There are 43 includes of asm/mach-types.h by files that don't
reference anything from that file.  Remove these unnecessary
includes.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

No file should be explicitly referencing its own platform headers
by specifying an absolute include path.  Fix these paths to use
standard <asm/arch/...> includes.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move platform independent header files to arch/arm/include/asm, leaving
those in asm/arch* and asm/plat* alone.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Claim the initrd memory exclusively, and order other memory
reservations beforehand.  This allows us to determine whether
the initrd memory was overwritten, and disable the initrd in
that case.

This avoids a 'bad page state' bug.
Tested-by: NRalph Siemsen <ralphs@netwinder.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

(20072fd0 lost most of its changes
somehow, came from a mbox archive applied with git-am.  No idea
what happened.  This puts back the missing bits.  --rmk)

The initial patch from Lothar, and Lennert make it into a cleaner
one, modified and tested on PXA320 by Eric Miao.

This patch moves the L2 cache operations out of proc-xsc3.S into
dedicated outer cache support code.

CACHE_XSC3L2 can be deselected so no L2 cache specific code will be
linked in, and that L2 enable bit will not be set, this applies to
the following cases:

    a. _only_ PXA300/PXA310 support included and no L2 cache wanted
    b. PXA320 support included, but want L2 be disabled

So the enabling of L2 depends on two things:

    - CACHE_XSC3L2 is selected
    - and L2 cache is present

Where the latter is only a safeguard (previous testing shows it works
OK even when this bit is turned on).

IXP series of processors with XScale3 cannot disable L2 cache for the
moment since they depend on the L2 cache for its coherent memory, so
IXP may always select CACHE_XSC3L2.

Other L2 relevant bits are always turned on (i.e. the original code
enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side
effects. Specifically, these bits are:

   - OC bits in TTBASE register (table walk outer cache attributes)
   - LLR Outer Cache Attributes (OC) in Auxiliary Control Register
Signed-off-by: NLothar WaÃ&lt;9f&gt;mann <LW@KARO-electronics.de>
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

struct at91_nand has been renamed atmel_nand. Fix the four boards that
were added since the patch was created.
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: NAndrew Victor <linux@maxim.org.za>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Export missing Clock API symbols.
Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Remove not needed export and fix warning:

WARNING: vmlinux.o(__ksymtab+0x400): Section mismatch in reference from the variable __ksymtab_set_imx_fb_info to the function .init.text:set_imx_fb_info()
The symbol set_imx_fb_info is exported and annotated __init
Fix this by removing the __init annotation of set_imx_fb_info or drop the export.
Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
Acked-by: NPavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

It seems this small label was lost in the last merge. Without it
no CPU type is selected for the MX2 family of processors. And a build
will fail badly...
Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

commit 3e970473 ("x86: boot secondary
cpus through initial_code") causes the kernel to crash when a CPU is
brought online after the read only sections have been write
protected. The write to initial_code in do_boot_cpu() fails.

Move inital_code to .cpuinit.data section.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NH. Peter Anvin <hpa@zytor.com>

Minor cleanups for the MMC/SD support on avr32:

 - Make at32_add_device_mci() properly initialize "missing"
   platform data ... so boards like STK1002 won't try GPIO 0.

 - Switch over to gpio_is_valid() instead of testing for only
   one designated value.

 - Provide STK1002 platform data for the unlikely case that
   switches are set so first Ethernet controller isn't in use.
   (That's the only way to get card detect and writeprotect
   switch sensing on the STK1000.)

And get rid of one "unused variable" warning.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>

The shared mmap code works fine for the test case, which only checked
for two shared maps of the same file.  However, three shared maps
result in one mapping remaining cached, resulting in stale data being
visible via that mapping.  Fix this.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

When guest invalidates a large tlb map, there may be more than one
corresponding shadow tlb maps that need to be invalidated. Use eaddr and eend
to find these shadow tlb maps.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

IRQT_* and __IRQT_* were obsoleted long ago by patch [3692/1].
Remove them completely. Sed script for the reference:

s/__IRQT_RISEDGE/IRQ_TYPE_EDGE_RISING/g
s/__IRQT_FALEDGE/IRQ_TYPE_EDGE_FALLING/g
s/__IRQT_LOWLVL/IRQ_TYPE_LEVEL_LOW/g
s/__IRQT_HIGHLVL/IRQ_TYPE_LEVEL_HIGH/g
s/IRQT_RISING/IRQ_TYPE_EDGE_RISING/g
s/IRQT_FALLING/IRQ_TYPE_EDGE_FALLING/g
s/IRQT_BOTHEDGE/IRQ_TYPE_EDGE_BOTH/g
s/IRQT_LOW/IRQ_TYPE_LEVEL_LOW/g
s/IRQT_HIGH/IRQ_TYPE_LEVEL_HIGH/g
s/IRQT_PROBE/IRQ_TYPE_PROBE/g
s/IRQT_NOEDGE/IRQ_TYPE_NONE/g
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The lctl(g) instructions require a specific alignment for the parameters.
The architecture requires a specification program check if these alignments
are not used. Enforcing this alignment also removes a possible host BUG,
since the get_guest functions check for proper alignment and emits a BUG.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Lets fix the name for the lctlg instruction...
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The current interrupt handling on s390 misbehaves on an error case. On s390
each cpu has the prefix area (lowcore) for interrupt delivery. This memory
must always be available. If we fail to access the prefix area for a guest
on interrupt delivery the configuration is completely unusable. There is no
point in sending another program interrupt to an inaccessible lowcore.
Furthermore, we should not bug the host kernel, because this can be triggered
by userspace. I think the guest kernel itself can not trigger the problem, as
SET PREFIX and SIGNAL PROCESSOR SET PREFIX both check that the memory is
available and sane. As this is a userspace bug (e.g. setting the wrong guest
offset, unmapping guest memory) we should kill the userspace process instead
of BUGing the host kernel.
In the long term we probably should notify the userspace process about this
problem.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

All registers are unsigned long types. This patch changes all occurences
of guestaddr in gaccess from u64 to unsigned long.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

KVM_CAP_USER_MEMORY is used by s390, therefore, we should advertise it.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

There is a call to local_irq_restore in the normal exit case, so it would
seem that there should be one on an error return as well.

The semantic patch that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression l;
expression E,E1,E2;
@@

local_irq_save(l);
... when != local_irq_restore(l)
    when != spin_unlock_irqrestore(E,l)
    when any
    when strict
(
if (...) { ... when != local_irq_restore(l)
               when != spin_unlock_irqrestore(E1,l)
+   local_irq_restore(l);
    return ...;
}
|
if (...)
+   {local_irq_restore(l);
    return ...;
+   }
|
spin_unlock_irqrestore(E2,l);
|
local_irq_restore(l);
)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

As well as move set base/mask ptes to vmx_init().
Signed-off-by: NSheng Yang <sheng.yang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NSheng Yang <sheng.yang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

If 'g' is one then limit is 4kb granular.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

When an event (such as an interrupt) is injected, and the stack is
shadowed (and therefore write protected), the guest will exit.  The
current code will see that the stack is shadowed and emulate a few
instructions, each time postponing the injection.  Eventually the
injection may succeed, but at that time the guest may be unwilling
to accept the interrupt (for example, the TPR may have changed).

This occurs every once in a while during a Windows 2008 boot.

Fix by unshadowing the fault address if the fault was due to an event
injection.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

There is no guarantee that the old TSS descriptor in the GDT contains
the proper base address. This is the case for Windows installation's
reboot-via-triplefault.

Use guest registers instead. Also translate the address properly.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The segment base is always a linear address, so translate before
accessing guest memory.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

If NPT is enabled after loading both KVM modules on AMD and it should be
disabled, both KVM modules must be reloaded. If only the architecture module is
reloaded the behavior is undefined. With this patch it is possible to disable
NPT only by reloading the kvm_amd module.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

* do not pass nameidata; struct path is all the callers want.
* switch to new helpers:
	user_path_at(dfd, pathname, flags, &path)
	user_path(pathname, &path)
	user_lpath(pathname, &path)
	user_path_dir(pathname, &path)  (fail if not a directory)
  The last 3 are trivial macro wrappers for the first one.
* remove nameidata in callers.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NIan Molton <spyro@f2s.com>

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().
Signed-off-by: NJohannes Weiner <hannes@saeurebad.de>
Acked-by: NMikael Starvik <starvik@axis.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()

where show_mem() calls show_free_areas().
Signed-off-by: NJohannes Weiner <hannes@saeurebad.de>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free swap pages, printed by show_swap_cache_info()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().
Signed-off-by: NJohannes Weiner <hannes@saeurebad.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().
Signed-off-by: NJohannes Weiner <hannes@saeurebad.de>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().
Signed-off-by: NJohannes Weiner <hannes@saeurebad.de>
Acked-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

And show_mem() does now actually print something on configurations
with multiple nodes.
Signed-off-by: NJohannes Weiner <hannes@saeurebad.de>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().
Signed-off-by: NJohannes Weiner <hannes@saeurebad.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().
Signed-off-by: NJohannes Weiner <hannes@saeurebad.de>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>