Dmitry reported a deadlock scenario:

unix_bind() path:
u->bindlock ==> sb_writer

do_splice() path:
sb_writer ==> pipe->mutex ==> u->bindlock

In the unix_bind() code path, unix_mknod() does not have to
be done with u->bindlock held, since it is a pure fs operation,
so we can just move unix_mknod() out.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Tested-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Rainer Weikusat <rweikusat@mobileactivedefense.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

mlxsw_sp_nexthop_group_mac_update() is called in one of two cases:

1) When the MAC of a nexthop needs to be updated
2) When the size of a nexthop group has changed

In the second case the adjacency entries for the nexthop group need to
be reallocated from the adjacency table. In this case we must write to
the entries the MAC addresses of all the nexthops that should be
offloaded and not only those whose MAC changed. Otherwise, these entries
would be filled with garbage data, resulting in packet loss.

Fixes: a7ff87ac ("mlxsw: spectrum_router: Implement next-hop routing")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Runtime suspend shouldn't be executed if the tx queue is not empty,
because the device is not idle.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The old description basically read like "ethernet-phy-idAAAA.BBBB" can
be specified when you know the actual PHY ID. However, specifying this
has a side-effect: it forces Linux to bind to a certain PHY driver (the
one that matches the ID given in the compatible string), ignoring the ID
which is reported by the actual PHY.
Whenever a device is shipped with (multiple) different PHYs during it's
production lifetime then explicitly specifying
"ethernet-phy-idAAAA.BBBB" could break certain revisions of that device.
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NRob Herring <robh@kernel.org>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJingju Hou <houjingj@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2017-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
A single fix, for a sleeping context problem found by LTP.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In my previous patch, I missed that rate_control_rate_init() is
called from some places that cannot sleep, so it cannot call
ieee80211_recalc_min_chandef(). Remove that call for now to fix
the context bug, we'll have to find a different way to fix the
minimum channel width issue.

Fixes: 96aa2e7c ("mac80211: calculate min channel width correctly")
Reported-by: NXiaolong Ye (via lkp-robot) <xiaolong.ye@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

We need to check the return value of phy_connect_direct() in
dsa_slave_phy_connect() otherwise we may be continuing the
initialization of a slave network device with a PHY that already
attached somewhere else and which will soon be in error because the PHY
device is in error.

The conditions for such an error to occur are that we have a port of our
switch that is not disabled, and has the same port number as a PHY
address (say both 5) that can be probed using the DSA slave MII bus. We
end-up having this slave network device find a PHY at the same address
as our port number, and we try to attach to it.

A slave network (e.g: port 0) has already attached to our PHY device,
and we try to re-attach it with a different network device, but since we
ignore the error we would end-up initializating incorrect device
references by the time the slave network interface is opened.

The code has been (re)organized several times, making it hard to provide
an exact Fixes tag, this is a bugfix nonetheless.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

phy_error() is called in the PHY state machine workqueue context, and
calls phy_trigger_machine() which does a cancel_delayed_work_sync() of
the workqueue we execute from, causing a deadlock situation.

Augment phy_trigger_machine() machine with a sync boolean indicating
whether we should use cancel_*_sync() or just cancel_*_work().

Fixes: 3c293f4e ("net: phy: Trigger state machine on state change and not polling.")
Reported-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MPLS multipath for LSR is broken -- always selecting the first nexthop
in the one label case. For example:

    $ ip -f mpls ro ls
    100
            nexthop as to 200 via inet 172.16.2.2  dev virt12
            nexthop as to 300 via inet 172.16.3.2  dev virt13
    101
            nexthop as to 201 via inet6 2000:2::2  dev virt12
            nexthop as to 301 via inet6 2000:3::2  dev virt13

In this example incoming packets have a single MPLS labels which means
BOS bit is set. The BOS bit is passed from mpls_forward down to
mpls_multipath_hash which never processes the hash loop because BOS is 1.

Update mpls_multipath_hash to process the entire label stack. mpls_hdr_len
tracks the total mpls header length on each pass (on pass N mpls_hdr_len
is N * sizeof(mpls_shim_hdr)). When the label is found with the BOS set
it verifies the skb has sufficient header for ipv4 or ipv6, and find the
IPv4 and IPv6 header by using the last mpls_hdr pointer and adding 1 to
advance past it.

With these changes I have verified the code correctly sees the label,
BOS, IPv4 and IPv6 addresses in the network header and icmp/tcp/udp
traffic for ipv4 and ipv6 are distributed across the nexthops.

Fixes: 1c78efa8 ("mpls: flow-based multipath selection")
Acked-by: NRobert Shearman <rshearma@brocade.com>
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tom Lendacky says:

====================
amd-xgbe: AMD XGBE driver fixes 2017-01-20

This patch series addresses some issues in the AMD XGBE driver.

The following fixes are included in this driver update series:

- Add a fix for a version of the hardware that uses different register
  offset values for a device with the same PCI device ID
- Add support to check the return code from the xgbe_init() function

This patch series is based on net.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The xgbe_init() routine returns a return code indicating success or
failure, but the return code is not checked. Add code to xgbe_init()
to issue a message when failures are seen and add code to check the
xgbe_init() return code.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A newer version of the hardware is using the same PCI ids for the network
device but has altered register definitions for determining the window
settings for the indirect PCS access.  Add support to check for this
hardware and if found use the new register values.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Any bridge options specified during link creation (e.g. ip link add)
are ignored as br_dev_newlink() does not process them.
Use br_changelink() to do it.

Fixes: 13323516 ("bridge: implement rtnl_link_ops->changelink")
Signed-off-by: NIvan Vecera <cera@cera.cz>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During an OOM scenario, request slots could not be created as skb
allocation fails. So the netback cannot pass in packets and netfront
wrongly assumes that there is no more work to be done and it disables
polling. This causes Rx to stall.

The issue is with the retry logic which schedules the timer if the
created slots are less than NET_RX_SLOTS_MIN. The count of new request
slots to be pushed are calculated as a difference between new req_prod
and rsp_cons which could be more than the actual slots, if there are
unconsumed responses.

The fix is to calculate the count of newly created slots as the
difference between new req_prod and old req_prod.
Signed-off-by: NVineeth Remanan Pillai <vineethp@amazon.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A driver using dev_alloc_page() must not reuse a page allocated from
emergency memory reserve.

Otherwise all packets using this page will be immediately dropped,
unless for very specific sockets having SOCK_MEMALLOC bit set.

This issue might be hard to debug, because only a fraction of received
packets would be dropped.

Fixes: 4415a031 ("net/mlx5e: Implement RX mapped page cache for page recycle")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix build errors for samples/bpf xdp_tx_iptunnel and tc_l2_redirect,
when dynamic debugging is enabled (CONFIG_DYNAMIC_DEBUG) by defining a
fake KBUILD_MODNAME.

Just like Daniel Borkmann fixed other samples/bpf in commit
96a8eb1e ("bpf: fix samples to add fake KBUILD_MODNAME").

Fixes: 12d8bb64 ("bpf: xdp: Add XDP example for head adjustment")
Fixes: 90e02896 ("bpf: Add test for bpf_redirect to ipip/ip6tnl")
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

gcc-7 and probably earlier versions get confused by this function
and print a harmless warning:

drivers/net/ethernet/broadcom/bcm63xx_enet.c: In function 'bcm_enet_open':
drivers/net/ethernet/broadcom/bcm63xx_enet.c:1130:3: error: 'phydev' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This adds an initialization for the 'phydev' variable when it is unused
and changes the check to test for that NULL pointer to make it clear
that we always pass a valid pointer here.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

struct qed_ll2_info is rather large, so putting it on the stack
can cause an overflow, as this warning tries to tell us:

drivers/net/ethernet/qlogic/qed/qed_ll2.c: In function 'qed_ll2_start':
drivers/net/ethernet/qlogic/qed/qed_ll2.c:2159:1: error: the frame size of 1056 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

qed_ll2_start_ooo() already uses a dynamic allocation for the structure
to work around that problem, and we could do the same in qed_ll2_start()
as well as qed_roce_ll2_start(), but since the structure is only
used to pass a couple of initialization values here, it seems nicer
to replace it with a different structure.

Lacking any idea for better naming, I'm adding 'struct qed_ll2_conn',
which now contains all the initialization data, and this now simply
gets copied into struct qed_ll2_info rather than assigning all members
one by one.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NYuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 0e73fc9a.

This fix wasn't correct, a better one is coming right up.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The comparison on the timeout can lead to an array overrun
read on sctp_timer_tbl because of an off-by-one error. Fix
this by using < instead of <= and also compare to the array
size rather than SCTP_EVENT_TIMEOUT_MAX.

Fixes CoverityScan CID#1397639 ("Out-of-bounds read")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

seg6_genl_get_tunsrc() and set_tun_src() do not handle tun_src being
possibly NULL, so we must check kmemdup() return value and abort if
it is NULL

Fixes: 915d7e5e ("ipv6: sr: add code base for control plane support of SR-IPv6")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: David Lebrun <david.lebrun@uclouvain.be>
Acked-by: NDavid Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The rtl8152_post_reset() should sumbit rx urb and interrupt transfer,
otherwise the rx wouldn't work and the linking change couldn't be
detected.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 501db511 ("virtio: don't set VIRTIO_NET_HDR_F_DATA_VALID on
xmit") in fact disables VIRTIO_HDR_F_DATA_VALID on receiving path too,
fixing this by adding a hint (has_data_valid) and set it only on the
receiving path.

Cc: Rolf Neugebauer <rolf.neugebauer@docker.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Acked-by: NRolf Neugebauer <rolf.neugebauer@docker.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A driver using dev_alloc_page() must not reuse a page that had to
use emergency memory reserve.

Otherwise all packets using this page will be immediately dropped,
unless for very specific sockets having SOCK_MEMALLOC bit set.

This issue might be hard to debug, because only a fraction of the RX
ring buffer would suffer from drops.

Fixes: 75354148 ("gianfar: Add paged allocation and Rx S/G")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Claudiu Manoil <claudiu.manoil@freescale.com>
Acked-by: NClaudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Found that if we run LTP netstress test with large MSS (65K),
the first attempt from server to send data comparable to this
MSS on fastopen connection will be delayed by the probe timer.

Here is an example:

     < S  seq 0:0 win 43690 options [mss 65495 wscale 7 tfo cookie] length 32
     > S. seq 0:0 ack 1 win 43690 options [mss 65495 wscale 7] length 0
     < .  ack 1 win 342 length 0

Inside tcp_sendmsg(), tcp_send_mss() returns max MSS in 'mss_now',
as well as in 'size_goal'. This results the segment not queued for
transmition until all the data copied from user buffer. Then, inside
__tcp_push_pending_frames(), it breaks on send window test and
continues with the check probe timer.

Fragmentation occurs in tcp_write_wakeup()...

+0.2 > P. seq 1:43777 ack 1 win 342 length 43776
     < .  ack 43777, win 1365 length 0
     > P. seq 43777:65001 ack 1 win 342 options [...] length 21224
     ...

This also contradicts with the fact that we should bound to the half
of the window if it is large.

Fix this flaw by correctly initializing max_window. Before that, it
could have large values that affect further calculations of 'size_goal'.

Fixes: 168a8f58 ("tcp: TCP Fast Open Server - main code path")
Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A cleanup removed the only user of this variable

mlx5/core/en_ethtool.c: In function 'mlx5e_set_channels':
mlx5/core/en_ethtool.c:546:6: error: unused variable 'ncv' [-Werror=unused-variable]

Let's remove the declaration as well.

Fixes: 639e9e94 ("net/mlx5e: Remove unnecessary checks when setting num channels")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just like commit 4acd4945 ("ipv6: addrconf: Avoid calling
netdevice notifiers with RCU read-side lock"), it is unnecessary
to make addrconf_disable_change() use RCU iteration over the
netdev list, since it already holds the RTNL lock, or we may meet
Illegal context switch in RCU read-side critical section.
Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ganesg will be taking over as maintainer from now
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds two helpers, bpf_map_area_alloc() and bpf_map_area_free(),
that are to be used for map allocations. Using kmalloc() for very large
allocations can cause excessive work within the page allocator, so i) fall
back earlier to vmalloc() when the attempt is considered costly anyway,
and even more importantly ii) don't trigger OOM killer with any of the
allocators.

Since this is based on a user space request, for example, when creating
maps with element pre-allocation, we really want such requests to fail
instead of killing other user space processes.

Also, don't spam the kernel log with warnings should any of the allocations
fail under pressure. Given that, we can make backend selection in
bpf_map_area_alloc() generic, and convert all maps over to use this API
for spots with potentially large allocation requests.

Note, replacing the one kmalloc_array() is fine as overflow checks happen
earlier in htab_map_alloc(), since it must also protect the multiplication
for vmalloc() should kmalloc_array() fail.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trying to add an mpls encap route when the MPLS modules are not loaded
hangs. For example:

    CONFIG_MPLS=y
    CONFIG_NET_MPLS_GSO=m
    CONFIG_MPLS_ROUTING=m
    CONFIG_MPLS_IPTUNNEL=m

    $ ip route add 10.10.10.10/32 encap mpls 100 via inet 10.100.1.2

The ip command hangs:
root       880   826  0 21:25 pts/0    00:00:00 ip route add 10.10.10.10/32 encap mpls 100 via inet 10.100.1.2

    $ cat /proc/880/stack
    [<ffffffff81065a9b>] call_usermodehelper_exec+0xd6/0x134
    [<ffffffff81065efc>] __request_module+0x27b/0x30a
    [<ffffffff814542f6>] lwtunnel_build_state+0xe4/0x178
    [<ffffffff814aa1e4>] fib_create_info+0x47f/0xdd4
    [<ffffffff814ae451>] fib_table_insert+0x90/0x41f
    [<ffffffff814a8010>] inet_rtm_newroute+0x4b/0x52
    ...

modprobe is trying to load rtnl-lwt-MPLS:

root       881     5  0 21:25 ?        00:00:00 /sbin/modprobe -q -- rtnl-lwt-MPLS

and it hangs after loading mpls_router:

    $ cat /proc/881/stack
    [<ffffffff81441537>] rtnl_lock+0x12/0x14
    [<ffffffff8142ca2a>] register_netdevice_notifier+0x16/0x179
    [<ffffffffa0033025>] mpls_init+0x25/0x1000 [mpls_router]
    [<ffffffff81000471>] do_one_initcall+0x8e/0x13f
    [<ffffffff81119961>] do_init_module+0x5a/0x1e5
    [<ffffffff810bd070>] load_module+0x13bd/0x17d6
    ...

The problem is that lwtunnel_build_state is called with rtnl lock
held preventing mpls_init from registering.

Given the potential references held by the time lwtunnel_build_state it
can not drop the rtnl lock to the load module. So, extract the module
loading code from lwtunnel_build_state into a new function to validate
the encap type. The new function is called while converting the user
request into a fib_config which is well before any table, device or
fib entries are examined.

Fixes: 745041e2 ("lwtunnel: autoload of lwt modules")
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the TPA GRO code path, initialize the tcp_opt_len variable to 0 so
that it will be correct for packets without TCP timestamps.  The bug
caused the SKB fields to be incorrectly set up for packets without
TCP timestamps, leading to these packets being rejected by the stack.
Reported-by: NAndy Gospodarek <andrew.gospodarek@broadocm.com>
Acked-by: NAndy Gospodarek <andrew.gospodarek@broadocm.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit a1cba561 ("net: phy: Add Broadcom phy library for common
interfaces") make the BCM63xx PHY driver utilize bcm_phy_config_intr()
which would appear to do the right thing, except that it does not write
to the MII_BCM63XX_IR register but to MII_BCM54XX_ECR which is
different.

This would be causing invalid link parameters and events from being
generated by the PHY interrupt.

Fixes: a1cba561 ("net: phy: Add Broadcom phy library for common interfaces")
Signed-off-by: NDaniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ashizuka reported a highmem oddity and sent a patch for freescale
fec driver.

But the problem root cause is that core networking stack
must ensure no skb with highmem fragment is ever sent through
a device that does not assert NETIF_F_HIGHDMA in its features.

We need to call illegal_highdma() from harmonize_features()
regardless of CSUM checks.

Fixes: ec5f0615 ("net: Kill link between CSUM and SG features.")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Pravin Shelar <pshelar@ovn.org>
Reported-by: N"Ashizuka, Yuusuke" <ashiduka@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Igor Druzhinin says:

====================
xen-netback: fix memory leaks on XenBus disconnect

Just split the initial patch in two as proposed by Wei.

Since the approach for locking netdev statistics is inconsistent (tends not
to have any locking at all) accross the kernel we'd better to rely on our
internal lock for this purpose.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

vif->lock is used to protect statistics gathering agents from using the
queue structure during cleaning.
Signed-off-by: NIgor Druzhinin <igor.druzhinin@citrix.com>
Acked-by: NWei Liu <wei.liu2@citrix.com>
Reviewed-by: NPaul Durrant <paul.durrant@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eliminate memory leaks introduced several years ago by cleaning the
queue resources which are allocated on XenBus connection event. Namely, queue
structure array and pages used for IO rings.
Signed-off-by: NIgor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: NPaul Durrant <paul.durrant@citrix.com>
Acked-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tariq Toukan says:

====================
ethtool fix

This patchset from Eran contains a fix to ethtool set_channels, where the call
to get_channels with an uninitialized parameter might result in garbage fields.
It also contains two followup changes in our mlx4/mlx5 Eth drivers.

Series generated against net commit:
0faa9cb5 net sched actions: fix refcnt when GETing of action after bind
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Boundaries checks for the number of RX and TX should be checked by the
caller and not in the driver.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Boundaries checks for the number of RX, TX, other and combined channels
should be checked by the caller and not in the driver.

In addition, remove wrong memset on get channels as it overrides the cmd
field in the requester struct.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>