- 07 10月, 2016 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull pstore updates from Kees Cook: - Fix bug in module unloading - Switch to always using spinlock over cmpxchg - Explicitly define pstore backend's supported modes - Remove bounce buffer from pmsg - Switch to using memcpy_to/fromio() - Error checking improvements * tag 'pstore-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: ramoops: move spin_lock_init after kmalloc error checking pstore/ram: Use memcpy_fromio() to save old buffer pstore/ram: Use memcpy_toio instead of memcpy pstore/pmsg: drop bounce buffer pstore/ram: Set pstore flags dynamically pstore: Split pstore fragile flags pstore/core: drop cmpxchg based updates pstore/ramoops: fixup driver removal
-
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux由 Linus Torvalds 提交于
Pull orangefs updates from Mike Marshall: "Miscellaneous improvements: - clean up debugfs globals - remove dead code in sysfs - reorganize duplicated sysfs attribute structs - consolidate sysfs show and store functions - remove duplicated sysfs_ops structures - describe organization of sysfs - make devreq_mutex static - g_orangefs_stats -> orangefs_stats for consistency - rename most remaining global variables Feature negotiation: - enable Orangefs userspace and kernel module to negotiate mutually supported features" * tag 'for-linus-4.9-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: Revert "orangefs: bump minimum userspace version" orangefs: bump minimum userspace version orangefs: rename most remaining global variables orangefs: g_orangefs_stats -> orangefs_stats for consistency orangefs: make devreq_mutex static orangefs: describe organization of sysfs orangefs: remove duplicated sysfs_ops structures orangefs: consolidate sysfs show and store functions orangefs: reorganize duplicated sysfs attribute structs orangefs: remove dead code in sysfs orangefs: clean up debugfs globals orangefs: do not allow client readahead cache without feature bit orangefs: add features op orangefs: record userspace version for feature compatbility orangefs: add readahead count and size to sysfs orangefs: re-add flush_racache from out-of-tree orangefs: turn param response value into union orangefs: add missing param request ops orangefs: rename remaining bits of mmap readahead cache
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing updates from Steven Rostedt: "This release cycle is rather small. Just a few fixes to tracing. The big change is the addition of the hwlat tracer. It not only detects SMIs, but also other latency that's caused by the hardware. I have detected some latency from large boxes having bus contention" * tag 'trace-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Call traceoff trigger after event is recorded ftrace/scripts: Add helper script to bisect function tracing problem functions tracing: Have max_latency be defined for HWLAT_TRACER as well tracing: Add NMI tracing in hwlat detector tracing: Have hwlat trace migrate across tracing_cpumask CPUs tracing: Add documentation for hwlat_detector tracer tracing: Added hardware latency tracer ftrace: Access ret_stack->subtime only in the function profiler function_graph: Handle TRACE_BPUTS in print_graph_comment tracing/uprobe: Drop isdigit() check in create_trace_uprobe
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen updates from David Vrabel: "xen features and fixes for 4.9: - switch to new CPU hotplug mechanism - support driver_override in pciback - require vector callback for HVM guests (the alternate mechanism via the platform device has been broken for ages)" * tag 'for-linus-4.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/x86: Update topology map for PV VCPUs xen/x86: Initialize per_cpu(xen_vcpu, 0) a little earlier xen/pciback: support driver_override xen/pciback: avoid multiple entries in slot list xen/pciback: simplify pcistub device handling xen: Remove event channel notification through Xen PCI platform device xen/events: Convert to hotplug state machine xen/x86: Convert to hotplug state machine x86/xen: add missing \n at end of printk warning message xen/grant-table: Use kmalloc_array() in arch_gnttab_valloc() xen: Make VPMU init message look less scary xen: rename xen_pmu_init() in sys-hypervisor.c hotplug: Prevent alloc/free of irq descriptors during cpu up/down (again) xen/x86: Move irq allocation from Xen smp_op.cpu_up()
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM updates from Radim Krčmář: "All architectures: - move `make kvmconfig` stubs from x86 - use 64 bits for debugfs stats ARM: - Important fixes for not using an in-kernel irqchip - handle SError exceptions and present them to guests if appropriate - proxying of GICV access at EL2 if guest mappings are unsafe - GICv3 on AArch32 on ARMv8 - preparations for GICv3 save/restore, including ABI docs - cleanups and a bit of optimizations MIPS: - A couple of fixes in preparation for supporting MIPS EVA host kernels - MIPS SMP host & TLB invalidation fixes PPC: - Fix the bug which caused guests to falsely report lockups - other minor fixes - a small optimization s390: - Lazy enablement of runtime instrumentation - up to 255 CPUs for nested guests - rework of machine check deliver - cleanups and fixes x86: - IOMMU part of AMD's AVIC for vmexit-less interrupt delivery - Hyper-V TSC page - per-vcpu tsc_offset in debugfs - accelerated INS/OUTS in nVMX - cleanups and fixes" * tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (140 commits) KVM: MIPS: Drop dubious EntryHi optimisation KVM: MIPS: Invalidate TLB by regenerating ASIDs KVM: MIPS: Split kernel/user ASID regeneration KVM: MIPS: Drop other CPU ASIDs on guest MMU changes KVM: arm/arm64: vgic: Don't flush/sync without a working vgic KVM: arm64: Require in-kernel irqchip for PMU support KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register KVM: PPC: Book3S PR: Support 64kB page size on POWER8E and POWER8NVL KVM: PPC: Book3S: Remove duplicate setting of the B field in tlbie KVM: PPC: BookE: Fix a sanity check KVM: PPC: Book3S HV: Take out virtual core piggybacking code KVM: PPC: Book3S: Treat VTB as a per-subcore register, not per-thread ARM: gic-v3: Work around definition of gic_write_bpr1 KVM: nVMX: Fix the NMI IDT-vectoring handling KVM: VMX: Enable MSR-BASED TPR shadow even if APICv is inactive KVM: nVMX: Fix reload apic access page warning kvmconfig: add virtio-gpu to config fragment config: move x86 kvm_guest.config to a common location arm64: KVM: Remove duplicating init code for setting VMID ARM: KVM: Support vgic-v3 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace由 Linus Torvalds 提交于
Pull namespace updates from Eric Biederman: "This set of changes is a number of smaller things that have been overlooked in other development cycles focused on more fundamental change. The devpts changes are small things that were a distraction until we managed to kill off DEVPTS_MULTPLE_INSTANCES. There is an trivial regression fix to autofs for the unprivileged mount changes that went in last cycle. A pair of ioctls has been added by Andrey Vagin making it is possible to discover the relationships between namespaces when referring to them through file descriptors. The big user visible change is starting to add simple resource limits to catch programs that misbehave. With namespaces in general and user namespaces in particular allowing users to use more kinds of resources, it has become important to have something to limit errant programs. Because the purpose of these limits is to catch errant programs the code needs to be inexpensive to use as it always on, and the default limits need to be high enough that well behaved programs on well behaved systems don't encounter them. To this end, after some review I have implemented per user per user namespace limits, and use them to limit the number of namespaces. The limits being per user mean that one user can not exhause the limits of another user. The limits being per user namespace allow contexts where the limit is 0 and security conscious folks can remove from their threat anlysis the code used to manage namespaces (as they have historically done as it root only). At the same time the limits being per user namespace allow other parts of the system to use namespaces. Namespaces are increasingly being used in application sand boxing scenarios so an all or nothing disable for the entire system for the security conscious folks makes increasing use of these sandboxes impossible. There is also added a limit on the maximum number of mounts present in a single mount namespace. It is nontrivial to guess what a reasonable system wide limit on the number of mount structure in the kernel would be, especially as it various based on how a system is using containers. A limit on the number of mounts in a mount namespace however is much easier to understand and set. In most cases in practice only about 1000 mounts are used. Given that some autofs scenarious have the potential to be 30,000 to 50,000 mounts I have set the default limit for the number of mounts at 100,000 which is well above every known set of users but low enough that the mount hash tables don't degrade unreaonsably. These limits are a start. I expect this estabilishes a pattern that other limits for resources that namespaces use will follow. There has been interest in making inotify event limits per user per user namespace as well as interest expressed in making details about what is going on in the kernel more visible" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (28 commits) autofs: Fix automounts by using current_real_cred()->uid mnt: Add a per mount namespace limit on the number of mounts netns: move {inc,dec}_net_namespaces into #ifdef nsfs: Simplify __ns_get_path tools/testing: add a test to check nsfs ioctl-s nsfs: add ioctl to get a parent namespace nsfs: add ioctl to get an owning user namespace for ns file descriptor kernel: add a helper to get an owning user namespace for a namespace devpts: Change the owner of /dev/pts/ptmx to the mounter of /dev/pts devpts: Remove sync_filesystems devpts: Make devpts_kill_sb safe if fsi is NULL devpts: Simplify devpts_mount by using mount_nodev devpts: Move the creation of /dev/pts/ptmx into fill_super devpts: Move parse_mount_options into fill_super userns: When the per user per user namespace limit is reached return ENOSPC userns; Document per user per user namespace limits. mntns: Add a limit on the number of mount namespaces. netns: Add a limit on the number of net namespaces cgroupns: Add a limit on the number of cgroup namespaces ipcns: Add a limit on the number of ipc namespaces ...
-
- 06 10月, 2016 30 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs由 Linus Torvalds 提交于
Pull xfs and iomap updates from Dave Chinner: "The main things in this update are the iomap-based DAX infrastructure, an XFS delalloc rework, and a chunk of fixes to how log recovery schedules writeback to prevent spurious corruption detections when recovery of certain items was not required. The other main chunk of code is some preparation for the upcoming reflink functionality. Most of it is generic and cleanups that stand alone, but they were ready and reviewed so are in this pull request. Speaking of reflink, I'm currently planning to send you another pull request next week containing all the new reflink functionality. I'm working through a similar process to the last cycle, where I sent the reverse mapping code in a separate request because of how large it was. The reflink code merge is even bigger than reverse mapping, so I'll be doing the same thing again.... Summary for this update: - change of XFS mailing list to linux-xfs@vger.kernel.org - iomap-based DAX infrastructure w/ XFS and ext2 support - small iomap fixes and additions - more efficient XFS delayed allocation infrastructure based on iomap - a rework of log recovery writeback scheduling to ensure we don't fail recovery when trying to replay items that are already on disk - some preparation patches for upcoming reflink support - configurable error handling fixes and documentation - aio access time update race fixes for XFS and generic_file_read_iter" * tag 'xfs-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (40 commits) fs: update atime before I/O in generic_file_read_iter xfs: update atime before I/O in xfs_file_dio_aio_read ext2: fix possible integer truncation in ext2_iomap_begin xfs: log recovery tracepoints to track current lsn and buffer submission xfs: update metadata LSN in buffers during log recovery xfs: don't warn on buffers not being recovered due to LSN xfs: pass current lsn to log recovery buffer validation xfs: rework log recovery to submit buffers on LSN boundaries xfs: quiesce the filesystem after recovery on readonly mount xfs: remote attribute blocks aren't really userdata ext2: use iomap to implement DAX ext2: stop passing buffer_head to ext2_get_blocks xfs: use iomap to implement DAX xfs: refactor xfs_setfilesize xfs: take the ilock shared if possible in xfs_file_iomap_begin xfs: fix locking for DAX writes dax: provide an iomap based fault handler dax: provide an iomap based dax read/write path dax: don't pass buffer_head to copy_user_dax dax: don't pass buffer_head to dax_insert_mapping ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixups from David Miller: "Here are the build and merge fixups for the networking stuff" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: phy: micrel.c: Enable ksz9031 energy-detect power-down mode netfilter: merge fixup for "nf_tables_netdev: remove redundant ip_hdr assignment" netfilter: nft_limit: fix divided by zero panic netfilter: fix namespace handling in nf_log_proc_dostring netfilter: xt_hashlimit: Fix link error in 32bit arch because of 64bit division netfilter: accommodate different kconfig in nf_set_hooks_head netfilter: Fix potential null pointer dereference
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc updates from David Miller: "Besides some cleanups the major thing here is supporting relaxed ordering PCIe transactions on newer sparc64 machines, from Chris Hyser" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: fixing ident and beautifying code sparc64: Enable setting "relaxed ordering" in IOMMU mappings sparc64: Enable PCI IOMMU version 2 API sparc: migrate exception table users off module.h and onto extable.h
-
git://git.armlinux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM updates from Russell King: - Correct ARMs dma-mapping to use the correct printk format strings. - Avoid defining OBJCOPYFLAGS globally which upsets lkdtm rodata testing. - Cleanups to ARMs asm/memory.h include. - L2 cache cleanups. - Allow flat nommu binaries to be executed on ARM MMU systems. - Kernel hardening - add more read-only after init annotations, including making some kernel vdso variables const. - Ensure AMBA primecell clocks are appropriately defaulted. - ARM breakpoint cleanup. - Various StrongARM 11x0 and companion chip (SA1111) updates to bring this legacy platform to use more modern APIs for (eg) GPIOs and interrupts, which will allow us in the future to reduce some of the board-level driver clutter and elimate function callbacks into board code via platform data. There still appears to be interest in these platforms! - Remove the now redundant secure_flush_area() API. - Module PLT relocation optimisations. Ard says: This series of 4 patches optimizes the ARM PLT generation code that is invoked at module load time, to get rid of the O(n^2) algorithm that results in pathological load times of 10 seconds or more for large modules on certain STB platforms. - ARMv7M cache maintanence support. - L2 cache PMU support * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (35 commits) ARM: sa1111: provide to_sa1111_device() macro ARM: sa1111: add sa1111_get_irq() ARM: sa1111: clean up duplication in IRQ chip implementation ARM: sa1111: implement a gpio_chip for SA1111 GPIOs ARM: sa1111: move irq cleanup to separate function ARM: sa1111: use devm_clk_get() ARM: sa1111: use devm_kzalloc() ARM: sa1111: ensure we only touch RAB bus type devices when removing ARM: 8611/1: l2x0: add PMU support ARM: 8610/1: V7M: Add dsb before jumping in handler mode ARM: 8609/1: V7M: Add support for the Cortex-M7 processor ARM: 8608/1: V7M: Indirect proc_info construction for V7M CPUs ARM: 8607/1: V7M: Wire up caches for V7M processors with cache support. ARM: 8606/1: V7M: introduce cache operations ARM: 8605/1: V7M: fix notrace variant of save_and_disable_irqs ARM: 8604/1: V7M: Add support for reading the CTR with read_cpuid_cachetype() ARM: 8603/1: V7M: Add addresses for mem-mapped V7M cache operations ARM: 8602/1: factor out CSSELR/CCSIDR operations that use cp15 directly ARM: kernel: avoid brute force search on PLT generation ARM: kernel: sort relocation sections before allocating PLTs ...
-
git://git.armlinux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fix from Russell King: "A 5% error in delay calculation was introduced during the last merge window, which had gone un-noticed until yesterday" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: fix delays
-
由 Boris Ostrovsky 提交于
Early during boot topology_update_package_map() computes logical_pkg_ids for all present processors. Later, when processors are brought up, identify_cpu() updates these values based on phys_pkg_id which is a function of initial_apicid. On PV guests the latter may point to a non-existing node, causing logical_pkg_ids to be set to -1. Intel's RAPL uses logical_pkg_id (as topology_logical_package_id()) to index its arrays and therefore in this case will point to index 65535 (since logical_pkg_id is a u16). This could lead to either a crash or may actually access random memory location. As a workaround, we recompute topology during CPU bringup to reset logical_pkg_id to a valid value. (The reason for initial_apicid being bogus is because it is initial_apicid of the processor from which the guest is launched. This value is CPUID(1).EBX[31:24]) Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Russell King 提交于
-
由 Russell King 提交于
-
由 Russell King 提交于
Commit 215e362d ("ARM: 8306/1: loop_udelay: remove bogomips value limitation") tried to increase the bogomips limitation, but in doing so messed up udelay such that it always gives about a 5% error in the delay, even if we use a timer. The calculation is: loops = UDELAY_MULT * us_delay * ticks_per_jiffy >> UDELAY_SHIFT Originally, UDELAY_MULT was ((UL(2199023) * HZ) >> 11) and UDELAY_SHIFT 30. Assuming HZ=100, us_delay of 1000 and ticks_per_jiffy of 1660000 (eg, 166MHz timer, 1ms delay) this would calculate: ((UL(2199023) * HZ) >> 11) * 1000 * 1660000 >> 30 => 165999 With the new values of 2047 * HZ + 483648 * HZ / 1000000 and 31, we get: (2047 * HZ + 483648 * HZ / 1000000) * 1000 * 1660000 >> 31 => 158269 which is incorrect. This is due to a typo - correcting it gives: (2147 * HZ + 483648 * HZ / 1000000) * 1000 * 1660000 >> 31 => 165999 i.o.w, the original value. Fixes: 215e362d ("ARM: 8306/1: loop_udelay: remove bogomips value limitation") Cc: <stable@vger.kernel.org> Reviewed-by: NNicolas Pitre <nico@linaro.org> Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 netmonk@netmonk.org 提交于
Good evening, Following LinuxCodingStyle documentation and with the help of Sam, fixed severals identation issues in the code, and few others cosmetic changes And last and i hope least fixing my name :) Signed-off-by : Dominique Carrel <netmonk@netmonk.org> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Chris Hyser says: ==================== sparc64: PCIe performance enhancements Ver 2 is redone for 4.8 where commit 00085f1e changed DMA attributes from struct pointer to unsigned long. This set of patches initiates a series of PCIe performance enhancement patch submittals. Patch 1/2 enables version 2 of the SPARC sun4v IOMMU I/O address translation services need for subsequent enhancements. Patch 2/2 allows drivers to specify DMA_ATTR_WEAK_ORDERING via DMA attributes to the SPARC DMA mapping routines enabling "relaxed ordering" for the buffer being mapped. [Still relevant write-up] PCI-Express Relaxed Ordering and the Sun SPARC Enterprise M-class Servers https://blogs.oracle.com/olympus/entry/relaxed_ordering ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 chris hyser 提交于
Enable relaxed ordering for memory writes in IOMMU TSB entry from dma_4v_alloc_coherent(), dma_4v_map_page() and dma_4v_map_sg() when dma_attrs DMA_ATTR_WEAK_ORDERING is set. This requires PCI IOMMU I/O Translation Services version 2.0 API. Many PCIe devices allow enabling relaxed-ordering (memory writes bypassing other memory writes) for various DMA buffers. A notable exception is the Mellanox mlx4 IB adapter. Due to the nature of x86 HW this appears to have little performance impact there. On SPARC HW however, this results in major performance degradation getting only about 3Gbps. Enabling RO in the IOMMU entries corresponding to mlx4 data buffers increases the throughput to about 13 Gbps. Orabug: 19245907 Signed-off-by: NChris Hyser <chris.hyser@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 chris hyser 提交于
Enable Version 2 of the PCI IOMMU API needed for advanced features such as PCI Relaxed Ordering and greater than 2 GB DMA address space per root complex. Signed-off-by: NChris Hyser <chris.hyser@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Gortmaker 提交于
These files were only including module.h for exception table related functions. We've now separated that content out into its own file "extable.h" so now move over to that and avoid all the extra header content in module.h that we don't really need to compile these files. Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Looijmans 提交于
Set bit 0 in register 1C.23 to enable the EDPD feature of the KSZ9031 PHY. This reduces power consumption when the link is down. Signed-off-by: NMike Looijmans <mike.looijmans@topic.nl> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu由 Linus Torvalds 提交于
Pull m68knommu updates from Greg Ungerer: "The bulk of the changes here are to clean up the ColdFire 5441x SoC support so that it can run with MMU enabled. We have only supported it with MMU disabled up to now. There is also a few individual bug fixes across the ColdFire support code" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: let clk_disable() return immediately if clk is NULL m68knommu: convert printk(KERN_INFO) to pr_info() m68knommu: clean up uClinux boot log output m68k: generalize uboot command line support m68k: don't panic if no hardware FPU defined m68k: only generate FPU instructions if CONFIG_FPU enabled m68k: always make available dump_fpu() m68k: generalize io memory region setup for ColdFire ACR registers m68k: move ColdFire _bootmem_alloc code m68k: report correct FPU type on ColdFire MMU platforms m68k: set appropriate machine type for m5411x SoC platforms m68k: move CONFIG_FPU set to per-CPU configuration m68knommu: fix IO write size in nettel pin set m68knommu: switch to using IO access methods in WildFire board code m68knommu: fix early setup to not access variables
-
git://github.com/jcmvbkbc/linux-xtensa由 Linus Torvalds 提交于
Pull Xtensa updates from Max Filippov: "Updates for the xtensa architecture. It is a combined set of patches for 4.8 that never got to the mainline and new patches for 4.9. - add new kernel memory layouts for MMUv3 cores: with 256MB and 512MB KSEG size, starting at physical address other than 0 - make kernel load address configurable - clean up kernel memory layout macros - drop sysmem early allocator and switch to memblock - enable kmemleak and memory reservation from the device tree - wire up new syscalls: userfaultfd, membarrier, mlock2, copy_file_range, preadv2 and pwritev2 - add new platform: Cadence Configurable System Platform (CSP) and new core variant for it: xt_lnx - rearrange CCOUNT calibration code, make most of it generic - improve machine reset code (XTFPGA now reboots reliably with MMUv3 cores) - provide default memmap command line option for configurations without device tree support - ISS fixes: simdisk is now capable of using highmem pages, panic correctly terminates simulator" * tag 'xtensa-20161005' of git://github.com/jcmvbkbc/linux-xtensa: (24 commits) xtensa: disable MMU initialization option on MMUv2 cores xtensa: add default memmap and mmio32native options to defconfigs xtensa: add default memmap option to common_defconfig xtensa: add default memmap option to iss_defconfig xtensa: ISS: allow simdisk to use high memory buffers xtensa: ISS: define simc_exit and use it instead of inline asm xtensa: xtfpga: group platform_* functions together xtensa: rearrange CCOUNT calibration xtensa: xtfpga: use clock provider, don't update DT xtensa: Tweak xuartps UART driver Rx watermark for Cadence CSP config. xtensa: initialize MMU before jumping to reset vector xtensa: fix icountlevel setting in cpu_reset xtensa: extract common CPU reset code into separate function xtensa: Added Cadence CSP kernel configuration for Xtensa xtensa: fix default kernel load address xtensa: wire up new syscalls xtensa: support reserved-memory DT node xtensa: drop sysmem and switch to memblock xtensa: minimize use of PLATFORM_DEFAULT_MEM_{ADDR,SIZE} xtensa: cleanup MMU setup and kernel layout macros ...
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== Netfilter fixes for net-next This is a pull request to address fallout from previous nf-next pull request, only fixes going on here: 1) Address a potential null dereference in nf_unregister_net_hook() when becomes nf_hook_entry_head is NULL, from Aaron Conole. 2) Missing ifdef for CONFIG_NETFILTER_INGRESS, also from Aaron. 3) Fix linking problems in xt_hashlimit in x86_32, from Pai. 4) Fix permissions of nf_log sysctl from unpriviledge netns, from Jann Horn. 5) Fix possible divide by zero in nft_limit, from Liping Zhang. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging and IIO updates from Greg KH: "Here is the big staging and IIO driver pull request for 4.9-rc1. There are a lot of patches in here, the majority due to the drivers/staging/greybus/ subsystem being merged in with full development history that went back a few years, in order to preserve the work that those developers did over time. Lots and lots of tiny cleanups happened in the tree as well, due to the Outreachy application process and lots of other developers showing up for the first time to clean code up. Along with those changes, we deleted a wireless driver, and added a raspberrypi driver (currently marked broken), and lots of new iio drivers. Overall the tree still shrunk with more lines removed than added, about 10 thousand lines removed in total. Full details are in the very long shortlog below. All of this has been in the linux-next tree with no issues. There will be some merge problems with other subsystem trees, but those are all minor problems and shouldn't be hard to work out when they happen (MAINTAINERS and some lustre build problems with the IB tree)" And furter from me asking for clarification about greybus: "Right now there is a phone from Motorola shipping with this code (a slightly older version, but the same tree), so even though Ara is not alive in the same form, the functionality is happening. We are working with the developers of that phone to merge the newer stuff in with their fork so they can use the upstream version in future versions of their phone product line. Toshiba has at least one chip shipping in their catalog that needs/uses this protocol over a Unipro link, and rumor has it that there might be more in the future. There are also other users of the greybus protocols, there is a talk next week at ELC that shows how it is being used across a network connection to control a device, and previous ELC talks have showed the protocol stack being used over USB to drive embedded Linux boards. I've also talked to some people who are starting to work to add a host controller driver to control arduinos as the greybus PHY protocols are very useful to control a serial/i2c/spio/whatever device across a random physical link, as it is a way to have a self-describing device be attached to a host without needing manual configuration. So yes, people are using it, and there is still the chance that it will show up in a phone/laptop/tablet/whatever from Google in the future as well, the tech isn't dead, even if the original large phone project happens to be" * tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (3703 commits) Staging: fbtft: Fix bug in fbtft-core staging: rtl8188eu: fix double unlock error in rtw_resume_process() staging:r8188eu: remove GEN_MLME_EXT_HANDLER macro staging:r8188eu: remove GEN_DRV_CMD_HANDLER macro staging:r8188eu: remove GEN_EVT_CODE macro staging:r8188eu: remove GEN_CMD_CODE macro staging:r8188eu: remove pkt_newalloc member of the recv_buf structure staging:r8188eu: remove rtw_handle_dualmac declaration staging:r8188eu: remove (RGTRY|BSSID)_(OFT|SZ) macros staging:r8188eu: change rtl8188e_process_phy_info function argument type Staging: fsl-mc: Remove blank lines Staging: fsl-mc: Fix unaligned * in block comments Staging: comedi: Align the * in block comments Staging : ks7010 : Fix block comments warninig Staging: vt6655: Remove explicit NULL comparison using Coccinelle staging: rtl8188eu: core: rtw_xmit: Use macros instead of constants staging: rtl8188eu: core: rtw_xmit: Move constant of the right side staging: dgnc: Fix lines longer than 80 characters Staging: dgnc: constify attribute_group structures Staging: most: hdm-dim2: constify attribute_group structures ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound updates from Takashi Iwai: "Again the diffstat shows a widely distributed pattern at this cycle, as there've been many code cleanups and refactoring allover the places. Other than that, the development was relatively calm, and no big surprise shouldn't be expected. Here are some highlights: Core: - Sequencer code refactoring / documentation updates - TLV code moved to uapi, following some relevant cleanups USB-Audio: - Lots of LINE6 driver fixes / updates - DragonFly and TEAC device quirk updates HD-audio: - Usual fixupes for Dell, Lenovo and HP machines - Link-audio time reporting capability ASoC: - Large refactoring of simple-card code to be shared with rcar driver - Removal of some duplicated ops over lots of CODEC drivers - Again quite a few Intel SKL driver updates - New drivers for Nuvoton NAU88C10, Realtek RT5660 and RT5663" * tag 'sound-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (465 commits) ASoC: fsl: Fix lockups with recent cache changes ASoC: Intel: Skylake: fix memory leak of module on error exit path ASoC: rsnd: add SNDRV_PCM_TRIGGER_SUSPEND/RESUME ASoC: wm8960: remove usage of obsoleted TLV-related macro ASoC: rt5616: remove usage of obsoleted TLV-related macro ASoC: max9867: remove usage of obsoleted TLV-related macro ASoC: trivial: system spelling fix ASoC: da7219: fix inappropriate condition statement ASoC: tlv320aic31xx: do not declare support for mono DAI ASoC: stac9766: fix wrong usage of DECLARE_TLV_DB_LINEAR() ASoC: wm8991: remove unused variable ASoC: wm8991: fix wrong usage of DECLARE_TLV_DB_LINEAR() ASOC: tpa6130a2: add static qualifier for file local symbols ASoC: sst-bxt-rt298: fix obsoleted initializers for array ASoC: sst-bxt-da7219_max98357a: fix obsoleted initializers for array ASoC: rt5616: add static qualifier for file local symbols ASoC: arizona: Add output power up/down delays for speaker path ASoC: arizona: Add debug prints for output power up/down times ALSA: hda - Add the top speaker pin config for HP Spectre x360 ASoC: Intel: Add DMIC channel constraint for bxt machine ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux由 Linus Torvalds 提交于
Pull DeviceTree updates from Rob Herring: - update changeset documentation on locking to reflect current code - fix alphabetizing of vendor-prefixes.txt - add various vendor prefixes - add ESP8089 WiFi binding - add new variable sized array parsing functions * tag 'devicetree-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (21 commits) DT: irqchip: renesas-irqc: document R8A7743/5 support dt-bindings: Add Keith&Koep vendor prefix dt-bindings: add vendor prefix for Auvidea GmbH of: Add vendor prefix for Engicam s.r.l company devicetree: Add vendor-prefix for Silead Inc. devicetree: bindings: Add vendor prefix for Topeet. dt-bindings: Add summit vendor id of/platform: Initialise dev->fwnode appropriately of: Add array read functions with min/max size limits of: Make of_find_property_value_of_size take a length range dt: net: enhance DWC EQoS binding to support Tegra186 bindings: PCI: artpec: correct pci binding example Documentation: devicetree: Fix max77693 spelling errors dt: bindings: Add binding for ESP8089 wifi chips PCI: Xilinx NWL PCIe: Updating device tree documentation with prefetchable memory space Documentation: devicetree: spi: fix wrong spi-bus documentation dt-bindings: Add Japan Display Inc vendor id dt-bindings: vendor-prefixes: Add Sierra Wireless devicetree: Add vendor prefix for Shenzhen Sunchip Technology Co., Ltd devicetree: Sort vendor prefixes in alphabetical order ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio由 Linus Torvalds 提交于
Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.9 series: Subsystem improvements: - do away with the last users of the obsolete Kconfig options ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter always sounded like an item on a wishlist to Santa Claus to me). We can now select GPIOLIB and be done with it, for all archs. After some struggle it even work on UM. Not that it has GPIO, but if it wants to, it can select the library. - continued efforts to make drivers properly either tristate or bool. - introduce a warning for drivers assigning default triggers to their irqchip lines when probed from device tree, so we find and fix these ambigous drivers. It is agreed that in the OF config path, the device tree defines trigger characteristics. - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips. - we introduce the ability to mark certain IRQ lines as "unusable" as they can be taken by BIOS/firmware, unrouted in silicon and generally nasty if you use them, and such things. This is put to good use in the STMPE driver and also in the Cherryview pin control driver. - a new "mockup" virtual GPIO device that can be used for testing. The plan is to add unit tests under tools/* for exercising this device and verify that the kernel code paths are working as they should. - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was implicit all the time, but when people started building UM with allyesconfig or allmodconfig it exploded in their face. - move some stray bits of device tree and ACPI HW description callbacks down into their respective implementation silo. These were causing issues when compiling on !HAS_IOMEM as well, so now eventually UM compiles the GPIOLIB library if it wants to. New drivers: - new driver for the Aspeed GPIO front-end companion to the pin controller merged through the pin control tree. - new driver for the LP873x PMIC GPIO portions. - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900, TS-7970, TS-7990 and TS-4100. - new driver for the Broadcom BCM63xx series including BCM6338 and BCM6345. - new driver for the Intel WhiskeyCove PMIC GPIO. - new driver for the Allwinner AXP209 PMIC GPIO portions. - new driver for Diamond Systems 48 line GPIO-MM, another of these port-mapped I/O expansion cards. - support the STMicroelectronics STMPE1600 variant in the STMPE driver. Driver improvements: - the STMPE driver now supports rising/falling edge detection properly for IRQs. - the PCA954x will now fetch and enable its VCC regulator properly. - major rework of the PCA953x driver with the goal of eventually switching it over to use regmap and thus modernize it even more. - switch the IOP driver to use the generic MMIO GPIO library. - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver over to this subsystem from MFD, achieveing some separation of concerns" * tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits) gpio: add missing static inline gpio: OF: localize some gpiochip init functions gpio: acpi: separation of concerns gpio: OF: separation of concerns gpio: make memory-mapped drivers depend on HAS_IOMEM gpio: stmpe: use BIT() macro gpio: stmpe: forbid unused lines to be mapped as IRQs mfd/gpio: Move HTC GPIO driver to GPIO subsystem gpio: MAINTAINERS: Add an entry for GPIO mockup driver gpio/mockup: add virtual gpio device gpio: Added zynq specific check for special pins on bank zero gpio: axp209: Implement get_direction gpio: aspeed: remove redundant return value check gpio: loongson1: remove redundant return value check ARM: omap2: fix missing include gpio: tc3589x: fix up complaints on unsigned gpio: tc3589x: add .get_direction() and small cleanup gpio: f7188x: use gpiochip_get_data instead of container_of gpio: tps65218: use devm_gpiochip_add_data() for gpio registration gpio: aspeed: fix return value check in aspeed_gpio_probe() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.9 cycle. General improvements: - nicer debugfs output with one pin/config pair per line. - continued efforts to strictify module vs bool. - constification and similar from Coccinelle engineers. - return error from pinctrl_bind_pins() - pulling in the ability to selectively disable mapping of unusable IRQs from the GPIO subsystem. New drivers: - new driver for the Aspeed pin controller family: AST2400 (G4) and AST2500 (G5) are supported. These are used by OpenBMC on the IBM Witherspoon platform. - new subdriver for the Allwinner sunxi GR8. Driver improvements: - drop default IRQ trigger types assigned during IRQ mapping on AT91 and Nomadik. This error was identified by improvements in the IRQ core by Marc Zyngier. - active high/low types on the GPIO IRQs for the ST pin controller. - IRQ support on GPIOs on the STM32 pin controller. - Renesas Super-H/ARM sh-pfc: continued massive developments. - misc MXC improvements. - SPDIF on the Allwiner A31 SoC - IR remote and SPI NOR flash, NAND flash, I2C pins on the AMLogic SoC. - PWM pins on the Meson. - do not map unusable IRQs (taken by BIOS) on the Intel Cherryview. - add GPIO IRQ wakeup support to the Intel driver so we can wake up from button pushes. Deprecation: - delete the obsolete STiH415/6 SoC support" * tag 'pinctrl-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits) pinctrl: qcom: fix masking of pinmux functions pinctrl: intel: Configure GPIO chip IRQ as wakeup interrupts pinctrl: cherryview: Convert to use devm_gpiochip_add_data() pinctrl: cherryview: Do not add all southwest and north GPIOs to IRQ domain gpiolib: Make it possible to exclude GPIOs from IRQ domain pinctrl: nomadik: don't default-flag IRQs as falling pinctrl: st: Remove obsolete platforms from pinctrl-st dt doc pinctrl: st: Remove STiH415/6 SoC pinctrl driver support. pinctrl: amlogic: gxbb: add i2c pins pinctrl: amlogic: gxbb: add nand pins pinctrl: stm32: add IRQ_DOMAIN_HIERARCHY dependency pinctrl: amlogic: gxbb: add spi nor pins pinctrl: sh-pfc: r8a7794: Implement voltage switching for SDHI pinctrl: sh-pfc: r8a7791: Implement voltage switching for SDHI pinctrl: sh-pfc: Add PORT_GP_24 helper macro pinctrl: Fix "st,syscfg" definition for STM32 pinctrl driver: base: pinctrl: return error from pinctrl_bind_pins() pinctrl: meson-gxbb: add the missing SDIO interrupt pin pinctrl: aspeed: fix regmap error handling pinctrl: mediatek: constify gpio_chip structures ...
-
git://git.linaro.org/people/ulf.hansson/mmc由 Linus Torvalds 提交于
Pull MMC updates from Ulf Hansson: MMC core: - Add support for sending commands during data transfer - Erase/discard/trim improvements - Improved error handling - Extend sysfs with SD status register - Document info about the vmmc/vmmcq regulators - Extend pwrseq-simple to manage an optional post-power-on-delay - Some various minor improvements and cleanups MMC host: - dw_mmc: Add reset support - dw_mmc: Return -EILSEQ for EBE and SBE error - dw_mmc: Some cleanups - dw_mmc-k3: Add UHS-I support Hisilicon Hikey - tmio: Add eMMC support - sh_mobile_sdhi: Add r8a7796 support - sunxi: Don't use sample clocks for sun4i/sun5i - sunxi: Add support for A64 mmc controller - sunxi: Some cleanups and improvements - sdhci: Support for sending commands during data transfer - sdhci: Do not allow tuning procedure to be interrupted - sdhci-pci: Enable SD/SDIO on Merrifield - sdhci-pci|acpi: Enable MMC_CAP_CMD_DURING_TFR - sdhci-pci: Some cleanups - sdhci-of-arasan: Set controller to test mode when no CD bit - sdhci-of-arasan: Some fixes for clocks and phys - sdhci-brcmstb: Don't use ADMA 64-bit when not supported - sdhci-tegra: Mark 64-bit DMA broken on Tegra124 - sdhci-esdhc-imx: Fixups related to data timeouts * tag 'mmc-v4.9' of git://git.linaro.org/people/ulf.hansson/mmc: (68 commits) mmc: dw_mmc: remove the deprecated "supports-highspeed" property mmc: dw_mmc: minor cleanup for dw_mci_adjust_fifoth mmc: dw_mmc: use macro to define ring buffer size mmc: dw_mmc: fix misleading error print if failing to do DMA transfer mmc: dw_mmc: avoid race condition of cpu and IDMAC mmc: dw_mmc: split out preparation of desc for IDMAC32 and IDMAC64 mmc: core: don't try to switch block size for dual rate mode mmc: sdhci-of-arasan: Set controller to test mode when no CD bit dt: sdhci-of-arasan: Add device tree option xlnx, fails-without-test-cd mmc: tmio: add eMMC support mmc: rtsx_usb: use new macro for R1 without CRC mmc: rtsx_pci: use new macro for R1 without CRC mmc: add define for R1 response without CRC mmc: card: do away with indirection pointer mmc: sdhci-acpi: Set MMC_CAP_CMD_DURING_TFR for Intel eMMC controllers mmc: sdhci-pci: Set MMC_CAP_CMD_DURING_TFR for Intel eMMC controllers mmc: sdhci: Support cap_cmd_during_tfr requests mmc: mmc_test: Add tests for sending commands during transfer mmc: core: Add support for sending commands during data transfer mmc: sdhci-brcmstb: Fix incorrect capability ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse由 Linus Torvalds 提交于
Pull fuse updates from Miklos Szeredi: "This adds POSIX ACL permission checking to the fuse kernel module. In addition there are minor bug fixes as well as cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: limit xattr returned size fuse: remove duplicate cs->offset assignment fuse: don't use fuse_ioctl_copy_user() helper fuse_ioctl_copy_user(): don't open-code copy_page_{to,from}_iter() fuse: get rid of fc->flags fuse: use timespec64 fuse: don't use ->d_time fuse: Add posix ACL support fuse: handle killpriv in userspace fs fuse: fix killing s[ug]id in setattr fuse: invalidate dir dentry after chmod fuse: Use generic xattr ops fuse: listxattr: verify xattr list
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs由 Linus Torvalds 提交于
Pull misc filesystem and quota fixes from Jan Kara: "Some smaller udf, ext2, quota & reiserfs fixes" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext2: Unmap metadata when zeroing blocks udf: don't bother with full-page write optimisations in adinicb case reiserfs: Unlock superblock before calling reiserfs_quota_on_mount() udf: Remove useless check in udf_adinicb_write_begin() quota: fill in Q_XGETQSTAT inode information for inactive quotas ext2: Check return value from ext2_get_group_desc()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next由 Linus Torvalds 提交于
Pull networking updates from David Miller: 1) BBR TCP congestion control, from Neal Cardwell, Yuchung Cheng and co. at Google. https://lwn.net/Articles/701165/ 2) Do TCP Small Queues for retransmits, from Eric Dumazet. 3) Support collect_md mode for all IPV4 and IPV6 tunnels, from Alexei Starovoitov. 4) Allow cls_flower to classify packets in ip tunnels, from Amir Vadai. 5) Support DSA tagging in older mv88e6xxx switches, from Andrew Lunn. 6) Support GMAC protocol in iwlwifi mwm, from Ayala Beker. 7) Support ndo_poll_controller in mlx5, from Calvin Owens. 8) Move VRF processing to an output hook and allow l3mdev to be loopback, from David Ahern. 9) Support SOCK_DESTROY for UDP sockets. Also from David Ahern. 10) Congestion control in RXRPC, from David Howells. 11) Support geneve RX offload in ixgbe, from Emil Tantilov. 12) When hitting pressure for new incoming TCP data SKBs, perform a partial rathern than a full purge of the OFO queue (which could be huge). From Eric Dumazet. 13) Convert XFRM state and policy lookups to RCU, from Florian Westphal. 14) Support RX network flow classification to igb, from Gangfeng Huang. 15) Hardware offloading of eBPF in nfp driver, from Jakub Kicinski. 16) New skbmod packet action, from Jamal Hadi Salim. 17) Remove some inefficiencies in snmp proc output, from Jia He. 18) Add FIB notifications to properly propagate route changes to hardware which is doing forwarding offloading. From Jiri Pirko. 19) New dsa driver for qca8xxx chips, from John Crispin. 20) Implement RFC7559 ipv6 router solicitation backoff, from Maciej Żenczykowski. 21) Add L3 mode to ipvlan, from Mahesh Bandewar. 22) Support 802.1ad in mlx4, from Moshe Shemesh. 23) Support hardware LRO in mediatek driver, from Nelson Chang. 24) Add TC offloading to mlx5, from Or Gerlitz. 25) Convert various drivers to ethtool ksettings interfaces, from Philippe Reynes. 26) TX max rate limiting for cxgb4, from Rahul Lakkireddy. 27) NAPI support for ath10k, from Rajkumar Manoharan. 28) Support XDP in mlx5, from Rana Shahout and Saeed Mahameed. 29) UDP replicast support in TIPC, from Richard Alpe. 30) Per-queue statistics for qed driver, from Sudarsana Reddy Kalluru. 31) Support BQL in thunderx driver, from Sunil Goutham. 32) TSO support in alx driver, from Tobias Regnery. 33) Add stream parser engine and use it in kcm. 34) Support async DHCP replies in ipconfig module, from Uwe Kleine-König. 35) DSA port fast aging for mv88e6xxx driver, from Vivien Didelot. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1715 commits) mlxsw: switchx2: Fix misuse of hard_header_len mlxsw: spectrum: Fix misuse of hard_header_len net/faraday: Stop NCSI device on shutdown net/ncsi: Introduce ncsi_stop_dev() net/ncsi: Rework the channel monitoring net/ncsi: Allow to extend NCSI request properties net/ncsi: Rework request index allocation net/ncsi: Don't probe on the reserved channel ID (0x1f) net/ncsi: Introduce NCSI_RESERVED_CHANNEL net/ncsi: Avoid unused-value build warning from ia64-linux-gcc net: Add netdev all_adj_list refcnt propagation to fix panic net: phy: Add Edge-rate driver for Microsemi PHYs. vmxnet3: Wake queue from reset work i40e: avoid NULL pointer dereference and recursive errors on early PCI error qed: Add RoCE ll2 & GSI support qed: Add support for memory registeration verbs qed: Add support for QP verbs qed: PD,PKEY and CQ verb support qed: Add support for RoCE hw init qede: Add qedr framework ...
-
由 Johannes Weiner 提交于
Commit 22f2ac51 ("mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()") switched replace_page_cache() from raw radix tree operations to page_cache_tree_insert() but didn't take into account that the latter function, unlike the raw radix tree op, handles mapping->nrpages. As a result, that counter is bumped for each page replacement rather than balanced out even. The mapping->nrpages counter is used to skip needless radix tree walks when invalidating, truncating, syncing inodes without pages, as well as statistics for userspace. Since the error is positive, we'll do more page cache tree walks than necessary; we won't miss a necessary one. And we'll report more buffer pages to userspace than there are. The error is limited to fuse inodes. Fixes: 22f2ac51 ("mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()") Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
When the underflow checks were added to workingset_node_shadow_dec(), they triggered immediately: kernel BUG at ./include/linux/swap.h:276! invalid opcode: 0000 [#1] SMP Modules linked in: isofs usb_storage fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_REJECT nf_reject_ipv6 soundcore wmi acpi_als pinctrl_sunrisepoint kfifo_buf tpm_tis industrialio acpi_pad pinctrl_intel tpm_tis_core tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc dm_crypt CPU: 0 PID: 20929 Comm: blkid Not tainted 4.8.0-rc8-00087-gbe67d60b #1 Hardware name: System manufacturer System Product Name/Z170-K, BIOS 1803 05/06/2016 task: ffff8faa93ecd940 task.stack: ffff8faa7f478000 RIP: page_cache_tree_insert+0xf1/0x100 Call Trace: __add_to_page_cache_locked+0x12e/0x270 add_to_page_cache_lru+0x4e/0xe0 mpage_readpages+0x112/0x1d0 blkdev_readpages+0x1d/0x20 __do_page_cache_readahead+0x1ad/0x290 force_page_cache_readahead+0xaa/0x100 page_cache_sync_readahead+0x3f/0x50 generic_file_read_iter+0x5af/0x740 blkdev_read_iter+0x35/0x40 __vfs_read+0xe1/0x130 vfs_read+0x96/0x130 SyS_read+0x55/0xc0 entry_SYSCALL_64_fastpath+0x13/0x8f Code: 03 00 48 8b 5d d8 65 48 33 1c 25 28 00 00 00 44 89 e8 75 19 48 83 c4 18 5b 41 5c 41 5d 41 5e 5d c3 0f 0b 41 bd ef ff ff ff eb d7 <0f> 0b e8 88 68 ef ff 0f 1f 84 00 RIP page_cache_tree_insert+0xf1/0x100 This is a long-standing bug in the way shadow entries are accounted in the radix tree nodes. The shrinker needs to know when radix tree nodes contain only shadow entries, no pages, so node->count is split in half to count shadows in the upper bits and pages in the lower bits. Unfortunately, the radix tree implementation doesn't know of this and assumes all entries are in node->count. When there is a shadow entry directly in root->rnode and the tree is later extended, the radix tree implementation will copy that entry into the new node and and bump its node->count, i.e. increases the page count bits. Once the shadow gets removed and we subtract from the upper counter, node->count underflows and triggers the warning. Afterwards, without node->count reaching 0 again, the radix tree node is leaked. Limit shadow entries to when we have actual radix tree nodes and can count them properly. That means we lose the ability to detect refaults from files that had only the first page faulted in at eviction time. Fixes: 449dd698 ("mm: keep page cache radix tree nodes in check") Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reported-and-tested-by: NLinus Torvalds <torvalds@linux-foundation.org> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 10月, 2016 4 次提交
-
-
由 Sergei Shtylyov 提交于
Renesas RZ/G SoC have the R-Car gen2 compatible IRQC interrupt controllers. Document RZ/G1[ME] (also known as R8A774[35]) SoC bindings. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Marek Vasut 提交于
Add vendor prefix for Keith&Koep GmbH , http://keith-koep.com/en/Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> [robh: fix alphabetizing] Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Boris Ostrovsky 提交于
xen_cpuhp_setup() calls mutex_lock() which, when CONFIG_DEBUG_MUTEXES is defined, ends up calling xen_save_fl(). That routine expects per_cpu(xen_vcpu, 0) to be already initialized. Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Reported-by: NSander Eikelenboom <linux@eikelenboom.it> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 David S. Miller 提交于
Jiri Pirko says: ==================== mlxsw: Couple of fixes Couple of fixes from Yotam. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-