- 10 2月, 2008 1 次提交
-
-
由 David Brownell 提交于
Fix section warning: WARNING: arch/arm/mach-at91/built-in.o(.text+0xd74): Section mismatch in reference from the function init_programmable_clock() to the function .init.text:at91_css_to_clk() The function init_programmable_clock() references the function __init at91_css_to_clk(). This is often because init_programmable_clock lacks a __init annotation or the annotation of at91_css_to_clk is wrong. In this case the only calls to and from init_programmable_clock() are from code marked as "__init", so this fix is trivially correct. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NUwe Kleine-Knig <Uwe.Kleine-Koenig@digi.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 26 1月, 2008 1 次提交
-
-
由 Andrew Victor 提交于
Add support for Atmel's AT91CAP9 Customizable Microcontroller family. <http://www.atmel.com/products/AT91CAP/Default.asp> Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 27 11月, 2007 1 次提交
-
-
由 Andrew Victor 提交于
The calculation for the Master clock divisor (MDIV) is different on the SAM9 processors than on the AT91RM9200. Orignal patch from Sascha Erlacher. Also use the defined AT91_PMC_PRES instead of hard-coded bitmasks. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 03 6月, 2007 1 次提交
-
-
由 Andrew Victor 提交于
The number of programmable clocks available on the AT91 processors can differ, therefore do not always display the contents of the PMC_PCKR(0) .. PMC_PCKR(3) registers (ie, assume there are 4 clocks). If CONFIG_AT91_PROGRAMMABLE_CLOCKS is enabled, the programmable clocks will be registered like the other system/peripheral clocks, and the state of the programmable clocks will be displayed like with the other clocks. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 09 2月, 2007 1 次提交
-
-
由 Andrew Victor 提交于
Unconditionally disabling the PCKs (Programmable Clocks) is not a good idea as it breaks boards that depend on those clocks being enabled by bootloaders. Therefore only disable unused clocks late in the init process, giving the board init code the chance to claim the clock. Patch from Steven Scholz. Since the HCK clocks on SAM9261 are already being registered as a independent clocks, we don't need the special case for HCK0 on the SAM9261. Platform-init code and drivers should use the clock API to enable/disable the clock. Patch from Nicolas Ferre. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 08 2月, 2007 2 次提交
-
-
由 Andrew Victor 提交于
Add support for the Atmel AT91SAM9263 processor. It is similar to the AT91SAM9260 but with more integrated peripherals, 5 GPIO banks, etc. Original patch from Nicolas Ferre. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Now that Linux includes support for the Atmel AT91SAM9260 and AT91SAM9261 processors in addition to the original Atmel AT91RM9200 (with support for more AT91 processors pending), the "mach-at91rm9200" and "arch-at91rm9200" directories should be renamed to indicate their more generic nature. The following git commands should be run BEFORE applying this patch: git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91 git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91 Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 01 12月, 2006 2 次提交
-
-
由 Andrew Victor 提交于
The bits used to select the USB clocks are different on the SAM9's. Add support for the HCK clocks on the AT91SAM9261. Patch from Patrice Vilchez & Nicolas Ferre Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
This patch updates the drivers (and other files) which include the hardware headers. This fixes the breakage introduced in patches 3950/1 and 3951/1 (those patches were getting big). The AVR32 architecture uses the same serial driver and had its own copy of at91rm9200_pdc.h. Renamed it to at91_pdc.h Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 28 9月, 2006 2 次提交
-
-
由 Andrew Victor 提交于
This patch makes the AT91 clock.c support processor-generic (AT91RM9200 and AT91SAM9xxx). The clocks supported by a particular AT91 processor are defined in the processor-specific file and are registered with clock.c at startup. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
This is more preparation for adding support for the new Atmel AT91SAM9 processors. Changes include: - Replace AT91_BASE_* with AT91RM9200_BASE_* - Replace AT91_ID_* with AT91RM9200_ID_* - ROM, SRAM and UHP address definitions moved to at91rm9200.h. - The raw AT91_P[ABCD]_* definitions are now depreciated in favour of the GPIO API. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 21 6月, 2006 2 次提交
-
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Patch from Andrew Victor This patch removes some now unnecessary global variables - at91_master_clock, at91_serial_map, at91_console_port. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 19 6月, 2006 1 次提交
-
-
由 Andrew Victor 提交于
Patch from Andrew Victor Some updates to the clock infrastructure for the AT91RM9200. 1. Hard-coded values replaced with names defined in at91rm9200_sys.h. 2. Added the four PIO clocks, which are enabled at startup. 3. At startup, disable all unused clocks. 4. Minor bugfix for usage counts associated with MCK. [Patch from David Brownell] 5. Added at91_clock_associate() function to associate device & function with a particular clock. [Patch from David Brownell] Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 23 3月, 2006 1 次提交
-
-
由 Andrew Victor 提交于
Patch from Andrew Victor This patch includes a few changes to the clock support on the AT91RM9200. 1. Added definitions for Ethernet, MMC, TWI, USARTs, and SPI peripheral clocks. 2. Replaced some hard-coded hex values with the text definitions in at91rm9200_sys.h. 3. If the USB96M bit is set for PLLB, then the rate of PLLB is not affected but only the USB Host/Device clocks which are derived from it. Issue reported by Sergei Sharonov. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 10 1月, 2006 1 次提交
-
-
由 SAN People 提交于
Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-