This patch adds basic kernel enablement for reading power values, fan
speed rpm and temperature values on powernv platforms which will
be exported to user space through sysfs interface.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: NNeelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

ADC128D818 is a System Monitor with Temperature Sensor. It is similar to LM80
and LM96080, but has 16 bit wide sensor registers and no fan speed monitoring.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Entries have been added at more or less random positions over time, so
it becomes difficult to find what you are looking for or figure out
where to insert new entries.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

LTC2945 is a system monitor that measures current, voltage, and power.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

LTC4260 is a Positive Voltage Hot Swap Controller.
The driver currently only supports voltage monitoring, not voltage control.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Driver Linear Technologies LTC4222 Dual Hot Swap Controller
The driver currently only supports voltage monitoring, not voltage control.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Similar to what was done for the lm75 driver.

Add depends on THERMAL since that is what provides the
register/unregister functions above, but only if THERMAL_OF was
selected as this is an optional feature of the driver.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>

Based on an earlier attempt by Randy Dunlap.

Fix SENSORS_LM75 dependencies to eliminate build errors:

drivers/built-in.o: In function `lm75_remove':
lm75.c:(.text+0x12bd8c): undefined reference to `thermal_zone_of_sensor_unregister'
drivers/built-in.o: In function `lm75_probe':
lm75.c:(.text+0x12c123): undefined reference to `thermal_zone_of_sensor_register'

Add depends on THERMAL since that is what provides the
register/unregister functions above, but only if THERMAL_OF was
selected as this is an optional feature of the driver.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>

Add support for IT8603E.

This closes bug #57861:
https://bugzilla.kernel.org/show_bug.cgi?id=57861

[JD: Fixes and clean-ups.]
Signed-off-by: NRudolf Marek <r.marek@assembler.cz>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

This was tested on a NETGEAR ReadyNAS 2120 device (Marvell Armada XP
based board, via DT).
Signed-off-by: NArnaud Ebalard <arno@natisbad.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Signed-off-by: NWilliam Markezana <william.markezana@meas-spec.com>
[Guenter Roeck - minor formatting changes]
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

The temperature reporting interface stays the same, so we just
add the PCI-ID to the list.

Verified on AMD Olive Hill.
Signed-off-by: NWei Hu <wei@aristanetworks.com>
Acked-by: NClemens Ladisch <clemens@ladisch.de>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

This patch adds support for ads1115 device to ads1015 driver.
Based on work of Emiliano Carnati <carnatiatebneuro.com>.
Tested on ARM CPU based board.
Signed-off-by: NEvgeniy A. Dushistov <dushistov@mail.ru>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

GMT G762/763 fan speed PWM controller is connected directly to a fan
and performs closed-loop or open-loop control of the fan speed. Two
modes - PWM or DC - are supported by the chip. Introduced driver
provides various knobs to control the operations of the chip (via
sysfs interface). Specific characteristics of the system can be passed
either using board init code or via DT. Documentation for both the
driver and DT bindings are also provided.
Signed-off-by: NArnaud Ebalard <arno@natisbad.org>
Tested-by: NSimon Guinot <simon.guinot@sequanux.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

These changes add DS1731 chip support to the ds1621 driver,
Kconfig, and documentation.
Signed-off-by: NRobert Coulson <rob.coulson@gmail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Add definitions, information, and code for ds1631 chip support
to the ds1621 driver.
Signed-off-by: NRobert Coulson <rob.coulson@gmail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Update the ds1621 documentation, driver, and Kconfig with
ds1721 chip support.
Signed-off-by: NRobert Coulson <rob.coulson@gmail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Basically it's the same as the original DS75 but much faster.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NGuenter Roeck <linux@roeck-us.net>

TMP432 is similar to TMP431 with a second external temperature sensor.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NJean Delvare <khali@linux-fr.org>

Each of ST-Ericsson X500 chip set series consists of both ABX500 and DBX500
chips. This is ABX500 hwmon driver, where the abx500.c is a common layer for
all ABX500s, and the ab8500.c is specific for AB8500 chip. Under this designed
structure, other chip specific files can be added simply using the same common
layer abx500.c.
Signed-off-by: NHongbo Zhang <hongbo.zhang@linaro.org>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NAnton Vorontsov <anton@enomsg.org>

NCT6775, NCT6776, and NCT6779 have a number of variants with the same
chip ID but different chip labels. Add text "or compatible" to the
message displayed when the driver is loaded and rephrase the Kconfig
entry to reflect that it also supports compatible chips.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

TMP431 is compatible to TMP401.

Also add support for additional I2C addresses supported by TMP411B
and TMP411C.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NJean Delvare <khali@linux-fr.org>

This driver will replace the w83627ehf driver for NCT6775F and NCT6776F,
and provides support for NCT6779D.

This patch provides support for voltage monitor attributes.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

This patch adds DT support to NTC driver to parse the
platform data.

Also adds the support to work as an iio device client.

During the probe ntc driver gets the respective channels of ADC
and uses iio_raw_read calls to get the ADC converted value.
Signed-off-by: NNaveen Krishna Chatradhi <ch.naveen@samsung.com>
[Guenter Roeck: fixed Kconfig dependencies; use ERR_CAST]
Tested-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

The adt7310/adt7320 is the SPI version of the adt7410/adt7420. The register map
layout is a bit different, i.e. the register addresses differ between the two
variants, but the bit layouts of the individual registers are identical. So both
chip variants can easily be supported by the same driver. The issue of non
matching register address layouts is solved by a simple look-up table which
translates the I2C addresses to the SPI addresses.

The patch moves the bulk of the adt7410 driver to a common module that will be
shared by the adt7410 and adt7310 drivers. This common module implements the
driver logic and uses a set of virtual functions to perform IO access. The
adt7410 and adt7310 driver modules provide proper implementations of these IO
accessor functions for I2C respective SPI.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Reviewed-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

This driver uses channel maps, defined either through device tree
or platform data, to create a hwmon driver which acts as a client
for the underlying IIO device channels.  Thus a general purpose
IIO adc driver can be used to provide hardware monitoring using a subset
of its channels.
Signed-off-by: NJonathan Cameron <jic23@kernel.org>
Acked-by: NGuenter Roeck <linux@roeck-us.net>

--
 The only non move changes here concern the description and changes to the
 dependencies to IIO explicit and hwmon implicit.

 I'm proposing moving this into hwmon on the basis of placing drivers
 based on what they provide rather than what their underlying hardware
 is.

 drivers/hwmon/Kconfig           |   9 ++
 drivers/hwmon/Makefile          |   1 +
 drivers/hwmon/iio_hwmon.c       | 196 ++++++++++++++++++++++++++++++++++++++++
 drivers/staging/iio/Kconfig     |   8 --
 drivers/staging/iio/Makefile    |   2 -
 drivers/staging/iio/iio_hwmon.c | 196 ----------------------------------------
 6 files changed, 206 insertions(+), 206 deletions(-)

The adt7420 is software compatible to the adt7410.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Reviewed-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NJean Delvare <khali@linux-fr.org>

Add support for the TI / Burr-Brown INA209 voltage / current / power
monitor.

Cc: Paul Hays <haysp@magma.net>
Cc: Ira W. Snyder <iws@ovro.caltech.edu>
Tested-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Assume that IT8771E and IT8772E are fully compatible with IT8728F.

IT8771E support contributed by Kelly Anderson.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NJean Delvare <khali@linux-fr.org>

Add support for MAX6581, MAX6602, MAX6622, MAX6636, MAX6689, MAX6693,
MAX6694, MAX6697, MAX6698, and MAX6699 temperature sensors
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NJean Delvare <khali@linux-fr.org>

This is the HWMON patch for DA9055 PMIC and has got dependency on the
DA9055 MFD core.

This patch monitors the DA9055 PMIC's ADC channels vddout, junction temperature
and auxiliary channels.

This patch is functionally tested on Samsung SMDKV6410.
Signed-off-by: NDavid Dajun Chen <dchen@diasemi.com>
Signed-off-by: NAshish Jangam <ashish.jangam@kpitcummins.com>
[Guenter Roeck: Dropped __devinit, __devexit, __devexit_p]
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

So far, we use the NM10 Express Chipset PCI chip ID to detect TjMax for
Atom CPUs with model 0x1c. As it turns out, we can use the CPU stepping
(x86_mask) for the same purpose; stepping is 10 for all model 0x1c CPUs
with TjMax of 100 degrees C. This was verified by checking the output of
/proc/cpuinfo for the respective CPUs (D4xx, D5xx, N4xx, N5xx).

Other CPUs currently covered by the same code (Exx, Z6xx, Z2460) are not
supported by the NM10 Express Chipset. Most of those CPUs have TjMax of 90
degrees C, except for E6xxT models which have a TjMax of 110 degrees C.
E6xxT CPUs can however not be detected by software.

Calculate TjMax for Atom CPUs as follows. Note that the listed values are not
correct in some cases (230, 330). tjmax_table is used for those to override
the default values.

ID	Stepping	TjMax		Models
0x1c	10		100		D4xx, N4xx, D5xx, N5xx
0x1c	not 10		90		Z5xx, N2xx, 230, 330, others
0x26	-		90		Atom Tunnel Creek (Exx),
					Lincroft (Z6xx)
0x27	-		90		Atom Medfield (Z2460)
0x36	-		100		Atom Cedar Trail (N2xxx, D2xxx)

Also drop the module dependency on PCI.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NJean Delvare <khali@linux-fr.org>

The ADS7830 device is almost the same as the ADS7828,
except that it does 8-bit sampling, instead of 12-bit.
This patch extends the ads7828 driver to support this chip.
Signed-off-by: NGuillaume Roguez <guillaume.roguez@savoirfairelinux.com>
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

hwmon framework driver for Versatile Express sensors, providing
information about board level voltage (only when regulator driver
is not configured), currents, temperature and power/energy usage.
Labels for the values can be defined as DT properties.
Signed-off-by: NPawel Moll <pawel.moll@arm.com>
Acked-by: NGuenter Roeck <linux@roeck-us.net>

This movement is needed because the hwmon entries and corresponding sysfs
interface is a duplicate of utilities already provided by
driver/thermal/thermal_sys.c.  The goal is to place it in thermal folder
and add necessary functions to use the in-kernel thermal interfaces.
Signed-off-by: NAmit Daniel Kachhap <amit.kachhap@linaro.org>
Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Cc: SangWook Ju <sw.ju@samsung.com>
Cc: Durgadoss <durgadoss.r@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This Patch adds support for mcp3221 chip to the
mcp3021 driver.
Signed-off-by: NSven Schuchmann <schuchmann@schleissheimer.de>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

CONFIG_EXPERIMENTAL is expected to be removed, so drop dependencies on it.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NJean Delvare <khali@linux-fr.org>