Currently, a single lock serialises access to CPU PMU registers. This
global locking is unnecessary as PMU registers are local to the CPU
they monitor.

This patch replaces the global lock with a per-CPU lock. As the lock is
in struct cpu_hw_events, PMUs providing a single cpu_hw_events instance
can be locked globally.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NJamie Iles <jamie@jamieiles.com>
Reviewed-by: NAshwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

As armpmu_disable will call armpmu->stop when the last event has been
removed, this is pointless and simply adds to the noise when debugging.
Additionally, due to this call occurring in a preemptible context, this
is problematic for per-cpu locking of PMU registers (where we will
attempt to access per-cpu spinlock for use with raw_spin_lock_irqsave).

This patch removes the call to armpmu->stop.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NJamie Iles <jamie@jamieiles.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Currently, cpu_hw_events is a global per-CPU variable. To enable
support for multiple PMUs, there needs to be a mapping from an instance
of arm_pmu to its cpu_hw_events. Additionally, as system PMUs are not
CPU-affine, they should not have this stored per-CPU.

This patch moves access to the hardware events data behind an accessor
function (arm_pmu::get_hw_events). This allows each instance to have
its own hardware event data, which can be stored per-CPU or globally as
required.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NJamie Iles <jamie@jamieiles.com>
Reviewed-by: NAshwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Currently the ARM perf code supports having a single struct
platform_device to supply IRQ numbers, limiting it to supporting a
single PMU.

This patch makes a platform_device instance variable on struct arm_pmu.
This should allow for multiple PMUs to be supported in future.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NJamie Iles <jamie@jamieiles.com>
Reviewed-by: NAshwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

This patch moves the active_events counter into struct arm_pmu, in
preparation for supporting multiple PMUs. This also moves
pmu_reserve_mutex, as it is used to guard accesses to active_events.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NJamie Iles <jamie@jamieiles.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Currently, pmu_hw_events::active_mask is used to keep track of which
events are active in hardware. As we can stop counters and their
interrupts, this is unnecessary.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NJamie Iles <jamie@jamieiles.com>
Reviewed-by: NAshwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Currently, event group validation compares each event's 'pmu' pointer
against the static 'pmu' pointer. This limits the code to supporting
only 1 PMU.

This patch changes the behaviour to consider an event's group leader's
'pmu' pointer as canonical for validation. This should ease later
generalisation of the code to support multiple PMUs at once.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NJamie Iles <jamie@jamieiles.com>
Reviewed-by: NAshwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Currently, an "empty" struct pmu is registered as the CPU PMU,
regardless of whether there is a physical PMU. This burdens the
accessor functions with checks to see whether a PMU is actually
present.

This patch changes initialisation to register a PMU only if there is a
supported PMU present, and removes the checks that this change makes
redundant.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NJamie Iles <jamie@jamieiles.com>
Reviewed-by: NAshwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The Cortex-A15 PMU implements the PMUv2 specification and therefore
has support for some mode exclusion.

This patch adds support for excluding user, kernel and hypervisor counts
from a given event.
Acked-by: NJamie Iles <jamie@jamieiles.com>
Reviewed-by: NJean Pihet <j-pihet@ti.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Modern PMUs allow for mode exclusion, so we no longer wish to return
-EPERM if it is requested.

This patch provides a hook in the armpmu structure for implementing
mode exclusion. The hw_perf_event initialisation is slightly delayed so
that the backend code can update the structure if required.
Acked-by: NJamie Iles <jamie@jamieiles.com>
Reviewed-by: NJean Pihet <j-pihet@ti.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

ARM PMU code used to use 1-based indices for PMU registers. This caused
several data structures (pmu_hw_events::{active_events, used_mask, events})
to have an unused element at index zero. ARMPMU_MAX_HWEVENTS still takes
this indexing into account, and currently equates to 33.

This patch updates the core ARM perf code to use the 0th index again.
Acked-by: NJamie Iles <jamie@jamieiles.com>
Reviewed-by: NJean Pihet <j-pihet@ti.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Now that the ARMv7 PMU backend indexes event counters from zero, follow
suit and do the same for ARMv6 and Xscale.
Acked-by: NJamie Iles <jamie@jamieiles.com>
Reviewed-by: NJean Pihet <j-pihet@ti.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The current ARMv7 PMU backend indexes event counters from two, with
index zero being reserved and index one being used to represent the
cycle counter.

This patch tidies up the code by indexing from one instead (with zero
for the cycle counter). This allows us to remove many of the accessor
macros along with the counter enumeration and makes the code much more
readable.
Acked-by: NJamie Iles <jamie@jamieiles.com>
Reviewed-by: NJean Pihet <j-pihet@ti.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

This patch ensures that integers are used to represent event indices in
the ARMv7 PMU backend. This ensures consistency between functions and
also with the arm_pmu structure.
Acked-by: NJamie Iles <jamie@jamieiles.com>
Reviewed-by: NJean Pihet <j-pihet@ti.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The ARMv7 perf backend mixes up u32 and unsigned long, which is rather
ugly.

This patch makes the ARMv7 PMU code consistently use the u32 type
instead.
Acked-by: NJamie Iles <jamie@jamieiles.com>
Reviewed-by: NJean Pihet <j-pihet@ti.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Commit 5dfc54e0 ("ARM: GIC: avoid routing interrupts to offline CPUs")
prevents the GIC from setting the affinity of an IRQ to a CPU with
id >= nr_cpu_ids. This was previously abused by perf on some platforms
where more IRQs were registered than possible CPUs.

This patch fixes the problem by using a cpumask_t to keep track of the
active (requested) interrupts in perf. The same effect could be achieved
by limiting the number of IRQs to the number of CPUs, but using a mask
instead will be useful for adding extended CPU hotplug support in the
future.
Acked-by: NJamie Iles <jamie@jamieiles.com>
Reviewed-by: NJean Pihet <j-pihet@ti.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Once upon a time, OProfile and Perf fought hard over who could play with
the PMU. To stop all hell from breaking loose, pmu.c offered an internal
reserve/release API and took care of parsing PMU platform data passed in
from board support code.

Now that Perf has ingested OProfile, let's move the platform device
handling into the Perf driver and out of the PMU locking code.
Unfortunately, the lock has to remain to prevent Perf being bitten by
out-of-tree modules such as LTTng, which still claim a right to the PMU
when Perf isn't looking.
Acked-by: NJamie Iles <jamie@jamieiles.com>
Reviewed-by: NJean Pihet <j-pihet@ti.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

This patch removes const qualifiers from instances of struct arm_pmu,
and functions initialising them, in preparation for generalising
arm_pmu usage to system (AKA uncore) PMUs.

This will allow for dynamically modifiable structures (locks,
struct pmu) to be added as members of struct arm_pmu.
Acked-by: NJamie Iles <jamie@jamieiles.com>
Reviewed-by: NJean Pihet <j-pihet@ti.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

These were missed in commit f5b94099 "All Arch: remove linkage
for sys_nfsservctl system call" due to them having no sys_ prefix
(presumably).

Cc: NeilBrown <neilb@suse.de>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-parisc@vger.kernel.org
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NJames Bottomley <James.Bottomley@hansenpartnership.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On Sun4d systems running in SMP mode, IRQ 14 is used for timer interrupts
and has a specialized interrupt handler. IPI is currently set to use IRQ 14
as well, which causes it to trigger the timer interrupt handler, and not the
IPI interrupt handler.

The IPI interrupt is therefore changed to IRQ 13, which is the highest
normally handled interrupt. This IRQ is also used for SBUS interrupts,
however there is nothing in the IPI/SBUS interrupt handlers that indicate
that they will not handle sharing the interrupt.
(IRQ 13 is indicated as audio interrupt, which is unlikely to be found in a
sun4d system)
Signed-off-by: NKjetil Oftedal <oftedal@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add clock control support for sh7372 CMT hardware blocks.

No upstream sh7372 boards are making use of CMT3 + CMT4,
but the sh7372 hardware happens to come out of reset with
all CMT MSTP clocks _enabled_, so to save power we need
to implement a fix in software to shut down unused clocks.

This patch relies on the recently merged

 794d78fe drivers: sh: late disabling of clocks V2

to make sure the unused clocks get disabled as expected.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add clock control support for sh7372 MSIOF hardware blocks.

No upstream sh7372 boards are making use of MSIOF0->2,
but the sh7372 hardware happens to come out of reset with
all MSIOF MSTP clocks _enabled_, so to save power we need
to implement a fix in software to shut down unused clocks.

This patch relies on the recently merged

 794d78fe drivers: sh: late disabling of clocks V2

to make sure the unused clocks get disabled as expected.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

USB-DMAC1 needs SMSTPCR4/MSTP407 controls, not MSTP214
this patch tested on mackerel board
Reported-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

MAINCKSEL is [29:28], not [27:24]
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch removes support for the SGX interrupt source in
the sh7372 INTCS controller.

The SGX hardware block included in sh7372 is already hooked
up to the ARM Cortex-A8 core using the INTCA controller,
so SGX users are encouraged to make use of that interrupt
source instead.

Removing support for the SGX interrupt source in INTCS
simplifies the sh7372 power management code by allowing
us to assume that only INTCA needs to be powered on to
operate the SGX hardware.

If the INTCS interrupt source would be kept then the kernel
would be forced to deal with additional dependencies that does
not follow the regular power domain hiearachy. With this
patch in place we can safely power down INTCS while the
SGX is operating.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Fix the following build errors:

  CC      arch/sh/kernel/cpu/sh4a/setup-sh7757.o
arch/sh/kernel/cpu/sh4a/setup-sh7757.c:681: error: implicit declaration of function ‘DMA_BIT_MASK’
arch/sh/kernel/cpu/sh4a/setup-sh7757.c:681: error: initializer element is not constant
arch/sh/kernel/cpu/sh4a/setup-sh7757.c:681: error: (near initialization for ‘usb_ehci_device.dev.coherent_dma_mask’)
arch/sh/kernel/cpu/sh4a/setup-sh7757.c:705: error: initializer element is not constant
arch/sh/kernel/cpu/sh4a/setup-sh7757.c:705: error: (near initialization for ‘usb_ohci_device.dev.coherent_dma_mask’)
make[3]: *** [arch/sh/kernel/cpu/sh4a/setup-sh7757.o] Error 1
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This adds unaligned memory access support for the following instructions:
  mov.w @(disp,PC),Rn
  mov.l @(disp,PC),Rn

These instructions are often used on SH2A toolchains.
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch just clears the return code for those cases where an
unaligned memory access occurs on branch instructions without a
delay slot.
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

For ARMv7 kernels running in the non-secure world, writing to the
auxillary control register causes an abort, so we must avoid directly
writing the auxillary control register.  If the ACR has already been
reinitialized by SoC code, don't try to restore it.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add a dsb after the isb to ensure that the previous writes to the
CP15 registers take effect before we enable the MMU.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

ARM920 and ARM926 save four registers, not three.  Fix the size of
the suspend region required.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

r1 stores the v:p offset from the CPU invariant resume code, and is
expected to be preserved by the CPU specific code.  Overwriting it is
not a good idea.

We've managed to get away with it on sa1100 platforms because most
happen to have PHYS_OFFSET == PAGE_OFFSET, but that may not be the
case depending on kernel configuration.  So fix this latent bug.

This fixes xsc3 as well which was saving and restoring this register
independently.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

cpu_v7_reset disables the MMU and then branches to the provided address.
On Thumb-2 kernels, we should take care to clear the Thumb Exception
enable bit in the System Control Register, otherwise this may wreak
havok in the code to which we are branching (for example, an ARM kernel
image via kexec).
Reviewed-by: NDave Martin <dave.martin@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit 540b5738 ("ARM: 6999/1: head, zImage: Always Enter the kernel in
ARM state") mandates that the kernel should be entered in ARM state.

If a Thumb-2 kernel kexecs a new kernel image, we need to ensure that
we change state when branching to the new code. This patch replaces a
mov pc, lr with a bx lr on Thumb-2 kernels so that we transition to ARM
state if need be.
Reviewed-by: NDave Martin <dave.martin@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch updates the recently submitted
"Associate the HDMI clock together with LCDC1 on sh7372"
to V2 with the following change:
 - Use lcdc1_device on AP4EVB to build properly.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

The nfsservctl system call is now gone, so we should remove all
linkage for it.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

According to the SFI specification irq number 0xFF means device has no
interrupt or interrupt attached via GPIO.

Currently, we don't handle this special case and set irq field in
*_board_info structs to 255.  It leads to confusion in some drivers.
Accelerometer driver tries to register interrupt 255, fails and prints
"Cannot get IRQ" to dmesg.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This bug causes the IECSR register clear failure.  In this case, the RETE
(retry error threshold exceeded) interrupt will be generated and cannot be
cleared.  So the related ISR may be called persistently.

The RETE bit in IECSR is cleared by writing a 1 to it.
Signed-off-by: NLiu Gang <Gang.Liu@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the following build errors:

  drivers/tty/serial/8250_early.c:160: error: 'BASE_BAUD' undeclared (first use in this function): 1 errors in 1 logs
  drivers/tty/serial/8250_early.c:37:24: error: asm/serial.h: No such file or directory: 1 errors in 1 logs

I am not sure if (1843200 / 16) is suitable for cris, but most other
arch's define it as this value.
Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>