Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 15 9月, 2015 5 次提交
  3. 04 9月, 2015 1 次提交
  5. 13 8月, 2015 1 次提交
    • K
      perf callchain: Per-event type selection support · d457c963
      由 Kan Liang 提交于 
      This patchkit adds the ability to set callgraph mode (fp, dwarf, lbr) per
event. This in term can reduce sampling overhead and the size of the
perf.data.

Here is an example.

  perf record -e 'cpu/cpu-cycles,period=1000,call-graph=fp,time=1/,cpu/instructions,call-graph=lbr/' sleep 1

 perf evlist -v
 cpu/cpu-cycles,period=1000,call-graph=fp,time=1/: type: 4, size: 112,
 config: 0x3c, { sample_period, sample_freq }: 1000, sample_type:
 IP|TID|TIME|CALLCHAIN|PERIOD|IDENTIFIER, read_format: ID, disabled: 1,
 inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all:
 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
 cpu/instructions,call-graph=lbr/: type: 4, size: 112, config: 0xc0, {
 sample_period, sample_freq }: 4000, sample_type:
 IP|TID|TIME|CALLCHAIN|PERIOD|BRANCH_STACK|IDENTIFIER, read_format: ID,
 disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1,
 exclude_guest: 1
Signed-off-by: NKan Liang <kan.liang@intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1439289050-40510-1-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      d457c963
  7. 11 8月, 2015 1 次提交
  9. 07 8月, 2015 1 次提交
  11. 05 8月, 2015 1 次提交
  13. 30 7月, 2015 2 次提交
  15. 21 7月, 2015 2 次提交
    • W
      perf record: Allow filtering perf's pid via --exclude-perf · 4ba1faa1
      由 Wang Nan 提交于 
      This patch allows 'perf record' to exclude events issued by perf itself
by '--exclude-perf' option.

Before this patch, when doing something like:

 # perf record -a -e syscalls:sys_enter_write <cmd>

One could easily get result like this:

 # /tmp/perf report --stdio
 ...
  # Overhead  Command  Shared Object       Symbol
  # ........  .......  ..................  ....................
  #
      99.99%  perf     libpthread-2.18.so  [.] __write_nocancel
      0.01%   ls       libc-2.18.so        [.] write
      0.01%   sshd     libc-2.18.so        [.] write
 ...

Where most events are generated by perf itself.

A shell trick can be done to filter perf itself out:

 # cat << EOF > ./tmp
 > #!/bin/sh
 > exec perf record -e ... --filter="common_pid != \$\$" -a sleep 10
 > EOF
 # chmod a+x ./tmp
 # ./tmp

However, doing so is user unfriendly.

This patch extracts evsel iteration framework introduced by patch 'perf
record: Apply filter to all events in a glob matching' into
foreach_evsel_in_last_glob(), and makes exclude_perf() function append
new filter expression to each evsel selected by a '-e' selector.

To avoid losing filters if user pass '--filter' after '--exclude-perf',
this patch uses perf_evsel__append_filter() in both case, instead of
perf_evsel__set_filter() which removes old filter. As a side effect, now
it is possible to use multiple '--filter' option for one selector. They
are combinded with '&&'.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1436513770-8896-2-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      4ba1faa1
    • W
      perf record: Apply filter to all events in a glob matching · 15bfd2cc
      由 Wang Nan 提交于 
      There is an old problem in perf's filter applying which first posted at
Sep. 2014 at https://lkml.org/lkml/2014/9/9/944 that, if passing
multiple events in a glob matching expression in cmdline then add
'--filter' after them, the filter will be applied on only the last one.

For example:

 # dd if=/dev/zero of=/dev/null &
 [1] 464
 # perf record -a -e 'syscalls:sys_*_read' --filter 'common_pid != 464' sleep 0.1
 [ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 0.239 MB perf.data (2094 samples) ]
 # perf report --stdio | tee
 ...
 # Samples: 2K of event 'syscalls:sys_enter_read'
 # Event count (approx.): 2092
 ...
 # Samples: 2  of event 'syscalls:sys_exit_read'
 # Event count (approx.): 2
 ...

In this example, filter only applied on 'syscalls:sys_exit_read', and
there's no way to set filter for ''syscalls:sys_enter_read'.

This patch adds a 'cmdline_group_boundary' for 'struct evsel', and
apply filter on all events between two boundary marks.

After applying this patch:

 # perf record -a -e 'syscalls:sys_*_read' --filter 'common_pid != 464' sleep 0.1
 [ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 0.031 MB perf.data (3 samples) ]
 # perf report --stdio | tee
 ...
 # Samples: 1  of event 'syscalls:sys_enter_read'
 # Event count (approx.): 1
 ...
 # Samples: 2  of event 'syscalls:sys_exit_read'
 # Event count (approx.): 2
 ...
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Reported-by: NBrendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1436513770-8896-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      15bfd2cc
  17. 06 7月, 2015 1 次提交
  19. 26 6月, 2015 1 次提交
  21. 27 5月, 2015 2 次提交
  23. 29 4月, 2015 7 次提交
  25. 08 4月, 2015 1 次提交
  27. 28 2月, 2015 2 次提交
    • Y
      perf list: Clean up the printing functions of hardware/software events · 705750f2
      由 Yunlong Song 提交于 
      Do not need print_events_type or __print_events_type for listing hw/sw
events, let print_symbol_events do its job instead. Moreover,
print_symbol_events can also handle event_glob and name_only.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-4-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      705750f2
    • Y
      perf list: Sort the output of 'perf list' to view more clearly · ab0e4800
      由 Yunlong Song 提交于 
      Sort the output according to ASCII character list (using strcmp), which
supports both number sequence and alphabet sequence.

Example:

Before this patch:

 $ perf list

 List of pre-defined events (to be used in -e):
   cpu-cycles OR cycles                               [Hardware event]
   instructions                                       [Hardware event]
   cache-references                                   [Hardware event]
   cache-misses                                       [Hardware event]
   branch-instructions OR branches                    [Hardware event]
   branch-misses                                      [Hardware event]
   bus-cycles                                         [Hardware event]
   ...                                                ...

   jbd2:jbd2_start_commit                             [Tracepoint event]
   jbd2:jbd2_commit_locking                           [Tracepoint event]
   jbd2:jbd2_run_stats                                [Tracepoint event]
   block:block_rq_issue                               [Tracepoint event]
   block:block_bio_complete                           [Tracepoint event]
   block:block_bio_backmerge                          [Tracepoint event]
   block:block_getrq                                  [Tracepoint event]
   ...                                                ...

After this patch:

 $ perf list

 List of pre-defined events (to be used in -e):
   branch-instructions OR branches                    [Hardware event]
   branch-misses                                      [Hardware event]
   bus-cycles                                         [Hardware event]
   cache-misses                                       [Hardware event]
   cache-references                                   [Hardware event]
   cpu-cycles OR cycles                               [Hardware event]
   instructions                                       [Hardware event]
   ...                                                ...

   block:block_bio_backmerge                          [Tracepoint event]
   block:block_bio_complete                           [Tracepoint event]
   block:block_getrq                                  [Tracepoint event]
   block:block_rq_issue                               [Tracepoint event]
   jbd2:jbd2_commit_locking                           [Tracepoint event]
   jbd2:jbd2_run_stats                                [Tracepoint event]
   jbd2:jbd2_start_commit                             [Tracepoint event]
   ...                                                ...
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-2-git-send-email-yunlong.song@huawei.com
[ Don't forget closedir({sys,evt}_dir) when handling errors ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ab0e4800
  29. 13 2月, 2015 1 次提交
    • Y
      perf list: Place the header text in its right position · 619a303c
      由 Yunlong Song 提交于 
      The hearer text 'List of pre-defined events (to be used in -e):' is
placed in an improper function, which causes an abnormal output, e.g.
'perf list hw' shows no guiding text at all, and 'perf list hw
L1-dcache*' shows the guiding text incorrectly in the middle of the
output.

Example
Before this patch:

 $ perf list hw L1-dcache*

   branch-instructions OR branches                    [Hardware event]
   branch-misses                                      [Hardware event]
   bus-cycles                                         [Hardware event]
   cache-misses                                       [Hardware event]
   cache-references                                   [Hardware event]
   cpu-cycles OR cycles                               [Hardware event]
   instructions                                       [Hardware event]
   stalled-cycles-backend OR idle-cycles-backend      [Hardware event]
   stalled-cycles-frontend OR idle-cycles-frontend    [Hardware event]

 List of pre-defined events (to be used in -e):              <-- incorrect position
   L1-dcache-load-misses                              [Hardware cache event]
   L1-dcache-loads                                    [Hardware cache event]
   L1-dcache-prefetch-misses                          [Hardware cache event]
   L1-dcache-prefetches                               [Hardware cache event]
   L1-dcache-store-misses                             [Hardware cache event]
   L1-dcache-stores                                   [Hardware cache event]

After this patch:

 $ perf list hw L1-dcache*

 List of pre-defined events (to be used in -e):              <-- correct position

   branch-instructions OR branches                    [Hardware event]
   branch-misses                                      [Hardware event]
   bus-cycles                                         [Hardware event]
   cache-misses                                       [Hardware event]
   cache-references                                   [Hardware event]
   cpu-cycles OR cycles                               [Hardware event]
   instructions                                       [Hardware event]
   stalled-cycles-backend OR idle-cycles-backend      [Hardware event]
   stalled-cycles-frontend OR idle-cycles-frontend    [Hardware event]

   L1-dcache-load-misses                              [Hardware cache event]
   L1-dcache-loads                                    [Hardware cache event]
   L1-dcache-prefetch-misses                          [Hardware cache event]
   L1-dcache-prefetches                               [Hardware cache event]
   L1-dcache-store-misses                             [Hardware cache event]
   L1-dcache-stores                                   [Hardware cache event]
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1423833115-11199-8-git-send-email-yunlong.song@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      619a303c
  31. 07 2月, 2015 1 次提交
  33. 22 1月, 2015 1 次提交
  35. 03 12月, 2014 1 次提交
  37. 25 11月, 2014 2 次提交
  39. 16 10月, 2014 2 次提交
  41. 02 10月, 2014 1 次提交
  43. 30 9月, 2014 1 次提交
  45. 18 9月, 2014 2 次提交
    • A
      perf tools: Let default config be defined for a PMU · dc0a6202
      由 Adrian Hunter 提交于 
      This allows default config terms to be provided for a PMU. So, for
example, when the Intel PT PMU is added, it will be possible to specify:

	intel_pt//

which will be the same as:

	intel_pt/tsc=1,noretcomp=0/

meaning that the trace should contain TSC timestamps and perform 'return
compression'.

An important consideration of this patch is that it must be possible to
overwrite the default values.  That has meant changing the logic so that
a zero value can replace a non-zero value.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-7-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      dc0a6202
    • A
      perf tools: Let a user specify a PMU event without any config terms · ad962273
      由 Adrian Hunter 提交于 
      This enables a PMU event to be specified in the form:

	pmu//

which is effectively the same as:

	pmu/config=0/

This patch is a precursor to defining default config for a PMU.

Further explanation extracted from lkml thread:

Imagine that the 'tsc' term did not exist.

Intel PT trace data would not contain TSC packets, and the decoder would
not know how to decode them.

Then imagine that a new version of the hardware adds 'tsc'.

It is such a useful feature that we want it by default, but older
versions of the tools don't know how to decode it, so the kernel cannot
turn it on by default.

It is similar to why the kernel does not select perf_event_attr.mmap2 by
default.

The kernel doesn't know whether the tool supports it.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1408129739-17368-6-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ad962273