i.mx drivers should use clk_prepare_enable/clk_disable_unprepare() in
order to avoid clk warnings.

While at it, convert to devm_clk_get() since other devm_ functions are
used in this driver and it can also save some clk_put() calls.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

clk_prepare_enable and clk_disable_unprepare combine clk_prepare and
clk_enable, and clk_disable and clk_unprepare.  They make the code more
concise, and ensure that clk_unprepare is called when clk_enable fails.

A simplified version of the semantic patch that introduces calls to these
functions is as follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
@@

- clk_prepare(e);
- clk_enable(e);
+ clk_prepare_enable(e);

@@
expression e;
@@

- clk_disable(e);
- clk_unprepare(e);
+ clk_disable_unprepare(e);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add an RTC driver for the RTC device on Ricoh MFD Rc5t583.  Ricoh RTC has
3 types of alarms.  The current patch adds support for the Y-Alarm of
RC5t583 RTC.
Signed-off-by: NVenu Byravarasu <vbyravarasu@nvidia.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are several comparisons of a unsigned int to less than zero int
spear RTC driver.  Such a check will always be true.  In all these cases a
signed int is assigned to the unsigned variable, which is checked, before.
 So the right fix is to make the checked variable signed as well.  In one
case the check can be dropped completely, because all it does it returns
'err' if 'err' is less than zero, otherwise it returns 0.  Since in this
particular case 'err' is always either 0 or less this is the same as just
returning 'err'.

The issue has been found using the following coccinelle semantic patch:

//<smpl>
@@
type T;
unsigned T i;
@@
(
*i < 0
|
*i >= 0
)
//</smpl>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Cc: Viresh Kumar <viresh.kumar@st.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The irq field of the jz4740_irc struct is unsigned.  Yet we assign the
result of platform_get_irq() to it.  platform_get_irq() may return a
negative error code and the code checks for this condition by checking if
'irq' is less than zero.  But since 'irq' is unsigned this test will
always be false.  Fix it by making 'irq' signed.

The issue was found using the following coccinelle semantic patch:

//<smpl>
@@
type T;
unsigned T i;
@@
(
*i < 0
|
*i >= 0
)
//</smpl>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove "depends on RTC_CLASS = y" for multiple Kconfig definitions, as all
of them are already placed under "if RTC_CLASS".
Signed-off-by: NVenu Byravarasu <vbyravarasu@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The MAX8907 is an I2C-based power-management IC containing voltage
regulators, a reset controller, a real-time clock, and a touch-screen
controller.

The driver is based on an original by or fixed by:
* Tom Cherry
* Prashant Gaikwad
* Joseph Yoon

During upstreaming, I (swarren):
* Converted to regmap.
* Fixed handling of RTC_HOUR register containing 12.
* Fixed handling of RTC_WEEKDAY register.
* General cleanup.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Cc: Tom Cherry <tcherry@nvidia.com>
Cc: Prashant Gaikwad <pgaikwad@nvidia.com>
Cc: Joseph Yoon <tyoon@nvidia.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

TPS65910 PMIC is a MFD with RTC as one of the device.  Adding RTC driver
for supporting RTC device present inside TPS65910 PMIC.

Only support for RTC alarm is implemented as part of this patch.
Signed-off-by: NVenu Byravarasu <vbyravarasu@nvidia.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This driver does seems to do only platform_driver_register in the init
function and platform_driver_unregister in the exit function,

so replace all this code including the module_init and module_exit with
module_platform_driver macro...
Signed-off-by: NDevendra Naga <develkernel412222@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When calling rtc_device_unregister, we are not freeing the id used by the
driver.  So when doing a unload/load cycle for a RTC driver (e.g.  rmmod
rtc_cmos && modprobe rtc_cmos), its id is incremented by one.  As a
consequence, we no longer have neither an rtc0 driver nor a
/proc/driver/rtc (as it only exists for the first driver).
Signed-off-by: NVincent Palatin <vpalatin@chromium.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add an RTC driver for Freescale Secure Non-Volatile Storage (SNVS)
Low Power (LP) RTC.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[akpm@linux-foundation.org: fix warning]
Signed-off-by: NSven Schnelle <svens@stackframe.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To get time information via /proc/driver/rtc, only the first device (rtc0)
is used.  If the rtcN (eg.  rtc1 or rtc2) is used for the system clock,
there is no way to get information of rtcN via /proc/driver/rtc.  With
this patch, the time data can be retrieved from the system clock RTC.

If the RTC_HCTOSYS_DEVICE is not defined, then rtc0 is used by default.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The ISL1218 chip is identical to the ISL1208, except that it has 6
additional user-storage registers.  This patch does not enable access to
those additional registers, but only adds the chip name to the list.
Signed-off-by: NBen Gardner <gardner.ben@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

load_elf_interp() has interp_map_addr carefully described as
"uninitialized_var" and marked so as to avoid a warning.  However if you
trace the code it is passed into load_elf_interp and then this value is
checked against NULL.

As this return value isn't used this is actually safe but it freaks
various analysis tools that see un-initialized memory addresses being read
before their value is ever defined.

Set it to NULL as a matter of programming good taste if nothing else
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Enhanced epoll_ctl to support EPOLL_CTL_DISABLE, which disables an epoll
item.  If epoll_ctl doesn't return -EBUSY in this case, it is then safe to
delete the epoll item in a multi-threaded environment.  Also added a new
test_epoll self- test app to both demonstrate the need for this feature
and test it.
Signed-off-by: NPaton J. Lewis <palewis@adobe.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Holland <pholland@adobe.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix macro name in checkpatch: s/PARAM/PARM/.
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The block comment style in net/ and drivers/net is non-standard.
Document it.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: "Allan, Bruce W" <bruce.w.allan@intel.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In an effort to get fewer checkpatch reviewer corrections, add a
networking specific style test for the preferred networking comment style.

	/* The preferred style for block comments in
	 * drivers/net/... and net/... is like this
	 */

These tests are only used in net/ and drivers/net/

Tested with:

$ cat drivers/net/t.c

/* foo */

/*
 * foo
 */

/* foo
 */

/* foo
 * bar */
$ ./scripts/checkpatch.pl -f drivers/net/t.c
WARNING: networking block comments don't use an empty /* line, use /* Comment...
#4: FILE: net/t.c:4:
+
+/*

WARNING: networking block comments put the trailing */ on a separate line
#12: FILE: net/t.c:12:
+ * bar */

total: 0 errors, 2 warnings, 12 lines checked
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: "Allan, Bruce W" <bruce.w.allan@intel.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Direct conversion of printk(KERN_<LEVEL>...  to pr_<level> isn't the
preferred conversion when a struct net_device or struct device is
available.

Hint that using netdev_<level> or dev_<level> is preferred to using
pr_<level>.  Add netdev_dbg and dev_dbg variants too.

Miscellaneous whitespace neatening of a misplaced close brace.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Check that a commit log doesn't contain UTF-8 when a mail header
explicitly defines a different charset, like

'Content-Type: text/plain; charset="us-ascii"'
Signed-off-by: NPasi Savanainen <pasi.savanainen@nixu.com>
Cc: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

SG mapping iterator w/ SG_MITER_ATOMIC set required IRQ disabled because
it originally used KM_BIO_SRC_IRQ to allow use from IRQ handlers.
kmap_atomic() has long been updated to handle stacking atomic mapping
requests on per-cpu basis and only requires not sleeping while mapped.

Update sg_mapping_iter such that atomic iterators only require disabling
preemption instead of disabling IRQ.

While at it, convert wte weird @ARG@ notations to @ARG in the comment of
sg_miter_start().
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

They show up in dmesg

[    4.041094] start plist test
[    4.045804] end plist test

without a lot of meaning so hide them behind debug loglevel.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Xen's pciback points out a couple of deficiencies with vsscanf()'s
standard conformance:

- Trailing character matching cannot be checked by the caller: With a
  format string of "(%x:%x.%x) %n" absence of the closing parenthesis
  cannot be checked, as input of "(00:00.0)" doesn't cause the %n to be
  evaluated (because of the code not skipping white space before the
  trailing %n).

- The parameter corresponding to a trailing %n could get filled even if
  there was a matching error: With a format string of "(%x:%x.%x)%n",
  input of "(00:00.0]" would still fill the respective variable pointed to
  (and hence again make the mismatch non-detectable by the caller).

This patch aims at fixing those, but leaves other non-conforming aspects
of it untouched, among them these possibly relevant ones:

- improper handling of the assignment suppression character '*' (blindly
  discarding all succeeding non-white space from the format and input
  strings),

- not honoring conversion specifiers for %n, - not recognizing the C99
  conversion specifier 't' (recognized by vsprintf()).
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The logic in do_raw_spin_lock() attempts to acquire a spinlock by invoking
arch_spin_trylock() in a loop with a delay between each attempt.  Now
consider the following situation in a 2 CPU system:

1. CPU-0 continually acquires and releases a spinlock in a
   tight loop; it stays in this loop until some condition X
   is satisfied. X can only be satisfied by another CPU.

2. CPU-1 tries to acquire the same spinlock, in an attempt
   to satisfy the aforementioned condition X. However, it
   never sees the unlocked value of the lock because the
   debug spinlock code uses trylock instead of just lock;
   it checks at all the wrong moments - whenever CPU-0 has
   locked the lock.

Now in the absence of debug spinlocks, the architecture specific spinlock
code can correctly allow CPU-1 to wait in a "queue" (e.g., ticket
spinlocks), ensuring that it acquires the lock at some point.  However,
with the debug spinlock code, livelock can easily occur due to the use of
try_lock, which obviously cannot put the CPU in that "queue".  This
queueing mechanism is implemented in both x86 and ARM spinlock code.

Note that the situation mentioned above is not hypothetical.  A real
problem was encountered where CPU-0 was running hrtimer_cancel with
interrupts disabled, and CPU-1 was attempting to run the hrtimer that
CPU-0 was trying to cancel.

Address this by actually attempting arch_spin_lock once it is suspected
that there is a spinlock lockup.  If we're in a situation that is
described above, the arch_spin_lock should succeed; otherwise other
timeout mechanisms (e.g., watchdog) should alert the system of a lockup.
Therefore, if there is a genuine system problem and the spinlock can't be
acquired, the end result (irrespective of this change being present) is
the same.  If there is a livelock caused by the debug code, this change
will allow the lock to be acquired, depending on the implementation of the
lower level arch specific spinlock code.

[akpm@linux-foundation.org: tweak comment]
Signed-off-by: NVikram Mulukutla <markivx@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Premit use of another algorithm than the default first-fit one.  For
example a custom algorithm could be used to manage alignment requirements.

As I can't predict all the possible requirements/needs for all allocation
uses cases, I add a "free" field 'void *data' to pass any needed
information to the allocation function.  For example 'data' could be used
to handle a structure where you store the alignment, the expected memory
bank, the requester device, or any information that could influence the
allocation algorithm.

An usage example may look like this:
struct my_pool_constraints {
	int align;
	int bank;
	...
};

unsigned long my_custom_algo(unsigned long *map, unsigned long size,
		unsigned long start, unsigned int nr, void *data)
{
	struct my_pool_constraints *constraints = data;
	...
	deal with allocation contraints
	...
	return the index in bitmap where perform the allocation
}

void create_my_pool()
{
	struct my_pool_constraints c;
	struct gen_pool *pool = gen_pool_create(...);
	gen_pool_add(pool, ...);
	gen_pool_set_algo(pool, my_custom_algo, &c);
}

Add of best-fit algorithm function:
most of the time best-fit is slower then first-fit but memory fragmentation
is lower. The random buffer allocation/free tests don't show any arithmetic
relation between the allocation time and fragmentation but the
best-fit algorithm
is sometime able to perform the allocation when the first-fit can't.

This new algorithm help to remove static allocations on ESRAM, a small but
fast on-chip RAM of few KB, used for high-performance uses cases like DMA
linked lists, graphic accelerators, encoders/decoders. On the Ux500
(in the ARM tree) we have define 5 ESRAM banks of 128 KB each and use of
static allocations becomes unmaintainable:
cd arch/arm/mach-ux500 && grep -r ESRAM .
./include/mach/db8500-regs.h:/* Base address and bank offsets for ESRAM */
./include/mach/db8500-regs.h:#define U8500_ESRAM_BASE   0x40000000
./include/mach/db8500-regs.h:#define U8500_ESRAM_BANK_SIZE      0x00020000
./include/mach/db8500-regs.h:#define U8500_ESRAM_BANK0  U8500_ESRAM_BASE
./include/mach/db8500-regs.h:#define U8500_ESRAM_BANK1       (U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE)
./include/mach/db8500-regs.h:#define U8500_ESRAM_BANK2       (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
./include/mach/db8500-regs.h:#define U8500_ESRAM_BANK3       (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
./include/mach/db8500-regs.h:#define U8500_ESRAM_BANK4       (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
./include/mach/db8500-regs.h:#define U8500_ESRAM_DMA_LCPA_OFFSET     0x10000
./include/mach/db8500-regs.h:#define U8500_DMA_LCPA_BASE
(U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET)
./include/mach/db8500-regs.h:#define U8500_DMA_LCLA_BASE U8500_ESRAM_BANK4

I want to use genalloc to do dynamic allocations but I need to be able to
fine tune the allocation algorithm. I my case best-fit algorithm give
better results than first-fit, but it will not be true for every use case.
Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@stericsson.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Account for all properties when a and/or b are 0:
gcd(0, 0) = 0
gcd(a, 0) = a
gcd(0, b) = b

Fixes no known problems in current kernels.
Signed-off-by: NDavidlohr Bueso <dave@gnu.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The main option should not appear in the resulting .config when the
dependencies aren't met (i.e.  use "depends on" rather than directly
setting the default from the combined dependency values).

The sub-options should depend on the main option rather than a more
generic higher level one.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Acked-by: NDon Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The result of converting an integer value to another signed integer type
that's unable to represent the original value is implementation defined.
(See notes in section 6.3.1.3 of the C standard.)

In match_number(), the result of simple_strtol() (which returns type long)
is assigned to a value of type int.

Instead, handle the result of simple_strtol() in a well-defined way, and
return -ERANGE if the result won't fit in the int variable used to hold
the parsed result.

No current callers pay attention to the particular error value returned,
so this additional return code shouldn't do any harm.

[akpm@linux-foundation.org: coding-style tweaks]
Signed-off-by: NAlex Elder <elder@inktank.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To avoid name conflicts:

  drivers/video/riva/fbdev.c:281:9: sparse: preprocessor token MAX_LEVEL redefined

While at it, also make the other names more consistent and add
parentheses.

[akpm@linux-foundation.org: repair fallout]
[sfr@canb.auug.org.au: IB/mlx4: fix for MAX_ID_MASK to MAX_IDR_MASK name change]
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: walter harms <wharms@bfs.de>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that we have defined generic set_bit_le() we do not need to use
test_and_set_bit_le() for atomically setting a bit.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Needed to replace test_and_set_bit_le() in virt/kvm/kvm_main.c which is
being used for this missing function.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Needed to replace test_and_set_bit_le() in virt/kvm/kvm_main.c which is
being used for this missing function.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To introduce generic set_bit_le() later, we remove our own definition
and use a proper non-atomic bitops function: __set_bit_le().
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Acked-by: NGrant Grundler <grundler@parisc-linux.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are now standard functions for dealing with little-endian bit
arrays, so use them instead of our own implementations.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds the of_match_table to platform-lcd driver to be
probed when platform-lcd device node is found in the device tree.

[akpm@linux-foundation.org: include of.h]
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

devm_kfree should not have to be explicitly used.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x,d;
@@

x = devm_kzalloc(...)
...
?-devm_kfree(d,x);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This driver was for the ProGear webpad device which was produced in
2000/2001 and is not available on a market.  I no longer have this
hardware so can not even check how Linux works on it.
Signed-off-by: NMarcin Juszkiewicz <marcin@juszkiewicz.com.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This driver is a general version for LM3639 backlgiht + flash driver chip
of TI.

LM3639:
The LM3639 is a single chip LCD Display Backlight driver + white LED
Camera driver.  Programming is done over an I2C compatible interface.
www.ti.com

[akpm@linux-foundation.org: code layout tweaks]
Signed-off-by: NG.Shark Jeong <gshark.jeong@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Daniel Jeong <daniel.jeong@ti.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This driver is a general version for LM3630 backlgiht driver chip of TI.

LM3630 :
The LM3630 is a current mode boost converter which supplies the power
and controls the current in two strings of up to 10 LEDs per string.
Programming is done over an I2C compatible interface.
www.ti.com

[akpm@linux-foundation.org: make bled_name[] static, a few coding style tuneups, create new set_intensity(), partly to avoid awkward layout gymnastics]
Signed-off-by: NG.Shark Jeong <gshark.jeong@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Daniel Jeong <daniel.jeong@ti.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>