FIMC driver uses DMA_coherent allocator, which requires proper dma mask
to be set.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: minor title fix]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Doh, a real life genuine preemption leak..

This caused a suspend failure.

Reported-bisected-and-tested-by-the-invaluable: Jeff Chua <jeff.chua.linux@gmail.com>
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Nico Schottelius <nico-linux-20100709@schottelius.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Florian Pritz <flo@xssn.at>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: <stable@kernel.org> # Greg, please apply after: cd7240c0 ("x86, tsc, sched: Recompute cyc2ns_offset's during resume from")
sleep states
LKML-Reference: <1284150773.402.122.camel@laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

A real life genuine preemption leak..
Reported-and-tested-by: NJeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

The sd/mmc data structure is not used if SPI is selected. The configuration
of PIO on the board prevent from using both interfaces at the same time
(board dependent).
Remove the warnings at compilation time adding a preprocessor condition.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Add information in dm9000 mac/phy chip initialization:
- irq resource details
- platform data details
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

The slab.h header is required to use the kmalloc() family of functions.
Due to recent kernel changes, this header must be directly included by
code that calls into the memory allocator.

Without this patch, any code which includes this header fails to build.
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Partially revert e69edc79, which introduced automatic zreladdr
support.  The change in the way the manual definition is defined
seems to be error and conflict prone.  Go back to the original way
we were handling this for the time being, while keeping the automatic
zreladdr facility.

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Without this patch you will not be able to register the first block
because of the second association call on at91_add_device_tc().
Signed-off-by: NFabian Godehardt <fg@emlix.com>
[nicolas.ferre@atmel.com: change tcb1_clk to fake child clock of tcb0_clk]
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: NAndrew Victor <linux@maxim.org.za>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

While registering clock allow to set parent clock other
than mck. It is useful for clocks than can be seen as
child clock of a peripheral.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: NAndrew Victor <linux@maxim.org.za>

They were all bogus artifacts and completely unnecessary.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Top of kvm_kpic_state structure should have the same memory layout as
kvm_pic_state since it is copied by memcpy.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

If there are no vcpus, found will be NULL.  Check before doing anything with
it.
Signed-off-by: NAvi Kivity <avi@redhat.com>

operand::val and operand::orig_val are 32-bit on i386, whereas cmpxchg8b
operands are 64-bit.

Fix by adding val64 and orig_val64 union members to struct operand, and
using them where needed.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Dave Hylands reports:
| We've observed a problem with dma_alloc_writecombine when the system
| is under heavy load (heavy bus traffic).  We've managed to reduce the
| problem to the following snippet, which is run from a kthread in a
| continuous loop:
|
|   void *virtAddr;
|   dma_addr_t physAddr;
|   unsigned int numBytes = 256;
|
|   for (;;) {
|       virtAddr = dma_alloc_writecombine(NULL,
|             numBytes, &physAddr, GFP_KERNEL);
|       if (virtAddr == NULL) {
|          printk(KERN_ERR "Running out of memory\n");
|          break;
|       }
|
|       /* access DMA memory allocated */
|       tmp = virtAddr;
|       *tmp = 0x77;
|
|       /* free DMA memory */
|       dma_free_writecombine(NULL,
|             numBytes, virtAddr, physAddr);
|
|         ...sleep here...
|     }
|
| By itself, the code will run forever with no issues. However, as we
| increase our bus traffic (typically using DMA) then the *tmp = 0x77
| line will eventually cause a page fault. If we add a small delay (a
| few microseconds) before the *tmp = 0x77, then we don't see a page
| fault, even under heavy load.

A dsb() is required after modifying the PTE entries to ensure that they
will always be visible.  Add this dsb().
Reported-by: NDave Hylands <dhylands@gmail.com>
Tested-by: NDave Hylands <dhylands@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit 7cfe2494 ("ARM: AMBA: Add pclk support to AMBA bus
infrastructure") changed AMBA bus to handle the PCLK automatically.
However, in EP93xx clock initialization is arch_initcall which is done
later than AMBA device identification. This causes
amba_get_enable_pclk() to fail resulting device where UARTs are not
functional.

So change ep93xx_clock_init() to be postcore_initcall.
Signed-off-by: NMika Westerberg <mika.westerberg@iki.fi>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This reverts commit 4fa5518c, which causes a compilation regression for
IXP4xx platforms.
Reported-by: NRichard Cochran <richardcochran@gmail.com>
Acked-by: NEric Miao <eric.y.miao@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Recent changes to linker segments that hold per-cpu data broke linking
for m68knommu targets:

  LD      vmlinux
/usr/local/bin/m68k-uclinux-ld.real: error: no memory region specified for loadable section `.data..shared_aligned'

Add missing segments into the m68knommu linker script.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix missing consts in h8300's kernel_execve():

  arch/h8300/kernel/sys_h8300.c: In function 'kernel_execve':
  arch/h8300/kernel/sys_h8300.c:59: warning: initialization from incompatible pointer type
  arch/h8300/kernel/sys_h8300.c:60: warning: initialization from incompatible pointer type
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix h8300's die() to take care of a number of problems:

    CC      arch/h8300/kernel/traps.o
  In file included from arch/h8300/include/asm/bitops.h:10,
                   from include/linux/bitops.h:22,
                   from include/linux/kernel.h:17,
                   from include/linux/sched.h:54,
                   from arch/h8300/kernel/traps.c:18:
  arch/h8300/include/asm/system.h:136: warning: 'struct pt_regs' declared inside parameter list
  arch/h8300/include/asm/system.h:136: warning: its scope is only this definition or declaration, which is probably not what you want
  arch/h8300/kernel/traps.c:100: error: conflicting types for 'die'
  arch/h8300/include/asm/system.h:136: error: previous declaration of 'die' was here
  make[2]: *** [arch/h8300/kernel/traps.o] Error 1
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix h8300's asm/atomic.h to store the IRQ flags in an unsigned long to deal
with warnings of the following type:

  arch/h8300/include/asm/atomic.h: In function 'atomic_add_return':
  arch/h8300/include/asm/atomic.h:22: warning: comparison of distinct pointer types lacks a cast
  arch/h8300/include/asm/atomic.h:24: warning: comparison of distinct pointer types lacks a cast
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reported-by: NDan Liang <dan.liang@atmel.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

kobject_add_internal failed for threshold_bank2 with -EEXIST,
don't try to register things with the same name in the same
directory:

  Pid: 1, comm: swapper Tainted: G        W  2.6.31 #1
  Call Trace:
  [<ffffffff81161b07>] ? kobject_add_internal+0x156/0x180
  [<ffffffff81161cc0>] ? kobject_add+0x66/0x6b
  [<ffffffff81161793>] ? kobject_init+0x42/0x82
  [<ffffffff81161cf9>] ? kobject_create_and_add+0x34/0x63
  [<ffffffff81393963>] ? threshold_create_bank+0x14f/0x259
  [<ffffffff8139310a>] ? mce_create_device+0x8d/0x1b8
  [<ffffffff81646497>] ? threshold_init_device+0x3f/0x80
  [<ffffffff81646458>] ? threshold_init_device+0x0/0x80
  [<ffffffff81009050>] ? do_one_initcall+0x4f/0x143
  [<ffffffff816413a0>] ? kernel_init+0x14c/0x1a2
  [<ffffffff8100c8da>] ? child_rip+0xa/0x20
  [<ffffffff81641254>] ? kernel_init+0x0/0x1a2
  [<ffffffff8100c8d0>] ? child_rip+0x0/0x20
  kobject_create_and_add: kobject_add error: -17

(Probably the for_each_cpu loop should be entirely removed.)
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20100827092006.GB5348@loge.amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch fixes the sparse warnings when the return pointer of
iomap_atomic_prot_pfn() is used as an argument of iowrite32()
and friends.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
LKML-Reference: <1283633804-11749-1-git-send-email-currojerez@riseup.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When the PMU is enabled it is valid to have unhandled nmis, two
events could trigger 'simultaneously' raising two back-to-back
NMIs. If the first NMI handles both, the latter will be empty
and daze the CPU.

The solution to avoid an 'unknown nmi' massage in this case was
simply to stop the nmi handler chain when the PMU is enabled by
stating the nmi was handled. This has the drawback that a) we
can not detect unknown nmis anymore, and b) subsequent nmi
handlers are not called.

This patch addresses this. Now, we check this unknown NMI if it
could be a PMU back-to-back NMI. Otherwise we pass it and let
the kernel handle the unknown nmi.

This is a debug log:

 cpu #6, nmi #32333, skip_nmi #32330, handled = 1, time = 1934364430
 cpu #6, nmi #32334, skip_nmi #32330, handled = 1, time = 1934704616
 cpu #6, nmi #32335, skip_nmi #32336, handled = 2, time = 1936032320
 cpu #6, nmi #32336, skip_nmi #32336, handled = 0, time = 1936034139
 cpu #6, nmi #32337, skip_nmi #32336, handled = 1, time = 1936120100
 cpu #6, nmi #32338, skip_nmi #32336, handled = 1, time = 1936404607
 cpu #6, nmi #32339, skip_nmi #32336, handled = 1, time = 1937983416
 cpu #6, nmi #32340, skip_nmi #32341, handled = 2, time = 1938201032
 cpu #6, nmi #32341, skip_nmi #32341, handled = 0, time = 1938202830
 cpu #6, nmi #32342, skip_nmi #32341, handled = 1, time = 1938443743
 cpu #6, nmi #32343, skip_nmi #32341, handled = 1, time = 1939956552
 cpu #6, nmi #32344, skip_nmi #32341, handled = 1, time = 1940073224
 cpu #6, nmi #32345, skip_nmi #32341, handled = 1, time = 1940485677
 cpu #6, nmi #32346, skip_nmi #32347, handled = 2, time = 1941947772
 cpu #6, nmi #32347, skip_nmi #32347, handled = 1, time = 1941949818
 cpu #6, nmi #32348, skip_nmi #32347, handled = 0, time = 1941951591
 Uhhuh. NMI received for unknown reason 00 on CPU 6.
 Do you have a strange power saving mode enabled?
 Dazed and confused, but trying to continue

Deltas:

 nmi #32334 340186
 nmi #32335 1327704
 nmi #32336 1819      <<<< back-to-back nmi [1]
 nmi #32337 85961
 nmi #32338 284507
 nmi #32339 1578809
 nmi #32340 217616
 nmi #32341 1798      <<<< back-to-back nmi [2]
 nmi #32342 240913
 nmi #32343 1512809
 nmi #32344 116672
 nmi #32345 412453
 nmi #32346 1462095   <<<< 1st nmi (standard) handling 2 counters
 nmi #32347 2046      <<<< 2nd nmi (back-to-back) handling one
 counter nmi #32348 1773      <<<< 3rd nmi (back-to-back)
 handling no counter! [3]

For  back-to-back nmi detection there are the following rules:

The PMU nmi handler was handling more than one counter and no
counter was handled in the subsequent nmi (see [1] and [2]
above).

There is another case if there are two subsequent back-to-back
nmis [3]. The 2nd is detected as back-to-back because the first
handled more than one counter. If the second handles one counter
and the 3rd handles nothing, we drop the 3rd nmi because it
could be a back-to-back nmi.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
[ renamed nmi variable to pmu_nmi to avoid clash with .nmi in entry.S ]
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: peterz@infradead.org
Cc: gorcunov@gmail.com
Cc: fweisbec@gmail.com
Cc: ying.huang@intel.com
Cc: ming.m.lin@intel.com
Cc: eranian@google.com
LKML-Reference: <1283454469-1909-3-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Now that we rely on the number of handled overflows, ensure all
handle_irq implementations actually return the right number.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: peterz@infradead.org
Cc: robert.richter@amd.com
Cc: gorcunov@gmail.com
Cc: fweisbec@gmail.com
Cc: ying.huang@intel.com
Cc: ming.m.lin@intel.com
Cc: eranian@google.com
LKML-Reference: <1283454469-1909-4-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

During testing of a patch to stop having the perf subsytem
swallow nmis, it was uncovered that Nehalem boxes were randomly
getting unknown nmis when using the perf tool.

Moving the ack'ing of the PMI closer to when we get the status
allows the hardware to properly re-set the PMU bit signaling
another PMI was triggered during the processing of the first
PMI.  This allows the new logic for dealing with the
shortcomings of multiple PMIs to handle the extra NMI by
'eat'ing it later.

Now one can wonder why are we getting a second PMI when we
disable all the PMUs in the begining of the NMI handler to
prevent such a case, for that I do not know.  But I know the fix
below helps deal with this quirk.

Tested on multiple Nehalems where the problem was occuring.
With the patch, the code now loops a second time to handle the
second PMI (whereas before it was not).
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: peterz@infradead.org
Cc: robert.richter@amd.com
Cc: gorcunov@gmail.com
Cc: fweisbec@gmail.com
Cc: ying.huang@intel.com
Cc: ming.m.lin@intel.com
Cc: eranian@google.com
LKML-Reference: <1283454469-1909-2-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The validate_event function in the ARM perf events backend has the
following problems:

1.) Events that are disabled count towards the cost.
2.) Events associated with other PMUs [for example, software events or
    breakpoints] do not count towards the cost, but do fail validation,
    causing the group to fail.

This patch changes validate_event so that it ignores events in the
PERF_EVENT_STATE_OFF state or that are scheduled for other PMUs.
Reported-by: NPawel Moll <pawel.moll@arm.com>
Acked-by: NJamie Iles <jamie.iles@picochip.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

CPU_32v6K is selected by CPU_V7 but it only depends on CPU_V6.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The dlpar code can cause a deadlock to occur when making the RTAS
configure-connector call.  This occurs because we make kmalloc calls,
which can block, while parsing the rtas_data_buf and holding the
rtas_data_buf_lock.  This an cause issues if someone else attempts
to grab the rtas_data_bug_lock.

This patch alleviates this issue by copying the contents of the rtas_data_buf
to a local buffer before parsing.  This allows us to only hold the
rtas_data_buf_lock around the RTAS configure-connector calls.
Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

fixes the warning:
.config:369:warning: symbol value '' invalid for ZRELADDR

and the prompt for ZRELADDR on make
Signed-off-by: NErik Gilling <konkers@android.com>

The use of the return value of init_sysfs() with commit

 10f0412f oprofile, x86: fix init_sysfs error handling

discovered the following build error for !CONFIG_PM:

 .../linux/arch/x86/oprofile/nmi_int.c: In function ‘op_nmi_init’:
 .../linux/arch/x86/oprofile/nmi_int.c:784: error: expected expression before ‘do’
 make[2]: *** [arch/x86/oprofile/nmi_int.o] Error 1
 make[1]: *** [arch/x86/oprofile] Error 2

This patch fixes this.
Reported-by: NIngo Molnar <mingo@elte.hu>
Cc: stable@kernel.org
Signed-off-by: NRobert Richter <robert.richter@amd.com>

When compiling alpha generic build get errors such as:
arch/alpha/kernel/err_marvel.c: In function ‘marvel_print_err_cyc’:
arch/alpha/kernel/err_marvel.c:119: error: format ‘%ld’ expects type ‘long int’, but argument 6 has type ‘u64’

Replaced a number of %ld format specifiers with %lld since u64
is unsigned long long.
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

The 2.6.36-rc kernel added three new system calls:
fanotify_init, fanotify_mark, and prlimit64.  This patch
wires them up on ARM.

The only non-trivial issue here is the u64 argument to
sys_fanotify_mark(), but it is the 3rd argument and thus
passed in r2/r3 in both kernel and user space, so it causes
no problems.

Tested with a 2.6.36-rc2 EABI kernel on an ixp4xx machine.
Tested-by: NAnand Gadiyar <gadiyar@ti.com>
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This is purely a cosmetic change to the ARM perf backend because the current
comments about the relationship between NMIs, interrupt context and
perf_event_do_pending are misleading.

This patch updates the comments so that they reflect what the code
actually does (which is in line with other architectures).
Acked-by: NJamie Iles <jamie.iles@picochip.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Updates the Alpha perf_event code to match the changes
recently made to the core perf_event code in commit
e7850595.
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

This patch fixes the failure to compile Alpha Generic because of
previously overlooked calls to ns87312_enable_ide(). The function has
been replaced by newer SuperIO code.
Tested-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NMorten H. Larsen <m-larsen@post6.tele.dk>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Let's use the standard L1_CACHE_ALIGN macro instead.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

This is needed for proper PCI-E support on P1021 SoCs.
Signed-off-by: NAnton Vorontsov <avorontsov@mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>