Due to the use of rhashtables in net namespaces,
rhashtable.h is included in lots of the kernel,
so a small changes can required a large recompilation.
This makes development painful.

This patch splits out rhashtable-types.h which just includes
the major type declarations, and does not include (non-trivial)
inline code.  rhashtable.h is no longer included by anything
in the include/ directory.
Common include files only include rhashtable-types.h so a large
recompilation is only triggered when that changes.
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

print_ht in rhashtable_test calls rht_dereference() with neither
RCU protection or the mutex.  This triggers an RCU warning.
So take the mutex to silence the warning.
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The dst_cid and src_cid are 64 bits, therefore 64 bit accessors should be
used, and in fact in virtio_transport_common.c only 64 bit accessors are
used. Using 32 bit accessors for 64 bit values breaks big endian systems.

This patch fixes a wrong use of le32_to_cpu in virtio_transport_send_pkt.

Fixes: b9116823 ("VSOCK: add loopback to virtio_transport")
Signed-off-by: NClaudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function cpdma_desc_pool_create is local to the source and does not
need to be in global scope, so make it static.

Cleans up sparse warning:
warning: symbol 'cpdma_desc_pool_create' was not declared. Should it
be static?
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ross Lagerwall says:

====================
xen-netfront: Fix issues with commit f599c64f

Fix a couple of issues with commit f599c64f ("xen-netfront: Fix race
between device setup and open").
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update the features after calling register_netdev() otherwise the
device features are not set up correctly and it not possible to change
the MTU of the device. After this change, the features reported by
ethtool match the device's features before the commit which introduced
the issue and it is possible to change the device's MTU.

Fixes: f599c64f ("xen-netfront: Fix race between device setup and open")
Reported-by: NLiam Shepherd <liam@dancer.es>
Signed-off-by: NRoss Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes: f599c64f ("xen-netfront: Fix race between device setup and open")
Reported-by: NBen Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: NRoss Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If flower filter is created without the skip_sw flag, fl_mask_put()
can race with fl_classify() and we can destroy the mask rhashtable
while a lookup operation is accessing it.

 BUG: unable to handle kernel paging request at 00000000000911d1
 PGD 0 P4D 0
 SMP PTI
 CPU: 3 PID: 5582 Comm: vhost-5541 Not tainted 4.18.0-rc1.vanilla+ #1950
 Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016
 RIP: 0010:rht_bucket_nested+0x20/0x60
 Code: 31 c8 c1 c1 18 29 c8 c3 66 90 8b 4f 04 ba 01 00 00 00 8b 07 48 8b bf 80 00 00 0
 RSP: 0018:ffffafc5cfbb7a48 EFLAGS: 00010206
 RAX: 0000000000001978 RBX: ffff9f12dff88a00 RCX: 00000000ffff9f12
 RDX: 00000000000911d1 RSI: 0000000000000148 RDI: 0000000000000001
 RBP: ffff9f12dff88a00 R08: 000000005f1cc119 R09: 00000000a715fae2
 R10: ffffafc5cfbb7aa8 R11: ffff9f1cb4be804e R12: ffff9f1265e13000
 R13: 0000000000000000 R14: ffffafc5cfbb7b48 R15: ffff9f12dff88b68
 FS:  0000000000000000(0000) GS:ffff9f1d3f0c0000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00000000000911d1 CR3: 0000001575a94006 CR4: 00000000001626e0
 Call Trace:
  fl_lookup+0x134/0x140 [cls_flower]
  fl_classify+0xf3/0x180 [cls_flower]
  tcf_classify+0x78/0x150
  __netif_receive_skb_core+0x69e/0xa50
  netif_receive_skb_internal+0x42/0xf0
  tun_get_user+0xdd5/0xfd0 [tun]
  tun_sendmsg+0x52/0x70 [tun]
  handle_tx+0x2b3/0x5f0 [vhost_net]
  vhost_worker+0xab/0x100 [vhost]
  kthread+0xf8/0x130
  ret_from_fork+0x35/0x40
 Modules linked in: act_mirred act_gact cls_flower vhost_net vhost tap sch_ingress
 CR2: 00000000000911d1

Fix the above waiting for a RCU grace period before destroying the
rhashtable: we need to use tcf_queue_work(), as rhashtable_destroy()
must run in process context, as pointed out by Cong Wang.

v1 -> v2: use tcf_queue_work to run rhashtable_destroy().

Fixes: 05cd271f ("cls_flower: Support multiple masks per priority")
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should put copy_skb in receive_queue only after
a successful call to virtio_net_hdr_from_skb().

syzbot report :

BUG: KASAN: use-after-free in __skb_unlink include/linux/skbuff.h:1843 [inline]
BUG: KASAN: use-after-free in __skb_dequeue include/linux/skbuff.h:1863 [inline]
BUG: KASAN: use-after-free in skb_dequeue+0x16a/0x180 net/core/skbuff.c:2815
Read of size 8 at addr ffff8801b044ecc0 by task syz-executor217/4553

CPU: 0 PID: 4553 Comm: syz-executor217 Not tainted 4.18.0-rc1+ #111
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
 __skb_unlink include/linux/skbuff.h:1843 [inline]
 __skb_dequeue include/linux/skbuff.h:1863 [inline]
 skb_dequeue+0x16a/0x180 net/core/skbuff.c:2815
 skb_queue_purge+0x26/0x40 net/core/skbuff.c:2852
 packet_set_ring+0x675/0x1da0 net/packet/af_packet.c:4331
 packet_release+0x630/0xd90 net/packet/af_packet.c:2991
 __sock_release+0xd7/0x260 net/socket.c:603
 sock_close+0x19/0x20 net/socket.c:1186
 __fput+0x35b/0x8b0 fs/file_table.c:209
 ____fput+0x15/0x20 fs/file_table.c:243
 task_work_run+0x1ec/0x2a0 kernel/task_work.c:113
 exit_task_work include/linux/task_work.h:22 [inline]
 do_exit+0x1b08/0x2750 kernel/exit.c:865
 do_group_exit+0x177/0x440 kernel/exit.c:968
 __do_sys_exit_group kernel/exit.c:979 [inline]
 __se_sys_exit_group kernel/exit.c:977 [inline]
 __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:977
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4448e9
Code: Bad RIP value.
RSP: 002b:00007ffd5f777ca8 EFLAGS: 00000202 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004448e9
RDX: 00000000004448e9 RSI: 000000000000fcfb RDI: 0000000000000001
RBP: 00000000006cf018 R08: 00007ffd0000a45b R09: 0000000000000000
R10: 00007ffd5f777e48 R11: 0000000000000202 R12: 00000000004021f0
R13: 0000000000402280 R14: 0000000000000000 R15: 0000000000000000

Allocated by task 4553:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490
 kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554
 skb_clone+0x1f5/0x500 net/core/skbuff.c:1282
 tpacket_rcv+0x28f7/0x3200 net/packet/af_packet.c:2221
 deliver_skb net/core/dev.c:1925 [inline]
 deliver_ptype_list_skb net/core/dev.c:1940 [inline]
 __netif_receive_skb_core+0x1bfb/0x3680 net/core/dev.c:4611
 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4693
 netif_receive_skb_internal+0x12e/0x7d0 net/core/dev.c:4767
 netif_receive_skb+0xbf/0x420 net/core/dev.c:4791
 tun_rx_batched.isra.55+0x4ba/0x8c0 drivers/net/tun.c:1571
 tun_get_user+0x2af1/0x42f0 drivers/net/tun.c:1981
 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:2009
 call_write_iter include/linux/fs.h:1795 [inline]
 new_sync_write fs/read_write.c:474 [inline]
 __vfs_write+0x6c6/0x9f0 fs/read_write.c:487
 vfs_write+0x1f8/0x560 fs/read_write.c:549
 ksys_write+0x101/0x260 fs/read_write.c:598
 __do_sys_write fs/read_write.c:610 [inline]
 __se_sys_write fs/read_write.c:607 [inline]
 __x64_sys_write+0x73/0xb0 fs/read_write.c:607
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 4553:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
 __cache_free mm/slab.c:3498 [inline]
 kmem_cache_free+0x86/0x2d0 mm/slab.c:3756
 kfree_skbmem+0x154/0x230 net/core/skbuff.c:582
 __kfree_skb net/core/skbuff.c:642 [inline]
 kfree_skb+0x1a5/0x580 net/core/skbuff.c:659
 tpacket_rcv+0x189e/0x3200 net/packet/af_packet.c:2385
 deliver_skb net/core/dev.c:1925 [inline]
 deliver_ptype_list_skb net/core/dev.c:1940 [inline]
 __netif_receive_skb_core+0x1bfb/0x3680 net/core/dev.c:4611
 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4693
 netif_receive_skb_internal+0x12e/0x7d0 net/core/dev.c:4767
 netif_receive_skb+0xbf/0x420 net/core/dev.c:4791
 tun_rx_batched.isra.55+0x4ba/0x8c0 drivers/net/tun.c:1571
 tun_get_user+0x2af1/0x42f0 drivers/net/tun.c:1981
 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:2009
 call_write_iter include/linux/fs.h:1795 [inline]
 new_sync_write fs/read_write.c:474 [inline]
 __vfs_write+0x6c6/0x9f0 fs/read_write.c:487
 vfs_write+0x1f8/0x560 fs/read_write.c:549
 ksys_write+0x101/0x260 fs/read_write.c:598
 __do_sys_write fs/read_write.c:610 [inline]
 __se_sys_write fs/read_write.c:607 [inline]
 __x64_sys_write+0x73/0xb0 fs/read_write.c:607
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8801b044ecc0
 which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 0 bytes inside of
 232-byte region [ffff8801b044ecc0, ffff8801b044eda8)
The buggy address belongs to the page:
page:ffffea0006c11380 count:1 mapcount:0 mapping:ffff8801d9be96c0 index:0x0
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffffea0006c17988 ffff8801d9bec248 ffff8801d9be96c0
raw: 0000000000000000 ffff8801b044e040 000000010000000c 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8801b044eb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8801b044ec00: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc
>ffff8801b044ec80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
                                           ^
 ffff8801b044ed00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8801b044ed80: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc

Fixes: 58d19b19 ("packet: vnet_hdr support for tpacket_rcv")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sha: 702353b5 ("selftest: add test for TCP_INQ") forgot to add
tcp_inq to .gitignore.
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When delta passed to gem_ptp_adjtime is negative, the sign is
maintained in the ns_to_timespec64 conversion. Hence timespec_add
should be used directly. timespec_sub will just subtract the negative
value thus increasing the time difference.
Signed-off-by: NHarini Katakam <harini.katakam@xilinx.com>
Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 296d4856 ("ipvlan: inherit MTU from master device") adjusted
the mtu from the master device when creating a ipvlan device, but it
would also override the mtu value set in rtnl_create_link. It causes
IFLA_MTU param not to take effect.

So this patch is to not adjust the mtu if IFLA_MTU param is set when
creating a ipvlan device.

Fixes: 296d4856 ("ipvlan: inherit MTU from master device")
Reported-by: NJianlin Shi <jishi@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently it is incrementing SctpFragUsrMsgs when the user message size
is of the exactly same size as the maximum fragment size, which is wrong.

The fix is to increment it only when user message is bigger than the
maximum fragment size.

Fixes: bfd2e4b8 ("sctp: refactor sctp_datamsg_from_user")
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit 9facc336 ("bpf: reject any prog that failed read-only lock")
offsetof(struct bpf_binary_header, image) became 3 instead of 4,
breaking powerpc BPF badly, since instructions need to be word aligned.

Fixes: 9facc336 ("bpf: reject any prog that failed read-only lock")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When injecting frames in the Ocelot switch driver an injection header
(IFH) should be used to configure various parameters related to a given
frame, such as the port onto which the frame should be departed or its
vlan id. Other parameters in the switch configuration can led to an
injected frame being sent without an IFH but this led to various issues
as the per-frame parameters are then not used. This is especially true
when using multiple ports for injection.

The IFH was injected with the wrong endianness which led to the switch
not taking it into account as the IFH_INJ_BYPASS bit was then unset.
(The bit tells the switch to use the IFH over its internal
configuration). This patch fixes it.

In addition to the endianness fix, the IFH is also fixed. As it was
(unwillingly) unused, some of its fields were not configured the right
way.

Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Device tree based systems without of_dev_auxdata will have the mdio
device named differently than "davinci_mdio(.0)". In this case use the
device's parent's compatible string for matching
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pass the correct thing to rtl8169_interrupt() from netpoll.

Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
Cc: netdev@vger.kernel.org
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Fixes: ebcd5daa ("r8169: change interrupt handler argument type")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In function strp_data_ready(), it is useless to call queue_work if
the state of strparser is already paused. The state checking should
be done before calling queue_work. The change reduces the context
switches and improves the ktls-rx throughput by approx 20% (measured
on cortex-a53 based platform).
Signed-off-by: NVakul Garg <vakul.garg@nxp.com>
Acked-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add fragments to pass bridge and vlan tests.

Fixes: 33b01b7b ("selftests: add rtnetlink test script")
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use $(OBJDUMP) instead of literal 'objdump' to avoid
using host toolchain when cross compiling.

Fixes: 421780fd ("bpfilter: fix build error")
Signed-off-by: NMatteo Croce <mcroce@redhat.com>
Reported-by: NStefano Brivio <sbrivio@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull rdma fixes from Jason Gunthorpe:
 "Here are eight fairly small fixes collected over the last two weeks.

  Regression and crashing bug fixes:

   - mlx4/5: Fixes for issues found from various checkers

   - A resource tracking and uverbs regression in the core code

   - qedr: NULL pointer regression found during testing

   - rxe: Various small bugs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/rxe: Fix missing completion for mem_reg work requests
  RDMA/core: Save kernel caller name when creating CQ using ib_create_cq()
  IB/uverbs: Fix ordering of ucontext check in ib_uverbs_write
  IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()'
  RDMA/qedr: Fix NULL pointer dereference when running over iWARP without RDMA-CM
  IB/mlx5: Fix return value check in flow_counters_set_data()
  IB/mlx5: Fix memory leak in mlx5_ib_create_flow
  IB/rxe: avoid double kfree skb

Pull networking fixes from David Miller:

 1) Fix crash on bpf_prog_load() errors, from Daniel Borkmann.

 2) Fix ATM VCC memory accounting, from David Woodhouse.

 3) fib6_info objects need RCU freeing, from Eric Dumazet.

 4) Fix SO_BINDTODEVICE handling for TCP sockets, from David Ahern.

 5) Fix clobbered error code in enic_open() failure path, from
    Govindarajulu Varadarajan.

 6) Propagate dev_get_valid_name() error returns properly, from Li
    RongQing.

 7) Fix suspend/resume in davinci_emac driver, from Bartosz Golaszewski.

 8) Various act_ife fixes (recursive locking, IDR leaks, etc.) from
    Davide Caratti.

 9) Fix buggy checksum handling in sungem driver, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits)
  ip: limit use of gso_size to udp
  stmmac: fix DMA channel hang in half-duplex mode
  net: stmmac: socfpga: add additional ocp reset line for Stratix10
  net: sungem: fix rx checksum support
  bpfilter: ignore binary files
  bpfilter: fix build error
  net/usb/drivers: Remove useless hrtimer_active check
  net/sched: act_ife: preserve the action control in case of error
  net/sched: act_ife: fix recursive lock and idr leak
  net: ethernet: fix suspend/resume in davinci_emac
  net: propagate dev_get_valid_name return code
  enic: do not overwrite error code
  net/tcp: Fix socket lookups with SO_BINDTODEVICE
  ptp: replace getnstimeofday64() with ktime_get_real_ts64()
  net/ipv6: respect rcu grace period before freeing fib6_info
  net: net_failover: fix typo in net_failover_slave_register()
  ipvlan: use ETH_MAX_MTU as max mtu
  net: hamradio: use eth_broadcast_addr
  enic: initialize enic->rfs_h.lock in enic_probe
  MAINTAINERS: Add Sam as the maintainer for NCSI
  ...

Pull HID fixes from Jiri Kosina:

 - Wacom 2nd-gen Intuos Pro large Y axis handling fix from Jason Gerecke

 - fix for hibernation in Intel ISH driver, from Even Xu

 - crash fix for hid-steam driver, from Rodrigo Rivas Costa

 - new device ID addition to google-hammer driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wacom: Correct logical maximum Y for 2nd-gen Intuos Pro large
  HID: intel_ish-hid: ipc: register more pm callbacks to support hibernation
  HID: steam: use hid_device.driver_data instead of hid_set_drvdata()
  HID: google: Add support for whiskers

Pull dma-mapping rename from Christoph Hellwig:
 "Move all the dma-mapping code to kernel/dma and lose their dma-*
  prefixes"

* tag 'dma-rename-4.18' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: move all DMA mapping code to kernel/dma
  dma-mapping: use obj-y instead of lib-y for generic dma ops

The HID descriptor for the 2nd-gen Intuos Pro large (PTH-860) contains
a typo which defines an incorrect logical maximum Y value. This causes
a small portion of the bottom of the tablet to become unusable (both
because the area is below the "bottom" of the tablet and because
'wacom_wac_event' ignores out-of-range values). It also results in a
skewed aspect ratio.

To fix this, we add a quirk to 'wacom_usage_mapping' which overwrites
the data with the correct value.
Signed-off-by: NJason Gerecke <jason.gerecke@wacom.com>
CC: stable@vger.kernel.org # v4.10+
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Current ISH driver only registers suspend/resume PM callbacks which don't
support hibernation (suspend to disk). Basically after hiberation, the ISH
can't resume properly and user may not see sensor events (for example: screen
		rotation may not work).

User will not see a crash or panic or anything except the following message
in log:

	hid-sensor-hub 001F:8086:22D8.0001: timeout waiting for response from ISHTP device

So this patch adds support for S4/hiberbation to ISH by using the
SIMPLE_DEV_PM_OPS() MACRO instead of struct dev_pm_ops directly. The suspend
and resume functions will now be used for both suspend to RAM and hibernation.

If power management is disabled, SIMPLE_DEV_PM_OPS will do nothing, the suspend
and resume related functions won't be used, so mark them as __maybe_unused to
clarify that this is the intended behavior, and remove #ifdefs for power
management.

Cc: stable@vger.kernel.org
Signed-off-by: NEven Xu <even.xu@intel.com>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When creating the low-level hidraw device, the reference to steam_device
was stored using hid_set_drvdata(). But this value is not guaranteed to
be kept when set before calling probe. If this pointer is reset, it
crashes when opening the emulated hidraw device.

It looks like hid_set_drvdata() is for users "avobe" this hid_device,
while hid_device.driver_data it for users "below" this one.

In this case, we are creating a virtual hidraw device, so we must use
hid_device.driver_data.
Signed-off-by: NRodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Tested-by: NMariusz Ceier <mceier+kernel@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The rewrite of the cmdline fetching missed the fact that we used to also
return the final terminating NUL character of the last argument.  I
hadn't noticed, and none of the tools I tested cared, but something
obviously must care, because Michal Kubecek noticed the change in
behavior.

Tweak the "find the end" logic to actually include the NUL character,
and once past the eend of argv, always start the strnlen() at the
expected (original) argument end.

This whole "allow people to rewrite their arguments in place" is a nasty
hack and requires that odd slop handling at the end of the argv array,
but it's our traditional model, so we continue to support it.
Repored-and-bisected-by: NMichal Kubecek <mkubecek@suse.cz>
Reviewed-and-tested-by: NMichal Kubecek <mkubecek@suse.cz>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The ipcm(6)_cookie field gso_size is set only in the udp path. The ip
layer copies this to cork only if sk_type is SOCK_DGRAM. This check
proved too permissive. Ping and l2tp sockets have the same type.

Limit to sockets of type SOCK_DGRAM and protocol IPPROTO_UDP to
exclude ping sockets.

v1 -> v2
- remove irrelevant whitespace changes

Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT")
Reported-by: NMaciej Żenczykowski <maze@google.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

HW does not support Half-duplex mode in multi-queue
scenario. Fix it by not advertising the Half-Duplex
mode if multi-queue enabled.
Signed-off-by: NBhadram Varka <vbhadram@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Stratix10 platform has an additional reset line, OCP(Open Core Protocol),
that also needs to get deasserted for the stmmac ethernet controller to work.
Thus we need to update the Kconfig to include ARCH_STRATIX10 in order to build
dwmac-socfpga.

Also, remove the redundant check for the reset controller pointer. The
reset driver already checks for the pointer and returns 0 if the pointer
is NULL.
Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE
are friends"), sungem owners reported the infamous "eth0: hw csum failure"
message.

CHECKSUM_COMPLETE has in fact never worked for this driver, but this
was masked by the fact that upper stacks had to strip the FCS, and
therefore skb->ip_summed was set back to CHECKSUM_NONE before
my recent change.

Driver configures a number of bytes to skip when the chip computes
the checksum, and for some reason only half of the Ethernet header
was skipped.

Then a second problem is that we should strip the FCS by default,
unless the driver is updated to eventually support NETIF_F_RXFCS in
the future.

Finally, a driver should check if NETIF_F_RXCSUM feature is enabled
or not, so that the admin can turn off rx checksum if wanted.

Many thanks to Andreas Schwab and Mathieu Malaterre for their
help in debugging this issue.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NMeelis Roos <mroos@linux.ee>
Reported-by: NMathieu Malaterre <malat@debian.org>
Reported-by: NAndreas Schwab <schwab@linux-m68k.org>
Tested-by: NAndreas Schwab <schwab@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/bpfilter/bpfilter_umh is a binary file generated when bpfilter is
enabled, add it to .gitignore to avoid committing it.

Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: NMatteo Croce <mcroce@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bpfilter Makefile assumes that the system locale is en_US, and the
parsing of objdump output fails.
Set LC_ALL=C and, while at it, rewrite the objdump parsing so it spawns
only 2 processes instead of 7.

Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: NMatteo Croce <mcroce@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code does:

 if (hrtimer_active(&t))
    hrtimer_cancel(&t);

However, hrtimer_cancel() checks if the timer is active, so the
test above is pointless.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

in the following script

 # tc actions add action ife encode allow prio pass index 42
 # tc actions replace action ife encode allow tcindex drop index 42

the action control should remain equal to 'pass', if the kernel failed
to replace the TC action. Pospone the assignment of the action control,
to ensure it is not overwritten in the error path of tcf_ife_init().

Fixes: ef6980b6 ("introduce IFE action")
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Acked-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

a recursive lock warning [1] can be observed with the following script,

 # $TC actions add action ife encode allow prio pass index 42
 IFE type 0xED3E
 # $TC actions replace action ife encode allow tcindex pass index 42

in case the kernel was unable to run the last command (e.g. because of
the impossibility to load 'act_meta_skbtcindex'). For a similar reason,
the kernel can leak idr in the error path of tcf_ife_init(), because
tcf_idr_release() is not called after successful idr reservation:

 # $TC actions add action ife encode allow tcindex index 47
 IFE type 0xED3E
 RTNETLINK answers: No such file or directory
 We have an error talking to the kernel
 # $TC actions add action ife encode allow tcindex index 47
 IFE type 0xED3E
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 # $TC actions add action ife encode use mark 7 type 0xfefe pass index 47
 IFE type 0xFEFE
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel

Since tcfa_lock is already taken when the action is being edited, a call
to tcf_idr_release() wrongly makes tcf_idr_cleanup() take the same lock
again. On the other hand, tcf_idr_release() needs to be called in the
error path of tcf_ife_init(), to undo the last tcf_idr_create() invocation.
Fix both problems in tcf_ife_init().
Since the cleanup() routine can now be called when ife->params is NULL,
also add a NULL pointer check to avoid calling kfree_rcu(NULL, rcu).

 [1]
 ============================================
 WARNING: possible recursive locking detected
 4.17.0-rc4.kasan+ #417 Tainted: G            E
 --------------------------------------------
 tc/3932 is trying to acquire lock:
 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_cleanup+0x19/0x80 [act_ife]

 but task is already holding lock:
 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_init+0xf6d/0x13c0 [act_ife]

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&(&p->tcfa_lock)->rlock);
   lock(&(&p->tcfa_lock)->rlock);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 2 locks held by tc/3932:
  #0: 000000007ca8e990 (rtnl_mutex){+.+.}, at: tcf_ife_init+0xf61/0x13c0 [act_ife]
  #1: 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_init+0xf6d/0x13c0 [act_ife]

 stack backtrace:
 CPU: 3 PID: 3932 Comm: tc Tainted: G            E     4.17.0-rc4.kasan+ #417
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 Call Trace:
  dump_stack+0x9a/0xeb
  __lock_acquire+0xf43/0x34a0
  ? debug_check_no_locks_freed+0x2b0/0x2b0
  ? debug_check_no_locks_freed+0x2b0/0x2b0
  ? debug_check_no_locks_freed+0x2b0/0x2b0
  ? __mutex_lock+0x62f/0x1240
  ? kvm_sched_clock_read+0x1a/0x30
  ? sched_clock+0x5/0x10
  ? sched_clock_cpu+0x18/0x170
  ? find_held_lock+0x39/0x1d0
  ? lock_acquire+0x10b/0x330
  lock_acquire+0x10b/0x330
  ? tcf_ife_cleanup+0x19/0x80 [act_ife]
  _raw_spin_lock_bh+0x38/0x70
  ? tcf_ife_cleanup+0x19/0x80 [act_ife]
  tcf_ife_cleanup+0x19/0x80 [act_ife]
  __tcf_idr_release+0xff/0x350
  tcf_ife_init+0xdde/0x13c0 [act_ife]
  ? ife_exit_net+0x290/0x290 [act_ife]
  ? __lock_is_held+0xb4/0x140
  tcf_action_init_1+0x67b/0xad0
  ? tcf_action_dump_old+0xa0/0xa0
  ? sched_clock+0x5/0x10
  ? sched_clock_cpu+0x18/0x170
  ? kvm_sched_clock_read+0x1a/0x30
  ? sched_clock+0x5/0x10
  ? sched_clock_cpu+0x18/0x170
  ? memset+0x1f/0x40
  tcf_action_init+0x30f/0x590
  ? tcf_action_init_1+0xad0/0xad0
  ? memset+0x1f/0x40
  tc_ctl_action+0x48e/0x5e0
  ? mutex_lock_io_nested+0x1160/0x1160
  ? tca_action_gd+0x990/0x990
  ? sched_clock+0x5/0x10
  ? find_held_lock+0x39/0x1d0
  rtnetlink_rcv_msg+0x4da/0x990
  ? validate_linkmsg+0x680/0x680
  ? sched_clock_cpu+0x18/0x170
  ? find_held_lock+0x39/0x1d0
  netlink_rcv_skb+0x127/0x350
  ? validate_linkmsg+0x680/0x680
  ? netlink_ack+0x970/0x970
  ? __kmalloc_node_track_caller+0x304/0x3a0
  netlink_unicast+0x40f/0x5d0
  ? netlink_attachskb+0x580/0x580
  ? _copy_from_iter_full+0x187/0x760
  ? import_iovec+0x90/0x390
  netlink_sendmsg+0x67f/0xb50
  ? netlink_unicast+0x5d0/0x5d0
  ? copy_msghdr_from_user+0x206/0x340
  ? netlink_unicast+0x5d0/0x5d0
  sock_sendmsg+0xb3/0xf0
  ___sys_sendmsg+0x60a/0x8b0
  ? copy_msghdr_from_user+0x340/0x340
  ? lock_downgrade+0x5e0/0x5e0
  ? tty_write_lock+0x18/0x50
  ? kvm_sched_clock_read+0x1a/0x30
  ? sched_clock+0x5/0x10
  ? sched_clock_cpu+0x18/0x170
  ? find_held_lock+0x39/0x1d0
  ? lock_downgrade+0x5e0/0x5e0
  ? lock_acquire+0x10b/0x330
  ? __audit_syscall_entry+0x316/0x690
  ? current_kernel_time64+0x6b/0xd0
  ? __fget_light+0x55/0x1f0
  ? __sys_sendmsg+0xd2/0x170
  __sys_sendmsg+0xd2/0x170
  ? __ia32_sys_shutdown+0x70/0x70
  ? syscall_trace_enter+0x57a/0xd60
  ? rcu_read_lock_sched_held+0xdc/0x110
  ? __bpf_trace_sys_enter+0x10/0x10
  ? do_syscall_64+0x22/0x480
  do_syscall_64+0xa5/0x480
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
 RIP: 0033:0x7fd646988ba0
 RSP: 002b:00007fffc9fab3c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 00007fffc9fab4f0 RCX: 00007fd646988ba0
 RDX: 0000000000000000 RSI: 00007fffc9fab440 RDI: 0000000000000003
 RBP: 000000005b28c8b3 R08: 0000000000000002 R09: 0000000000000000
 R10: 00007fffc9faae20 R11: 0000000000000246 R12: 0000000000000000
 R13: 00007fffc9fab504 R14: 0000000000000001 R15: 000000000066c100

Fixes: 4e8c8615 ("net sched: net sched: ife action fix late binding")
Fixes: ef6980b6 ("introduce IFE action")
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Acked-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch reverts commit 3243ff2a ("net: ethernet: davinci_emac:
Deduplicate bus_find_device() by name matching") and adds a comment
which should stop anyone from reintroducing the same "fix" in the future.

We can't use bus_find_device_by_name() here because the device name is
not guaranteed to be 'davinci_mdio'. On some systems it can be
'davinci_mdio.0' so we need to use strncmp() against the first part of
the string to correctly match it.

Fixes: 3243ff2a ("net: ethernet: davinci_emac: Deduplicate bus_find_device() by name matching")
Cc: stable@vger.kernel.org
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

if dev_get_valid_name failed, propagate its return code

and remove the setting err to ENODEV, it will be set to
0 again before dev_change_net_namespace exits.
Signed-off-by: NLi RongQing <lirongqing@baidu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In failure path, we overwrite err to what vnic_rq_disable() returns. In
case it returns 0, enic_open() returns success in case of error.
Reported-by: NBen Hutchings <ben.hutchings@codethink.co.uk>
Fixes: e8588e26 ("enic: enable rq before updating rq descriptors")
Signed-off-by: NGovindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>