Tssk.  Apparently Al hadn't checked commit c52c2ddc ("alpha: switch
osf_sigprocmask() to use of sigprocmask()") at all. It doesn't compile.

Fixed as per suggestions from Michael Cree.
Reported-by: NMichael Cree <mcree@orcon.net.nz>
Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

get rid of a useless wrapper, while we are at it
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

rdusp() gives us the right value only for the current thread...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We want interrupts disabled on all paths leading to RESTORE_ALL;
otherwise, we are risking an IRQ coming between the updates of
alpha_mv->hae_cache and *alpha_mv->hae_register and set_hae()
within the IRQ getting badly confused.

RESTORE_ALL used to play with disabling IRQ itself, but that got
removed back in 2002, without making sure we had them disabled
on all paths.  It's cheaper to make sure we have them disabled than
to revert to original variant...

Remove the detritus left from that commit back in 2002; we used to
need a reload of $0 and $1 since swpipl would change those, but
doing that had become pointless when we stopped doing swpipl in
there...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Unlike the other targets, alpha sets _one_ sigframe and
buggers off until the next syscall/interrupt, even if
more signals are pending.  It leads to quite a few unpleasant
inconsistencies, starting with SIGSEGV potentially arriving
not where it should and including e.g. mess with sigsuspend();
consider two pending signals blocked until sigsuspend()
unblocks them.  We pick the first one; then, if we are hit
by interrupt while in the handler, we process the second one
as well.  If we are not, and if no syscalls had been made,
we get out of the first handler and leave the second signal
pending; normally sigreturn() would've picked it anyway, but
here it starts with restoring the original mask and voila -
the second signal is blocked again.  On everything else we
get both delivered consistently.

It's actually easy to fix; the only thing to watch out for
is prevention of double syscall restart.  Fortunately, the
idea I've nicked from arm fix by rmk works just fine...

Testcase demonstrating the behaviour in question; on alpha
we get one or both flags set (usually one), on everything
else both are always set.
	#include <signal.h>
	#include <stdio.h>
	int had1, had2;
	void f1(int sig) { had1 = 1; }
	void f2(int sig) { had2 = 1; }
	main()
	{
		sigset_t set1, set2;
		sigemptyset(&set1);
		sigemptyset(&set2);
		sigaddset(&set2, 1);
		sigaddset(&set2, 2);
		signal(1, f1);
		signal(2, f2);
		sigprocmask(SIG_SETMASK, &set2, NULL);
		raise(1);
		raise(2);
		sigsuspend(&set1);
		printf("had1:%d had2:%d\n", had1, had2);
	}
Tested-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

The way sigreturn() is implemented on alpha breaks PTRACE_SYSCALL,
all way back to 1.3.95 when alpha has grown PTRACE_SYSCALL support.

What happens is direct return to ret_from_syscall, in order to bypass
mangling of a3 (error indicator) and prevent other mutilations of
registers (e.g. by syscall restart).  That's fine, but... the entire
TIF_SYSCALL_TRACE codepath is kept separate on alpha and post-syscall
stopping/notifying the tracer is after the syscall.  And the normal
path we are forcibly switching to doesn't have it.

So we end up with *one* stop in traced sigreturn() vs. two in other
syscalls.  And yes, strace is visibly broken by that; try to strace
the following
	#include <signal.h>
	#include <stdio.h>
	void f(int sig) {}
	main()
	{
		signal(SIGHUP, f);
		raise(SIGHUP);
		write(1, "eeeek\n", 6);
	}
and watch the show.  The
	close(1)                                = 405
in the end of strace output is coming from return value of write() (6 ==
__NR_close on alpha) and syscall number of exit_group() (__NR_exit_group ==
405 there).

The fix is fairly simple - the only thing we end up missing is the call
of syscall_trace() and we can tell whether we'd been called from the
SYSCALL_TRACE path by checking ra value.  Since we are setting the
switch_stack up (that's what sys_sigreturn() does), we have the right
environment for calling syscall_trace() - just before we call
undo_switch_stack() and return.  Since undo_switch_stack() will overwrite
s0 anyway, we can use it to store the result of "has it been called from
SYSCALL_TRACE path?" check.  The same thing applies in rt_sigreturn().
Tested-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Old code used to set regs->r0 and regs->r19 to force the right
return value.  Leaving that after switch to ERESTARTNOHAND
was a Bad Idea(tm), since now that screws the restart - if we
hit the case when get_signal_to_deliver() returns 0, we will
step back to syscall insn, with v0 set to EINTR and a3 to 1.
The latter won't matter, since EINTR is 4, aka __NR_write.

Testcase:

	#include <signal.h>
	#define _GNU_SOURCE
	#include <unistd.h>
	#include <sys/syscall.h>

	main()
	{
		sigset_t mask;
		sigemptyset(&mask);
		sigaddset(&mask, SIGCONT);
		sigprocmask(SIG_SETMASK, &mask, NULL);
		kill(0, SIGCONT);
		syscall(__NR_sigsuspend, 1, "b0rken\n", 7);
	}

results on alpha in immediate message to stdout...

Fix is obvious; moreover, since we don't need regs anymore, we can
switch to normal prototypes for these guys and lose the wrappers.
Even better, rt_sigsuspend() is identical to generic version in
kernel/signal.c now.
Tested-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

same thing as had been done on other targets back in 2003 -
move setting ->restart_block.fn into {rt_,}sigreturn().
Tested-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Pending work from the performance event subsystem is executed in
the timer interrupt.  This patch shifts the call to
perf_event_do_pending() before the call to update_process_times()
as the latter may call back into the perf event subsystem and it
is prudent to have the pending work executed first.
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

The 2.6.36-rc kernel added three new system calls:
fanotify_init, fanotify_mark, and prlimit64.  This
patch wires them up on Alpha.

Built and booted on an XP900.  Untested beyond that.
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

All uses of the BKL on alpha are totally bogus, nothing
is really protected by this. Remove the remaining users
so we don't have to mark alpha as 'depends on BKL'.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Acked-by: NJan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Nmatt mooney <mfm@muteddisk.com>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Acked-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

When compiling alpha generic build get errors such as:
arch/alpha/kernel/err_marvel.c: In function ‘marvel_print_err_cyc’:
arch/alpha/kernel/err_marvel.c:119: error: format ‘%ld’ expects type ‘long int’, but argument 6 has type ‘u64’

Replaced a number of %ld format specifiers with %lld since u64
is unsigned long long.
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Updates the Alpha perf_event code to match the changes
recently made to the core perf_event code in commit
e7850595.
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

This patch fixes the failure to compile Alpha Generic because of
previously overlooked calls to ns87312_enable_ide(). The function has
been replaced by newer SuperIO code.
Tested-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NMorten H. Larsen <m-larsen@post6.tele.dk>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Fix a comma that got accidentally deleted from sys_osf_statfs() leading to the
following warning:

  arch/alpha/kernel/osf_sys.c: In function 'SYSC_osf_statfs':
  arch/alpha/kernel/osf_sys.c:255: error: syntax error before 'buffer'
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mark arguments to certain system calls as being const where they should be but
aren't.  The list includes:

 (*) The filename arguments of various stat syscalls, execve(), various utimes
     syscalls and some mount syscalls.

 (*) The filename arguments of some syscall helpers relating to the above.

 (*) The buffer argument of various write syscalls.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This implements hardware performance events for the EV67 and later CPUs
within the Linux performance events subsystem.  Only using the performance
monitoring unit in HP/Compaq's so called "Aggregrate mode" is supported.

The code has been implemented in a manner that makes extension to other
older Alpha CPUs relatively straightforward should some mug wish to
indulge themselves.
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jay Estabrook <jay.estabrook@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The following patches implement hardware performance events for the Alpha
EV67 and later CPUs.  I have had this running on a Compaq XP1000 (EV67,
single CPU) for a few days now.  Pretty cool -- discovered that the glibc
exp2() library routine uses on average 985 cycles to execute 777 CPU
instructions whereas Compaq's CPML library version of exp2() uses on
average 32 cycles to execute 47 CPU instructions to achieve the same
thing!

This patch:

Add performance monitor interrupt counternd and export the count to user
space via /proc/interrupts.
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jay Estabrook <jay.estabrook@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We'll need the path to implement the flags field for statvfs support.
We do have it available in all callers except:

 - ecryptfs_statfs.  This one doesn't actually need vfs_statfs but just
   needs to do a caller to the lower filesystem statfs method.
 - sys_ustat.  Add a non-exported statfs_by_dentry helper for it which
   doesn't won't be able to fill out the flags field later on.

In addition rename the helpers for statfs vs fstatfs to do_*statfs instead
of the misleading vfs prefix.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This patch probes for the Super IO chip and reserves the IO range when
found. It avoids enabling the IDE interface on the Avanti family, since
none has IDE. It enables the Enhanced Parallel Port v1.9 feature.
Signed-off-by: NMorten H. Larsen <m-larsen@post6.tele.dk>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Caused by 2c3c8bea which was clearly not
even compile tested.
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Alpha has a tsc like rpcc counter that it uses to manage time.
This can be converted to an actual clocksource instead of utilizing
the arch_gettimeoffset method that is really only there for legacy
systems with no continuous counter.

Further cleanups could be made if alpha converted to the clockevent
model.

CC: Thomas Gleixner <tglx@linutronix.de>
CC: Richard Henderson <rth@twiddle.net>
Acked-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Tested-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NJohn Stultz <johnstul@us.ibm.com>

This allows bin_attr->read,write,mmap callbacks to check file specific data
(such as inode owner) as part of any privilege validation.
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

Signed-off-by: NFrans Pop <elendil@planet.nl>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Replace open-coded rate limiting logic with __ratelimit().
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: NMatt Turner <mattst88@gmail.com>

This patch converts the alpha architecture to use the generic
read_persistent_clock and update_persistent_clock interfaces, reducing
the amount of arch specific code we have to maintain, and allowing for
further cleanups in the future.

I have not built or tested this patch, so help from arch maintainers
would be appreciated.
igned-off-by: NJohn Stultz <johnstul@us.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <1267675049-12337-2-git-send-email-johnstul@us.ibm.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This converts Alpha to use include/linux/pci-dma-compat.h.  Alpha is the
only architecutre that implements the PCI DMA API in the own way.  That
makes it difficult to implement the generic DMA API via the PCI bus
specific DMA API.

The generic DMA API calls the PCI DMA API implementation in
arch/alpha/kernel/pci_iommu.c on non Jensen systems.  It calls the DMA API
in arch/alpha/kernel/pci-noop.c on Jensen systems.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the generic ptrace_resume code for PTRACE_SYSCALL, PTRACE_CONT,
PTRACE_KILL and PTRACE_SINGLESTEP.  This implies defining
arch_has_single_step in <asm/ptrace.h> and implementing the
user_enable_single_step and user_disable_single_step functions, which also
causes the breakpoint information to be cleared on fork, which could be
considered a bug fix.

Also the TIF_SYSCALL_TRACE thread flag is now cleared on PTRACE_KILL which
it previously wasn't, which is consistent with all architectures using the
modern ptrace code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Acked-by: NMatt Turner <mattst88@gmail.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The initial -EINVAL value is overwritten by `retval = PTR_ERR(name)'.  If
this isn't an error pointer and typenr is not 1, 6 or 9, then this retval,
a pointer cast to a long, is returned.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Acked-by: NRichard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that we return the new resource start position, there is no
need to update "struct resource" inside the align function.
Therefore, mark the struct resource as const.

Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

As suggested by Linus, align functions should return the start
of a resource, not void. An update of "res->start" is no longer
necessary.

Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

In the kernel the patch enables configuration of the perf event
option, adds the perf_event_open syscall, and includes a minimal
architecture specific asm/perf_event.h header file.
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

This wire up the: fallocate, timerfd_create, timerfd_settime,
timerfd_gettime, signalfd4, eventfd2, epoll_create1, dup3, pipe2,
inotify_init1, preadv, pwritev and rt_tgsigqueueinfo syscalls for
the alpha port.

For umount2, alpha have an "old" and "new" version called: oldumount and
umount; so ignore umount2.

Rebased on top of 6e17e8b9 by Matt
Turner.
Signed-off-by: NDaniele Calore <orkaan@orkaan.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Convert code away from ->read_proc/->write_proc interfaces.  Switch to
proc_create()/proc_create_data() which make addition of proc entries
reliable wrt NULL ->proc_fops, NULL ->data and so on.

Problem with ->read_proc et al is described here commit
786d7e16 "Fix rmmod/read/write races in
/proc entries"
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert locks which cannot be sleeping locks in preempt-rt to
raw_spinlocks.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NIngo Molnar <mingo@elte.hu>