bits used for the hash function) at relevant places. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Wei Yongjun 提交于
Using kmem_cache_zalloc() instead of kmem_cache_alloc() and memset(). Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 28 2月, 2013 1 次提交
-
-
由 Sasha Levin 提交于
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: NPeter Senna Tschudin <peter.senna@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 2月, 2013 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 14 2月, 2013 4 次提交
-
-
由 Sebastian Ott 提交于
Loading the pci hotplug module when no devices are present will fail but unfortunately some hotplug callbacks stay registered to the pci bus level. Fix this by not letting module loading fail when no pci devices are present and provide proper {de}registration functions for these callbacks. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Use the __get_free_pages wrapper in clp_alloc_block. Also change the allocation to use one page only. This page is used as CLP response block e.g. to list available pci functions. Using one page we can list > 250 pci functions at once and we have code to loop around this CLP command (if not all functions fit into to the CLP block) already in place. Acked-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Tell gcc that the memory region pointed to by req will be used (and changed). Also remove the (now) superfluous memory constraint. Acked-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
pci_probe is too generic and has a name clash with other common code parts. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 08 1月, 2013 2 次提交
-
-
由 Heiko Carstens 提交于
Now that irq sum accounting for /proc/stat's "intr" line works again we have the oddity that the sum field (first field) contains only the sum of the second (external irqs) and third field (I/O interrupts). The reason for that is that these two fields are already sums of all other fields. So if we would sum up everything we would count every interrupt twice. This is broken since the split interrupt accounting was merged two years ago: 052ff461 "[S390] irq: have detailed statistics for interrupt types". To fix this remove the split interrupt fields from /proc/stat's "intr" line again and only have them in /proc/interrupts. This restores the old behaviour, seems to be the only sane fix and mimics a behaviour from other architectures where /proc/interrupts also contains more than /proc/stat's "intr" line does. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Get rid of these: arch/s390/pci/pci_dma.c:16:29: warning: ‘zpci_ioat_dt’ defined but not used [-Wunused-variable] arch/s390/pci/pci.c:164:12: warning: ‘zpci_store_fib’ defined but not used [-Wunused-function] Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 04 1月, 2013 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
This fixes up all of the smaller arches that had __dev* markings for their platform-specific drivers. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Bob Liu <lliubbo@gmail.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Myron Stowe <myron.stowe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: Mark Salter <msalter@redhat.com> Cc: Yong Zhang <yong.zhang0@gmail.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Jan Glauber <jang@linux.vnet.ibm.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 14 12月, 2012 1 次提交
-
-
由 Jan Glauber 提交于
Add support for reading the PCI function measurement block counters provided by the hypervisor. Add two s390 debug features, one for critical errors and one for tracing and provide wrappers to log data. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 11 12月, 2012 2 次提交
-
-
由 Jan Glauber 提交于
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Jan Glauber 提交于
Benefit from pci store block instruction by writing up to 128 bytes with a single instruction to MMIO space. Depending on the workload this can result in a huge performance increase due to the reduced number of instructions. The ordering guarantees of single stores vs. one store block are identical. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-