Nothing the user (nor we) really can do about this, but upsets a nice
quiet boot.

Note that this happens mostly on SDVs where OEMs obviously haven't had
a chance yet to appropriately trim the output list.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65988Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
[danvet: Amend commit message a bit to clarify a question from Paulo.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Two exactly same error messages on different error paths makes debugging
difficult. Clarify the messages and distinguish them from each other.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Both intel_opregion_enable_asle() and intel_enable_asle() have shrunk
considerably. Merge them together into a static function in i915_irq.c,
and rename to better reflect the purpose and the related platforms.

No functional changes.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Stop calling intel_opregion_enable_asle() and consequently
intel_enable_asle() on opregion init. It should not be necessary for
these reasons:

1) On PCH split platforms, it only enables GSE interrupt, which is
   enabled in irq postinstall anyway. Moreover, the irq enable uses the
   wrong bit on IVB+.

2) On gen 2, it would enable a reserved pipestat bit. If there were gen
   2 systems with opregion asle support, that is. And the gen 2 irq
   handler won't handle it anyway.

3) On gen 3-4, the irq postinstall will call
   intel_opregion_enable_asle() to enable the pipestat.

In short, move the asle irq/pipestat enable responsibility to irq
postinstall, which already happens to be in place.

This should not cause any functional changes, but only do the one line
change here for easier bisectability, just in case, and leave all the
cleanups this allows to followup patches.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Only set ASLE driver readiness (ARDY) and technology enabled indicator
(TCHE) once per opregion init. There should be no need to do that at irq
postinstall time. Also clear driver readiness at fini.

While at it, add defines for driver readiness.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move near other defines, add TCHE in the name. No functional changes.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With the previous work asle and gse interrupt handlers should now be
functionally the same. Drop the duplicated code.

v2: Drop intel_opregion_gse_intr() also in the !CONFIG_ACPI path. (Damien)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In theory, the BIOS should not even request these from us now that we
aren't claiming we support these, but when it does anyway, don't pretend it
succeeded. It should be the right thing to do, but might confuse the BIOS.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In theory, this should prevent the BIOS from requesting them from us, and
this should be the right thing.

In practice, this is not always the case, and might surprise the BIOS.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In preparation of adding locking to backlight, make max backlight value
(the modulation frequency the PWM duty cycle value must not exceed)
internal to intel_panel.c.

Have intel_panel_set_backlight() accept a caller defined range for level,
and scale input to max backlight value internally.

Clean up intel_panel_get_max_backlight() and usage internally.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch updates the internal operations of acpi_device_set_id()
to setup acpi_device_pnp without using acpi_device.  There is no
functional change to acpi_device_set_id() in this patch.

acpi_pnp_type is added to acpi_device_pnp, so that PNPID type is
self-contained within acpi_device_pnp.  acpi_add_id(), acpi_bay_match(),
acpi_dock_match(), acpi_ibm_smbus_match() and acpi_is_video_device()
are changed to take acpi_handle as an argument, instead of acpi_device.
Signed-off-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

acpi_bus_get_device() returns int not acpi_status.

The patch change not to apply ACPI_FAILURE() to the return value of
acpi_bus_get_device().
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Convert #include "..." to #include <path/...> in drivers/gpu/.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NDave Airlie <airlied@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDave Jones <davej@redhat.com>

Make it easier to track backlight set requests coming through ASLE instead
of the driver's own backlight sysfs interface. We've had enough of
backlight issues to warrant some extra debug logs in the area.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is rather a hack to fix brightness hotkeys on a Clevo laptop. CADL is not
used anywhere in the driver code at the moment, but it could be used in BIOS as
is the case with the Clevo laptop.

The Clevo B7130 requires the CADL field to contain at least the ID of
the LCD device. If this field is empty, the ACPI methods that are called
on pressing brightness / display switching hotkeys will not trigger a
notification. As a result, it appears as no hotkey has been pressed.

Reference: https://bugs.freedesktop.org/show_bug.cgi?id=45452Tested-by: NPeter Wu <lekensteyn@gmail.com>
Signed-off-by: NPeter Wu <lekensteyn@gmail.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Almost all of the errors related __iomem problems.

Most of the changes here are trivial, however there is plenty of chance
for yank/paste errors.
Signed-off-by: NBen Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Use a more current logging style.  Ensure that appropriate
logging messages are prefixed with "i915: ".

Convert printks to pr_<level>.  Align arguments.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Various issues involved with the space character were generating
warnings in the checkpatch.pl file. This patch removes most of those
warnings.
Signed-off-by: NAkshay Joshi <me@akshayjoshi.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Not all systems expose a firmware or platform mechanism for changing the backlight intensity on i915, so add native driver support.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: NSedat Dilek <sedat.dilek@googlemail.com>
Tested-by: NMichel Alexandre Salim <salimma@fedoraproject.org>
Tested-by: NKamal Mostafa <kamal@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

opregion-based platforms will send ACPI video event 0x80 for a range of
notification types for legacy compatibility. This is interpreted as a
display switch event, which may not be appropriate in the circumstances.
When we receive such an event we should make sure that the platform is
genuinely requesting a display switch before passing that event through
to userspace.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Tested-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

The opregion is a shared memory region between ACPI and the graphics
driver. As the ACPI mapping has been changed to cachable in commit
6d5bbf00, mapping the intel opregion
non-cachable now fails. As no bus-master hardware is involved in the
opregion, cachable map should do no harm.

Tested on a Fujitsu Lifebook P8010.
Signed-off-by: NMichael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
[ickle: convert to acpi_os_ioremap for consistency]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Admittedly, trusting ACPI or the BIOS at all to be correct is littered
with numerous examples where it is wrong. Maybe, just maybe, we will
have better luck using the ACPI OpRegion lid status...
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

The bulk of the change is to convert the growing list of rings into an
array so that the relationship between the rings and the semaphore sync
registers can be easily computed.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

In case of an opregion signature mismatch in intel_opregion_setup(),
iounmap the correct address.
Signed-off-by: NChristoph Fritz <chf.fritz@googlemail.com>
Cc: stable@kernel.org
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

There were two instances of code to control the panel backlight and
neither handled the complete set of device variations.

Fixes:

  Bug 29716 - [GM965] Regression: Backlight resets to minimum when changing resolution
  https://bugs.freedesktop.org/show_bug.cgi?id=29716

And a bug on one of my PineView boxes which overflowed the backlight
value.

Incorporates part of a similar patch by Matthew Garrett that exposes a
native Intel backlight controller.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

It is recommended that we use the Video BIOS tables that were copied
into the OpRegion during POST when initialising the driver. This saves
us from having to furtle around inside the ROM ourselves and possibly
allows the vBIOS to adjust the tables prior to initialisation.

On some systems, such as the Samsung N210, there is no accessible VBIOS
and the only means of finding the VBT is through the OpRegion.

v2: Rearrange the code so that ASLE is enabled along with ACPI
v3: Enable OpRegion parsing even without ACPI
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>

It's part of the generic Intel driver infrastructure so rename it in
prepreparation for using it for VBT.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

If i915 opregion is present, the acpi_video driver doesn't register
itself immediately; it defers that until the i915 opregion code is done.
But if that *fails*, the acpi_video driver was never getting registered.
And thus I have no backlight support on my Lenovo IdeaPad S10-3.

Call acpi_video_register() on the failure path, and it works again.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: NMatthew Garrett <mjg@redhat.com>

Within i915_opregion.c there are two blocks of semantically identical
ASLE response codes defined. Only one of those matches the ACPI IGD
OpRegion Specification 0.1, use those.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NMatthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

we used to set the DIDL in the output device detected order.
But some BIOSes requires it to be initialized in the ACPI device order.
e.g. the value of the first field in DIDL stands for the first
ACPI video output device in ACPI namespace.

Now we initialize the DIDL using the device id, i.e. _ADR return value,
of each ACPI video device, if it is not 0.
https://bugzilla.kernel.org/show_bug.cgi?id=15054Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

IGD* isn't a useful name.  Replace with the codenames, as sourced from
pci.ids.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
[anholt: Fixed up for merge with pineview/ironlake changes]
Signed-off-by: NEric Anholt <eric@anholt.net>

Add the support of ACPI opregion on Ironlake so that the backlight
brightness can be adjusted by using ACPI interface
   >/sys/class/backlight/acpi_video0/brightness
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Tested-by: NZhao Yakui <yakui.zhao@intel.com>
[zhenyuw: cleanups, fix typo for checking GSE irq and convert to
current irq handling logic.]
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Replace the DRM_DEBUG with DRM_DEBUG_DRIVER in generic i915 driver.
Then the debug info can be obtained by adding the boot option of
"drm.debug=0x02".

At the same time the debug info in increase/decrease clock is also
printed by using DRM_DEBUG_DRIVER instead of DRM_DEBUG_KMS.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

BLC_PWM_CTL2 is for 965+ only, so add device model check for
legacy backlight control.

For native backlight control, it maps the backlight value (0~255)
in opregion ASLE[BCLP] to backlight duty cycle (0~max_backlight)
and set into control register.

It also add support for IGD device, which follows opregion spec.
Signed-off-by: NLi Peng <peng.li@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Sometimes both acpi video and i915 driver are compiled as modules.
And there exists the strict dependency between the two drivers.
The acpi video bus will be unloaded in course of unloading the i915 driver.
If we unload the acpi video driver, then the kernel oops will be triggered.

Add the reference count to avoid unloading the ACPI video bus twice.
The reference count should be checked before unregistering the acpi video bus.
If the reference count is already zero, it won't unregister it again.
And after the acpi video bus is already unregistered, the reference count
will be set to zero.

http://bugzilla.kernel.org/show_bug.cgi?id=13396Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Acked-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The ACPI video driver defers registration to the i915 driver if the
system supports opregion-mediated backlight control. This registration
was only being performed in the KMS case. Ensure it's done even if we
don't have modesetting enabled.

http://bugzilla.kernel.org/show_bug.cgi?id=13048Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The changes to opregion initialisation order meant that the ASLE setup
code might not be run at the correct time. Ensure that the interrupts are
set up.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

The i915 DRM triggers registration of the ACPI video driver on load. It
should unregister it at unload in order to avoid generating backtraces on
being reloaded.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

The ACPI video driver defers registration to the i915 driver if the
system supports opregion-mediated backlight control. This registration
was only being performed in the KMS case. Ensure it's done even if we
don't have modesetting enabled.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>