Following the model of 'perf sched':

. raw_field_value searches first on the common fields, that are unused
  in this tool

. Using perf_session__set_tracepoints_handlers will save all those
  strcmp to find the right handler at sample processing time, do it just
  once and get the handler from evsel->handler.func.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Using plain raw_field_value(evsel->tp_format) will look at the common
fields as well, and since this tool doesn't need those, speed it up a
bit by looking at just the event specific fields.

Also in general use just evsel and sample, just like was done in 'perf
sched'.

v2: Fixed up test against evsel->name, that contains the subsys name
too, by David Ahern.

Cc: David Ahern <dsahern@gmail.com>
Cc: Dong Hao <haodong@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add 'perf kvm stat' support to analyze kvm vmexit/mmio/ioport smartly

Usage:
- kvm stat
  run a command and gather performance counter statistics, it is the alias of
  perf stat

- trace kvm events:
  perf kvm stat record, or, if other tracepoints are interesting as well, we
  can append the events like this:
  perf kvm stat record -e timer:* -a

  If many guests are running, we can track the specified guest by using -p or
  --pid, -a is used to track events generated by all guests.

- show the result:
  perf kvm stat report

The output example is following:
13005
13059

total 2 guests are running on the host

Then, track the guest whose pid is 13059:
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.253 MB perf.data.guest (~11065 samples) ]

See the vmexit events:

Analyze events for all VCPUs:

             VM-EXIT    Samples  Samples%     Time%         Avg time

         APIC_ACCESS        460    70.55%     0.01%     22.44us ( +-   1.75% )
                 HLT         93    14.26%    99.98% 832077.26us ( +-  10.42% )
  EXTERNAL_INTERRUPT         64     9.82%     0.00%     35.35us ( +-  14.21% )
   PENDING_INTERRUPT         24     3.68%     0.00%      9.29us ( +-  31.39% )
           CR_ACCESS          7     1.07%     0.00%      8.12us ( +-   5.76% )
      IO_INSTRUCTION          3     0.46%     0.00%     18.00us ( +-  11.79% )
       EXCEPTION_NMI          1     0.15%     0.00%      5.83us ( +-   -nan% )

Total Samples:652, Total events handled time:77396109.80us.

See the mmio events:

Analyze events for all VCPUs:

         MMIO Access    Samples  Samples%     Time%         Avg time

        0xfee00380:W        387    84.31%    79.28%      8.29us ( +-   3.32% )
        0xfee00300:W         24     5.23%     9.96%     16.79us ( +-   1.97% )
        0xfee00300:R         24     5.23%     7.83%     13.20us ( +-   3.00% )
        0xfee00310:W         24     5.23%     2.93%      4.94us ( +-   3.84% )

Total Samples:459, Total events handled time:4044.59us.

See the ioport event:

Analyze events for all VCPUs:

      IO Port Access    Samples  Samples%     Time%         Avg time

         0xc050:POUT          3   100.00%   100.00%     13.75us ( +-  10.83% )

Total Samples:3, Total events handled time:41.26us.

And, --vcpu is used to track the specified vcpu and --key is used to sort the
result:

Analyze events for VCPU 0:

             VM-EXIT    Samples  Samples%     Time%         Avg time

                 HLT         27    13.85%    99.97% 405790.24us ( +-  12.70% )
  EXTERNAL_INTERRUPT         13     6.67%     0.00%     27.94us ( +-  22.26% )
         APIC_ACCESS        146    74.87%     0.03%     21.69us ( +-   2.91% )
      IO_INSTRUCTION          2     1.03%     0.00%     17.77us ( +-  20.56% )
           CR_ACCESS          2     1.03%     0.00%      8.55us ( +-   6.47% )
   PENDING_INTERRUPT          5     2.56%     0.00%      6.27us ( +-   3.94% )

Total Samples:195, Total events handled time:10959950.90us.
Signed-off-by: NDong Hao <haodong@linux.vnet.ibm.com>
Signed-off-by: NRunzhen Wang <runzhen@linux.vnet.ibm.com>
[ Dong Hao <haodong@linux.vnet.ibm.com>
  Runzhen Wang <runzhen@linux.vnet.ibm.com>:
     - rebase it on current acme's tree
     - fix the compiling-error on i386 ]
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1347870675-31495-4-git-send-email-haodong@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Exporting KVM exit information to userspace to be consumed by perf.
Signed-off-by: NDong Hao <haodong@linux.vnet.ibm.com>
[ Dong Hao <haodong@linux.vnet.ibm.com>: rebase it on acme's git tree ]
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Acked-by: NMarcelo Tosatti <mtosatti@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1347870675-31495-2-git-send-email-haodong@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Parallel builds of perf were failing for me on a 32p box, with:

    * new build flags or prefix
util/pmu.l:7:23: error: pmu-bison.h: No such file or directory

...

make: *** [util/pmu-flex.o] Error 1
make: *** Waiting for unfinished jobs....

This can pretty quickly be seen by adding a sleep in front of the bison
calls in tools/perf/Makefile and running make -j4 on a smaller box i.e.:

	sleep 10; $(QUIET_BISON)$(BISON) -v util/pmu.y -d -o $(OUTPUT)util/pmu-bison.c

Adding the following dependencies fixes it for me.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/505BD190.40707@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Got tired of not getting the event that caused the perf_event_open()
syscall to fail. So I fixed the error message. This is very useful when
monitoring lots of events in a single run.
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120920161945.GA7064@quadSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch fix a compile warning taken as error:

	CC util/map.o
	cc1: warnings being treated as errors
	util/map.c: In function ‘map__fprintf_dsoname’:
	util/map.c:240: error: ‘dsoname’ may be used uninitialized in this function
	make: *** [util/map.o] Error 1
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1346053107-11946-3-git-send-email-feng.tang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

On my x86_32 mahcine, there is a compile error:

        CC util/scripting-engines/trace-event-perl.o
        cc1: warnings being treated as errors
        util/scripting-engines/trace-event-perl.c: In function
	perl_process_tracepoint:
        util/scripting-engines/trace-event-perl.c:285: error: format
	expects type 'int', but argument 2 has type '__u64'
        make: *** [util/scripting-engines/trace-event-perl.o] Error 1

Fix it by using the "%PRIu64" for __u64.

v2: use PRIu64 as suggested by Arnaldo.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120828101730.6b2fd97e@feng-i7Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The test should be >= ARRAY_SIZE() instead of > ARRAY_SIZE().
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20120905123126.GC6128@elgon.mountainSigned-off-by: NIngo Molnar <mingo@kernel.org>

Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core

Pull uprobes fixes + cleanups from Oleg Nesterov.
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from  Arnaldo Carvalho de Melo:

 * Fix handling of unresolved samples when --symbols is used in 'report',
   from Feng Tang.

 * Add --symbols to 'script', similar to the one in 'report', from Feng Tang.

 * Add union member access support to 'probe', from Hyeoncheol Lee.

 * Make 'archive' work on Android, tweaking some of the utility parameters
   used (tar, rm), from Irina Tirdea.

 * Fixups to die() removal, from Namhyung Kim.

 * Render fixes for the TUI, from Namhyung Kim.

 * Don't enable annotation in non symbolic view, from Namhyung Kim.

 * Fix pipe mode in 'report', from Namhyung Kim.

 * Move related stats code from stat to util/, will be used by the 'stat'
   kvm tool, from Xiao Guangrong.

 * Add cpumask for uncore pmu, use it in 'stat', from Yan, Zheng.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

If user doesn't explicitly specify CPU list, perf-stat only collects
events on CPUs listed in the PMU cpumask file.
Signed-off-by: N"Yah, Zheng" <zheng.z.yan@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1347263631-23175-3-git-send-email-zheng.z.yan@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch adds a cpumask file to the uncore pmu sysfs directory.  The
cpumask file contains one active cpu for every socket.
Signed-off-by: N"Yan, Zheng" <zheng.z.yan@intel.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: "Yan, Zheng" <zheng.z.yan@intel.com>
Link: http://lkml.kernel.org/r/1347263631-23175-2-git-send-email-zheng.z.yan@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The perf_hpp__init() function was only called from setup_browser() so
that the pipe-mode missed the initialization thus didn't respond to
related options.  Fix it.
Reported-by: NRobert Richter <robert.richter@amd.com>
Tested-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-tip-commits@vger.kernel.org
Link: http://lkml.kernel.org/r/87txv28spl.fsf_-_@sejong.aot.lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that other perf commands/browser has a way to dig out the available
scripts info in system, this is a preparation for the script browser.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1347007349-3102-5-git-send-email-feng.tang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that event_analyzing_sample.py can be shown by "perf script -l"
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1347007349-3102-4-git-send-email-feng.tang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since perf script no longer only handle the trace points, we can add the
symbol filter option so that scripts can handle specified samples.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1347007349-3102-3-git-send-email-feng.tang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Report/top commands support to only handle specific symbols with
"--symbols" option, but current code will keep those samples whose
symbol can't be resolved, which should actually be filtered.

If we run following commands:
$perf record -a tree
$perf report --symbols intel_idle -n
the output will be:

Without the patch:
==================
    46.27%        156     sshd  [unknown]
    26.05%         48  swapper  [kernel.kallsyms]
    17.26%         38     tree  libc-2.12.1.so
     7.69%         17     tree  tree
     2.73%          6     tree  ld-2.12.1.so

With the patch:
===============
   100.00%         48  swapper  [kernel.kallsyms]
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1347007349-3102-2-git-send-email-feng.tang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

On some systems, tar needs to specify the name of the archive immediately
after the -f parameter.

Change the order of the parameters so tar can run properly.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1347574063-22521-5-git-send-email-irina.tirdea@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In Android, rm does not support the -f parameter.

Remove -f from rm and make sure rm does not fail even if the files to be
removed are not found.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1347574063-22521-4-git-send-email-irina.tirdea@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Then, the code can be shared between kvm events and perf stat.
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
[ Dong Hao <haodong@linux.vnet.ibm.com>: rebase it on acme's git tree ]
Signed-off-by: NDong Hao <haodong@linux.vnet.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: kvm@vger.kernel.org
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1347870675-31495-3-git-send-email-haodong@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The integrated annotation feature is supported only in TUI mode.  Also
it should be enabled with 'symbol' sort key otherwise resulting hist
entry doesn't need to have same symbol as of a sample so that it can
fail on hist_entry__inc_addr_samples with -ERANGE.

You can easily see it when start perf report TUI without symbol* sort
key.  This patch fixes the problem.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1347611729-16994-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The sort__has_sym variable is for checking whether the sort_list
includes 'symbol' as a sort key.  It will be used for later patch.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1347611729-16994-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Make arch_uprobe_task->saved_trap_nr "unsigned int" and move it down
after ->saved_scratch_register, this changes sizeof() from 24 to 16.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

arch_uprobe_disable_step() should also take UTASK_SSTEP_TRAPPED into
account. In this case the probed insn was not executed, we need to
clear X86_EFLAGS_TF if it was set by us and that is all.

Again, this code will look more clean when we move it into
arch_uprobe_post_xol() and arch_uprobe_abort_xol().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

arch_uprobe_disable_step() correctly preserves X86_EFLAGS_TF and
returns to user-mode. But this means the application gets SIGTRAP
only after the next insn.

This means that UPROBE_CLEAR_TF logic is not really right. _enable
should only record the state of X86_EFLAGS_TF, and _disable should
check it separately from UPROBE_FIX_SETF.

Remove arch_uprobe_task->restore_flags, add ->saved_tf instead, and
change enable/disable accordingly. This assumes that the probed insn
was not trapped, see the next patch.

arch_uprobe_skip_sstep() logic has the same problem, change it to
check X86_EFLAGS_TF and send SIGTRAP as well. We will cleanup this
all after we fold enable/disable_step into pre/post_hol hooks.

Note: send_sig(SIGTRAP) is not actually right, we need send_sigtrap().
But this needs more changes, handle_swbp() does the same and this is
equally wrong.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

user_enable/disable_single_step() was designed for ptrace, it assumes
a single user and does unnecessary and wrong things for uprobes. For
example:

	- arch_uprobe_enable_step() can't trust TIF_SINGLESTEP, an
	  application itself can set X86_EFLAGS_TF which must be
	  preserved after arch_uprobe_disable_step().

	- we do not want to set TIF_SINGLESTEP/TIF_FORCED_TF in
	  arch_uprobe_enable_step(), this only makes sense for ptrace.

	- otoh we leak TIF_SINGLESTEP if arch_uprobe_disable_step()
	  doesn't do user_disable_single_step(), the application will
	  be killed after the next syscall.

	- arch_uprobe_enable_step() does access_process_vm() we do
	  not need/want.

Change arch_uprobe_enable/disable_step() to set/clear X86_EFLAGS_TF
directly, this is much simpler and more correct. However, we need to
clear TIF_BLOCKSTEP/DEBUGCTLMSR_BTF before executing the probed insn,
add set_task_blockstep(false).

Note: with or without this patch, there is another (hopefully minor)
problem. A probed "pushf" insn can see the wrong X86_EFLAGS_TF set by
uprobes. Perhaps we should change _disable to update the stack, or
teach arch_uprobe_skip_sstep() to emulate this insn.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

Afaics the usage of update_debugctlmsr() and TIF_BLOCKSTEP in
step.c was always very wrong.

1. update_debugctlmsr() was simply unneeded. The child sleeps
   TASK_TRACED, __switch_to_xtra(next_p => child) should notice
   TIF_BLOCKSTEP and set/clear DEBUGCTLMSR_BTF after resume if
   needed.

2. It is wrong. The state of DEBUGCTLMSR_BTF bit in CPU register
   should always match the state of current's TIF_BLOCKSTEP bit.

3. Even get_debugctlmsr() + update_debugctlmsr() itself does not
   look right. Irq can change other bits in MSR_IA32_DEBUGCTLMSR
   register or the caller can be preempted in between.

4. It is not safe to play with TIF_BLOCKSTEP if task != current.
   DEBUGCTLMSR_BTF and TIF_BLOCKSTEP should always match each
   other if the task is running. The tracee is stopped but it
   can be SIGKILL'ed right before set/clear_tsk_thread_flag().

However, now that uprobes uses user_enable_single_step(current)
we can't simply remove update_debugctlmsr(). So this patch adds
the additional "task == current" check and disables irqs to avoid
the race with interrupts/preemption.

Unfortunately this patch doesn't solve the last problem, we need
another fix. Probably we should teach ptrace_stop() to set/clear
single/block stepping after resume.

And afaics there is yet another problem: perf can play with
MSR_IA32_DEBUGCTLMSR from nmi, this obviously means that even
__switch_to_xtra() has problems.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

No functional changes, preparation for the next fix and for uprobes
single-step fixes.

Move the code playing with TIF_BLOCKSTEP/DEBUGCTLMSR_BTF into the
new helper, set_task_blockstep().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

The arch specific implementation behaves like user_enable_single_step()
except that it does not disable single stepping if it was already
enabled by ptrace. This allows the debugger to single step over an
uprobe. The state of block stepping is not restored. It makes only sense
together with TF and if that was enabled then the debugger is notified.

Note: this is still not correct. For example, TIF_SINGLESTEP check
is not right, the application itself can set X86_EFLAGS_TF. And otoh
we leak TIF_SINGLESTEP (set by enable) if the probed insn is "popf".
See the next patches, we need the changes in arch/x86/kernel/step.c
first.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

As Oleg pointed out in [0] uprobe should not use the ptrace interface
for enabling/disabling single stepping.

[0] http://lkml.kernel.org/r/20120730141638.GA5306@redhat.com

Add the new "__weak arch" helpers which simply call user_*_single_step()
as a preparation. This is only needed to not break the powerpc port, we
will fold this logic into arch_uprobe_pre/post_xol() hooks later.

We should also change handle_singlestep(), _disable_step(&uprobe->arch)
should be called before put_uprobe().
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

The wrong MMF_HAS_UPROBES doesn't really hurt, just it triggers
the "slow" and unnecessary handle_swbp() path if the task hits
the non-uprobe breakpoint.

So this patch changes find_active_uprobe() to check every valid
vma and clear MMF_HAS_UPROBES if no uprobes were found. This is
adds the slow O(n) path, but it is only called in unlikely case
when the task hits the normal breakpoint first time after
uprobe_unregister().

Note the "not strictly accurate" comment in mmf_recalc_uprobes().
We can fix this, we only need to teach vma_has_uprobes() to return
a bit more more info, but I am not sure this worth the trouble.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

Add the new MMF_RECALC_UPROBES flag, it means that MMF_HAS_UPROBES
can be false positive after remove_breakpoint() or uprobe_munmap().
It is also set by uprobe_dup_mmap(), this is not optimal but simple.
We could add the new hook, uprobe_dup_vma(), to set MMF_HAS_UPROBES
only if the new mm actually has uprobes, but I don't think this
makes sense.

The next patch will use this flag to clear MMF_HAS_UPROBES.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

Nobody plays with uprobes_tree/uprobes_treelock in interrupt context,
no need to disable irqs.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

alloc_uprobe() might return a NULL pointer, put_uprobe() can't deal with
this.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

As a side effect of commit f5951d56 ("perf hists browser: Use
perf_hpp__format functions") perf report TUI got a problem of not
refreshing the first character.

Since the previous patch restores the column width of "overhead" to 7
we can start at column 0 now.
Reported-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1347431706-7839-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Current hpp format functions assume that the output will fit to 6
character including % sign (XX.YY%) so used "%5.2f%%" as a format
string.  However it might be the case if collapsing resulted in a single
entry which has 100.00% (7 character) of period. In this case the output
will be shifted by 1 character.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1347431706-7839-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For the reasons stated on:

  commit 0a84f007
  Author: David Daney <david.daney@cavium.com>

    perf tools: Fix broken build by defining _GNU_SOURCE in Makefile
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-e2nofbmj4uf0ykgsytxvt9pu@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The commit a116e05d ("perf sched: Remove die() calls") replaced
die() call to pr_debug + return -1, but it should be pr_err otherwise
it'll not show up unless -v option is given.  Fix it.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1347415866-303-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The commit 32c7f738 ("perf test: Remove die() calls") replaced die()
call to pr_debug + return -1, but it should be pr_err otherwise it'll
not show up unless -v option is given.  Fix it.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1347415866-303-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>