Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Cc: Daniel Mack <daniel@caiaq.de>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Cc: Magnus Damm <damm@opensource.se>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Cc: Mathias Nyman <mathias.nyman@nokia.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Cc: Peter Meerwald <p.meerwald@bct-electronic.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Cc: Kim Kyuwon <q1.kim@samsung.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Cc: Eric Miao <eric.miao@canonical.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Cc: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Cc: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Cc: Simon Guinot <sguinot@lacie.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

devm_kzalloc() makes cleanup simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

devm_kzalloc() makes code cleanup simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

devm_kzalloc() makes cleanup simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

devm_kzalloc() makes cleanup simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

module_platform_driver() makes the code simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Signed-off-by: NPeter Meerwald <p.meerwald@bct-electronic.com>
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

The s3c2410_gpio* calls are obsolete and have been scheduled for
removal since several kernel releases. Remove them and use common
gpiolib API instead.
This patch also adds gpio_request/gpio_free call for API corectness.

It is a prerequisite for removal of the S3C24XX SoC specific
arch/arm/plat-samsung/include/gpio-fns.h header.

Tested on Micro2440-SDK.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Use the device managed resource API for simplifying
the error/driver remove paths.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

the platform_set_drvdata (pdev, NULL) to be set at the remove of the
driver, as we have set the platform data to led at probe.
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Using devm_kzalloc will remove all the error checks and the frees are automatically done at the driver unload side.
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Inside the error handling in lp5523_init_led(), there is a place that
calls to led_classdev_unregister().  When we unregister the LED drivers,
it tries to set the brightness to OFF.  In this driver setting the
brightness is done through a work queue and the work queue hasn't been
initialized yet.

The result is that we trigger a WARN_ON() in the __queue_work().

The fix is to move the INIT_WORK() in front of the call to
lp5523_init_led().

Matt Renzelmann found this using a bug finding tool.
Reported-by: NMatt Renzelmann <mjr@cs.wisc.edu>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

LM3556 :
The LM3556 is a 4 MHz fixed-frequency synchronous boost
converter plus 1.5A constant current driver for a high-current white LED.
Datasheet: www.national.com/ds/LM/LM3556.pdf

Tested on OMAP4430

(bryan.wu@canonical.com: use module_i2c_driver() rather than
lm3556_init/lm3556_exit for code simplicity; fixed some typo
pointed out by Rob Landley)
Signed-off-by: NG.Shark Jeong <gshark.jeong@gmail.com>
Reviewed-by: NAxel Lin <axel.lin@gmail.com>
Reviewed-by: NKim, Milo <Milo.Kim@ti.com>
Acked-by: NRob Landley <rob@landley.net>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

the ret is got the status returned by the
led_classdev_register, returning ret if the
led_classdev_register fails and returning 0
if the led_classdev_register success, can be done
by doing just "return ret" at the end.
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

drivers/leds/led-core.c:56:6: sparse: symbol 'led_blink_setup' was not declared. Should it be static?
drivers/leds/led-triggers.c:233:6: sparse: symbol 'led_trigger_blink_setup' was not declared. Should it be static?
Reported-by: NFengguang Wu <wfg@linux.intel.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Correct "hadrware" to "hardware", for LEDS_TRIGGER_TRANSIENT.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Fix led_trigger_event() to use led_set_brightness() instead of
__led_set_brightness(), so that any pending blink timer is stopped before
setting the new brightness value.  Without this fix LED status may be
overridden by a pending timer.

This allows a trigger to use a mix of led_trigger_event(),
led_trigger_blink() and led_trigger_blink_oneshot() without races.

(applied over: leds: Rename led_brightness_set() to led_set_brightness())
Signed-off-by: NFabio Baltieri <fabio.baltieri@gmail.com>
Cc: Shuah Khan <shuahkhan@gmail.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Rename leds external interface led_brightness_set() to led_set_brightness().
This is the second phase of the change to reduce confusion between the
leds internal and external interfaces that set brightness. With this change,
now the external interface is led_set_brightness(). The first phase renamed
the internal interface led_set_brightness() to __led_set_brightness().
There are no changes to the interface implementations.
Signed-off-by: NShuah Khan <shuahkhan@gmail.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Rename leds internal interface led_set_brightness() to __led_set_brightness()
to reduce confusion between led_set_brightness() and the external interface
led_brightness_set(). led_brightness_set() cancels the timer and then calls
led_set_brightness().
Signed-off-by: NShuah Khan <shuahkhan@gmail.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Add oneshot trigger to blink a led with configurale parameters via
sysfs.
Signed-off-by: NFabio Baltieri <fabio.baltieri@gmail.com>
Cc: Shuah Khan <shuahkhan@gmail.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Move led_stop_software_blink() code into led_brightness_set() to ensure
software blink timer is stopped and cleared when changing trigger.

Also use led_set_brightness() instead of calling
led_cdev->brightness_set() directly to keep led_cdev->brightness
consistent with current LED status.

This ensure proper cleaning when changing triggers, as without this fix
a LED may be turned off while leaving it's led_cdev->brightness = 1,
leading to an erratic software-blink behaviour.

The problem was easy to reproduce by changing the trigger from "timer"
to "oneshot".
Signed-off-by: NFabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Convert ledtrig-ide-disk code to use the generic API for one-shot LED
blinking.

This patch changes slightly the behaviour of the trigger, as while the
original version kept the LED on under heavy activity, the new one keeps
a constant on-off blink at 1 / (2 * BLINK_DELAY) Hz.

(bryan.wu@canonical.com: remove 2 useless included header files)
Signed-off-by: NFabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Add two new functions, led_blink_set_oneshot and
led_trigger_blink_oneshot, to be used by triggers for one-shot blink of
led devices.

This is implemented extending the existing software-blink code, and uses
the same timer and handler function.

The behavior of the code is to do a blink-on, blink-off sequence when
the function is called, ignoring other calls until the sequence is
completed so that the leds keep blinking at constant rate if the
functions are called repeatedly.

This is meant to be used by drivers which needs to trigger on sporadic
event, but doesn't have clear busy/idle trigger points.

After the blink sequence the led remains off. This behavior can be
inverted setting the "invert" argument, which blink the led off, than on
and leave the led on after the sequence.

(bryan.wu@canonical.com: rebase to commit 'leds: don't disable blinking
when writing the same value to delay_on or delay_off')
Signed-off-by: NFabio Baltieri <fabio.baltieri@gmail.com>
Acked-by: NShuah Khan <shuahkhan@gmail.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

No functional change.
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

The SYSTEM_SUSPEND_DISK system state is never used, so drop it.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge emailed kgdb dmesg fixups patches from Anton Vorontsov:
 "The dmesg command appears to be broken after the printk rework.  The
  old logic in the kdb code makes no sense in terms of current
  printk/logging storage format, and KDB simply hangs forever upon
  entering 'dmesg' command.

  The first patch revives the command by switching to kmsg_dumper
  iterator.  As a side-effect, the code is now much more simpler.

  A few changes were needed in the printk.c: we needed unlocked variant
  of the kmsg_dumper iterator, but these can surely wait for 3.6.

  It's probably too late even for the first patch to go to 3.5, but I'll
  try to convince otherwise.  :-) Here we go:

   - The current code is broken for sure, and has no hope to work at
     all.  It is a regression
   - The new code works for me, and probably works for everyone else;
   - If it compiles (and I urge everyone to compile-test it on your
     setup), it hardly can make things worse."

* Merge emailed patches from Anton Vorontsov: (4 commits)
  kdb: Switch to nolock variants of kmsg_dump functions
  printk: Implement some unlocked kmsg_dump functions
  printk: Remove kdb_syslog_data
  kdb: Revive dmesg command

The locked variants are prone to deadlocks (suppose we got to the
debugger w/ the logbuf lock held), so let's switch to nolock variants.
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If used from KDB, the locked variants are prone to deadlocks (suppose we
got to the debugger w/ the logbuf lock held).

So, we have to implement a few routines that grab no logbuf lock.

Yet we don't need these functions in modules, so we don't export them.
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>