The QBMan CGR options needs to be zeroed before calling the init
function
Signed-off-by: NRoy Pledge <roy.pledge@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: systemport: Fix padding vs. TSB insertion

This patch series fixes how we pad the packets submitted to the SYSTEMPORT
adapter, and how the transmit status block (prepended 8 bytes) fits in the
picture. The first patch is not technically a bug fix, but is required for the
second path to be applied and to greatly simplify the skb length calculation.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Inserting the TSB means adding an extra 8 bytes in front the of packet
that is going to be used as metadata information by the TDMA engine, but
stripped off, so it does not really help with the packet padding.

For some odd packet sizes that fall below the 60 bytes payload (e.g: ARP)
we can end-up padding them after the TSB insertion, thus making them 64
bytes, but with the TDMA stripping off the first 8 bytes, they could
still be smaller than 64 bytes which is required to ingress the switch.

Fix this by swapping the padding and TSB insertion, guaranteeing that
the packets have the right sizes.

Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we need to pad our packets, utilize skb_put_padto() which
increases skb->len by how much we need to pad, allowing us to eliminate
the test on skb->len right below.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a minor fallout from the merge of the timers and the networking
trees. The following error may result if the PTP_1588_CLOCK
prerequisites are not available:

drivers/built-in.o: In function `ptp_clock_unregister':
(.text+0x40e0a5): undefined reference to `pps_unregister_source'
drivers/built-in.o: In function `ptp_clock_unregister':
(.text+0x40e0cc): undefined reference to `posix_clock_unregister'
drivers/built-in.o: In function `ptp_clock_event':
(.text+0x40e249): undefined reference to `pps_event'
drivers/built-in.o: In function `ptp_clock_register':
(.text+0x40e5e1): undefined reference to `pps_register_source'
drivers/built-in.o: In function `ptp_clock_register':
(.text+0x40e62c): undefined reference to `posix_clock_register'
drivers/built-in.o: In function `ptp_clock_register':
(.text+0x40e68d): undefined reference to `pps_unregister_source'
Signed-off-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip6_route_output() never returns NULL so
check dst->error instead of !dst.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The USB core may call reset_resume when it fails to resume asix device.
And USB core can recovery this abnormal resume at low level driver,
the same .resume at asix driver can work too. Add .reset_resume can
avoid disconnecting after backing from system resume, and NFS can
still be mounted after this commit.
Signed-off-by: NPeter Chen <peter.chen@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The move from rx-handler to L3 receive handler inadvertantly dropped the
rx counters. Restore them.

Fixes: 74b20582 ("net: l3mdev: Add hook in ip and ipv6")
Reported-by: NDinesh Dutt <ddutt@cumulusnetworks.com>
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Final nlmsg_len field update must reflect inserted net_dm_drop_point
data.

This patch depends on previous patch:
"drop_monitor: add missing call to genlmsg_end"
Signed-off-by: NReiter Wolfgang <wr0112358@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When VXLAN offloading is enabled, be_features_check() tries to check if
an encapsulated packet is indeed a VXLAN packet. The check is not strict
enough, and considers any UDP-encapsulated ethernet frame with a 8-byte
tunnel header as being VXLAN. Unfortunately, both GENEVE and VXLAN-GPE
have a 8-byte header, so they get through this check.

Force the UDP destination port to be the one that has been offloaded to
hardware.

Without this, GENEVE-encapsulated packets can end up having an incorrect
checksum when both a GENEVE and a VXLAN (offloaded) tunnel are
configured.

This is similar to commit a547224d ("mlx4e: Do not attempt to
offload VXLAN ports that are unrecognized").
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the case of custom rules being present we need to handle the case of the
LOCAL table being intialized after the new rule has been added.  To address
that I am adding a new check so that we can make certain we don't use an
alias of MAIN for LOCAL when allocating a new table.

Fixes: 0ddcf43d ("ipv4: FIB Local/MAIN table collapse")
Reported-by: NOliver Brunel <jjk@jjacky.com>
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Changed function calls of resource allocation to new API. Changed way
of setting DMA mask. Removed unnecessary sanity check.
This patch is sent in regard to recently applied patch
Commit 83a77e9e
net: macb: Added PCI wrapper for Platform Driver.
Signed-off-by: NBartosz Folta <bfolta@cadence.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Johan Hovold says:

====================
net: stmmac: dwmac-oxnas: fix leaks and simplify pm

These patches fixes of-node and fixed-phydev leaks in the recently added
dwmac-oxnas driver, and ultimately switches over to using the generic pm
implementation as the required callbacks are now in place.

Note that this series has only been compile tested.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that we have an exit callback in place, add init as well and get rid
of the custom PM callbacks in favour of the generic ones.
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make sure to deregister and free any fixed-link phy registered during
probe on probe errors and on driver unbind by calling the new glue
helper function.

For driver unbind, use the generic stmmac-platform remove implementation
and add an exit callback to disable the clock.

Fixes: 5ed74140 ("net: stmmac: Add OXNAS Glue Driver")
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the syscon lookup-by-phandle helper so that the reference taken by
of_parse_phandle() is released when done with the node.

Fixes: 5ed74140 ("net: stmmac: Add OXNAS Glue Driver")
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

s/utliziation/utilization
Signed-off-by: NAlexander Alemayhu <alexander@alemayhu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

5.2. Action on Reception of a Query

 When a system receives a Query, it does not respond immediately.
 Instead, it delays its response by a random amount of time, bounded
 by the Max Resp Time value derived from the Max Resp Code in the
 received Query message.  A system may receive a variety of Queries on
 different interfaces and of different kinds (e.g., General Queries,
 Group-Specific Queries, and Group-and-Source-Specific Queries), each
 of which may require its own delayed response.

 Before scheduling a response to a Query, the system must first
 consider previously scheduled pending responses and in many cases
 schedule a combined response.  Therefore, the system must be able to
 maintain the following state:

 o A timer per interface for scheduling responses to General Queries.

 o A per-group and interface timer for scheduling responses to Group-
   Specific and Group-and-Source-Specific Queries.

 o A per-group and interface list of sources to be reported in the
   response to a Group-and-Source-Specific Query.

 When a new Query with the Router-Alert option arrives on an
 interface, provided the system has state to report, a delay for a
 response is randomly selected in the range (0, [Max Resp Time]) where
 Max Resp Time is derived from Max Resp Code in the received Query
 message.  The following rules are then used to determine if a Report
 needs to be scheduled and the type of Report to schedule.  The rules
 are considered in order and only the first matching rule is applied.

 1. If there is a pending response to a previous General Query
    scheduled sooner than the selected delay, no additional response
    needs to be scheduled.

 2. If the received Query is a General Query, the interface timer is
    used to schedule a response to the General Query after the
    selected delay.  Any previously pending response to a General
    Query is canceled.
--8<--

Currently the timer is rearmed with new random expiration time for
every incoming query regardless of possibly already pending report.
Which is not aligned with the above RFE.
It also might happen that higher rate of incoming queries can
postpone the report after the expiration time of the first query
causing group membership loss.

Now the per interface general query timer is rearmed only
when there is no pending report already scheduled on that interface or
the newly selected expiration time is before the already pending
scheduled report.
Signed-off-by: NMichal Tesar <mtesar@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__skb_flow_dissect can be called with a skb or a data packet, either
can be NULL. All calls seems to have been moved to __skb_header_pointer
except the pptp handling which is still calling skb_header_pointer.

skb_header_pointer will use skb->data and thus:
[  109.556866] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
[  109.557102] IP: [<ffffffff88dc02f8>] __skb_flow_dissect+0xa88/0xce0
[  109.557263] PGD 0
[  109.557338]
[  109.557484] Oops: 0000 [#1] SMP
[  109.557562] Modules linked in: chaoskey
[  109.557783] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.9.0 #79
[  109.557867] Hardware name: Supermicro A1SRM-LN7F/LN5F/A1SRM-LN7F-2758, BIOS 1.0c 11/04/2015
[  109.557957] task: ffff94085c27bc00 task.stack: ffffb745c0068000
[  109.558041] RIP: 0010:[<ffffffff88dc02f8>]  [<ffffffff88dc02f8>] __skb_flow_dissect+0xa88/0xce0
[  109.558203] RSP: 0018:ffff94087fc83d40  EFLAGS: 00010206
[  109.558286] RAX: 0000000000000130 RBX: ffffffff8975bf80 RCX: ffff94084fab6800
[  109.558373] RDX: 0000000000000010 RSI: 000000000000000c RDI: 0000000000000000
[  109.558460] RBP: 0000000000000b88 R08: 0000000000000000 R09: 0000000000000022
[  109.558547] R10: 0000000000000008 R11: ffff94087fc83e04 R12: 0000000000000000
[  109.558763] R13: ffff94084fab6800 R14: ffff94087fc83e04 R15: 000000000000002f
[  109.558979] FS:  0000000000000000(0000) GS:ffff94087fc80000(0000) knlGS:0000000000000000
[  109.559326] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  109.559539] CR2: 0000000000000080 CR3: 0000000281809000 CR4: 00000000001026e0
[  109.559753] Stack:
[  109.559957]  000000000000000c ffff94084fab6822 0000000000000001 ffff94085c2b5fc0
[  109.560578]  0000000000000001 0000000000002000 0000000000000000 0000000000000000
[  109.561200]  0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  109.561820] Call Trace:
[  109.562027]  <IRQ>
[  109.562108]  [<ffffffff88dfb4fa>] ? eth_get_headlen+0x7a/0xf0
[  109.562522]  [<ffffffff88c5a35a>] ? igb_poll+0x96a/0xe80
[  109.562737]  [<ffffffff88dc912b>] ? net_rx_action+0x20b/0x350
[  109.562953]  [<ffffffff88546d68>] ? __do_softirq+0xe8/0x280
[  109.563169]  [<ffffffff8854704a>] ? irq_exit+0xaa/0xb0
[  109.563382]  [<ffffffff8847229b>] ? do_IRQ+0x4b/0xc0
[  109.563597]  [<ffffffff8902d4ff>] ? common_interrupt+0x7f/0x7f
[  109.563810]  <EOI>
[  109.563890]  [<ffffffff88d57530>] ? cpuidle_enter_state+0x130/0x2c0
[  109.564304]  [<ffffffff88d57520>] ? cpuidle_enter_state+0x120/0x2c0
[  109.564520]  [<ffffffff8857eacf>] ? cpu_startup_entry+0x19f/0x1f0
[  109.564737]  [<ffffffff8848d55a>] ? start_secondary+0x12a/0x140
[  109.564950] Code: 83 e2 20 a8 80 0f 84 60 01 00 00 c7 04 24 08 00
00 00 66 85 d2 0f 84 be fe ff ff e9 69 fe ff ff 8b 34 24 89 f2 83 c2
04 66 85 c0 <41> 8b 84 24 80 00 00 00 0f 49 d6 41 8d 31 01 d6 41 2b 84
24 84
[  109.569959] RIP  [<ffffffff88dc02f8>] __skb_flow_dissect+0xa88/0xce0
[  109.570245]  RSP <ffff94087fc83d40>
[  109.570453] CR2: 0000000000000080

Fixes: ab10dccb ("rps: Inspect PPTP encapsulated by GRE to get flow hash")
Signed-off-by: NIan Kumlien <ian.kumlien@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2017-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
A single fix to avoid loading an skb->cb pointer too early.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In ieee80211_xmit_fast(), 'info' is initialized to point to the skb
that's passed in, but that skb may later be replaced by a clone (if
it was shared), leading to an invalid pointer.

This can lead to use-after-free and also later crashes since the
real SKB's info->hw_queue doesn't get initialized properly.

Fix this by assigning info only later, when it's needed, after the
skb replacement (may have) happened.

Cc: stable@vger.kernel.org
Reported-by: NBen Greear <greearb@candelatech.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Guillaume Nault says:

====================
l2tp: socket lookup fixes for l2tp_ip and l2tp_ip6

There are still some cases that aren't correctly handled in the socket
lookup functions of l2tp_ip and l2tp_ip6. This series fixes lookups for
connected sockets and for sockets bound to the IPv6 unspecified
address.

bind() and connect() should now work as expected on IPPROTO_L2TP
sockets. Extra features, like SO_REUSEADDR, remain unsupported.

The matching conditions in __l2tp_ip6_bind_lookup() and
__l2tp_ip_bind_lookup() are getting hard to read. I've kept the single
test approach to make the intend of the patches clear. I'll split the
conditionals once these fixes reach net-next.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For connected sockets, __l2tp_ip{,6}_bind_lookup() needs to check the
remote IP when looking for a matching socket. Otherwise a connected
socket can receive traffic not originating from its peer.

Drop l2tp_ip_bind_lookup() and l2tp_ip6_bind_lookup() instead of
updating their prototype, as these functions aren't used.
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

An L2TP socket bound to the unspecified address should match with any
address. If not, it can't receive any packet and __l2tp_ip6_bind_lookup()
can't prevent another socket from binding on the same device/tunnel ID.

While there, rename the 'addr' variable to 'sk_laddr' (local addr), to
make following patch clearer.
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update nlmsg_len field with genlmsg_end to enable userspace processing
using nlmsg_next helper. Also adds error handling.
Signed-off-by: NReiter Wolfgang <wr0112358@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

->setattr() was recently implemented for socket files to sync the socket
inode's uid to the new 'sk_uid' member of struct sock.  It does this by
copying over the ia_uid member of struct iattr.  However, ia_uid is
actually only valid when ATTR_UID is set in ia_valid, indicating that
the uid is being changed, e.g. by chown.  Other metadata operations such
as chmod or utimes leave ia_uid uninitialized.  Therefore, sk_uid could
be set to a "garbage" value from the stack.

Fix this by only copying the uid over when ATTR_UID is set.

Fixes: 86741ec2 ("net: core: Add a UID field to struct sock.")
Signed-off-by: NEric Biggers <ebiggers@google.com>
Tested-by: NLorenzo Colitti <lorenzo@google.com>
Acked-by: NLorenzo Colitti <lorenzo@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPv4 output routes already use l3mdev device instead of loopback for dst's
if it is applicable. Change local input routes to do the same.

This fixes icmp responses for unreachable UDP ports which are directed
to the wrong table after commit 9d1a6c4e because local_input
routes use the loopback device. Moving from ingress device to loopback
loses the L3 domain causing responses based on the dst to get to lost.

Fixes: 9d1a6c4e ("net: icmp_route_lookup should use rt dev to
		       determine L3 domain")
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IIUC, likely()/unlikely() should apply to the whole *if* statement's
expression, not a part of it  -- fix such expression in  sh_eth_interrupt()
accordingly...

Fixes: 283e38db ("sh_eth: Fix serialisation of interrupt disable with interrupt & NAPI handlers")
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tariq Toukan says:

====================
mlx4 misc fixes

This patchset contains several bug fixes from the team to the
mlx4 Eth and Core drivers.

Series generated against net commit:
60133867 'net: wan: slic_ds26522: fix spelling mistake: "configurated" -> "configured"'
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Demoting simple flow steering rule priority (for DPDK) was achieved by
wrapping FW commands MLX4_QP_FLOW_STEERING_ATTACH/DETACH for the PF
as well, and forcing the priority to MLX4_DOMAIN_NIC in the wrapper
function for the PF and all VFs.

In function mlx4_ib_create_flow(), this change caused the main rule
creation for the PF to be wrapped, while it left the associated
tunnel steering rule creation unwrapped for the PF.

This mismatch caused rule deletion failures in mlx4_ib_destroy_flow()
for the PF when the detach wrapper function did not find the associated
tunnel-steering rule (since creation of that rule for the PF did not
go through the wrapper function).

Fix this by setting MLX4_QP_FLOW_STEERING_ATTACH/DETACH to be "native"
(so that the PF invocation does not go through the wrapper), and perform
the required priority demotion for the PF in the mlx4_ib_create_flow()
code path.

Fixes: 48564135 ("net/mlx4_core: Demote simple multicast and broadcast flow steering rules")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

is_power_of_2 expects unsigned long and we pass u64 max_val_cycles,
this will be truncated on 32 bit systems, and the result is not what we
were expecting.
div_u64 expects u32 as a second argument and we pass
max_val_cycles_rounded which is u64 hence it will always be truncated.
Fix was tested on both 64 and 32 bit systems and got same results for
max_val_cycles and max_val_cycles_rounded.

Fixes: 4850cf45 ("net/mlx4_en: Resolve dividing by zero in 32-bit system")
Signed-off-by: NSlava Shwartsman <slavash@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes BUG_ON() macro from mlx4_alloc_icm_coherent()
by checking DMA address alignment in advance and performing proper
folding in case of error.

Fixes: 5b0bf5e2 ("mlx4_core: Support ICM tables in coherent memory")
Reported-by: NOzgur Karatas <okaratas@member.fsf.org>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Single send WQE in RX buffer should be stamped with software
ownership in order to prevent the flow of QP in error in FW
once UPDATE_QP is called.

Fixes: 9f519f68 ('mlx4_en: Not using Shared Receive Queues')
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

mlx4_QP_FLOW_STEERING_DETACH_wrapper first removes the steering
rule (which results in freeing the rule structure), and then
references a field in this struct (the qp number) when releasing the
busy-status on the rule's qp.

Since this memory was freed, it could reallocated and changed.
Therefore, the qp number in the struct may be incorrect,
so that we are releasing the incorrect qp. This leaves the rule's qp
in the busy state (and could possibly release an incorrect qp as well).

Fix this by saving the qp number in a local variable, for use after
removing the steering rule.

Fixes: 2c473ae7 ("net/mlx4_core: Disallow releasing VF QPs which have steering rules")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we send a packet for our own local address on a non-loopback
interface (e.g. eth0), due to the change had been introduced from
commit 0b922b7a ("net: original ingress device index in PKTINFO"), the
original ingress device index would be set as the loopback interface.
However, the packet should be considered as if it is being arrived via the
sending interface (eth0), otherwise it would break the expectation of the
userspace application (e.g. the DHCPRELEASE message from dhcp_release
binary would be ignored by the dnsmasq daemon, since it come from lo which
is not the interface dnsmasq bind to)

Fixes: 0b922b7a ("net: original ingress device index in PKTINFO")
Acked-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NWei Zhang <asuka.com@163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We miss to check if the netlink message is actually big enough to contain
a struct if_stats_msg.

Add a check to prevent userland from sending us short messages that would
make us access memory beyond the end of the message.

Fixes: 10c9ead9 ("rtnetlink: add new RTM_GETSTATS message to dump...")
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 57016590 ("net: stmmac: Fix race between stmmac_drv_probe and
stmmac_open") re-ordered how the MDIO bus registration and the network
device are registered, but missed to unwind the MDIO bus registration in
case we fail to register the network device.

Fixes: 57016590 ("net: stmmac: Fix race between stmmac_drv_probe and stmmac_open")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NKweh, Hock Leong <hock.leong.kweh@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output

There is an inconsistent conditional judgement between __ip6_append_data
and ip6_finish_output functions, the variable length in __ip6_append_data
just include the length of application's payload and udp6 header, don't
include the length of ipv6 header, but in ip6_finish_output use
(skb->len > ip6_skb_dst_mtu(skb)) as judgement, and skb->len include the
length of ipv6 header.

That causes some particular application's udp6 payloads whose length are
between (MTU - IPv6 Header) and MTU were fragmented by ip6_fragment even
though the rst->dev support UFO feature.

Add the length of ipv6 header to length in __ip6_append_data to keep
consistent conditional judgement as ip6_finish_output for ip6 fragment.
Signed-off-by: NZheng Li <james.z.li@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

trivial fix to spelling mistake in pr_info message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>